Mechanical Behaviour of Small Load Bearing Structures Fabricated by 3D Printing Article Swipe
Nikola Palić
,
Vukašin Slavković
,
Živana Jovanović Pešić
,
Fatima Živić
,
Nenad Grujović
·
YOU?
·
· 2019
· Open Access
·
· DOI: https://doi.org/10.18485/aeletters.2019.4.3.2
YOU?
·
· 2019
· Open Access
·
· DOI: https://doi.org/10.18485/aeletters.2019.4.3.2
3D printing is state‐of‐the‐art manufacturing technology. In addition to prototyping, the development of this technology allows the parts produced by this technology to be used as fully functional assemblies. There are different 3D printing technologies (Fused Deposition Modeling, FDM, Selective Laser Sintering, SLS, Stereolithography, SLA and others), and different materials can be used (polymer filaments, polymer and composite powders for sintering, photopolymers). This paper presents the process of design and fabrication of small load bearing structures by FDM and verification of its mechanical properties, by using three point bending test. The printing parameters and setup of the three‐point bending test were analysed from aspects of flexural strength and final bending angle that was determined experimentally and by calculation.
Related Topics
Concepts
Fused deposition modeling
Stereolithography
Selective laser sintering
3D printing
Materials science
Rapid prototyping
Bending
Fabrication
Flexural strength
Composite material
Photopolymer
Load bearing
Polymer
Sintering
Mechanical engineering
Engineering
Polymerization
Medicine
Alternative medicine
Pathology
Metadata
- Type
- article
- Language
- en
- Landing Page
- https://doi.org/10.18485/aeletters.2019.4.3.2
- https://www.aeletters.com/wp-content/uploads/2019/10/AEL00161.pdf
- OA Status
- gold
- Cited By
- 11
- References
- 8
- Related Works
- 10
- OpenAlex ID
- https://openalex.org/W2979988414
All OpenAlex metadata
Raw OpenAlex JSON
- OpenAlex ID
-
https://openalex.org/W2979988414Canonical identifier for this work in OpenAlex
- DOI
-
https://doi.org/10.18485/aeletters.2019.4.3.2Digital Object Identifier
- Title
-
Mechanical Behaviour of Small Load Bearing Structures Fabricated by 3D PrintingWork title
- Type
-
articleOpenAlex work type
- Language
-
enPrimary language
- Publication year
-
2019Year of publication
- Publication date
-
2019-01-01Full publication date if available
- Authors
-
Nikola Palić, Vukašin Slavković, Živana Jovanović Pešić, Fatima Živić, Nenad GrujovićList of authors in order
- Landing page
-
https://doi.org/10.18485/aeletters.2019.4.3.2Publisher landing page
- PDF URL
-
https://www.aeletters.com/wp-content/uploads/2019/10/AEL00161.pdfDirect link to full text PDF
- Open access
-
YesWhether a free full text is available
- OA status
-
goldOpen access status per OpenAlex
- OA URL
-
https://www.aeletters.com/wp-content/uploads/2019/10/AEL00161.pdfDirect OA link when available
- Concepts
-
Fused deposition modeling, Stereolithography, Selective laser sintering, 3D printing, Materials science, Rapid prototyping, Bending, Fabrication, Flexural strength, Composite material, Photopolymer, Load bearing, Polymer, Sintering, Mechanical engineering, Engineering, Polymerization, Medicine, Alternative medicine, PathologyTop concepts (fields/topics) attached by OpenAlex
- Cited by
-
11Total citation count in OpenAlex
- Citations by year (recent)
-
2025: 3, 2024: 4, 2023: 2, 2021: 2Per-year citation counts (last 5 years)
- References (count)
-
8Number of works referenced by this work
- Related works (count)
-
10Other works algorithmically related by OpenAlex
Full payload
| id | https://openalex.org/W2979988414 |
|---|---|
| doi | https://doi.org/10.18485/aeletters.2019.4.3.2 |
| ids.doi | https://doi.org/10.18485/aeletters.2019.4.3.2 |
| ids.mag | 2979988414 |
| ids.openalex | https://openalex.org/W2979988414 |
| fwci | 0.26399266 |
| type | article |
| title | Mechanical Behaviour of Small Load Bearing Structures Fabricated by 3D Printing |
| biblio.issue | 3 |
| biblio.volume | 4 |
| biblio.last_page | 92 |
| biblio.first_page | 88 |
| topics[0].id | https://openalex.org/T10783 |
| topics[0].field.id | https://openalex.org/fields/22 |
| topics[0].field.display_name | Engineering |
| topics[0].score | 1.0 |
| topics[0].domain.id | https://openalex.org/domains/3 |
| topics[0].domain.display_name | Physical Sciences |
| topics[0].subfield.id | https://openalex.org/subfields/2203 |
| topics[0].subfield.display_name | Automotive Engineering |
| topics[0].display_name | Additive Manufacturing and 3D Printing Technologies |
| topics[1].id | https://openalex.org/T11159 |
| topics[1].field.id | https://openalex.org/fields/22 |
| topics[1].field.display_name | Engineering |
| topics[1].score | 0.9977999925613403 |
| topics[1].domain.id | https://openalex.org/domains/3 |
| topics[1].domain.display_name | Physical Sciences |
| topics[1].subfield.id | https://openalex.org/subfields/2209 |
| topics[1].subfield.display_name | Industrial and Manufacturing Engineering |
| topics[1].display_name | Manufacturing Process and Optimization |
| topics[2].id | https://openalex.org/T10705 |
| topics[2].field.id | https://openalex.org/fields/22 |
| topics[2].field.display_name | Engineering |
| topics[2].score | 0.9955999851226807 |
| topics[2].domain.id | https://openalex.org/domains/3 |
| topics[2].domain.display_name | Physical Sciences |
| topics[2].subfield.id | https://openalex.org/subfields/2210 |
| topics[2].subfield.display_name | Mechanical Engineering |
| topics[2].display_name | Additive Manufacturing Materials and Processes |
| is_xpac | False |
| apc_list.value | 100 |
| apc_list.currency | EUR |
| apc_list.value_usd | 107 |
| apc_paid.value | 100 |
| apc_paid.currency | EUR |
| apc_paid.value_usd | 107 |
| concepts[0].id | https://openalex.org/C2780329122 |
| concepts[0].level | 3 |
| concepts[0].score | 0.8689600825309753 |
| concepts[0].wikidata | https://www.wikidata.org/wiki/Q18349149 |
| concepts[0].display_name | Fused deposition modeling |
| concepts[1].id | https://openalex.org/C2779154291 |
| concepts[1].level | 2 |
| concepts[1].score | 0.8527503609657288 |
| concepts[1].wikidata | https://www.wikidata.org/wiki/Q1022471 |
| concepts[1].display_name | Stereolithography |
| concepts[2].id | https://openalex.org/C54237361 |
| concepts[2].level | 3 |
| concepts[2].score | 0.8017411231994629 |
| concepts[2].wikidata | https://www.wikidata.org/wiki/Q428412 |
| concepts[2].display_name | Selective laser sintering |
| concepts[3].id | https://openalex.org/C524769229 |
| concepts[3].level | 2 |
| concepts[3].score | 0.7736638784408569 |
| concepts[3].wikidata | https://www.wikidata.org/wiki/Q229367 |
| concepts[3].display_name | 3D printing |
| concepts[4].id | https://openalex.org/C192562407 |
| concepts[4].level | 0 |
| concepts[4].score | 0.7487493753433228 |
| concepts[4].wikidata | https://www.wikidata.org/wiki/Q228736 |
| concepts[4].display_name | Materials science |
| concepts[5].id | https://openalex.org/C2780395129 |
| concepts[5].level | 2 |
| concepts[5].score | 0.6988485455513 |
| concepts[5].wikidata | https://www.wikidata.org/wiki/Q1128971 |
| concepts[5].display_name | Rapid prototyping |
| concepts[6].id | https://openalex.org/C87210426 |
| concepts[6].level | 2 |
| concepts[6].score | 0.6775169372558594 |
| concepts[6].wikidata | https://www.wikidata.org/wiki/Q1072476 |
| concepts[6].display_name | Bending |
| concepts[7].id | https://openalex.org/C136525101 |
| concepts[7].level | 3 |
| concepts[7].score | 0.6265884041786194 |
| concepts[7].wikidata | https://www.wikidata.org/wiki/Q5428139 |
| concepts[7].display_name | Fabrication |
| concepts[8].id | https://openalex.org/C178405089 |
| concepts[8].level | 2 |
| concepts[8].score | 0.6249292492866516 |
| concepts[8].wikidata | https://www.wikidata.org/wiki/Q857201 |
| concepts[8].display_name | Flexural strength |
| concepts[9].id | https://openalex.org/C159985019 |
| concepts[9].level | 1 |
| concepts[9].score | 0.5725624561309814 |
| concepts[9].wikidata | https://www.wikidata.org/wiki/Q181790 |
| concepts[9].display_name | Composite material |
| concepts[10].id | https://openalex.org/C15487406 |
| concepts[10].level | 4 |
| concepts[10].score | 0.44046738743782043 |
| concepts[10].wikidata | https://www.wikidata.org/wiki/Q2631097 |
| concepts[10].display_name | Photopolymer |
| concepts[11].id | https://openalex.org/C2993075670 |
| concepts[11].level | 2 |
| concepts[11].score | 0.42752858996391296 |
| concepts[11].wikidata | https://www.wikidata.org/wiki/Q2313934 |
| concepts[11].display_name | Load bearing |
| concepts[12].id | https://openalex.org/C521977710 |
| concepts[12].level | 2 |
| concepts[12].score | 0.40066832304000854 |
| concepts[12].wikidata | https://www.wikidata.org/wiki/Q81163 |
| concepts[12].display_name | Polymer |
| concepts[13].id | https://openalex.org/C2777581544 |
| concepts[13].level | 2 |
| concepts[13].score | 0.3638197183609009 |
| concepts[13].wikidata | https://www.wikidata.org/wiki/Q844613 |
| concepts[13].display_name | Sintering |
| concepts[14].id | https://openalex.org/C78519656 |
| concepts[14].level | 1 |
| concepts[14].score | 0.3590320348739624 |
| concepts[14].wikidata | https://www.wikidata.org/wiki/Q101333 |
| concepts[14].display_name | Mechanical engineering |
| concepts[15].id | https://openalex.org/C127413603 |
| concepts[15].level | 0 |
| concepts[15].score | 0.0946584939956665 |
| concepts[15].wikidata | https://www.wikidata.org/wiki/Q11023 |
| concepts[15].display_name | Engineering |
| concepts[16].id | https://openalex.org/C44228677 |
| concepts[16].level | 3 |
| concepts[16].score | 0.05850359797477722 |
| concepts[16].wikidata | https://www.wikidata.org/wiki/Q181898 |
| concepts[16].display_name | Polymerization |
| concepts[17].id | https://openalex.org/C71924100 |
| concepts[17].level | 0 |
| concepts[17].score | 0.0 |
| concepts[17].wikidata | https://www.wikidata.org/wiki/Q11190 |
| concepts[17].display_name | Medicine |
| concepts[18].id | https://openalex.org/C204787440 |
| concepts[18].level | 2 |
| concepts[18].score | 0.0 |
| concepts[18].wikidata | https://www.wikidata.org/wiki/Q188504 |
| concepts[18].display_name | Alternative medicine |
| concepts[19].id | https://openalex.org/C142724271 |
| concepts[19].level | 1 |
| concepts[19].score | 0.0 |
| concepts[19].wikidata | https://www.wikidata.org/wiki/Q7208 |
| concepts[19].display_name | Pathology |
| keywords[0].id | https://openalex.org/keywords/fused-deposition-modeling |
| keywords[0].score | 0.8689600825309753 |
| keywords[0].display_name | Fused deposition modeling |
| keywords[1].id | https://openalex.org/keywords/stereolithography |
| keywords[1].score | 0.8527503609657288 |
| keywords[1].display_name | Stereolithography |
| keywords[2].id | https://openalex.org/keywords/selective-laser-sintering |
| keywords[2].score | 0.8017411231994629 |
| keywords[2].display_name | Selective laser sintering |
| keywords[3].id | https://openalex.org/keywords/3d-printing |
| keywords[3].score | 0.7736638784408569 |
| keywords[3].display_name | 3D printing |
| keywords[4].id | https://openalex.org/keywords/materials-science |
| keywords[4].score | 0.7487493753433228 |
| keywords[4].display_name | Materials science |
| keywords[5].id | https://openalex.org/keywords/rapid-prototyping |
| keywords[5].score | 0.6988485455513 |
| keywords[5].display_name | Rapid prototyping |
| keywords[6].id | https://openalex.org/keywords/bending |
| keywords[6].score | 0.6775169372558594 |
| keywords[6].display_name | Bending |
| keywords[7].id | https://openalex.org/keywords/fabrication |
| keywords[7].score | 0.6265884041786194 |
| keywords[7].display_name | Fabrication |
| keywords[8].id | https://openalex.org/keywords/flexural-strength |
| keywords[8].score | 0.6249292492866516 |
| keywords[8].display_name | Flexural strength |
| keywords[9].id | https://openalex.org/keywords/composite-material |
| keywords[9].score | 0.5725624561309814 |
| keywords[9].display_name | Composite material |
| keywords[10].id | https://openalex.org/keywords/photopolymer |
| keywords[10].score | 0.44046738743782043 |
| keywords[10].display_name | Photopolymer |
| keywords[11].id | https://openalex.org/keywords/load-bearing |
| keywords[11].score | 0.42752858996391296 |
| keywords[11].display_name | Load bearing |
| keywords[12].id | https://openalex.org/keywords/polymer |
| keywords[12].score | 0.40066832304000854 |
| keywords[12].display_name | Polymer |
| keywords[13].id | https://openalex.org/keywords/sintering |
| keywords[13].score | 0.3638197183609009 |
| keywords[13].display_name | Sintering |
| keywords[14].id | https://openalex.org/keywords/mechanical-engineering |
| keywords[14].score | 0.3590320348739624 |
| keywords[14].display_name | Mechanical engineering |
| keywords[15].id | https://openalex.org/keywords/engineering |
| keywords[15].score | 0.0946584939956665 |
| keywords[15].display_name | Engineering |
| keywords[16].id | https://openalex.org/keywords/polymerization |
| keywords[16].score | 0.05850359797477722 |
| keywords[16].display_name | Polymerization |
| language | en |
| locations[0].id | doi:10.18485/aeletters.2019.4.3.2 |
| locations[0].is_oa | True |
| locations[0].source.id | https://openalex.org/S4210189256 |
| locations[0].source.issn | 2466-4677, 2466-4847 |
| locations[0].source.type | journal |
| locations[0].source.is_oa | True |
| locations[0].source.issn_l | 2466-4677 |
| locations[0].source.is_core | True |
| locations[0].source.is_in_doaj | True |
| locations[0].source.display_name | Applied Engineering Letters Journal of Engineering and Applied Sciences |
| locations[0].source.host_organization | |
| locations[0].source.host_organization_name | |
| locations[0].license | cc-by-nc |
| locations[0].pdf_url | https://www.aeletters.com/wp-content/uploads/2019/10/AEL00161.pdf |
| locations[0].version | publishedVersion |
| locations[0].raw_type | journal-article |
| locations[0].license_id | https://openalex.org/licenses/cc-by-nc |
| locations[0].is_accepted | True |
| locations[0].is_published | True |
| locations[0].raw_source_name | Applied Engineering Letters : Journal of Engineering and Applied Sciences |
| locations[0].landing_page_url | https://doi.org/10.18485/aeletters.2019.4.3.2 |
| locations[1].id | pmh:oai:doaj.org/article:ab63e104545e4895a41981269fd6d308 |
| locations[1].is_oa | True |
| locations[1].source.id | https://openalex.org/S4306401280 |
| locations[1].source.issn | |
| locations[1].source.type | repository |
| locations[1].source.is_oa | False |
| locations[1].source.issn_l | |
| locations[1].source.is_core | False |
| locations[1].source.is_in_doaj | False |
| locations[1].source.display_name | DOAJ (DOAJ: Directory of Open Access Journals) |
| locations[1].source.host_organization | |
| locations[1].source.host_organization_name | |
| locations[1].license | cc-by-sa |
| locations[1].pdf_url | |
| locations[1].version | submittedVersion |
| locations[1].raw_type | article |
| locations[1].license_id | https://openalex.org/licenses/cc-by-sa |
| locations[1].is_accepted | False |
| locations[1].is_published | False |
| locations[1].raw_source_name | Applied Engineering Letters, Vol 4, Iss 3, Pp 88-92 (2019) |
| locations[1].landing_page_url | https://doaj.org/article/ab63e104545e4895a41981269fd6d308 |
| indexed_in | crossref, doaj |
| authorships[0].author.id | https://openalex.org/A5068039009 |
| authorships[0].author.orcid | https://orcid.org/0000-0002-7008-505X |
| authorships[0].author.display_name | Nikola Palić |
| authorships[0].countries | RS |
| authorships[0].affiliations[0].institution_ids | https://openalex.org/I14245010 |
| authorships[0].affiliations[0].raw_affiliation_string | University of Kragujevac, Faculty of Engineering, Sestre Janjić 6, 34000 Kragujevac, Serbia |
| authorships[0].institutions[0].id | https://openalex.org/I14245010 |
| authorships[0].institutions[0].ror | https://ror.org/04f7vj627 |
| authorships[0].institutions[0].type | education |
| authorships[0].institutions[0].lineage | https://openalex.org/I14245010 |
| authorships[0].institutions[0].country_code | RS |
| authorships[0].institutions[0].display_name | University of Kragujevac |
| authorships[0].author_position | first |
| authorships[0].raw_author_name | Nikola Palić |
| authorships[0].is_corresponding | False |
| authorships[0].raw_affiliation_strings | University of Kragujevac, Faculty of Engineering, Sestre Janjić 6, 34000 Kragujevac, Serbia |
| authorships[1].author.id | https://openalex.org/A5083089228 |
| authorships[1].author.orcid | https://orcid.org/0000-0002-1103-6565 |
| authorships[1].author.display_name | Vukašin Slavković |
| authorships[1].countries | RS |
| authorships[1].affiliations[0].institution_ids | https://openalex.org/I14245010 |
| authorships[1].affiliations[0].raw_affiliation_string | University of Kragujevac, Faculty of Engineering, Sestre Janjić 6, 34000 Kragujevac, Serbia |
| authorships[1].institutions[0].id | https://openalex.org/I14245010 |
| authorships[1].institutions[0].ror | https://ror.org/04f7vj627 |
| authorships[1].institutions[0].type | education |
| authorships[1].institutions[0].lineage | https://openalex.org/I14245010 |
| authorships[1].institutions[0].country_code | RS |
| authorships[1].institutions[0].display_name | University of Kragujevac |
| authorships[1].author_position | middle |
| authorships[1].raw_author_name | Vukašin Slavković |
| authorships[1].is_corresponding | False |
| authorships[1].raw_affiliation_strings | University of Kragujevac, Faculty of Engineering, Sestre Janjić 6, 34000 Kragujevac, Serbia |
| authorships[2].author.id | https://openalex.org/A5013106475 |
| authorships[2].author.orcid | https://orcid.org/0000-0002-1373-0040 |
| authorships[2].author.display_name | Živana Jovanović Pešić |
| authorships[2].countries | RS |
| authorships[2].affiliations[0].institution_ids | https://openalex.org/I14245010 |
| authorships[2].affiliations[0].raw_affiliation_string | University of Kragujevac, Faculty of Engineering, Sestre Janjić 6, 34000 Kragujevac, Serbia |
| authorships[2].institutions[0].id | https://openalex.org/I14245010 |
| authorships[2].institutions[0].ror | https://ror.org/04f7vj627 |
| authorships[2].institutions[0].type | education |
| authorships[2].institutions[0].lineage | https://openalex.org/I14245010 |
| authorships[2].institutions[0].country_code | RS |
| authorships[2].institutions[0].display_name | University of Kragujevac |
| authorships[2].author_position | middle |
| authorships[2].raw_author_name | Živana Jovanović |
| authorships[2].is_corresponding | False |
| authorships[2].raw_affiliation_strings | University of Kragujevac, Faculty of Engineering, Sestre Janjić 6, 34000 Kragujevac, Serbia |
| authorships[3].author.id | https://openalex.org/A5081526047 |
| authorships[3].author.orcid | https://orcid.org/0000-0003-2509-187X |
| authorships[3].author.display_name | Fatima Živić |
| authorships[3].countries | RS |
| authorships[3].affiliations[0].institution_ids | https://openalex.org/I14245010 |
| authorships[3].affiliations[0].raw_affiliation_string | University of Kragujevac, Faculty of Engineering, Sestre Janjić 6, 34000 Kragujevac, Serbia |
| authorships[3].institutions[0].id | https://openalex.org/I14245010 |
| authorships[3].institutions[0].ror | https://ror.org/04f7vj627 |
| authorships[3].institutions[0].type | education |
| authorships[3].institutions[0].lineage | https://openalex.org/I14245010 |
| authorships[3].institutions[0].country_code | RS |
| authorships[3].institutions[0].display_name | University of Kragujevac |
| authorships[3].author_position | middle |
| authorships[3].raw_author_name | Fatima Živić |
| authorships[3].is_corresponding | False |
| authorships[3].raw_affiliation_strings | University of Kragujevac, Faculty of Engineering, Sestre Janjić 6, 34000 Kragujevac, Serbia |
| authorships[4].author.id | https://openalex.org/A5048582520 |
| authorships[4].author.orcid | https://orcid.org/0000-0002-8765-2196 |
| authorships[4].author.display_name | Nenad Grujović |
| authorships[4].countries | RS |
| authorships[4].affiliations[0].institution_ids | https://openalex.org/I14245010 |
| authorships[4].affiliations[0].raw_affiliation_string | University of Kragujevac, Faculty of Engineering, Sestre Janjić 6, 34000 Kragujevac, Serbia |
| authorships[4].institutions[0].id | https://openalex.org/I14245010 |
| authorships[4].institutions[0].ror | https://ror.org/04f7vj627 |
| authorships[4].institutions[0].type | education |
| authorships[4].institutions[0].lineage | https://openalex.org/I14245010 |
| authorships[4].institutions[0].country_code | RS |
| authorships[4].institutions[0].display_name | University of Kragujevac |
| authorships[4].author_position | last |
| authorships[4].raw_author_name | Nenad Grujović |
| authorships[4].is_corresponding | False |
| authorships[4].raw_affiliation_strings | University of Kragujevac, Faculty of Engineering, Sestre Janjić 6, 34000 Kragujevac, Serbia |
| has_content.pdf | True |
| has_content.grobid_xml | True |
| is_paratext | False |
| open_access.is_oa | True |
| open_access.oa_url | https://www.aeletters.com/wp-content/uploads/2019/10/AEL00161.pdf |
| open_access.oa_status | gold |
| open_access.any_repository_has_fulltext | False |
| created_date | 2025-10-10T00:00:00 |
| display_name | Mechanical Behaviour of Small Load Bearing Structures Fabricated by 3D Printing |
| has_fulltext | True |
| is_retracted | False |
| updated_date | 2025-11-06T03:46:38.306776 |
| primary_topic.id | https://openalex.org/T10783 |
| primary_topic.field.id | https://openalex.org/fields/22 |
| primary_topic.field.display_name | Engineering |
| primary_topic.score | 1.0 |
| primary_topic.domain.id | https://openalex.org/domains/3 |
| primary_topic.domain.display_name | Physical Sciences |
| primary_topic.subfield.id | https://openalex.org/subfields/2203 |
| primary_topic.subfield.display_name | Automotive Engineering |
| primary_topic.display_name | Additive Manufacturing and 3D Printing Technologies |
| related_works | https://openalex.org/W988724353, https://openalex.org/W882369995, https://openalex.org/W857831914, https://openalex.org/W2011366377, https://openalex.org/W4392739605, https://openalex.org/W4401843391, https://openalex.org/W2333718311, https://openalex.org/W2900621920, https://openalex.org/W2384464911, https://openalex.org/W3162516691 |
| cited_by_count | 11 |
| counts_by_year[0].year | 2025 |
| counts_by_year[0].cited_by_count | 3 |
| counts_by_year[1].year | 2024 |
| counts_by_year[1].cited_by_count | 4 |
| counts_by_year[2].year | 2023 |
| counts_by_year[2].cited_by_count | 2 |
| counts_by_year[3].year | 2021 |
| counts_by_year[3].cited_by_count | 2 |
| locations_count | 2 |
| best_oa_location.id | doi:10.18485/aeletters.2019.4.3.2 |
| best_oa_location.is_oa | True |
| best_oa_location.source.id | https://openalex.org/S4210189256 |
| best_oa_location.source.issn | 2466-4677, 2466-4847 |
| best_oa_location.source.type | journal |
| best_oa_location.source.is_oa | True |
| best_oa_location.source.issn_l | 2466-4677 |
| best_oa_location.source.is_core | True |
| best_oa_location.source.is_in_doaj | True |
| best_oa_location.source.display_name | Applied Engineering Letters Journal of Engineering and Applied Sciences |
| best_oa_location.source.host_organization | |
| best_oa_location.source.host_organization_name | |
| best_oa_location.license | cc-by-nc |
| best_oa_location.pdf_url | https://www.aeletters.com/wp-content/uploads/2019/10/AEL00161.pdf |
| best_oa_location.version | publishedVersion |
| best_oa_location.raw_type | journal-article |
| best_oa_location.license_id | https://openalex.org/licenses/cc-by-nc |
| best_oa_location.is_accepted | True |
| best_oa_location.is_published | True |
| best_oa_location.raw_source_name | Applied Engineering Letters : Journal of Engineering and Applied Sciences |
| best_oa_location.landing_page_url | https://doi.org/10.18485/aeletters.2019.4.3.2 |
| primary_location.id | doi:10.18485/aeletters.2019.4.3.2 |
| primary_location.is_oa | True |
| primary_location.source.id | https://openalex.org/S4210189256 |
| primary_location.source.issn | 2466-4677, 2466-4847 |
| primary_location.source.type | journal |
| primary_location.source.is_oa | True |
| primary_location.source.issn_l | 2466-4677 |
| primary_location.source.is_core | True |
| primary_location.source.is_in_doaj | True |
| primary_location.source.display_name | Applied Engineering Letters Journal of Engineering and Applied Sciences |
| primary_location.source.host_organization | |
| primary_location.source.host_organization_name | |
| primary_location.license | cc-by-nc |
| primary_location.pdf_url | https://www.aeletters.com/wp-content/uploads/2019/10/AEL00161.pdf |
| primary_location.version | publishedVersion |
| primary_location.raw_type | journal-article |
| primary_location.license_id | https://openalex.org/licenses/cc-by-nc |
| primary_location.is_accepted | True |
| primary_location.is_published | True |
| primary_location.raw_source_name | Applied Engineering Letters : Journal of Engineering and Applied Sciences |
| primary_location.landing_page_url | https://doi.org/10.18485/aeletters.2019.4.3.2 |
| publication_date | 2019-01-01 |
| publication_year | 2019 |
| referenced_works | https://openalex.org/W2798050947, https://openalex.org/W2900825806, https://openalex.org/W2902967053, https://openalex.org/W2900086716, https://openalex.org/W2902237928, https://openalex.org/W2911595541, https://openalex.org/W2790208464, https://openalex.org/W2531912199 |
| referenced_works_count | 8 |
| abstract_inverted_index.3D | 0, 32 |
| abstract_inverted_index.In | 6 |
| abstract_inverted_index.as | 25 |
| abstract_inverted_index.be | 23, 51 |
| abstract_inverted_index.by | 19, 76, 84, 116 |
| abstract_inverted_index.is | 2 |
| abstract_inverted_index.of | 12, 67, 71, 80, 95, 104 |
| abstract_inverted_index.to | 8, 22 |
| abstract_inverted_index.FDM | 77 |
| abstract_inverted_index.SLA | 44 |
| abstract_inverted_index.The | 90 |
| abstract_inverted_index.and | 45, 47, 56, 69, 78, 93, 107, 115 |
| abstract_inverted_index.are | 30 |
| abstract_inverted_index.can | 50 |
| abstract_inverted_index.for | 59 |
| abstract_inverted_index.its | 81 |
| abstract_inverted_index.the | 10, 16, 65, 96 |
| abstract_inverted_index.was | 112 |
| abstract_inverted_index.FDM, | 38 |
| abstract_inverted_index.SLS, | 42 |
| abstract_inverted_index.This | 62 |
| abstract_inverted_index.from | 102 |
| abstract_inverted_index.load | 73 |
| abstract_inverted_index.test | 99 |
| abstract_inverted_index.that | 111 |
| abstract_inverted_index.this | 13, 20 |
| abstract_inverted_index.used | 24, 52 |
| abstract_inverted_index.were | 100 |
| abstract_inverted_index.Laser | 40 |
| abstract_inverted_index.There | 29 |
| abstract_inverted_index.angle | 110 |
| abstract_inverted_index.final | 108 |
| abstract_inverted_index.fully | 26 |
| abstract_inverted_index.paper | 63 |
| abstract_inverted_index.parts | 17 |
| abstract_inverted_index.point | 87 |
| abstract_inverted_index.setup | 94 |
| abstract_inverted_index.small | 72 |
| abstract_inverted_index.test. | 89 |
| abstract_inverted_index.three | 86 |
| abstract_inverted_index.using | 85 |
| abstract_inverted_index.(Fused | 35 |
| abstract_inverted_index.allows | 15 |
| abstract_inverted_index.design | 68 |
| abstract_inverted_index.aspects | 103 |
| abstract_inverted_index.bearing | 74 |
| abstract_inverted_index.bending | 88, 98, 109 |
| abstract_inverted_index.polymer | 55 |
| abstract_inverted_index.powders | 58 |
| abstract_inverted_index.process | 66 |
| abstract_inverted_index.(polymer | 53 |
| abstract_inverted_index.addition | 7 |
| abstract_inverted_index.analysed | 101 |
| abstract_inverted_index.flexural | 105 |
| abstract_inverted_index.others), | 46 |
| abstract_inverted_index.presents | 64 |
| abstract_inverted_index.printing | 1, 33, 91 |
| abstract_inverted_index.produced | 18 |
| abstract_inverted_index.strength | 106 |
| abstract_inverted_index.Modeling, | 37 |
| abstract_inverted_index.Selective | 39 |
| abstract_inverted_index.composite | 57 |
| abstract_inverted_index.different | 31, 48 |
| abstract_inverted_index.materials | 49 |
| abstract_inverted_index.Deposition | 36 |
| abstract_inverted_index.Sintering, | 41 |
| abstract_inverted_index.determined | 113 |
| abstract_inverted_index.filaments, | 54 |
| abstract_inverted_index.functional | 27 |
| abstract_inverted_index.mechanical | 82 |
| abstract_inverted_index.parameters | 92 |
| abstract_inverted_index.sintering, | 60 |
| abstract_inverted_index.structures | 75 |
| abstract_inverted_index.technology | 14, 21 |
| abstract_inverted_index.assemblies. | 28 |
| abstract_inverted_index.development | 11 |
| abstract_inverted_index.fabrication | 70 |
| abstract_inverted_index.properties, | 83 |
| abstract_inverted_index.technology. | 5 |
| abstract_inverted_index.calculation. | 117 |
| abstract_inverted_index.prototyping, | 9 |
| abstract_inverted_index.technologies | 34 |
| abstract_inverted_index.verification | 79 |
| abstract_inverted_index.manufacturing | 4 |
| abstract_inverted_index.three‐point | 97 |
| abstract_inverted_index.experimentally | 114 |
| abstract_inverted_index.photopolymers). | 61 |
| abstract_inverted_index.Stereolithography, | 43 |
| abstract_inverted_index.state‐of‐the‐art | 3 |
| cited_by_percentile_year.max | 98 |
| cited_by_percentile_year.min | 93 |
| countries_distinct_count | 1 |
| institutions_distinct_count | 5 |
| citation_normalized_percentile.value | 0.59827633 |
| citation_normalized_percentile.is_in_top_1_percent | False |
| citation_normalized_percentile.is_in_top_10_percent | False |