Investigation on the microstructure and tensile behavior of a Ni-based IN792 superalloy Article Swipe
Beining Du
,
Liyuan Sheng
,
Ziyang Hu
,
Chuanyong Cui
,
Jinxia Yang
,
Xiaofeng Sun
·
YOU?
·
· 2018
· Open Access
·
· DOI: https://doi.org/10.1177/1687814017752167
YOU?
·
· 2018
· Open Access
·
· DOI: https://doi.org/10.1177/1687814017752167
The Ni-based IN792 superalloy is widely used in aeroengine components because of its low manufacturing cost and good mid-temperature (600°C–900°C) properties. However, its mechanical properties exhibit fluctuation with temperature, so a comprehensive understanding on the tensile behavior of IN792 superalloy at different temperatures is necessary. In this article, IN792 superalloy was fabricated and heat treated with the standard heat treatment of 1120°C/2 h air cooling + 1080°C/4 h air cooling + 845°C/24 h air cooling, and its tensile behavior at 550°C, 600°C, 650°C, 700°C, 760°C, 850°C, and 900°C was investigated. The results showed that IN792 superalloy exhibited obvious anomalous yield and intermediate temperature brittleness behaviors. The yield strength and ultimate strength of IN792 superalloy changed little below 760°C, but decreased significantly as the temperature increases to above 760°C. The ductility of IN792 superalloy had a little increase between 550°C and 600°C and then decreased significantly at 650°C and 700°C. As the tensile temperature increases from 700°C to 850°C, the ductility of IN792 superalloy increased again. However, when the temperature continues to rise to 900°C, the ductility dropped greatly. Such a tensile behavior of IN792 superalloy should be ascribed to the microstructure, such as the MC carbide, γ/γ′ eutectic structure, and γ′ phase.
Related Topics
Concepts
Metadata
- Type
- article
- Language
- en
- Landing Page
- https://doi.org/10.1177/1687814017752167
- https://journals.sagepub.com/doi/pdf/10.1177/1687814017752167
- OA Status
- gold
- Cited By
- 26
- References
- 33
- Related Works
- 10
- OpenAlex ID
- https://openalex.org/W2788888682
All OpenAlex metadata
Raw OpenAlex JSON
- OpenAlex ID
-
https://openalex.org/W2788888682Canonical identifier for this work in OpenAlex
- DOI
-
https://doi.org/10.1177/1687814017752167Digital Object Identifier
- Title
-
Investigation on the microstructure and tensile behavior of a Ni-based IN792 superalloyWork title
- Type
-
articleOpenAlex work type
- Language
-
enPrimary language
- Publication year
-
2018Year of publication
- Publication date
-
2018-02-01Full publication date if available
- Authors
-
Beining Du, Liyuan Sheng, Ziyang Hu, Chuanyong Cui, Jinxia Yang, Xiaofeng SunList of authors in order
- Landing page
-
https://doi.org/10.1177/1687814017752167Publisher landing page
- PDF URL
-
https://journals.sagepub.com/doi/pdf/10.1177/1687814017752167Direct link to full text PDF
- Open access
-
YesWhether a free full text is available
- OA status
-
goldOpen access status per OpenAlex
- OA URL
-
https://journals.sagepub.com/doi/pdf/10.1177/1687814017752167Direct OA link when available
- Concepts
-
Superalloy, Materials science, Ultimate tensile strength, Eutectic system, Microstructure, Ductility (Earth science), Metallurgy, Carbide, Brittleness, Composite material, CreepTop concepts (fields/topics) attached by OpenAlex
- Cited by
-
26Total citation count in OpenAlex
- Citations by year (recent)
-
2025: 6, 2024: 3, 2023: 4, 2022: 1, 2021: 4Per-year citation counts (last 5 years)
- References (count)
-
33Number of works referenced by this work
- Related works (count)
-
10Other works algorithmically related by OpenAlex
Full payload
| id | https://openalex.org/W2788888682 |
|---|---|
| doi | https://doi.org/10.1177/1687814017752167 |
| ids.doi | https://doi.org/10.1177/1687814017752167 |
| ids.mag | 2788888682 |
| ids.openalex | https://openalex.org/W2788888682 |
| fwci | 2.12789447 |
| type | article |
| title | Investigation on the microstructure and tensile behavior of a Ni-based IN792 superalloy |
| biblio.issue | 2 |
| biblio.volume | 10 |
| biblio.last_page | |
| biblio.first_page | |
| topics[0].id | https://openalex.org/T10840 |
| topics[0].field.id | https://openalex.org/fields/22 |
| topics[0].field.display_name | Engineering |
| topics[0].score | 1.0 |
| topics[0].domain.id | https://openalex.org/domains/3 |
| topics[0].domain.display_name | Physical Sciences |
| topics[0].subfield.id | https://openalex.org/subfields/2210 |
| topics[0].subfield.display_name | Mechanical Engineering |
| topics[0].display_name | High Temperature Alloys and Creep |
| topics[1].id | https://openalex.org/T10670 |
| topics[1].field.id | https://openalex.org/fields/22 |
| topics[1].field.display_name | Engineering |
| topics[1].score | 0.9991000294685364 |
| topics[1].domain.id | https://openalex.org/domains/3 |
| topics[1].domain.display_name | Physical Sciences |
| topics[1].subfield.id | https://openalex.org/subfields/2202 |
| topics[1].subfield.display_name | Aerospace Engineering |
| topics[1].display_name | Aluminum Alloy Microstructure Properties |
| topics[2].id | https://openalex.org/T10386 |
| topics[2].field.id | https://openalex.org/fields/22 |
| topics[2].field.display_name | Engineering |
| topics[2].score | 0.9975000023841858 |
| topics[2].domain.id | https://openalex.org/domains/3 |
| topics[2].domain.display_name | Physical Sciences |
| topics[2].subfield.id | https://openalex.org/subfields/2210 |
| topics[2].subfield.display_name | Mechanical Engineering |
| topics[2].display_name | Microstructure and Mechanical Properties of Steels |
| is_xpac | False |
| apc_list.value | 2100 |
| apc_list.currency | USD |
| apc_list.value_usd | 2100 |
| apc_paid.value | 2100 |
| apc_paid.currency | USD |
| apc_paid.value_usd | 2100 |
| concepts[0].id | https://openalex.org/C207055975 |
| concepts[0].level | 3 |
| concepts[0].score | 0.9494585990905762 |
| concepts[0].wikidata | https://www.wikidata.org/wiki/Q637345 |
| concepts[0].display_name | Superalloy |
| concepts[1].id | https://openalex.org/C192562407 |
| concepts[1].level | 0 |
| concepts[1].score | 0.8792740106582642 |
| concepts[1].wikidata | https://www.wikidata.org/wiki/Q228736 |
| concepts[1].display_name | Materials science |
| concepts[2].id | https://openalex.org/C112950240 |
| concepts[2].level | 2 |
| concepts[2].score | 0.8160722255706787 |
| concepts[2].wikidata | https://www.wikidata.org/wiki/Q76005 |
| concepts[2].display_name | Ultimate tensile strength |
| concepts[3].id | https://openalex.org/C18168003 |
| concepts[3].level | 3 |
| concepts[3].score | 0.7523789405822754 |
| concepts[3].wikidata | https://www.wikidata.org/wiki/Q628595 |
| concepts[3].display_name | Eutectic system |
| concepts[4].id | https://openalex.org/C87976508 |
| concepts[4].level | 2 |
| concepts[4].score | 0.7369062304496765 |
| concepts[4].wikidata | https://www.wikidata.org/wiki/Q1498213 |
| concepts[4].display_name | Microstructure |
| concepts[5].id | https://openalex.org/C2776512210 |
| concepts[5].level | 3 |
| concepts[5].score | 0.699227511882782 |
| concepts[5].wikidata | https://www.wikidata.org/wiki/Q5311608 |
| concepts[5].display_name | Ductility (Earth science) |
| concepts[6].id | https://openalex.org/C191897082 |
| concepts[6].level | 1 |
| concepts[6].score | 0.6119629740715027 |
| concepts[6].wikidata | https://www.wikidata.org/wiki/Q11467 |
| concepts[6].display_name | Metallurgy |
| concepts[7].id | https://openalex.org/C5335593 |
| concepts[7].level | 2 |
| concepts[7].score | 0.6101785898208618 |
| concepts[7].wikidata | https://www.wikidata.org/wiki/Q241906 |
| concepts[7].display_name | Carbide |
| concepts[8].id | https://openalex.org/C136478896 |
| concepts[8].level | 2 |
| concepts[8].score | 0.49036478996276855 |
| concepts[8].wikidata | https://www.wikidata.org/wiki/Q898288 |
| concepts[8].display_name | Brittleness |
| concepts[9].id | https://openalex.org/C159985019 |
| concepts[9].level | 1 |
| concepts[9].score | 0.3364279270172119 |
| concepts[9].wikidata | https://www.wikidata.org/wiki/Q181790 |
| concepts[9].display_name | Composite material |
| concepts[10].id | https://openalex.org/C149912024 |
| concepts[10].level | 2 |
| concepts[10].score | 0.08086815476417542 |
| concepts[10].wikidata | https://www.wikidata.org/wiki/Q462188 |
| concepts[10].display_name | Creep |
| keywords[0].id | https://openalex.org/keywords/superalloy |
| keywords[0].score | 0.9494585990905762 |
| keywords[0].display_name | Superalloy |
| keywords[1].id | https://openalex.org/keywords/materials-science |
| keywords[1].score | 0.8792740106582642 |
| keywords[1].display_name | Materials science |
| keywords[2].id | https://openalex.org/keywords/ultimate-tensile-strength |
| keywords[2].score | 0.8160722255706787 |
| keywords[2].display_name | Ultimate tensile strength |
| keywords[3].id | https://openalex.org/keywords/eutectic-system |
| keywords[3].score | 0.7523789405822754 |
| keywords[3].display_name | Eutectic system |
| keywords[4].id | https://openalex.org/keywords/microstructure |
| keywords[4].score | 0.7369062304496765 |
| keywords[4].display_name | Microstructure |
| keywords[5].id | https://openalex.org/keywords/ductility |
| keywords[5].score | 0.699227511882782 |
| keywords[5].display_name | Ductility (Earth science) |
| keywords[6].id | https://openalex.org/keywords/metallurgy |
| keywords[6].score | 0.6119629740715027 |
| keywords[6].display_name | Metallurgy |
| keywords[7].id | https://openalex.org/keywords/carbide |
| keywords[7].score | 0.6101785898208618 |
| keywords[7].display_name | Carbide |
| keywords[8].id | https://openalex.org/keywords/brittleness |
| keywords[8].score | 0.49036478996276855 |
| keywords[8].display_name | Brittleness |
| keywords[9].id | https://openalex.org/keywords/composite-material |
| keywords[9].score | 0.3364279270172119 |
| keywords[9].display_name | Composite material |
| keywords[10].id | https://openalex.org/keywords/creep |
| keywords[10].score | 0.08086815476417542 |
| keywords[10].display_name | Creep |
| language | en |
| locations[0].id | doi:10.1177/1687814017752167 |
| locations[0].is_oa | True |
| locations[0].source.id | https://openalex.org/S185389193 |
| locations[0].source.issn | 1687-8132, 1687-8140 |
| locations[0].source.type | journal |
| locations[0].source.is_oa | True |
| locations[0].source.issn_l | 1687-8132 |
| locations[0].source.is_core | True |
| locations[0].source.is_in_doaj | True |
| locations[0].source.display_name | Advances in Mechanical Engineering |
| locations[0].source.host_organization | https://openalex.org/P4310320017 |
| locations[0].source.host_organization_name | SAGE Publishing |
| locations[0].source.host_organization_lineage | https://openalex.org/P4310320017 |
| locations[0].source.host_organization_lineage_names | SAGE Publishing |
| locations[0].license | cc-by |
| locations[0].pdf_url | https://journals.sagepub.com/doi/pdf/10.1177/1687814017752167 |
| locations[0].version | publishedVersion |
| locations[0].raw_type | journal-article |
| locations[0].license_id | https://openalex.org/licenses/cc-by |
| locations[0].is_accepted | True |
| locations[0].is_published | True |
| locations[0].raw_source_name | Advances in Mechanical Engineering |
| locations[0].landing_page_url | https://doi.org/10.1177/1687814017752167 |
| locations[1].id | pmh:oai:doaj.org/article:0425eee4fed742499383345471b2a5aa |
| locations[1].is_oa | True |
| locations[1].source.id | https://openalex.org/S4306401280 |
| locations[1].source.issn | |
| locations[1].source.type | repository |
| locations[1].source.is_oa | False |
| locations[1].source.issn_l | |
| locations[1].source.is_core | False |
| locations[1].source.is_in_doaj | False |
| locations[1].source.display_name | DOAJ (DOAJ: Directory of Open Access Journals) |
| locations[1].source.host_organization | |
| locations[1].source.host_organization_name | |
| locations[1].license | cc-by-sa |
| locations[1].pdf_url | |
| locations[1].version | submittedVersion |
| locations[1].raw_type | article |
| locations[1].license_id | https://openalex.org/licenses/cc-by-sa |
| locations[1].is_accepted | False |
| locations[1].is_published | False |
| locations[1].raw_source_name | Advances in Mechanical Engineering, Vol 10 (2018) |
| locations[1].landing_page_url | https://doaj.org/article/0425eee4fed742499383345471b2a5aa |
| indexed_in | crossref, doaj |
| authorships[0].author.id | https://openalex.org/A5103157707 |
| authorships[0].author.orcid | https://orcid.org/0000-0002-4824-857X |
| authorships[0].author.display_name | Beining Du |
| authorships[0].countries | CN |
| authorships[0].affiliations[0].institution_ids | https://openalex.org/I4210128628 |
| authorships[0].affiliations[0].raw_affiliation_string | Shenzhen Institute, Peking University, Shenzhen, China |
| authorships[0].institutions[0].id | https://openalex.org/I4210128628 |
| authorships[0].institutions[0].ror | https://ror.org/03kkjyb15 |
| authorships[0].institutions[0].type | healthcare |
| authorships[0].institutions[0].lineage | https://openalex.org/I4210128628 |
| authorships[0].institutions[0].country_code | CN |
| authorships[0].institutions[0].display_name | Peking University Shenzhen Hospital |
| authorships[0].author_position | first |
| authorships[0].raw_author_name | Beining Du |
| authorships[0].is_corresponding | False |
| authorships[0].raw_affiliation_strings | Shenzhen Institute, Peking University, Shenzhen, China |
| authorships[1].author.id | https://openalex.org/A5022261708 |
| authorships[1].author.orcid | https://orcid.org/0000-0001-7729-0315 |
| authorships[1].author.display_name | Liyuan Sheng |
| authorships[1].countries | CN |
| authorships[1].affiliations[0].institution_ids | https://openalex.org/I4210128628 |
| authorships[1].affiliations[0].raw_affiliation_string | Shenzhen Institute, Peking University, Shenzhen, China |
| authorships[1].institutions[0].id | https://openalex.org/I4210128628 |
| authorships[1].institutions[0].ror | https://ror.org/03kkjyb15 |
| authorships[1].institutions[0].type | healthcare |
| authorships[1].institutions[0].lineage | https://openalex.org/I4210128628 |
| authorships[1].institutions[0].country_code | CN |
| authorships[1].institutions[0].display_name | Peking University Shenzhen Hospital |
| authorships[1].author_position | middle |
| authorships[1].raw_author_name | Liyuan Sheng |
| authorships[1].is_corresponding | True |
| authorships[1].raw_affiliation_strings | Shenzhen Institute, Peking University, Shenzhen, China |
| authorships[2].author.id | https://openalex.org/A5101867447 |
| authorships[2].author.orcid | https://orcid.org/0009-0002-1354-8262 |
| authorships[2].author.display_name | Ziyang Hu |
| authorships[2].affiliations[0].raw_affiliation_string | Shenzhen Yezhan Electronics Co., Ltd., Shenzhen, China |
| authorships[2].author_position | middle |
| authorships[2].raw_author_name | Ziyang Hu |
| authorships[2].is_corresponding | False |
| authorships[2].raw_affiliation_strings | Shenzhen Yezhan Electronics Co., Ltd., Shenzhen, China |
| authorships[3].author.id | https://openalex.org/A5112122680 |
| authorships[3].author.orcid | |
| authorships[3].author.display_name | Chuanyong Cui |
| authorships[3].countries | CN |
| authorships[3].affiliations[0].institution_ids | https://openalex.org/I19820366 |
| authorships[3].affiliations[0].raw_affiliation_string | Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China |
| authorships[3].institutions[0].id | https://openalex.org/I19820366 |
| authorships[3].institutions[0].ror | https://ror.org/034t30j35 |
| authorships[3].institutions[0].type | government |
| authorships[3].institutions[0].lineage | https://openalex.org/I19820366 |
| authorships[3].institutions[0].country_code | CN |
| authorships[3].institutions[0].display_name | Chinese Academy of Sciences |
| authorships[3].author_position | middle |
| authorships[3].raw_author_name | Chuanyong Cui |
| authorships[3].is_corresponding | False |
| authorships[3].raw_affiliation_strings | Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China |
| authorships[4].author.id | https://openalex.org/A5103960934 |
| authorships[4].author.orcid | |
| authorships[4].author.display_name | Jinxia Yang |
| authorships[4].countries | CN |
| authorships[4].affiliations[0].institution_ids | https://openalex.org/I19820366 |
| authorships[4].affiliations[0].raw_affiliation_string | Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China |
| authorships[4].institutions[0].id | https://openalex.org/I19820366 |
| authorships[4].institutions[0].ror | https://ror.org/034t30j35 |
| authorships[4].institutions[0].type | government |
| authorships[4].institutions[0].lineage | https://openalex.org/I19820366 |
| authorships[4].institutions[0].country_code | CN |
| authorships[4].institutions[0].display_name | Chinese Academy of Sciences |
| authorships[4].author_position | middle |
| authorships[4].raw_author_name | Jinxia Yang |
| authorships[4].is_corresponding | False |
| authorships[4].raw_affiliation_strings | Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China |
| authorships[5].author.id | https://openalex.org/A5100515819 |
| authorships[5].author.orcid | https://orcid.org/0000-0001-7945-0896 |
| authorships[5].author.display_name | Xiaofeng Sun |
| authorships[5].countries | CN |
| authorships[5].affiliations[0].institution_ids | https://openalex.org/I19820366 |
| authorships[5].affiliations[0].raw_affiliation_string | Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China |
| authorships[5].institutions[0].id | https://openalex.org/I19820366 |
| authorships[5].institutions[0].ror | https://ror.org/034t30j35 |
| authorships[5].institutions[0].type | government |
| authorships[5].institutions[0].lineage | https://openalex.org/I19820366 |
| authorships[5].institutions[0].country_code | CN |
| authorships[5].institutions[0].display_name | Chinese Academy of Sciences |
| authorships[5].author_position | last |
| authorships[5].raw_author_name | Xiaofeng Sun |
| authorships[5].is_corresponding | False |
| authorships[5].raw_affiliation_strings | Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China |
| has_content.pdf | True |
| has_content.grobid_xml | True |
| is_paratext | False |
| open_access.is_oa | True |
| open_access.oa_url | https://journals.sagepub.com/doi/pdf/10.1177/1687814017752167 |
| open_access.oa_status | gold |
| open_access.any_repository_has_fulltext | False |
| created_date | 2025-10-10T00:00:00 |
| display_name | Investigation on the microstructure and tensile behavior of a Ni-based IN792 superalloy |
| has_fulltext | False |
| is_retracted | False |
| updated_date | 2025-11-06T03:46:38.306776 |
| primary_topic.id | https://openalex.org/T10840 |
| primary_topic.field.id | https://openalex.org/fields/22 |
| primary_topic.field.display_name | Engineering |
| primary_topic.score | 1.0 |
| primary_topic.domain.id | https://openalex.org/domains/3 |
| primary_topic.domain.display_name | Physical Sciences |
| primary_topic.subfield.id | https://openalex.org/subfields/2210 |
| primary_topic.subfield.display_name | Mechanical Engineering |
| primary_topic.display_name | High Temperature Alloys and Creep |
| related_works | https://openalex.org/W2082176622, https://openalex.org/W2092978857, https://openalex.org/W2351407729, https://openalex.org/W2351999527, https://openalex.org/W2383211075, https://openalex.org/W2355170162, https://openalex.org/W2785286313, https://openalex.org/W2102085340, https://openalex.org/W4292662907, https://openalex.org/W2913590860 |
| cited_by_count | 26 |
| counts_by_year[0].year | 2025 |
| counts_by_year[0].cited_by_count | 6 |
| counts_by_year[1].year | 2024 |
| counts_by_year[1].cited_by_count | 3 |
| counts_by_year[2].year | 2023 |
| counts_by_year[2].cited_by_count | 4 |
| counts_by_year[3].year | 2022 |
| counts_by_year[3].cited_by_count | 1 |
| counts_by_year[4].year | 2021 |
| counts_by_year[4].cited_by_count | 4 |
| counts_by_year[5].year | 2020 |
| counts_by_year[5].cited_by_count | 4 |
| counts_by_year[6].year | 2019 |
| counts_by_year[6].cited_by_count | 3 |
| counts_by_year[7].year | 2018 |
| counts_by_year[7].cited_by_count | 1 |
| locations_count | 2 |
| best_oa_location.id | doi:10.1177/1687814017752167 |
| best_oa_location.is_oa | True |
| best_oa_location.source.id | https://openalex.org/S185389193 |
| best_oa_location.source.issn | 1687-8132, 1687-8140 |
| best_oa_location.source.type | journal |
| best_oa_location.source.is_oa | True |
| best_oa_location.source.issn_l | 1687-8132 |
| best_oa_location.source.is_core | True |
| best_oa_location.source.is_in_doaj | True |
| best_oa_location.source.display_name | Advances in Mechanical Engineering |
| best_oa_location.source.host_organization | https://openalex.org/P4310320017 |
| best_oa_location.source.host_organization_name | SAGE Publishing |
| best_oa_location.source.host_organization_lineage | https://openalex.org/P4310320017 |
| best_oa_location.source.host_organization_lineage_names | SAGE Publishing |
| best_oa_location.license | cc-by |
| best_oa_location.pdf_url | https://journals.sagepub.com/doi/pdf/10.1177/1687814017752167 |
| best_oa_location.version | publishedVersion |
| best_oa_location.raw_type | journal-article |
| best_oa_location.license_id | https://openalex.org/licenses/cc-by |
| best_oa_location.is_accepted | True |
| best_oa_location.is_published | True |
| best_oa_location.raw_source_name | Advances in Mechanical Engineering |
| best_oa_location.landing_page_url | https://doi.org/10.1177/1687814017752167 |
| primary_location.id | doi:10.1177/1687814017752167 |
| primary_location.is_oa | True |
| primary_location.source.id | https://openalex.org/S185389193 |
| primary_location.source.issn | 1687-8132, 1687-8140 |
| primary_location.source.type | journal |
| primary_location.source.is_oa | True |
| primary_location.source.issn_l | 1687-8132 |
| primary_location.source.is_core | True |
| primary_location.source.is_in_doaj | True |
| primary_location.source.display_name | Advances in Mechanical Engineering |
| primary_location.source.host_organization | https://openalex.org/P4310320017 |
| primary_location.source.host_organization_name | SAGE Publishing |
| primary_location.source.host_organization_lineage | https://openalex.org/P4310320017 |
| primary_location.source.host_organization_lineage_names | SAGE Publishing |
| primary_location.license | cc-by |
| primary_location.pdf_url | https://journals.sagepub.com/doi/pdf/10.1177/1687814017752167 |
| primary_location.version | publishedVersion |
| primary_location.raw_type | journal-article |
| primary_location.license_id | https://openalex.org/licenses/cc-by |
| primary_location.is_accepted | True |
| primary_location.is_published | True |
| primary_location.raw_source_name | Advances in Mechanical Engineering |
| primary_location.landing_page_url | https://doi.org/10.1177/1687814017752167 |
| publication_date | 2018-02-01 |
| publication_year | 2018 |
| referenced_works | https://openalex.org/W2075631784, https://openalex.org/W2030146899, https://openalex.org/W2068258375, https://openalex.org/W2604980296, https://openalex.org/W2598325426, https://openalex.org/W2026756108, https://openalex.org/W1984420373, https://openalex.org/W2155831996, https://openalex.org/W2043372574, https://openalex.org/W1998247042, https://openalex.org/W2397003828, https://openalex.org/W2048074949, https://openalex.org/W1974739790, https://openalex.org/W1975068803, https://openalex.org/W2076421335, https://openalex.org/W2018828950, https://openalex.org/W2077022065, https://openalex.org/W1991141370, https://openalex.org/W2023834149, https://openalex.org/W2087994904, https://openalex.org/W2028970277, https://openalex.org/W1248417357, https://openalex.org/W2044296711, https://openalex.org/W2130885620, https://openalex.org/W2049509998, https://openalex.org/W2037899981, https://openalex.org/W2031151939, https://openalex.org/W1996488292, https://openalex.org/W1980214951, https://openalex.org/W2053110404, https://openalex.org/W2009325756, https://openalex.org/W1966440738, https://openalex.org/W1999012498 |
| referenced_works_count | 33 |
| abstract_inverted_index.+ | 65, 70 |
| abstract_inverted_index.a | 30, 134, 179 |
| abstract_inverted_index.h | 62, 67, 72 |
| abstract_inverted_index.As | 149 |
| abstract_inverted_index.In | 45 |
| abstract_inverted_index.MC | 194 |
| abstract_inverted_index.as | 121, 192 |
| abstract_inverted_index.at | 40, 79, 145 |
| abstract_inverted_index.be | 186 |
| abstract_inverted_index.in | 7 |
| abstract_inverted_index.is | 4, 43 |
| abstract_inverted_index.of | 11, 37, 60, 111, 130, 160, 182 |
| abstract_inverted_index.on | 33 |
| abstract_inverted_index.so | 29 |
| abstract_inverted_index.to | 125, 156, 170, 172, 188 |
| abstract_inverted_index.The | 0, 90, 105, 128 |
| abstract_inverted_index.air | 63, 68, 73 |
| abstract_inverted_index.and | 16, 52, 75, 86, 100, 108, 139, 141, 147, 199 |
| abstract_inverted_index.but | 118 |
| abstract_inverted_index.had | 133 |
| abstract_inverted_index.its | 12, 22, 76 |
| abstract_inverted_index.low | 13 |
| abstract_inverted_index.the | 34, 56, 122, 150, 158, 167, 174, 189, 193 |
| abstract_inverted_index.was | 50, 88 |
| abstract_inverted_index.Such | 178 |
| abstract_inverted_index.cost | 15 |
| abstract_inverted_index.from | 154 |
| abstract_inverted_index.good | 17 |
| abstract_inverted_index.heat | 53, 58 |
| abstract_inverted_index.rise | 171 |
| abstract_inverted_index.such | 191 |
| abstract_inverted_index.that | 93 |
| abstract_inverted_index.then | 142 |
| abstract_inverted_index.this | 46 |
| abstract_inverted_index.used | 6 |
| abstract_inverted_index.when | 166 |
| abstract_inverted_index.with | 27, 55 |
| abstract_inverted_index.IN792 | 2, 38, 48, 94, 112, 131, 161, 183 |
| abstract_inverted_index.above | 126 |
| abstract_inverted_index.below | 116 |
| abstract_inverted_index.yield | 99, 106 |
| abstract_inverted_index.γ′ | 200 |
| abstract_inverted_index.550°C | 138 |
| abstract_inverted_index.600°C | 140 |
| abstract_inverted_index.650°C | 146 |
| abstract_inverted_index.700°C | 155 |
| abstract_inverted_index.900°C | 87 |
| abstract_inverted_index.again. | 164 |
| abstract_inverted_index.little | 115, 135 |
| abstract_inverted_index.phase. | 201 |
| abstract_inverted_index.should | 185 |
| abstract_inverted_index.showed | 92 |
| abstract_inverted_index.widely | 5 |
| abstract_inverted_index.550°C, | 80 |
| abstract_inverted_index.600°C, | 81 |
| abstract_inverted_index.650°C, | 82 |
| abstract_inverted_index.700°C, | 83 |
| abstract_inverted_index.700°C. | 148 |
| abstract_inverted_index.760°C, | 84, 117 |
| abstract_inverted_index.760°C. | 127 |
| abstract_inverted_index.850°C, | 85, 157 |
| abstract_inverted_index.900°C, | 173 |
| abstract_inverted_index.because | 10 |
| abstract_inverted_index.between | 137 |
| abstract_inverted_index.changed | 114 |
| abstract_inverted_index.cooling | 64, 69 |
| abstract_inverted_index.dropped | 176 |
| abstract_inverted_index.exhibit | 25 |
| abstract_inverted_index.obvious | 97 |
| abstract_inverted_index.results | 91 |
| abstract_inverted_index.tensile | 35, 77, 151, 180 |
| abstract_inverted_index.treated | 54 |
| abstract_inverted_index.However, | 21, 165 |
| abstract_inverted_index.Ni-based | 1 |
| abstract_inverted_index.article, | 47 |
| abstract_inverted_index.ascribed | 187 |
| abstract_inverted_index.behavior | 36, 78, 181 |
| abstract_inverted_index.carbide, | 195 |
| abstract_inverted_index.cooling, | 74 |
| abstract_inverted_index.eutectic | 197 |
| abstract_inverted_index.greatly. | 177 |
| abstract_inverted_index.increase | 136 |
| abstract_inverted_index.standard | 57 |
| abstract_inverted_index.strength | 107, 110 |
| abstract_inverted_index.ultimate | 109 |
| abstract_inverted_index.γ/γ′ | 196 |
| abstract_inverted_index.1080°C/4 | 66 |
| abstract_inverted_index.1120°C/2 | 61 |
| abstract_inverted_index.845°C/24 | 71 |
| abstract_inverted_index.anomalous | 98 |
| abstract_inverted_index.continues | 169 |
| abstract_inverted_index.decreased | 119, 143 |
| abstract_inverted_index.different | 41 |
| abstract_inverted_index.ductility | 129, 159, 175 |
| abstract_inverted_index.exhibited | 96 |
| abstract_inverted_index.increased | 163 |
| abstract_inverted_index.increases | 124, 153 |
| abstract_inverted_index.treatment | 59 |
| abstract_inverted_index.aeroengine | 8 |
| abstract_inverted_index.behaviors. | 104 |
| abstract_inverted_index.components | 9 |
| abstract_inverted_index.fabricated | 51 |
| abstract_inverted_index.mechanical | 23 |
| abstract_inverted_index.necessary. | 44 |
| abstract_inverted_index.properties | 24 |
| abstract_inverted_index.structure, | 198 |
| abstract_inverted_index.superalloy | 3, 39, 49, 95, 113, 132, 162, 184 |
| abstract_inverted_index.brittleness | 103 |
| abstract_inverted_index.fluctuation | 26 |
| abstract_inverted_index.properties. | 20 |
| abstract_inverted_index.temperature | 102, 123, 152, 168 |
| abstract_inverted_index.intermediate | 101 |
| abstract_inverted_index.temperature, | 28 |
| abstract_inverted_index.temperatures | 42 |
| abstract_inverted_index.comprehensive | 31 |
| abstract_inverted_index.investigated. | 89 |
| abstract_inverted_index.manufacturing | 14 |
| abstract_inverted_index.significantly | 120, 144 |
| abstract_inverted_index.understanding | 32 |
| abstract_inverted_index.microstructure, | 190 |
| abstract_inverted_index.mid-temperature | 18 |
| abstract_inverted_index.(600°C–900°C) | 19 |
| cited_by_percentile_year.max | 99 |
| cited_by_percentile_year.min | 89 |
| corresponding_author_ids | https://openalex.org/A5022261708 |
| countries_distinct_count | 1 |
| institutions_distinct_count | 6 |
| corresponding_institution_ids | https://openalex.org/I4210128628 |
| citation_normalized_percentile.value | 0.8469873 |
| citation_normalized_percentile.is_in_top_1_percent | False |
| citation_normalized_percentile.is_in_top_10_percent | False |