Experimental and Numerical Study on Effect of Weld Reinforcement on Angular Distortion of SAW Square Butt Welded Plates Article Swipe
Harendra Kumar Narang
,
Manas Mohan Mahapatra
,
Pradeep Kumar Jha
,
P. V. S. S. Sridhar
,
Pankaj Biswas
·
YOU?
·
· 2018
· Open Access
·
· DOI: https://doi.org/10.5781/jwj.2018.36.2.8
YOU?
·
· 2018
· Open Access
·
· DOI: https://doi.org/10.5781/jwj.2018.36.2.8
Weld reinforcements play vital role in controlling different formation of inherent strains in the heat-affected zone in arc welded joints. It is desirable to have adequate weld reinforcements on both the top and bottom sides of butt joint such that shrinkage force effects of both the reinforcements would be cancelling the angular distortion. In this study, it has been established by experiments that acceptable top and bottom weld reinforcements can be achieved and angular distortion can be controlled in square butt joints through submerged arc welding (SAW) done from both the sides with accurate control of welding process parameters. Such process does not require use of costly backing strip and instead a flux bed can be used for the purpose. Modeling of the process was also carried out using 3-D thermomechanical finite element (FE) analysis. Moving distributed heat source, weld reinforcements on top and bottom side, weld deposition in each welding pass and temperature dependent thermos-physical properties were used in the thermomechanical analysis for predicting the temperature profiles and angular distortion patterns The numerically predicted temperature distribution and distortion patterns indicated close agreement with the experimentally observed results. Key words: Reinforcement, Moving heat source, Finite element, Thermal analysis, Nonlinear, Elasto-plastic analysis, Distortion
Related Topics
Concepts
Metadata
- Type
- article
- Language
- en
- Landing Page
- https://doi.org/10.5781/jwj.2018.36.2.8
- http://e-jwj.org/upload/jwj-36-2-48.pdf
- OA Status
- hybrid
- Cited By
- 4
- References
- 26
- Related Works
- 10
- OpenAlex ID
- https://openalex.org/W2794914389
All OpenAlex metadata
Raw OpenAlex JSON
- OpenAlex ID
-
https://openalex.org/W2794914389Canonical identifier for this work in OpenAlex
- DOI
-
https://doi.org/10.5781/jwj.2018.36.2.8Digital Object Identifier
- Title
-
Experimental and Numerical Study on Effect of Weld Reinforcement on Angular Distortion of SAW Square Butt Welded PlatesWork title
- Type
-
articleOpenAlex work type
- Language
-
enPrimary language
- Publication year
-
2018Year of publication
- Publication date
-
2018-04-02Full publication date if available
- Authors
-
Harendra Kumar Narang, Manas Mohan Mahapatra, Pradeep Kumar Jha, P. V. S. S. Sridhar, Pankaj BiswasList of authors in order
- Landing page
-
https://doi.org/10.5781/jwj.2018.36.2.8Publisher landing page
- PDF URL
-
https://e-jwj.org/upload/jwj-36-2-48.pdfDirect link to full text PDF
- Open access
-
YesWhether a free full text is available
- OA status
-
hybridOpen access status per OpenAlex
- OA URL
-
https://e-jwj.org/upload/jwj-36-2-48.pdfDirect OA link when available
- Concepts
-
Welding, Butt joint, Distortion (music), Finite element method, Materials science, Butt welding, Reinforcement, Shrinkage, Structural engineering, Composite material, Engineering, Metallurgy, Amplifier, Optoelectronics, CMOSTop concepts (fields/topics) attached by OpenAlex
- Cited by
-
4Total citation count in OpenAlex
- Citations by year (recent)
-
2024: 1, 2021: 1, 2020: 2Per-year citation counts (last 5 years)
- References (count)
-
26Number of works referenced by this work
- Related works (count)
-
10Other works algorithmically related by OpenAlex
Full payload
| id | https://openalex.org/W2794914389 |
|---|---|
| doi | https://doi.org/10.5781/jwj.2018.36.2.8 |
| ids.doi | https://doi.org/10.5781/jwj.2018.36.2.8 |
| ids.mag | 2794914389 |
| ids.openalex | https://openalex.org/W2794914389 |
| fwci | 0.53197362 |
| type | article |
| title | Experimental and Numerical Study on Effect of Weld Reinforcement on Angular Distortion of SAW Square Butt Welded Plates |
| biblio.issue | 2 |
| biblio.volume | 36 |
| biblio.last_page | 59 |
| biblio.first_page | 48 |
| topics[0].id | https://openalex.org/T10723 |
| topics[0].field.id | https://openalex.org/fields/22 |
| topics[0].field.display_name | Engineering |
| topics[0].score | 0.9998999834060669 |
| topics[0].domain.id | https://openalex.org/domains/3 |
| topics[0].domain.display_name | Physical Sciences |
| topics[0].subfield.id | https://openalex.org/subfields/2210 |
| topics[0].subfield.display_name | Mechanical Engineering |
| topics[0].display_name | Advanced Welding Techniques Analysis |
| topics[1].id | https://openalex.org/T10834 |
| topics[1].field.id | https://openalex.org/fields/22 |
| topics[1].field.display_name | Engineering |
| topics[1].score | 0.9998999834060669 |
| topics[1].domain.id | https://openalex.org/domains/3 |
| topics[1].domain.display_name | Physical Sciences |
| topics[1].subfield.id | https://openalex.org/subfields/2210 |
| topics[1].subfield.display_name | Mechanical Engineering |
| topics[1].display_name | Welding Techniques and Residual Stresses |
| topics[2].id | https://openalex.org/T10396 |
| topics[2].field.id | https://openalex.org/fields/22 |
| topics[2].field.display_name | Engineering |
| topics[2].score | 0.9980000257492065 |
| topics[2].domain.id | https://openalex.org/domains/3 |
| topics[2].domain.display_name | Physical Sciences |
| topics[2].subfield.id | https://openalex.org/subfields/2211 |
| topics[2].subfield.display_name | Mechanics of Materials |
| topics[2].display_name | Fatigue and fracture mechanics |
| is_xpac | False |
| apc_list | |
| apc_paid | |
| concepts[0].id | https://openalex.org/C19474535 |
| concepts[0].level | 2 |
| concepts[0].score | 0.8290707468986511 |
| concepts[0].wikidata | https://www.wikidata.org/wiki/Q131172 |
| concepts[0].display_name | Welding |
| concepts[1].id | https://openalex.org/C94870803 |
| concepts[1].level | 2 |
| concepts[1].score | 0.7200890183448792 |
| concepts[1].wikidata | https://www.wikidata.org/wiki/Q5002767 |
| concepts[1].display_name | Butt joint |
| concepts[2].id | https://openalex.org/C126780896 |
| concepts[2].level | 4 |
| concepts[2].score | 0.6855531930923462 |
| concepts[2].wikidata | https://www.wikidata.org/wiki/Q899871 |
| concepts[2].display_name | Distortion (music) |
| concepts[3].id | https://openalex.org/C135628077 |
| concepts[3].level | 2 |
| concepts[3].score | 0.6545409560203552 |
| concepts[3].wikidata | https://www.wikidata.org/wiki/Q220184 |
| concepts[3].display_name | Finite element method |
| concepts[4].id | https://openalex.org/C192562407 |
| concepts[4].level | 0 |
| concepts[4].score | 0.628848671913147 |
| concepts[4].wikidata | https://www.wikidata.org/wiki/Q228736 |
| concepts[4].display_name | Materials science |
| concepts[5].id | https://openalex.org/C111038815 |
| concepts[5].level | 3 |
| concepts[5].score | 0.5405437350273132 |
| concepts[5].wikidata | https://www.wikidata.org/wiki/Q613527 |
| concepts[5].display_name | Butt welding |
| concepts[6].id | https://openalex.org/C67203356 |
| concepts[6].level | 2 |
| concepts[6].score | 0.5222393274307251 |
| concepts[6].wikidata | https://www.wikidata.org/wiki/Q1321905 |
| concepts[6].display_name | Reinforcement |
| concepts[7].id | https://openalex.org/C180145272 |
| concepts[7].level | 2 |
| concepts[7].score | 0.44609054923057556 |
| concepts[7].wikidata | https://www.wikidata.org/wiki/Q7504144 |
| concepts[7].display_name | Shrinkage |
| concepts[8].id | https://openalex.org/C66938386 |
| concepts[8].level | 1 |
| concepts[8].score | 0.39246007800102234 |
| concepts[8].wikidata | https://www.wikidata.org/wiki/Q633538 |
| concepts[8].display_name | Structural engineering |
| concepts[9].id | https://openalex.org/C159985019 |
| concepts[9].level | 1 |
| concepts[9].score | 0.3701469302177429 |
| concepts[9].wikidata | https://www.wikidata.org/wiki/Q181790 |
| concepts[9].display_name | Composite material |
| concepts[10].id | https://openalex.org/C127413603 |
| concepts[10].level | 0 |
| concepts[10].score | 0.20202746987342834 |
| concepts[10].wikidata | https://www.wikidata.org/wiki/Q11023 |
| concepts[10].display_name | Engineering |
| concepts[11].id | https://openalex.org/C191897082 |
| concepts[11].level | 1 |
| concepts[11].score | 0.1366606056690216 |
| concepts[11].wikidata | https://www.wikidata.org/wiki/Q11467 |
| concepts[11].display_name | Metallurgy |
| concepts[12].id | https://openalex.org/C194257627 |
| concepts[12].level | 3 |
| concepts[12].score | 0.0 |
| concepts[12].wikidata | https://www.wikidata.org/wiki/Q211554 |
| concepts[12].display_name | Amplifier |
| concepts[13].id | https://openalex.org/C49040817 |
| concepts[13].level | 1 |
| concepts[13].score | 0.0 |
| concepts[13].wikidata | https://www.wikidata.org/wiki/Q193091 |
| concepts[13].display_name | Optoelectronics |
| concepts[14].id | https://openalex.org/C46362747 |
| concepts[14].level | 2 |
| concepts[14].score | 0.0 |
| concepts[14].wikidata | https://www.wikidata.org/wiki/Q173431 |
| concepts[14].display_name | CMOS |
| keywords[0].id | https://openalex.org/keywords/welding |
| keywords[0].score | 0.8290707468986511 |
| keywords[0].display_name | Welding |
| keywords[1].id | https://openalex.org/keywords/butt-joint |
| keywords[1].score | 0.7200890183448792 |
| keywords[1].display_name | Butt joint |
| keywords[2].id | https://openalex.org/keywords/distortion |
| keywords[2].score | 0.6855531930923462 |
| keywords[2].display_name | Distortion (music) |
| keywords[3].id | https://openalex.org/keywords/finite-element-method |
| keywords[3].score | 0.6545409560203552 |
| keywords[3].display_name | Finite element method |
| keywords[4].id | https://openalex.org/keywords/materials-science |
| keywords[4].score | 0.628848671913147 |
| keywords[4].display_name | Materials science |
| keywords[5].id | https://openalex.org/keywords/butt-welding |
| keywords[5].score | 0.5405437350273132 |
| keywords[5].display_name | Butt welding |
| keywords[6].id | https://openalex.org/keywords/reinforcement |
| keywords[6].score | 0.5222393274307251 |
| keywords[6].display_name | Reinforcement |
| keywords[7].id | https://openalex.org/keywords/shrinkage |
| keywords[7].score | 0.44609054923057556 |
| keywords[7].display_name | Shrinkage |
| keywords[8].id | https://openalex.org/keywords/structural-engineering |
| keywords[8].score | 0.39246007800102234 |
| keywords[8].display_name | Structural engineering |
| keywords[9].id | https://openalex.org/keywords/composite-material |
| keywords[9].score | 0.3701469302177429 |
| keywords[9].display_name | Composite material |
| keywords[10].id | https://openalex.org/keywords/engineering |
| keywords[10].score | 0.20202746987342834 |
| keywords[10].display_name | Engineering |
| keywords[11].id | https://openalex.org/keywords/metallurgy |
| keywords[11].score | 0.1366606056690216 |
| keywords[11].display_name | Metallurgy |
| language | en |
| locations[0].id | doi:10.5781/jwj.2018.36.2.8 |
| locations[0].is_oa | True |
| locations[0].source.id | https://openalex.org/S4210223004 |
| locations[0].source.issn | 2466-2100, 2466-2232 |
| locations[0].source.type | journal |
| locations[0].source.is_oa | False |
| locations[0].source.issn_l | 2466-2100 |
| locations[0].source.is_core | False |
| locations[0].source.is_in_doaj | False |
| locations[0].source.display_name | Journal of Welding and Joining |
| locations[0].source.host_organization | |
| locations[0].source.host_organization_name | |
| locations[0].license | cc-by-nc |
| locations[0].pdf_url | http://e-jwj.org/upload/jwj-36-2-48.pdf |
| locations[0].version | publishedVersion |
| locations[0].raw_type | journal-article |
| locations[0].license_id | https://openalex.org/licenses/cc-by-nc |
| locations[0].is_accepted | True |
| locations[0].is_published | True |
| locations[0].raw_source_name | Journal of Welding and Joining |
| locations[0].landing_page_url | https://doi.org/10.5781/jwj.2018.36.2.8 |
| indexed_in | crossref |
| authorships[0].author.id | https://openalex.org/A5006451181 |
| authorships[0].author.orcid | https://orcid.org/0000-0002-1274-8003 |
| authorships[0].author.display_name | Harendra Kumar Narang |
| authorships[0].countries | IN |
| authorships[0].affiliations[0].institution_ids | https://openalex.org/I38335241 |
| authorships[0].affiliations[0].raw_affiliation_string | Mechanical Engineering Department, National Institute of Technology, Raipur, 492010, India |
| authorships[0].institutions[0].id | https://openalex.org/I38335241 |
| authorships[0].institutions[0].ror | https://ror.org/02y553197 |
| authorships[0].institutions[0].type | education |
| authorships[0].institutions[0].lineage | https://openalex.org/I38335241 |
| authorships[0].institutions[0].country_code | IN |
| authorships[0].institutions[0].display_name | National Institute of Technology Raipur |
| authorships[0].author_position | first |
| authorships[0].raw_author_name | H. K. Narang |
| authorships[0].is_corresponding | False |
| authorships[0].raw_affiliation_strings | Mechanical Engineering Department, National Institute of Technology, Raipur, 492010, India |
| authorships[1].author.id | https://openalex.org/A5073236464 |
| authorships[1].author.orcid | https://orcid.org/0000-0002-1877-8211 |
| authorships[1].author.display_name | Manas Mohan Mahapatra |
| authorships[1].countries | IN |
| authorships[1].affiliations[0].institution_ids | https://openalex.org/I99729588 |
| authorships[1].affiliations[0].raw_affiliation_string | School of Mechanical Sciences, Indian Institute of Technology, Bhubaneswar, 751013, India |
| authorships[1].institutions[0].id | https://openalex.org/I99729588 |
| authorships[1].institutions[0].ror | https://ror.org/04gx72j20 |
| authorships[1].institutions[0].type | education |
| authorships[1].institutions[0].lineage | https://openalex.org/I99729588 |
| authorships[1].institutions[0].country_code | IN |
| authorships[1].institutions[0].display_name | Indian Institute of Technology Bhubaneswar |
| authorships[1].author_position | middle |
| authorships[1].raw_author_name | M. M. Mahapatra |
| authorships[1].is_corresponding | False |
| authorships[1].raw_affiliation_strings | School of Mechanical Sciences, Indian Institute of Technology, Bhubaneswar, 751013, India |
| authorships[2].author.id | https://openalex.org/A5045636935 |
| authorships[2].author.orcid | https://orcid.org/0000-0003-2289-1513 |
| authorships[2].author.display_name | Pradeep Kumar Jha |
| authorships[2].countries | IN |
| authorships[2].affiliations[0].institution_ids | https://openalex.org/I154851008 |
| authorships[2].affiliations[0].raw_affiliation_string | Mechanical and Industrial Engineering Department, Indian Institute of Technology, Roorkee, 247667, India |
| authorships[2].institutions[0].id | https://openalex.org/I154851008 |
| authorships[2].institutions[0].ror | https://ror.org/00582g326 |
| authorships[2].institutions[0].type | education |
| authorships[2].institutions[0].lineage | https://openalex.org/I154851008 |
| authorships[2].institutions[0].country_code | IN |
| authorships[2].institutions[0].display_name | Indian Institute of Technology Roorkee |
| authorships[2].author_position | middle |
| authorships[2].raw_author_name | P. K. Jha |
| authorships[2].is_corresponding | False |
| authorships[2].raw_affiliation_strings | Mechanical and Industrial Engineering Department, Indian Institute of Technology, Roorkee, 247667, India |
| authorships[3].author.id | https://openalex.org/A5005358318 |
| authorships[3].author.orcid | |
| authorships[3].author.display_name | P. V. S. S. Sridhar |
| authorships[3].countries | IN |
| authorships[3].affiliations[0].institution_ids | https://openalex.org/I1317621060 |
| authorships[3].affiliations[0].raw_affiliation_string | Mechanical Engineering Department, Indian Institute of Technology, Guwahati, 781039, India |
| authorships[3].institutions[0].id | https://openalex.org/I1317621060 |
| authorships[3].institutions[0].ror | https://ror.org/0022nd079 |
| authorships[3].institutions[0].type | education |
| authorships[3].institutions[0].lineage | https://openalex.org/I1317621060 |
| authorships[3].institutions[0].country_code | IN |
| authorships[3].institutions[0].display_name | Indian Institute of Technology Guwahati |
| authorships[3].author_position | middle |
| authorships[3].raw_author_name | PVSS Sridhar |
| authorships[3].is_corresponding | False |
| authorships[3].raw_affiliation_strings | Mechanical Engineering Department, Indian Institute of Technology, Guwahati, 781039, India |
| authorships[4].author.id | https://openalex.org/A5050140223 |
| authorships[4].author.orcid | https://orcid.org/0000-0001-7069-0308 |
| authorships[4].author.display_name | Pankaj Biswas |
| authorships[4].countries | IN |
| authorships[4].affiliations[0].institution_ids | https://openalex.org/I1317621060 |
| authorships[4].affiliations[0].raw_affiliation_string | Mechanical Engineering Department, Indian Institute of Technology, Guwahati, 781039, India |
| authorships[4].institutions[0].id | https://openalex.org/I1317621060 |
| authorships[4].institutions[0].ror | https://ror.org/0022nd079 |
| authorships[4].institutions[0].type | education |
| authorships[4].institutions[0].lineage | https://openalex.org/I1317621060 |
| authorships[4].institutions[0].country_code | IN |
| authorships[4].institutions[0].display_name | Indian Institute of Technology Guwahati |
| authorships[4].author_position | last |
| authorships[4].raw_author_name | P. Biswas |
| authorships[4].is_corresponding | False |
| authorships[4].raw_affiliation_strings | Mechanical Engineering Department, Indian Institute of Technology, Guwahati, 781039, India |
| has_content.pdf | True |
| has_content.grobid_xml | True |
| is_paratext | False |
| open_access.is_oa | True |
| open_access.oa_url | http://e-jwj.org/upload/jwj-36-2-48.pdf |
| open_access.oa_status | hybrid |
| open_access.any_repository_has_fulltext | False |
| created_date | 2025-10-10T00:00:00 |
| display_name | Experimental and Numerical Study on Effect of Weld Reinforcement on Angular Distortion of SAW Square Butt Welded Plates |
| has_fulltext | True |
| is_retracted | False |
| updated_date | 2025-11-06T03:46:38.306776 |
| primary_topic.id | https://openalex.org/T10723 |
| primary_topic.field.id | https://openalex.org/fields/22 |
| primary_topic.field.display_name | Engineering |
| primary_topic.score | 0.9998999834060669 |
| primary_topic.domain.id | https://openalex.org/domains/3 |
| primary_topic.domain.display_name | Physical Sciences |
| primary_topic.subfield.id | https://openalex.org/subfields/2210 |
| primary_topic.subfield.display_name | Mechanical Engineering |
| primary_topic.display_name | Advanced Welding Techniques Analysis |
| related_works | https://openalex.org/W2066993921, https://openalex.org/W67990321, https://openalex.org/W2569085265, https://openalex.org/W2013200465, https://openalex.org/W4361285323, https://openalex.org/W2353641529, https://openalex.org/W1901301945, https://openalex.org/W2375472738, https://openalex.org/W1537660051, https://openalex.org/W2359169655 |
| cited_by_count | 4 |
| counts_by_year[0].year | 2024 |
| counts_by_year[0].cited_by_count | 1 |
| counts_by_year[1].year | 2021 |
| counts_by_year[1].cited_by_count | 1 |
| counts_by_year[2].year | 2020 |
| counts_by_year[2].cited_by_count | 2 |
| locations_count | 1 |
| best_oa_location.id | doi:10.5781/jwj.2018.36.2.8 |
| best_oa_location.is_oa | True |
| best_oa_location.source.id | https://openalex.org/S4210223004 |
| best_oa_location.source.issn | 2466-2100, 2466-2232 |
| best_oa_location.source.type | journal |
| best_oa_location.source.is_oa | False |
| best_oa_location.source.issn_l | 2466-2100 |
| best_oa_location.source.is_core | False |
| best_oa_location.source.is_in_doaj | False |
| best_oa_location.source.display_name | Journal of Welding and Joining |
| best_oa_location.source.host_organization | |
| best_oa_location.source.host_organization_name | |
| best_oa_location.license | cc-by-nc |
| best_oa_location.pdf_url | http://e-jwj.org/upload/jwj-36-2-48.pdf |
| best_oa_location.version | publishedVersion |
| best_oa_location.raw_type | journal-article |
| best_oa_location.license_id | https://openalex.org/licenses/cc-by-nc |
| best_oa_location.is_accepted | True |
| best_oa_location.is_published | True |
| best_oa_location.raw_source_name | Journal of Welding and Joining |
| best_oa_location.landing_page_url | https://doi.org/10.5781/jwj.2018.36.2.8 |
| primary_location.id | doi:10.5781/jwj.2018.36.2.8 |
| primary_location.is_oa | True |
| primary_location.source.id | https://openalex.org/S4210223004 |
| primary_location.source.issn | 2466-2100, 2466-2232 |
| primary_location.source.type | journal |
| primary_location.source.is_oa | False |
| primary_location.source.issn_l | 2466-2100 |
| primary_location.source.is_core | False |
| primary_location.source.is_in_doaj | False |
| primary_location.source.display_name | Journal of Welding and Joining |
| primary_location.source.host_organization | |
| primary_location.source.host_organization_name | |
| primary_location.license | cc-by-nc |
| primary_location.pdf_url | http://e-jwj.org/upload/jwj-36-2-48.pdf |
| primary_location.version | publishedVersion |
| primary_location.raw_type | journal-article |
| primary_location.license_id | https://openalex.org/licenses/cc-by-nc |
| primary_location.is_accepted | True |
| primary_location.is_published | True |
| primary_location.raw_source_name | Journal of Welding and Joining |
| primary_location.landing_page_url | https://doi.org/10.5781/jwj.2018.36.2.8 |
| publication_date | 2018-04-02 |
| publication_year | 2018 |
| referenced_works | https://openalex.org/W2090057648, https://openalex.org/W2491919498, https://openalex.org/W2039544797, https://openalex.org/W1992482425, https://openalex.org/W2007045105, https://openalex.org/W1673229902, https://openalex.org/W1996269296, https://openalex.org/W2071685742, https://openalex.org/W1990784912, https://openalex.org/W1994251478, https://openalex.org/W1971529970, https://openalex.org/W2109294706, https://openalex.org/W2053216519, https://openalex.org/W2077716565, https://openalex.org/W2032339086, https://openalex.org/W2025298834, https://openalex.org/W2077116923, https://openalex.org/W2052555987, https://openalex.org/W1981378622, https://openalex.org/W1990307618, https://openalex.org/W2083805774, https://openalex.org/W2072288287, https://openalex.org/W2092297463, https://openalex.org/W1970046783, https://openalex.org/W2258410970, https://openalex.org/W92896534 |
| referenced_works_count | 26 |
| abstract_inverted_index.a | 111 |
| abstract_inverted_index.In | 53 |
| abstract_inverted_index.It | 20 |
| abstract_inverted_index.be | 48, 70, 76, 115 |
| abstract_inverted_index.by | 60 |
| abstract_inverted_index.in | 5, 12, 16, 78, 148, 159 |
| abstract_inverted_index.is | 21 |
| abstract_inverted_index.it | 56 |
| abstract_inverted_index.of | 9, 35, 43, 95, 105, 121 |
| abstract_inverted_index.on | 28, 141 |
| abstract_inverted_index.to | 23 |
| abstract_inverted_index.3-D | 129 |
| abstract_inverted_index.Key | 188 |
| abstract_inverted_index.The | 172 |
| abstract_inverted_index.and | 32, 65, 72, 109, 143, 152, 168, 177 |
| abstract_inverted_index.arc | 17, 84 |
| abstract_inverted_index.bed | 113 |
| abstract_inverted_index.can | 69, 75, 114 |
| abstract_inverted_index.for | 117, 163 |
| abstract_inverted_index.has | 57 |
| abstract_inverted_index.not | 102 |
| abstract_inverted_index.out | 127 |
| abstract_inverted_index.the | 13, 30, 45, 50, 90, 118, 122, 160, 165, 184 |
| abstract_inverted_index.top | 31, 64, 142 |
| abstract_inverted_index.use | 104 |
| abstract_inverted_index.was | 124 |
| abstract_inverted_index.(FE) | 133 |
| abstract_inverted_index.Such | 99 |
| abstract_inverted_index.Weld | 0 |
| abstract_inverted_index.also | 125 |
| abstract_inverted_index.been | 58 |
| abstract_inverted_index.both | 29, 44, 89 |
| abstract_inverted_index.butt | 36, 80 |
| abstract_inverted_index.does | 101 |
| abstract_inverted_index.done | 87 |
| abstract_inverted_index.each | 149 |
| abstract_inverted_index.flux | 112 |
| abstract_inverted_index.from | 88 |
| abstract_inverted_index.have | 24 |
| abstract_inverted_index.heat | 137, 192 |
| abstract_inverted_index.pass | 151 |
| abstract_inverted_index.play | 2 |
| abstract_inverted_index.role | 4 |
| abstract_inverted_index.such | 38 |
| abstract_inverted_index.that | 39, 62 |
| abstract_inverted_index.this | 54 |
| abstract_inverted_index.used | 116, 158 |
| abstract_inverted_index.weld | 26, 67, 139, 146 |
| abstract_inverted_index.were | 157 |
| abstract_inverted_index.with | 92, 183 |
| abstract_inverted_index.zone | 15 |
| abstract_inverted_index.(SAW) | 86 |
| abstract_inverted_index.close | 181 |
| abstract_inverted_index.force | 41 |
| abstract_inverted_index.joint | 37 |
| abstract_inverted_index.side, | 145 |
| abstract_inverted_index.sides | 34, 91 |
| abstract_inverted_index.strip | 108 |
| abstract_inverted_index.using | 128 |
| abstract_inverted_index.vital | 3 |
| abstract_inverted_index.would | 47 |
| abstract_inverted_index.Finite | 194 |
| abstract_inverted_index.Moving | 135, 191 |
| abstract_inverted_index.bottom | 33, 66, 144 |
| abstract_inverted_index.costly | 106 |
| abstract_inverted_index.finite | 131 |
| abstract_inverted_index.joints | 81 |
| abstract_inverted_index.square | 79 |
| abstract_inverted_index.study, | 55 |
| abstract_inverted_index.welded | 18 |
| abstract_inverted_index.words: | 189 |
| abstract_inverted_index.Thermal | 196 |
| abstract_inverted_index.angular | 51, 73, 169 |
| abstract_inverted_index.backing | 107 |
| abstract_inverted_index.carried | 126 |
| abstract_inverted_index.control | 94 |
| abstract_inverted_index.effects | 42 |
| abstract_inverted_index.element | 132 |
| abstract_inverted_index.instead | 110 |
| abstract_inverted_index.joints. | 19 |
| abstract_inverted_index.process | 97, 100, 123 |
| abstract_inverted_index.require | 103 |
| abstract_inverted_index.source, | 138, 193 |
| abstract_inverted_index.strains | 11 |
| abstract_inverted_index.through | 82 |
| abstract_inverted_index.welding | 85, 96, 150 |
| abstract_inverted_index.Modeling | 120 |
| abstract_inverted_index.accurate | 93 |
| abstract_inverted_index.achieved | 71 |
| abstract_inverted_index.adequate | 25 |
| abstract_inverted_index.analysis | 162 |
| abstract_inverted_index.element, | 195 |
| abstract_inverted_index.inherent | 10 |
| abstract_inverted_index.observed | 186 |
| abstract_inverted_index.patterns | 171, 179 |
| abstract_inverted_index.profiles | 167 |
| abstract_inverted_index.purpose. | 119 |
| abstract_inverted_index.results. | 187 |
| abstract_inverted_index.agreement | 182 |
| abstract_inverted_index.analysis, | 197, 200 |
| abstract_inverted_index.analysis. | 134 |
| abstract_inverted_index.dependent | 154 |
| abstract_inverted_index.desirable | 22 |
| abstract_inverted_index.different | 7 |
| abstract_inverted_index.formation | 8 |
| abstract_inverted_index.indicated | 180 |
| abstract_inverted_index.predicted | 174 |
| abstract_inverted_index.shrinkage | 40 |
| abstract_inverted_index.submerged | 83 |
| abstract_inverted_index.Distortion | 201 |
| abstract_inverted_index.Nonlinear, | 198 |
| abstract_inverted_index.acceptable | 63 |
| abstract_inverted_index.cancelling | 49 |
| abstract_inverted_index.controlled | 77 |
| abstract_inverted_index.deposition | 147 |
| abstract_inverted_index.distortion | 74, 170, 178 |
| abstract_inverted_index.predicting | 164 |
| abstract_inverted_index.properties | 156 |
| abstract_inverted_index.controlling | 6 |
| abstract_inverted_index.distortion. | 52 |
| abstract_inverted_index.distributed | 136 |
| abstract_inverted_index.established | 59 |
| abstract_inverted_index.experiments | 61 |
| abstract_inverted_index.numerically | 173 |
| abstract_inverted_index.parameters. | 98 |
| abstract_inverted_index.temperature | 153, 166, 175 |
| abstract_inverted_index.distribution | 176 |
| abstract_inverted_index.heat-affected | 14 |
| abstract_inverted_index.Elasto-plastic | 199 |
| abstract_inverted_index.Reinforcement, | 190 |
| abstract_inverted_index.experimentally | 185 |
| abstract_inverted_index.reinforcements | 1, 27, 46, 68, 140 |
| abstract_inverted_index.thermomechanical | 130, 161 |
| abstract_inverted_index.thermos-physical | 155 |
| cited_by_percentile_year.max | 96 |
| cited_by_percentile_year.min | 89 |
| countries_distinct_count | 1 |
| institutions_distinct_count | 5 |
| citation_normalized_percentile.value | 0.62485295 |
| citation_normalized_percentile.is_in_top_1_percent | False |
| citation_normalized_percentile.is_in_top_10_percent | False |