Effect of interface on mechanical properties and formability of Ti/Al/Ti laminated composites Article Swipe
YOU?
·
· 2021
· Open Access
·
· DOI: https://doi.org/10.1016/j.jmrt.2021.07.021
Ti/Al/Ti laminated composites were prepared by hot-pressing and hot-rolling. Subsequent annealing was used to adjust Ti/Al interface. Then the influence of interface on the mechanical properties and formability of Ti/Al/Ti laminated composites was investigated. The results indicate that the diffusion rate between Ti and Al atoms increases with the increase of annealing temperature, which widens the diffusion layer and promotes the formation of TiAl3 phase. The Ti/Al interfacial bonding strength enhances gradually as the annealing temperature increased from 200 to 400 °C. However, the bonding strength is deteriorated significantly as the annealing temperature exceeds 400 °C owing to the coarse TiAl3 phase. The strength of Ti/Al/Ti laminated composites decreases gradually, whereas the elongation and Erichsen cupping formability are greatly affected by the interfacial bonding strength with the increase of annealing temperature. As the temperature increased from 200 to 400 °C, the increased interfacial bonding strength is beneficial to delay the premature necking and fracture of Ti/Al/Ti laminated composites, thereby improving their ductility. The coarsened TiAl3 phase is easy to induce interfacial debonding with the further increase of annealing temperature. The crack deflection and passivation at the debonding can effectively suppress the crack propagation, which improves the ductility and formability of Ti/Al/Ti laminated composites unexpectedly. Especially the thick and coarse TiAl3 phases are generated for Ti/Al/Ti laminated composites when annealed at 550 °C, but they show excellent elongation and formability. Which is attributed to the energy consumption by crack initiation at Ti/Al interface, thus the fracture failure of Ti/Al/Ti laminated composites is delayed.
Related Topics
- Type
- article
- Language
- en
- Landing Page
- https://doi.org/10.1016/j.jmrt.2021.07.021
- OA Status
- gold
- Cited By
- 78
- References
- 35
- Related Works
- 10
- OpenAlex ID
- https://openalex.org/W3185576805
Raw OpenAlex JSON
- OpenAlex ID
-
https://openalex.org/W3185576805Canonical identifier for this work in OpenAlex
- DOI
-
https://doi.org/10.1016/j.jmrt.2021.07.021Digital Object Identifier
- Title
-
Effect of interface on mechanical properties and formability of Ti/Al/Ti laminated compositesWork title
- Type
-
articleOpenAlex work type
- Language
-
enPrimary language
- Publication year
-
2021Year of publication
- Publication date
-
2021-07-17Full publication date if available
- Authors
-
Miao Cao, Cui-ju Wang, Kun-kun Deng, Kai-bo Nie, Wei Liang, Yucheng WuList of authors in order
- Landing page
-
https://doi.org/10.1016/j.jmrt.2021.07.021Publisher landing page
- Open access
-
YesWhether a free full text is available
- OA status
-
goldOpen access status per OpenAlex
- OA URL
-
https://doi.org/10.1016/j.jmrt.2021.07.021Direct OA link when available
- Concepts
-
Materials science, Annealing (glass), Composite material, Formability, Accumulative roll bonding, Ductility (Earth science), Microstructure, CreepTop concepts (fields/topics) attached by OpenAlex
- Cited by
-
78Total citation count in OpenAlex
- Citations by year (recent)
-
2025: 22, 2024: 20, 2023: 24, 2022: 12Per-year citation counts (last 5 years)
- References (count)
-
35Number of works referenced by this work
- Related works (count)
-
10Other works algorithmically related by OpenAlex
Full payload
| id | https://openalex.org/W3185576805 |
|---|---|
| doi | https://doi.org/10.1016/j.jmrt.2021.07.021 |
| ids.doi | https://doi.org/10.1016/j.jmrt.2021.07.021 |
| ids.mag | 3185576805 |
| ids.openalex | https://openalex.org/W3185576805 |
| fwci | 6.56412458 |
| type | article |
| title | Effect of interface on mechanical properties and formability of Ti/Al/Ti laminated composites |
| biblio.issue | |
| biblio.volume | 14 |
| biblio.last_page | 1669 |
| biblio.first_page | 1655 |
| topics[0].id | https://openalex.org/T10723 |
| topics[0].field.id | https://openalex.org/fields/22 |
| topics[0].field.display_name | Engineering |
| topics[0].score | 0.9998999834060669 |
| topics[0].domain.id | https://openalex.org/domains/3 |
| topics[0].domain.display_name | Physical Sciences |
| topics[0].subfield.id | https://openalex.org/subfields/2210 |
| topics[0].subfield.display_name | Mechanical Engineering |
| topics[0].display_name | Advanced Welding Techniques Analysis |
| topics[1].id | https://openalex.org/T10717 |
| topics[1].field.id | https://openalex.org/fields/22 |
| topics[1].field.display_name | Engineering |
| topics[1].score | 0.9995999932289124 |
| topics[1].domain.id | https://openalex.org/domains/3 |
| topics[1].domain.display_name | Physical Sciences |
| topics[1].subfield.id | https://openalex.org/subfields/2210 |
| topics[1].subfield.display_name | Mechanical Engineering |
| topics[1].display_name | Aluminum Alloys Composites Properties |
| topics[2].id | https://openalex.org/T11100 |
| topics[2].field.id | https://openalex.org/fields/22 |
| topics[2].field.display_name | Engineering |
| topics[2].score | 0.9994999766349792 |
| topics[2].domain.id | https://openalex.org/domains/3 |
| topics[2].domain.display_name | Physical Sciences |
| topics[2].subfield.id | https://openalex.org/subfields/2210 |
| topics[2].subfield.display_name | Mechanical Engineering |
| topics[2].display_name | Intermetallics and Advanced Alloy Properties |
| is_xpac | False |
| apc_list.value | 1300 |
| apc_list.currency | USD |
| apc_list.value_usd | 1300 |
| apc_paid.value | 1300 |
| apc_paid.currency | USD |
| apc_paid.value_usd | 1300 |
| concepts[0].id | https://openalex.org/C192562407 |
| concepts[0].level | 0 |
| concepts[0].score | 0.956383228302002 |
| concepts[0].wikidata | https://www.wikidata.org/wiki/Q228736 |
| concepts[0].display_name | Materials science |
| concepts[1].id | https://openalex.org/C2777855556 |
| concepts[1].level | 2 |
| concepts[1].score | 0.7680277824401855 |
| concepts[1].wikidata | https://www.wikidata.org/wiki/Q4339544 |
| concepts[1].display_name | Annealing (glass) |
| concepts[2].id | https://openalex.org/C159985019 |
| concepts[2].level | 1 |
| concepts[2].score | 0.7583503723144531 |
| concepts[2].wikidata | https://www.wikidata.org/wiki/Q181790 |
| concepts[2].display_name | Composite material |
| concepts[3].id | https://openalex.org/C79127381 |
| concepts[3].level | 2 |
| concepts[3].score | 0.7232409715652466 |
| concepts[3].wikidata | https://www.wikidata.org/wiki/Q5469940 |
| concepts[3].display_name | Formability |
| concepts[4].id | https://openalex.org/C2777777420 |
| concepts[4].level | 3 |
| concepts[4].score | 0.47135084867477417 |
| concepts[4].wikidata | https://www.wikidata.org/wiki/Q4672904 |
| concepts[4].display_name | Accumulative roll bonding |
| concepts[5].id | https://openalex.org/C2776512210 |
| concepts[5].level | 3 |
| concepts[5].score | 0.4230199158191681 |
| concepts[5].wikidata | https://www.wikidata.org/wiki/Q5311608 |
| concepts[5].display_name | Ductility (Earth science) |
| concepts[6].id | https://openalex.org/C87976508 |
| concepts[6].level | 2 |
| concepts[6].score | 0.39630886912345886 |
| concepts[6].wikidata | https://www.wikidata.org/wiki/Q1498213 |
| concepts[6].display_name | Microstructure |
| concepts[7].id | https://openalex.org/C149912024 |
| concepts[7].level | 2 |
| concepts[7].score | 0.0 |
| concepts[7].wikidata | https://www.wikidata.org/wiki/Q462188 |
| concepts[7].display_name | Creep |
| keywords[0].id | https://openalex.org/keywords/materials-science |
| keywords[0].score | 0.956383228302002 |
| keywords[0].display_name | Materials science |
| keywords[1].id | https://openalex.org/keywords/annealing |
| keywords[1].score | 0.7680277824401855 |
| keywords[1].display_name | Annealing (glass) |
| keywords[2].id | https://openalex.org/keywords/composite-material |
| keywords[2].score | 0.7583503723144531 |
| keywords[2].display_name | Composite material |
| keywords[3].id | https://openalex.org/keywords/formability |
| keywords[3].score | 0.7232409715652466 |
| keywords[3].display_name | Formability |
| keywords[4].id | https://openalex.org/keywords/accumulative-roll-bonding |
| keywords[4].score | 0.47135084867477417 |
| keywords[4].display_name | Accumulative roll bonding |
| keywords[5].id | https://openalex.org/keywords/ductility |
| keywords[5].score | 0.4230199158191681 |
| keywords[5].display_name | Ductility (Earth science) |
| keywords[6].id | https://openalex.org/keywords/microstructure |
| keywords[6].score | 0.39630886912345886 |
| keywords[6].display_name | Microstructure |
| language | en |
| locations[0].id | doi:10.1016/j.jmrt.2021.07.021 |
| locations[0].is_oa | True |
| locations[0].source.id | https://openalex.org/S2765010971 |
| locations[0].source.issn | 2214-0697, 2238-7854 |
| locations[0].source.type | journal |
| locations[0].source.is_oa | True |
| locations[0].source.issn_l | 2214-0697 |
| locations[0].source.is_core | True |
| locations[0].source.is_in_doaj | True |
| locations[0].source.display_name | Journal of Materials Research and Technology |
| locations[0].source.host_organization | https://openalex.org/P4310320990 |
| locations[0].source.host_organization_name | Elsevier BV |
| locations[0].source.host_organization_lineage | https://openalex.org/P4310320990 |
| locations[0].source.host_organization_lineage_names | Elsevier BV |
| locations[0].license | cc-by-nc-nd |
| locations[0].pdf_url | |
| locations[0].version | publishedVersion |
| locations[0].raw_type | journal-article |
| locations[0].license_id | https://openalex.org/licenses/cc-by-nc-nd |
| locations[0].is_accepted | True |
| locations[0].is_published | True |
| locations[0].raw_source_name | Journal of Materials Research and Technology |
| locations[0].landing_page_url | https://doi.org/10.1016/j.jmrt.2021.07.021 |
| locations[1].id | pmh:oai:doaj.org/article:fb9e3dd85d364c2fbf69ae42128b25e3 |
| locations[1].is_oa | True |
| locations[1].source.id | https://openalex.org/S4306401280 |
| locations[1].source.issn | |
| locations[1].source.type | repository |
| locations[1].source.is_oa | False |
| locations[1].source.issn_l | |
| locations[1].source.is_core | False |
| locations[1].source.is_in_doaj | False |
| locations[1].source.display_name | DOAJ (DOAJ: Directory of Open Access Journals) |
| locations[1].source.host_organization | |
| locations[1].source.host_organization_name | |
| locations[1].license | cc-by-sa |
| locations[1].pdf_url | |
| locations[1].version | submittedVersion |
| locations[1].raw_type | article |
| locations[1].license_id | https://openalex.org/licenses/cc-by-sa |
| locations[1].is_accepted | False |
| locations[1].is_published | False |
| locations[1].raw_source_name | Journal of Materials Research and Technology, Vol 14, Iss , Pp 1655-1669 (2021) |
| locations[1].landing_page_url | https://doaj.org/article/fb9e3dd85d364c2fbf69ae42128b25e3 |
| indexed_in | crossref, doaj |
| authorships[0].author.id | https://openalex.org/A5010070743 |
| authorships[0].author.orcid | https://orcid.org/0000-0001-7254-5227 |
| authorships[0].author.display_name | Miao Cao |
| authorships[0].countries | CN |
| authorships[0].affiliations[0].institution_ids | https://openalex.org/I9086337 |
| authorships[0].affiliations[0].raw_affiliation_string | Shanxi Key Laboratory of Advanced Magnesium-based Materials, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, PR China |
| authorships[0].institutions[0].id | https://openalex.org/I9086337 |
| authorships[0].institutions[0].ror | https://ror.org/03kv08d37 |
| authorships[0].institutions[0].type | education |
| authorships[0].institutions[0].lineage | https://openalex.org/I9086337 |
| authorships[0].institutions[0].country_code | CN |
| authorships[0].institutions[0].display_name | Taiyuan University of Technology |
| authorships[0].author_position | first |
| authorships[0].raw_author_name | Miao Cao |
| authorships[0].is_corresponding | False |
| authorships[0].raw_affiliation_strings | Shanxi Key Laboratory of Advanced Magnesium-based Materials, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, PR China |
| authorships[1].author.id | https://openalex.org/A5111560884 |
| authorships[1].author.orcid | |
| authorships[1].author.display_name | Cui-ju Wang |
| authorships[1].countries | CN |
| authorships[1].affiliations[0].institution_ids | https://openalex.org/I9086337 |
| authorships[1].affiliations[0].raw_affiliation_string | Shanxi Key Laboratory of Advanced Magnesium-based Materials, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, PR China |
| authorships[1].institutions[0].id | https://openalex.org/I9086337 |
| authorships[1].institutions[0].ror | https://ror.org/03kv08d37 |
| authorships[1].institutions[0].type | education |
| authorships[1].institutions[0].lineage | https://openalex.org/I9086337 |
| authorships[1].institutions[0].country_code | CN |
| authorships[1].institutions[0].display_name | Taiyuan University of Technology |
| authorships[1].author_position | middle |
| authorships[1].raw_author_name | Cui-ju Wang |
| authorships[1].is_corresponding | False |
| authorships[1].raw_affiliation_strings | Shanxi Key Laboratory of Advanced Magnesium-based Materials, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, PR China |
| authorships[2].author.id | https://openalex.org/A5091248760 |
| authorships[2].author.orcid | https://orcid.org/0000-0002-0189-9172 |
| authorships[2].author.display_name | Kun-kun Deng |
| authorships[2].countries | CN |
| authorships[2].affiliations[0].institution_ids | https://openalex.org/I9086337 |
| authorships[2].affiliations[0].raw_affiliation_string | Shanxi Key Laboratory of Advanced Magnesium-based Materials, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, PR China |
| authorships[2].affiliations[1].institution_ids | https://openalex.org/I9086337 |
| authorships[2].affiliations[1].raw_affiliation_string | Key Laboratory of Interface Science and Engineering in Advanced Materials, Ministry of Education, Taiyuan University of Technology, Taiyuan 030024, PR China |
| authorships[2].institutions[0].id | https://openalex.org/I9086337 |
| authorships[2].institutions[0].ror | https://ror.org/03kv08d37 |
| authorships[2].institutions[0].type | education |
| authorships[2].institutions[0].lineage | https://openalex.org/I9086337 |
| authorships[2].institutions[0].country_code | CN |
| authorships[2].institutions[0].display_name | Taiyuan University of Technology |
| authorships[2].author_position | middle |
| authorships[2].raw_author_name | Kun-kun Deng |
| authorships[2].is_corresponding | True |
| authorships[2].raw_affiliation_strings | Key Laboratory of Interface Science and Engineering in Advanced Materials, Ministry of Education, Taiyuan University of Technology, Taiyuan 030024, PR China, Shanxi Key Laboratory of Advanced Magnesium-based Materials, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, PR China |
| authorships[3].author.id | https://openalex.org/A5065630747 |
| authorships[3].author.orcid | https://orcid.org/0000-0001-6993-1186 |
| authorships[3].author.display_name | Kai-bo Nie |
| authorships[3].countries | CN |
| authorships[3].affiliations[0].institution_ids | https://openalex.org/I9086337 |
| authorships[3].affiliations[0].raw_affiliation_string | Shanxi Key Laboratory of Advanced Magnesium-based Materials, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, PR China |
| authorships[3].institutions[0].id | https://openalex.org/I9086337 |
| authorships[3].institutions[0].ror | https://ror.org/03kv08d37 |
| authorships[3].institutions[0].type | education |
| authorships[3].institutions[0].lineage | https://openalex.org/I9086337 |
| authorships[3].institutions[0].country_code | CN |
| authorships[3].institutions[0].display_name | Taiyuan University of Technology |
| authorships[3].author_position | middle |
| authorships[3].raw_author_name | Kai-bo Nie |
| authorships[3].is_corresponding | False |
| authorships[3].raw_affiliation_strings | Shanxi Key Laboratory of Advanced Magnesium-based Materials, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, PR China |
| authorships[4].author.id | https://openalex.org/A5114250587 |
| authorships[4].author.orcid | https://orcid.org/0009-0007-2798-3077 |
| authorships[4].author.display_name | Wei Liang |
| authorships[4].countries | CN |
| authorships[4].affiliations[0].institution_ids | https://openalex.org/I9086337 |
| authorships[4].affiliations[0].raw_affiliation_string | Shanxi Key Laboratory of Advanced Magnesium-based Materials, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, PR China |
| authorships[4].institutions[0].id | https://openalex.org/I9086337 |
| authorships[4].institutions[0].ror | https://ror.org/03kv08d37 |
| authorships[4].institutions[0].type | education |
| authorships[4].institutions[0].lineage | https://openalex.org/I9086337 |
| authorships[4].institutions[0].country_code | CN |
| authorships[4].institutions[0].display_name | Taiyuan University of Technology |
| authorships[4].author_position | middle |
| authorships[4].raw_author_name | Wei Liang |
| authorships[4].is_corresponding | False |
| authorships[4].raw_affiliation_strings | Shanxi Key Laboratory of Advanced Magnesium-based Materials, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, PR China |
| authorships[5].author.id | https://openalex.org/A5000234334 |
| authorships[5].author.orcid | https://orcid.org/0000-0002-8231-8172 |
| authorships[5].author.display_name | Yucheng Wu |
| authorships[5].countries | CN |
| authorships[5].affiliations[0].institution_ids | https://openalex.org/I9086337 |
| authorships[5].affiliations[0].raw_affiliation_string | Shanxi Key Laboratory of Advanced Magnesium-based Materials, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, PR China |
| authorships[5].affiliations[1].institution_ids | https://openalex.org/I9086337 |
| authorships[5].affiliations[1].raw_affiliation_string | Key Laboratory of Interface Science and Engineering in Advanced Materials, Ministry of Education, Taiyuan University of Technology, Taiyuan 030024, PR China |
| authorships[5].institutions[0].id | https://openalex.org/I9086337 |
| authorships[5].institutions[0].ror | https://ror.org/03kv08d37 |
| authorships[5].institutions[0].type | education |
| authorships[5].institutions[0].lineage | https://openalex.org/I9086337 |
| authorships[5].institutions[0].country_code | CN |
| authorships[5].institutions[0].display_name | Taiyuan University of Technology |
| authorships[5].author_position | last |
| authorships[5].raw_author_name | Yu-cheng Wu |
| authorships[5].is_corresponding | False |
| authorships[5].raw_affiliation_strings | Key Laboratory of Interface Science and Engineering in Advanced Materials, Ministry of Education, Taiyuan University of Technology, Taiyuan 030024, PR China, Shanxi Key Laboratory of Advanced Magnesium-based Materials, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, PR China |
| has_content.pdf | False |
| has_content.grobid_xml | False |
| is_paratext | False |
| open_access.is_oa | True |
| open_access.oa_url | https://doi.org/10.1016/j.jmrt.2021.07.021 |
| open_access.oa_status | gold |
| open_access.any_repository_has_fulltext | False |
| created_date | 2025-10-10T00:00:00 |
| display_name | Effect of interface on mechanical properties and formability of Ti/Al/Ti laminated composites |
| has_fulltext | False |
| is_retracted | False |
| updated_date | 2025-11-06T03:46:38.306776 |
| primary_topic.id | https://openalex.org/T10723 |
| primary_topic.field.id | https://openalex.org/fields/22 |
| primary_topic.field.display_name | Engineering |
| primary_topic.score | 0.9998999834060669 |
| primary_topic.domain.id | https://openalex.org/domains/3 |
| primary_topic.domain.display_name | Physical Sciences |
| primary_topic.subfield.id | https://openalex.org/subfields/2210 |
| primary_topic.subfield.display_name | Mechanical Engineering |
| primary_topic.display_name | Advanced Welding Techniques Analysis |
| related_works | https://openalex.org/W1972552943, https://openalex.org/W4285249156, https://openalex.org/W2769074429, https://openalex.org/W2510207099, https://openalex.org/W2810458985, https://openalex.org/W4293237921, https://openalex.org/W2073584971, https://openalex.org/W3207674606, https://openalex.org/W3016604501, https://openalex.org/W2030673969 |
| cited_by_count | 78 |
| counts_by_year[0].year | 2025 |
| counts_by_year[0].cited_by_count | 22 |
| counts_by_year[1].year | 2024 |
| counts_by_year[1].cited_by_count | 20 |
| counts_by_year[2].year | 2023 |
| counts_by_year[2].cited_by_count | 24 |
| counts_by_year[3].year | 2022 |
| counts_by_year[3].cited_by_count | 12 |
| locations_count | 2 |
| best_oa_location.id | doi:10.1016/j.jmrt.2021.07.021 |
| best_oa_location.is_oa | True |
| best_oa_location.source.id | https://openalex.org/S2765010971 |
| best_oa_location.source.issn | 2214-0697, 2238-7854 |
| best_oa_location.source.type | journal |
| best_oa_location.source.is_oa | True |
| best_oa_location.source.issn_l | 2214-0697 |
| best_oa_location.source.is_core | True |
| best_oa_location.source.is_in_doaj | True |
| best_oa_location.source.display_name | Journal of Materials Research and Technology |
| best_oa_location.source.host_organization | https://openalex.org/P4310320990 |
| best_oa_location.source.host_organization_name | Elsevier BV |
| best_oa_location.source.host_organization_lineage | https://openalex.org/P4310320990 |
| best_oa_location.source.host_organization_lineage_names | Elsevier BV |
| best_oa_location.license | cc-by-nc-nd |
| best_oa_location.pdf_url | |
| best_oa_location.version | publishedVersion |
| best_oa_location.raw_type | journal-article |
| best_oa_location.license_id | https://openalex.org/licenses/cc-by-nc-nd |
| best_oa_location.is_accepted | True |
| best_oa_location.is_published | True |
| best_oa_location.raw_source_name | Journal of Materials Research and Technology |
| best_oa_location.landing_page_url | https://doi.org/10.1016/j.jmrt.2021.07.021 |
| primary_location.id | doi:10.1016/j.jmrt.2021.07.021 |
| primary_location.is_oa | True |
| primary_location.source.id | https://openalex.org/S2765010971 |
| primary_location.source.issn | 2214-0697, 2238-7854 |
| primary_location.source.type | journal |
| primary_location.source.is_oa | True |
| primary_location.source.issn_l | 2214-0697 |
| primary_location.source.is_core | True |
| primary_location.source.is_in_doaj | True |
| primary_location.source.display_name | Journal of Materials Research and Technology |
| primary_location.source.host_organization | https://openalex.org/P4310320990 |
| primary_location.source.host_organization_name | Elsevier BV |
| primary_location.source.host_organization_lineage | https://openalex.org/P4310320990 |
| primary_location.source.host_organization_lineage_names | Elsevier BV |
| primary_location.license | cc-by-nc-nd |
| primary_location.pdf_url | |
| primary_location.version | publishedVersion |
| primary_location.raw_type | journal-article |
| primary_location.license_id | https://openalex.org/licenses/cc-by-nc-nd |
| primary_location.is_accepted | True |
| primary_location.is_published | True |
| primary_location.raw_source_name | Journal of Materials Research and Technology |
| primary_location.landing_page_url | https://doi.org/10.1016/j.jmrt.2021.07.021 |
| publication_date | 2021-07-17 |
| publication_year | 2021 |
| referenced_works | https://openalex.org/W2060927389, https://openalex.org/W2922549505, https://openalex.org/W2564971848, https://openalex.org/W1994086494, https://openalex.org/W2300309521, https://openalex.org/W2974321974, https://openalex.org/W2005157818, https://openalex.org/W2970056939, https://openalex.org/W2972840495, https://openalex.org/W2811084283, https://openalex.org/W2802302912, https://openalex.org/W3016484531, https://openalex.org/W2068053931, https://openalex.org/W2077024136, https://openalex.org/W2975494598, https://openalex.org/W2574444359, https://openalex.org/W2291058590, https://openalex.org/W2802907121, https://openalex.org/W2525028060, https://openalex.org/W2981465792, https://openalex.org/W2022065285, https://openalex.org/W2970229302, https://openalex.org/W2971147995, https://openalex.org/W2036027238, https://openalex.org/W2163291354, https://openalex.org/W2021535892, https://openalex.org/W1673463261, https://openalex.org/W2972374259, https://openalex.org/W2107613574, https://openalex.org/W2210636404, https://openalex.org/W1964384691, https://openalex.org/W2905655164, https://openalex.org/W2600638353, https://openalex.org/W2009229974, https://openalex.org/W2946099790 |
| referenced_works_count | 35 |
| abstract_inverted_index.Al | 44 |
| abstract_inverted_index.As | 131 |
| abstract_inverted_index.Ti | 42 |
| abstract_inverted_index.as | 72, 89 |
| abstract_inverted_index.at | 184, 219, 239 |
| abstract_inverted_index.by | 5, 120, 236 |
| abstract_inverted_index.is | 86, 145, 166, 230, 250 |
| abstract_inverted_index.of | 20, 28, 50, 62, 104, 128, 154, 176, 199, 246 |
| abstract_inverted_index.on | 22 |
| abstract_inverted_index.to | 13, 79, 97, 137, 147, 168, 232 |
| abstract_inverted_index.200 | 78, 136 |
| abstract_inverted_index.400 | 80, 94, 138 |
| abstract_inverted_index.550 | 220 |
| abstract_inverted_index.The | 34, 65, 102, 162, 179 |
| abstract_inverted_index.and | 7, 26, 43, 58, 113, 152, 182, 197, 207, 227 |
| abstract_inverted_index.are | 117, 211 |
| abstract_inverted_index.but | 222 |
| abstract_inverted_index.can | 187 |
| abstract_inverted_index.for | 213 |
| abstract_inverted_index.the | 18, 23, 38, 48, 55, 60, 73, 83, 90, 98, 111, 121, 126, 132, 140, 149, 173, 185, 190, 195, 205, 233, 243 |
| abstract_inverted_index.was | 11, 32 |
| abstract_inverted_index.°C | 95 |
| abstract_inverted_index.Then | 17 |
| abstract_inverted_index.easy | 167 |
| abstract_inverted_index.from | 77, 135 |
| abstract_inverted_index.rate | 40 |
| abstract_inverted_index.show | 224 |
| abstract_inverted_index.that | 37 |
| abstract_inverted_index.they | 223 |
| abstract_inverted_index.thus | 242 |
| abstract_inverted_index.used | 12 |
| abstract_inverted_index.were | 3 |
| abstract_inverted_index.when | 217 |
| abstract_inverted_index.with | 47, 125, 172 |
| abstract_inverted_index.°C, | 139, 221 |
| abstract_inverted_index.°C. | 81 |
| abstract_inverted_index.Ti/Al | 15, 66, 240 |
| abstract_inverted_index.TiAl3 | 63, 100, 164, 209 |
| abstract_inverted_index.Which | 229 |
| abstract_inverted_index.atoms | 45 |
| abstract_inverted_index.crack | 180, 191, 237 |
| abstract_inverted_index.delay | 148 |
| abstract_inverted_index.layer | 57 |
| abstract_inverted_index.owing | 96 |
| abstract_inverted_index.phase | 165 |
| abstract_inverted_index.their | 160 |
| abstract_inverted_index.thick | 206 |
| abstract_inverted_index.which | 53, 193 |
| abstract_inverted_index.adjust | 14 |
| abstract_inverted_index.coarse | 99, 208 |
| abstract_inverted_index.energy | 234 |
| abstract_inverted_index.induce | 169 |
| abstract_inverted_index.phase. | 64, 101 |
| abstract_inverted_index.phases | 210 |
| abstract_inverted_index.widens | 54 |
| abstract_inverted_index.between | 41 |
| abstract_inverted_index.bonding | 68, 84, 123, 143 |
| abstract_inverted_index.cupping | 115 |
| abstract_inverted_index.exceeds | 93 |
| abstract_inverted_index.failure | 245 |
| abstract_inverted_index.further | 174 |
| abstract_inverted_index.greatly | 118 |
| abstract_inverted_index.necking | 151 |
| abstract_inverted_index.results | 35 |
| abstract_inverted_index.thereby | 158 |
| abstract_inverted_index.whereas | 110 |
| abstract_inverted_index.Erichsen | 114 |
| abstract_inverted_index.However, | 82 |
| abstract_inverted_index.Ti/Al/Ti | 0, 29, 105, 155, 200, 214, 247 |
| abstract_inverted_index.affected | 119 |
| abstract_inverted_index.annealed | 218 |
| abstract_inverted_index.delayed. | 251 |
| abstract_inverted_index.enhances | 70 |
| abstract_inverted_index.fracture | 153, 244 |
| abstract_inverted_index.improves | 194 |
| abstract_inverted_index.increase | 49, 127, 175 |
| abstract_inverted_index.indicate | 36 |
| abstract_inverted_index.prepared | 4 |
| abstract_inverted_index.promotes | 59 |
| abstract_inverted_index.strength | 69, 85, 103, 124, 144 |
| abstract_inverted_index.suppress | 189 |
| abstract_inverted_index.annealing | 10, 51, 74, 91, 129, 177 |
| abstract_inverted_index.coarsened | 163 |
| abstract_inverted_index.debonding | 171, 186 |
| abstract_inverted_index.decreases | 108 |
| abstract_inverted_index.diffusion | 39, 56 |
| abstract_inverted_index.ductility | 196 |
| abstract_inverted_index.excellent | 225 |
| abstract_inverted_index.formation | 61 |
| abstract_inverted_index.generated | 212 |
| abstract_inverted_index.gradually | 71 |
| abstract_inverted_index.improving | 159 |
| abstract_inverted_index.increased | 76, 134, 141 |
| abstract_inverted_index.increases | 46 |
| abstract_inverted_index.influence | 19 |
| abstract_inverted_index.interface | 21 |
| abstract_inverted_index.laminated | 1, 30, 106, 156, 201, 215, 248 |
| abstract_inverted_index.premature | 150 |
| abstract_inverted_index.Especially | 204 |
| abstract_inverted_index.Subsequent | 9 |
| abstract_inverted_index.attributed | 231 |
| abstract_inverted_index.beneficial | 146 |
| abstract_inverted_index.composites | 2, 31, 107, 202, 216, 249 |
| abstract_inverted_index.deflection | 181 |
| abstract_inverted_index.ductility. | 161 |
| abstract_inverted_index.elongation | 112, 226 |
| abstract_inverted_index.gradually, | 109 |
| abstract_inverted_index.initiation | 238 |
| abstract_inverted_index.interface, | 241 |
| abstract_inverted_index.interface. | 16 |
| abstract_inverted_index.mechanical | 24 |
| abstract_inverted_index.properties | 25 |
| abstract_inverted_index.composites, | 157 |
| abstract_inverted_index.consumption | 235 |
| abstract_inverted_index.effectively | 188 |
| abstract_inverted_index.formability | 27, 116, 198 |
| abstract_inverted_index.interfacial | 67, 122, 142, 170 |
| abstract_inverted_index.passivation | 183 |
| abstract_inverted_index.temperature | 75, 92, 133 |
| abstract_inverted_index.deteriorated | 87 |
| abstract_inverted_index.formability. | 228 |
| abstract_inverted_index.hot-pressing | 6 |
| abstract_inverted_index.hot-rolling. | 8 |
| abstract_inverted_index.propagation, | 192 |
| abstract_inverted_index.temperature, | 52 |
| abstract_inverted_index.temperature. | 130, 178 |
| abstract_inverted_index.investigated. | 33 |
| abstract_inverted_index.significantly | 88 |
| abstract_inverted_index.unexpectedly. | 203 |
| cited_by_percentile_year.max | 100 |
| cited_by_percentile_year.min | 99 |
| corresponding_author_ids | https://openalex.org/A5091248760 |
| countries_distinct_count | 1 |
| institutions_distinct_count | 6 |
| corresponding_institution_ids | https://openalex.org/I9086337 |
| sustainable_development_goals[0].id | https://metadata.un.org/sdg/7 |
| sustainable_development_goals[0].score | 0.9100000262260437 |
| sustainable_development_goals[0].display_name | Affordable and clean energy |
| citation_normalized_percentile.value | 0.97688723 |
| citation_normalized_percentile.is_in_top_1_percent | False |
| citation_normalized_percentile.is_in_top_10_percent | True |