Developing integrated methods to address complex resource and environmental issues Article Swipe

Magnetic susceptibility magnetic susceptibility (SI) 1/(4π)=0.079577magnetic susceptibility (cgs or electromagnetic unit per cubic centimeter [emu/cm 3 ]) Density kilogram per cubic meter (kg/m 3 ) 0.001 grams per cubic centimeter (g/cm 3 ) Hydraulic conductivity meter per day (m/d) 3.281 foot per day (ft/d) Hydraulic gradient meter per kilometer (m/km) 5.27983 foot per mile (ft/mi) Transmissivity* meter squared per day (m 2 /d) 10.76 foot squared per day (ft 2 /d)Temperature in degrees Celsius (°C) may be converted to degrees Fahrenheit (°F) as follows:Temperature in degrees Fahrenheit (°F) may be converted to degrees Celsius (°C) as follows:°C=(°F-32)/1.8Vertical coordinate information is referenced to the insert datum name (and abbreviation) here, for instance, "North American Vertical Datum of 1988 (NAVD 88)"Horizontal coordinate information is referenced to the insert datum name (and abbreviation) here, for instance, "North American Datum of 1983 (NAD 83)"Altitude, as used in this report, refers to distance above the vertical datum.*Transmissivity: The standard unit for transmissivity is cubic foot per day per square foot times foot of aquifer thickness [(ft 3 /d)/ft 2 ]ft.In this report, the mathematically reduced form, foot squared per day (ft 2 /d), is used for convenience.Specific conductance is given in microsiemens per centimeter at 25 degrees Celsius (µS/cm at 25 °C).Electrical conductivity is given in microsiemens per centimeters (µS/cm).Resistivity is given in ohm-meters.Concentrations of chemical constituents in water are given either in milligrams per liter (mg/L) or micrograms per liter (µg/L). Conversion Factors-ContinuedSI to Inch/Pound Multiply By To obtain v Contents