Mechanical optimization of plate-screw interfaces in variable-angle locking systems: a parametric study Article Swipe
Chi Lin
,
S. C. Wang
,
Kuan-Chung Lin
,
Michael Y. Hu
·
YOU?
·
· 2025
· Open Access
·
· DOI: https://doi.org/10.3389/fbioe.2025.1681460
YOU?
·
· 2025
· Open Access
·
· DOI: https://doi.org/10.3389/fbioe.2025.1681460
Introduction Variable-angle locking systems offer increased surgical flexibility by permitting off-axis screw insertion, with some designs allowing angulation up to 15°. However, clinical challenges such as screw loosening and insufficient mechanical stability data persist. This study aims to evaluate the impact of different plate hole design parameters on the locking strength of plate-screw head interface under various screw insertion angles, providing insights to optimize VALS performance in fracture fixation. Methods Variable-angle locking system with Point-Loading Thread-In mechanism was designed for investigation. Variations in locking hole design were evaluated based on slot size (1.3 mm vs. 1.5 mm), number of thread columns (three vs. four), and cone angle (20° vs. 22°). A total of eight distinct design groups were included for analysis. The screws, inserted at different inclinations (0°–15°), and locked at 0.8 Nm were subjected to a cantilever load-to-failure test. Ultimate bending moment at the screw-head interface and failure mode of the locking mechanism were determined. Results The results exhibited a decrease in bending strength with increasing screw angulation in both three- and four-thread designs, with all groups exceeding 1 Nm at 0° but falling below 1 Nm at 15°. The highest bending moment was 1.46 Nm in the three-thread-column design at 0°, compared with 1.32 Nm in the four-thread-column design. At 15° screw angulation, the highest moments were 0.92 Nm and 0.90 Nm for the three-thread and four-thread designs, respectively. The plate hole with 1.3 mm slot, three thread column and 22° cone design showed higher bending moment than all other designs at each insertion angles. Discussion Plate hole design—specifically slot size, thread number, and cone angle—significantly influences locking strength. The optimal design (3 slots, 1.3 mm, 22°) offers superior mechanical stability, guiding device optimization.
Related Topics
Concepts
No concepts available.
Metadata
- Type
- article
- Language
- en
- Landing Page
- https://doi.org/10.3389/fbioe.2025.1681460
- https://public-pages-files-2025.frontiersin.org/journals/bioengineering-and-biotechnology/articles/10.3389/fbioe.2025.1681460/pdf
- OA Status
- gold
- References
- 18
- OpenAlex ID
- https://openalex.org/W4415685360
All OpenAlex metadata
Raw OpenAlex JSON
- OpenAlex ID
-
https://openalex.org/W4415685360Canonical identifier for this work in OpenAlex
- DOI
-
https://doi.org/10.3389/fbioe.2025.1681460Digital Object Identifier
- Title
-
Mechanical optimization of plate-screw interfaces in variable-angle locking systems: a parametric studyWork title
- Type
-
articleOpenAlex work type
- Language
-
enPrimary language
- Publication year
-
2025Year of publication
- Publication date
-
2025-10-30Full publication date if available
- Authors
-
Chi Lin, S. C. Wang, Kuan-Chung Lin, Michael Y. HuList of authors in order
- Landing page
-
https://doi.org/10.3389/fbioe.2025.1681460Publisher landing page
- PDF URL
-
https://public-pages-files-2025.frontiersin.org/journals/bioengineering-and-biotechnology/articles/10.3389/fbioe.2025.1681460/pdfDirect link to full text PDF
- Open access
-
YesWhether a free full text is available
- OA status
-
goldOpen access status per OpenAlex
- OA URL
-
https://public-pages-files-2025.frontiersin.org/journals/bioengineering-and-biotechnology/articles/10.3389/fbioe.2025.1681460/pdfDirect OA link when available
- Cited by
-
0Total citation count in OpenAlex
- References (count)
-
18Number of works referenced by this work
Full payload
| id | https://openalex.org/W4415685360 |
|---|---|
| doi | https://doi.org/10.3389/fbioe.2025.1681460 |
| ids.doi | https://doi.org/10.3389/fbioe.2025.1681460 |
| ids.pmid | https://pubmed.ncbi.nlm.nih.gov/41245634 |
| ids.openalex | https://openalex.org/W4415685360 |
| fwci | |
| type | article |
| title | Mechanical optimization of plate-screw interfaces in variable-angle locking systems: a parametric study |
| biblio.issue | |
| biblio.volume | 13 |
| biblio.last_page | 1681460 |
| biblio.first_page | 1681460 |
| is_xpac | False |
| apc_list.value | 2950 |
| apc_list.currency | USD |
| apc_list.value_usd | 2950 |
| apc_paid.value | 2950 |
| apc_paid.currency | USD |
| apc_paid.value_usd | 2950 |
| language | en |
| locations[0].id | doi:10.3389/fbioe.2025.1681460 |
| locations[0].is_oa | True |
| locations[0].source.id | https://openalex.org/S2595131146 |
| locations[0].source.issn | 2296-4185 |
| locations[0].source.type | journal |
| locations[0].source.is_oa | True |
| locations[0].source.issn_l | 2296-4185 |
| locations[0].source.is_core | True |
| locations[0].source.is_in_doaj | True |
| locations[0].source.display_name | Frontiers in Bioengineering and Biotechnology |
| locations[0].source.host_organization | https://openalex.org/P4310320527 |
| locations[0].source.host_organization_name | Frontiers Media |
| locations[0].source.host_organization_lineage | https://openalex.org/P4310320527 |
| locations[0].source.host_organization_lineage_names | Frontiers Media |
| locations[0].license | cc-by |
| locations[0].pdf_url | https://public-pages-files-2025.frontiersin.org/journals/bioengineering-and-biotechnology/articles/10.3389/fbioe.2025.1681460/pdf |
| locations[0].version | publishedVersion |
| locations[0].raw_type | journal-article |
| locations[0].license_id | https://openalex.org/licenses/cc-by |
| locations[0].is_accepted | True |
| locations[0].is_published | True |
| locations[0].raw_source_name | Frontiers in Bioengineering and Biotechnology |
| locations[0].landing_page_url | https://doi.org/10.3389/fbioe.2025.1681460 |
| locations[1].id | pmid:41245634 |
| locations[1].is_oa | False |
| locations[1].source.id | https://openalex.org/S4306525036 |
| locations[1].source.issn | |
| locations[1].source.type | repository |
| locations[1].source.is_oa | False |
| locations[1].source.issn_l | |
| locations[1].source.is_core | False |
| locations[1].source.is_in_doaj | False |
| locations[1].source.display_name | PubMed |
| locations[1].source.host_organization | https://openalex.org/I1299303238 |
| locations[1].source.host_organization_name | National Institutes of Health |
| locations[1].source.host_organization_lineage | https://openalex.org/I1299303238 |
| locations[1].license | |
| locations[1].pdf_url | |
| locations[1].version | publishedVersion |
| locations[1].raw_type | |
| locations[1].license_id | |
| locations[1].is_accepted | True |
| locations[1].is_published | True |
| locations[1].raw_source_name | Frontiers in bioengineering and biotechnology |
| locations[1].landing_page_url | https://pubmed.ncbi.nlm.nih.gov/41245634 |
| locations[2].id | pmh:oai:doaj.org/article:7f8fd091ec2745c38de3777be954c1f1 |
| locations[2].is_oa | False |
| locations[2].source.id | https://openalex.org/S4306401280 |
| locations[2].source.issn | |
| locations[2].source.type | repository |
| locations[2].source.is_oa | False |
| locations[2].source.issn_l | |
| locations[2].source.is_core | False |
| locations[2].source.is_in_doaj | False |
| locations[2].source.display_name | DOAJ (DOAJ: Directory of Open Access Journals) |
| locations[2].source.host_organization | |
| locations[2].source.host_organization_name | |
| locations[2].license | |
| locations[2].pdf_url | |
| locations[2].version | submittedVersion |
| locations[2].raw_type | article |
| locations[2].license_id | |
| locations[2].is_accepted | False |
| locations[2].is_published | False |
| locations[2].raw_source_name | Frontiers in Bioengineering and Biotechnology, Vol 13 (2025) |
| locations[2].landing_page_url | https://doaj.org/article/7f8fd091ec2745c38de3777be954c1f1 |
| locations[3].id | pmh:oai:europepmc.org:11420342 |
| locations[3].is_oa | True |
| locations[3].source.id | https://openalex.org/S4306400806 |
| locations[3].source.issn | |
| locations[3].source.type | repository |
| locations[3].source.is_oa | False |
| locations[3].source.issn_l | |
| locations[3].source.is_core | False |
| locations[3].source.is_in_doaj | False |
| locations[3].source.display_name | Europe PMC (PubMed Central) |
| locations[3].source.host_organization | https://openalex.org/I1303153112 |
| locations[3].source.host_organization_name | European Bioinformatics Institute |
| locations[3].source.host_organization_lineage | https://openalex.org/I1303153112 |
| locations[3].license | other-oa |
| locations[3].pdf_url | |
| locations[3].version | submittedVersion |
| locations[3].raw_type | Text |
| locations[3].license_id | https://openalex.org/licenses/other-oa |
| locations[3].is_accepted | False |
| locations[3].is_published | False |
| locations[3].raw_source_name | |
| locations[3].landing_page_url | https://www.ncbi.nlm.nih.gov/pmc/articles/12611835 |
| indexed_in | crossref, doaj, pubmed |
| authorships[0].author.id | https://openalex.org/A5070146210 |
| authorships[0].author.orcid | https://orcid.org/0000-0002-7279-0473 |
| authorships[0].author.display_name | Chi Lin |
| authorships[0].countries | TW |
| authorships[0].affiliations[0].institution_ids | https://openalex.org/I4210131804, https://openalex.org/I75357094 |
| authorships[0].affiliations[0].raw_affiliation_string | Department of Orthopedics, National Taiwan University Hospital Yunlin Branch, Yunlin, Taiwan |
| authorships[0].institutions[0].id | https://openalex.org/I4210131804 |
| authorships[0].institutions[0].ror | https://ror.org/03nteze27 |
| authorships[0].institutions[0].type | healthcare |
| authorships[0].institutions[0].lineage | https://openalex.org/I4210131804 |
| authorships[0].institutions[0].country_code | TW |
| authorships[0].institutions[0].display_name | National Taiwan University Hospital |
| authorships[0].institutions[1].id | https://openalex.org/I75357094 |
| authorships[0].institutions[1].ror | https://ror.org/04qkq2m54 |
| authorships[0].institutions[1].type | education |
| authorships[0].institutions[1].lineage | https://openalex.org/I75357094 |
| authorships[0].institutions[1].country_code | TW |
| authorships[0].institutions[1].display_name | National Yunlin University of Science and Technology |
| authorships[0].author_position | first |
| authorships[0].raw_author_name | Chen-Chiang Lin |
| authorships[0].is_corresponding | False |
| authorships[0].raw_affiliation_strings | Department of Orthopedics, National Taiwan University Hospital Yunlin Branch, Yunlin, Taiwan |
| authorships[1].author.id | https://openalex.org/A5015565552 |
| authorships[1].author.orcid | |
| authorships[1].author.display_name | S. C. Wang |
| authorships[1].countries | TW |
| authorships[1].affiliations[0].institution_ids | https://openalex.org/I162838928 |
| authorships[1].affiliations[0].raw_affiliation_string | Department of Post-Baccalaureate Medicine, College of Medicine, National Chung Hsing University, Taichung, Taiwan |
| authorships[1].affiliations[1].institution_ids | https://openalex.org/I4210091773 |
| authorships[1].affiliations[1].raw_affiliation_string | Department of Orthopedics, Taichung Veterans General Hospital, Taichung, Taiwan |
| authorships[1].institutions[0].id | https://openalex.org/I162838928 |
| authorships[1].institutions[0].ror | https://ror.org/05vn3ca78 |
| authorships[1].institutions[0].type | education |
| authorships[1].institutions[0].lineage | https://openalex.org/I162838928 |
| authorships[1].institutions[0].country_code | TW |
| authorships[1].institutions[0].display_name | National Chung Hsing University |
| authorships[1].institutions[1].id | https://openalex.org/I4210091773 |
| authorships[1].institutions[1].ror | https://ror.org/00e87hq62 |
| authorships[1].institutions[1].type | healthcare |
| authorships[1].institutions[1].lineage | https://openalex.org/I4210091773 |
| authorships[1].institutions[1].country_code | TW |
| authorships[1].institutions[1].display_name | Taichung Veterans General Hospital |
| authorships[1].author_position | middle |
| authorships[1].raw_author_name | Shun-Ping Wang |
| authorships[1].is_corresponding | False |
| authorships[1].raw_affiliation_strings | Department of Orthopedics, Taichung Veterans General Hospital, Taichung, Taiwan, Department of Post-Baccalaureate Medicine, College of Medicine, National Chung Hsing University, Taichung, Taiwan |
| authorships[2].author.id | https://openalex.org/A5018335160 |
| authorships[2].author.orcid | https://orcid.org/0000-0002-3787-2078 |
| authorships[2].author.display_name | Kuan-Chung Lin |
| authorships[2].countries | TW |
| authorships[2].affiliations[0].institution_ids | https://openalex.org/I151221077 |
| authorships[2].affiliations[0].raw_affiliation_string | Technology Translation Center for Medical Device, Chung Yuan Christian University, Taoyuan, Taiwan |
| authorships[2].institutions[0].id | https://openalex.org/I151221077 |
| authorships[2].institutions[0].ror | https://ror.org/02w8ws377 |
| authorships[2].institutions[0].type | education |
| authorships[2].institutions[0].lineage | https://openalex.org/I151221077 |
| authorships[2].institutions[0].country_code | TW |
| authorships[2].institutions[0].display_name | Chung Yuan Christian University |
| authorships[2].author_position | middle |
| authorships[2].raw_author_name | Kun-Jhih Lin |
| authorships[2].is_corresponding | False |
| authorships[2].raw_affiliation_strings | Technology Translation Center for Medical Device, Chung Yuan Christian University, Taoyuan, Taiwan |
| authorships[3].author.id | https://openalex.org/A5045250992 |
| authorships[3].author.orcid | https://orcid.org/0000-0002-3718-7169 |
| authorships[3].author.display_name | Michael Y. Hu |
| authorships[3].countries | TW |
| authorships[3].affiliations[0].institution_ids | https://openalex.org/I162838928 |
| authorships[3].affiliations[0].raw_affiliation_string | Department of Post-Baccalaureate Medicine, College of Medicine, National Chung Hsing University, Taichung, Taiwan |
| authorships[3].affiliations[1].institution_ids | https://openalex.org/I4210124028 |
| authorships[3].affiliations[1].raw_affiliation_string | Department of Orthopedics, Show Chwan Memorial Hospital, Changhua, Taiwan |
| authorships[3].institutions[0].id | https://openalex.org/I4210124028 |
| authorships[3].institutions[0].ror | https://ror.org/02ntc9t93 |
| authorships[3].institutions[0].type | healthcare |
| authorships[3].institutions[0].lineage | https://openalex.org/I4210124028 |
| authorships[3].institutions[0].country_code | TW |
| authorships[3].institutions[0].display_name | Chang Bing Show Chwan Memorial Hospital |
| authorships[3].institutions[1].id | https://openalex.org/I162838928 |
| authorships[3].institutions[1].ror | https://ror.org/05vn3ca78 |
| authorships[3].institutions[1].type | education |
| authorships[3].institutions[1].lineage | https://openalex.org/I162838928 |
| authorships[3].institutions[1].country_code | TW |
| authorships[3].institutions[1].display_name | National Chung Hsing University |
| authorships[3].author_position | last |
| authorships[3].raw_author_name | Ming-Hsien Hu |
| authorships[3].is_corresponding | True |
| authorships[3].raw_affiliation_strings | Department of Orthopedics, Show Chwan Memorial Hospital, Changhua, Taiwan, Department of Post-Baccalaureate Medicine, College of Medicine, National Chung Hsing University, Taichung, Taiwan |
| has_content.pdf | True |
| has_content.grobid_xml | False |
| is_paratext | False |
| open_access.is_oa | True |
| open_access.oa_url | https://public-pages-files-2025.frontiersin.org/journals/bioengineering-and-biotechnology/articles/10.3389/fbioe.2025.1681460/pdf |
| open_access.oa_status | gold |
| open_access.any_repository_has_fulltext | False |
| created_date | 2025-10-30T00:00:00 |
| display_name | Mechanical optimization of plate-screw interfaces in variable-angle locking systems: a parametric study |
| has_fulltext | False |
| is_retracted | False |
| updated_date | 2025-11-06T03:46:38.306776 |
| primary_topic | |
| cited_by_count | 0 |
| locations_count | 4 |
| best_oa_location.id | doi:10.3389/fbioe.2025.1681460 |
| best_oa_location.is_oa | True |
| best_oa_location.source.id | https://openalex.org/S2595131146 |
| best_oa_location.source.issn | 2296-4185 |
| best_oa_location.source.type | journal |
| best_oa_location.source.is_oa | True |
| best_oa_location.source.issn_l | 2296-4185 |
| best_oa_location.source.is_core | True |
| best_oa_location.source.is_in_doaj | True |
| best_oa_location.source.display_name | Frontiers in Bioengineering and Biotechnology |
| best_oa_location.source.host_organization | https://openalex.org/P4310320527 |
| best_oa_location.source.host_organization_name | Frontiers Media |
| best_oa_location.source.host_organization_lineage | https://openalex.org/P4310320527 |
| best_oa_location.source.host_organization_lineage_names | Frontiers Media |
| best_oa_location.license | cc-by |
| best_oa_location.pdf_url | https://public-pages-files-2025.frontiersin.org/journals/bioengineering-and-biotechnology/articles/10.3389/fbioe.2025.1681460/pdf |
| best_oa_location.version | publishedVersion |
| best_oa_location.raw_type | journal-article |
| best_oa_location.license_id | https://openalex.org/licenses/cc-by |
| best_oa_location.is_accepted | True |
| best_oa_location.is_published | True |
| best_oa_location.raw_source_name | Frontiers in Bioengineering and Biotechnology |
| best_oa_location.landing_page_url | https://doi.org/10.3389/fbioe.2025.1681460 |
| primary_location.id | doi:10.3389/fbioe.2025.1681460 |
| primary_location.is_oa | True |
| primary_location.source.id | https://openalex.org/S2595131146 |
| primary_location.source.issn | 2296-4185 |
| primary_location.source.type | journal |
| primary_location.source.is_oa | True |
| primary_location.source.issn_l | 2296-4185 |
| primary_location.source.is_core | True |
| primary_location.source.is_in_doaj | True |
| primary_location.source.display_name | Frontiers in Bioengineering and Biotechnology |
| primary_location.source.host_organization | https://openalex.org/P4310320527 |
| primary_location.source.host_organization_name | Frontiers Media |
| primary_location.source.host_organization_lineage | https://openalex.org/P4310320527 |
| primary_location.source.host_organization_lineage_names | Frontiers Media |
| primary_location.license | cc-by |
| primary_location.pdf_url | https://public-pages-files-2025.frontiersin.org/journals/bioengineering-and-biotechnology/articles/10.3389/fbioe.2025.1681460/pdf |
| primary_location.version | publishedVersion |
| primary_location.raw_type | journal-article |
| primary_location.license_id | https://openalex.org/licenses/cc-by |
| primary_location.is_accepted | True |
| primary_location.is_published | True |
| primary_location.raw_source_name | Frontiers in Bioengineering and Biotechnology |
| primary_location.landing_page_url | https://doi.org/10.3389/fbioe.2025.1681460 |
| publication_date | 2025-10-30 |
| publication_year | 2025 |
| referenced_works | https://openalex.org/W2036241259, https://openalex.org/W4286506826, https://openalex.org/W2137767661, https://openalex.org/W2079981987, https://openalex.org/W4389547393, https://openalex.org/W4389488724, https://openalex.org/W2002728607, https://openalex.org/W2059134239, https://openalex.org/W2056480009, https://openalex.org/W1977966176, https://openalex.org/W1906637560, https://openalex.org/W4403389767, https://openalex.org/W2066958009, https://openalex.org/W3159192731, https://openalex.org/W2890319334, https://openalex.org/W4394687059, https://openalex.org/W2256989703, https://openalex.org/W2419093473 |
| referenced_works_count | 18 |
| abstract_inverted_index.1 | 179, 186 |
| abstract_inverted_index.A | 110 |
| abstract_inverted_index.a | 136, 160 |
| abstract_inverted_index.(3 | 274 |
| abstract_inverted_index.At | 211 |
| abstract_inverted_index.Nm | 132, 180, 187, 196, 206, 220, 223 |
| abstract_inverted_index.as | 25 |
| abstract_inverted_index.at | 124, 130, 143, 181, 188, 201, 253 |
| abstract_inverted_index.by | 8 |
| abstract_inverted_index.in | 66, 82, 162, 169, 197, 207 |
| abstract_inverted_index.mm | 93, 236 |
| abstract_inverted_index.of | 41, 51, 98, 112, 150 |
| abstract_inverted_index.on | 47, 89 |
| abstract_inverted_index.to | 19, 37, 62, 135 |
| abstract_inverted_index.up | 18 |
| abstract_inverted_index.0.8 | 131 |
| abstract_inverted_index.0° | 182 |
| abstract_inverted_index.1.3 | 235, 276 |
| abstract_inverted_index.1.5 | 95 |
| abstract_inverted_index.The | 121, 157, 190, 231, 271 |
| abstract_inverted_index.all | 176, 250 |
| abstract_inverted_index.and | 28, 104, 128, 147, 172, 221, 227, 241, 265 |
| abstract_inverted_index.but | 183 |
| abstract_inverted_index.for | 79, 119, 224 |
| abstract_inverted_index.mm, | 277 |
| abstract_inverted_index.the | 39, 48, 144, 151, 198, 208, 215, 225 |
| abstract_inverted_index.vs. | 94, 102, 108 |
| abstract_inverted_index.was | 77, 194 |
| abstract_inverted_index.(1.3 | 92 |
| abstract_inverted_index.0.90 | 222 |
| abstract_inverted_index.0.92 | 219 |
| abstract_inverted_index.0°, | 202 |
| abstract_inverted_index.1.32 | 205 |
| abstract_inverted_index.1.46 | 195 |
| abstract_inverted_index.15° | 212 |
| abstract_inverted_index.22° | 242 |
| abstract_inverted_index.This | 34 |
| abstract_inverted_index.VALS | 64 |
| abstract_inverted_index.aims | 36 |
| abstract_inverted_index.both | 170 |
| abstract_inverted_index.cone | 105, 243, 266 |
| abstract_inverted_index.data | 32 |
| abstract_inverted_index.each | 254 |
| abstract_inverted_index.head | 53 |
| abstract_inverted_index.hole | 44, 84, 233, 259 |
| abstract_inverted_index.mm), | 96 |
| abstract_inverted_index.mode | 149 |
| abstract_inverted_index.size | 91 |
| abstract_inverted_index.slot | 90, 261 |
| abstract_inverted_index.some | 14 |
| abstract_inverted_index.such | 24 |
| abstract_inverted_index.than | 249 |
| abstract_inverted_index.were | 86, 117, 133, 154, 218 |
| abstract_inverted_index.with | 13, 73, 165, 175, 204, 234 |
| abstract_inverted_index.(20° | 107 |
| abstract_inverted_index.15°. | 20, 189 |
| abstract_inverted_index.22°) | 278 |
| abstract_inverted_index.Plate | 258 |
| abstract_inverted_index.angle | 106 |
| abstract_inverted_index.based | 88 |
| abstract_inverted_index.below | 185 |
| abstract_inverted_index.eight | 113 |
| abstract_inverted_index.offer | 4 |
| abstract_inverted_index.other | 251 |
| abstract_inverted_index.plate | 43, 232 |
| abstract_inverted_index.screw | 11, 26, 57, 167, 213 |
| abstract_inverted_index.size, | 262 |
| abstract_inverted_index.slot, | 237 |
| abstract_inverted_index.study | 35 |
| abstract_inverted_index.test. | 139 |
| abstract_inverted_index.three | 238 |
| abstract_inverted_index.total | 111 |
| abstract_inverted_index.under | 55 |
| abstract_inverted_index.(three | 101 |
| abstract_inverted_index.22°). | 109 |
| abstract_inverted_index.column | 240 |
| abstract_inverted_index.design | 45, 85, 115, 200, 244, 273 |
| abstract_inverted_index.device | 284 |
| abstract_inverted_index.four), | 103 |
| abstract_inverted_index.groups | 116, 177 |
| abstract_inverted_index.higher | 246 |
| abstract_inverted_index.impact | 40 |
| abstract_inverted_index.locked | 129 |
| abstract_inverted_index.moment | 142, 193, 248 |
| abstract_inverted_index.number | 97 |
| abstract_inverted_index.offers | 279 |
| abstract_inverted_index.showed | 245 |
| abstract_inverted_index.slots, | 275 |
| abstract_inverted_index.system | 72 |
| abstract_inverted_index.thread | 99, 239, 263 |
| abstract_inverted_index.three- | 171 |
| abstract_inverted_index.Methods | 69 |
| abstract_inverted_index.Results | 156 |
| abstract_inverted_index.angles, | 59 |
| abstract_inverted_index.angles. | 256 |
| abstract_inverted_index.bending | 141, 163, 192, 247 |
| abstract_inverted_index.columns | 100 |
| abstract_inverted_index.design. | 210 |
| abstract_inverted_index.designs | 15, 252 |
| abstract_inverted_index.failure | 148 |
| abstract_inverted_index.falling | 184 |
| abstract_inverted_index.guiding | 283 |
| abstract_inverted_index.highest | 191, 216 |
| abstract_inverted_index.locking | 2, 49, 71, 83, 152, 269 |
| abstract_inverted_index.moments | 217 |
| abstract_inverted_index.number, | 264 |
| abstract_inverted_index.optimal | 272 |
| abstract_inverted_index.results | 158 |
| abstract_inverted_index.screws, | 122 |
| abstract_inverted_index.systems | 3 |
| abstract_inverted_index.various | 56 |
| abstract_inverted_index.However, | 21 |
| abstract_inverted_index.Ultimate | 140 |
| abstract_inverted_index.allowing | 16 |
| abstract_inverted_index.clinical | 22 |
| abstract_inverted_index.compared | 203 |
| abstract_inverted_index.decrease | 161 |
| abstract_inverted_index.designed | 78 |
| abstract_inverted_index.designs, | 174, 229 |
| abstract_inverted_index.distinct | 114 |
| abstract_inverted_index.evaluate | 38 |
| abstract_inverted_index.fracture | 67 |
| abstract_inverted_index.included | 118 |
| abstract_inverted_index.inserted | 123 |
| abstract_inverted_index.insights | 61 |
| abstract_inverted_index.off-axis | 10 |
| abstract_inverted_index.optimize | 63 |
| abstract_inverted_index.persist. | 33 |
| abstract_inverted_index.strength | 50, 164 |
| abstract_inverted_index.superior | 280 |
| abstract_inverted_index.surgical | 6 |
| abstract_inverted_index.Thread-In | 75 |
| abstract_inverted_index.analysis. | 120 |
| abstract_inverted_index.different | 42, 125 |
| abstract_inverted_index.evaluated | 87 |
| abstract_inverted_index.exceeding | 178 |
| abstract_inverted_index.exhibited | 159 |
| abstract_inverted_index.fixation. | 68 |
| abstract_inverted_index.increased | 5 |
| abstract_inverted_index.insertion | 58, 255 |
| abstract_inverted_index.interface | 54, 146 |
| abstract_inverted_index.loosening | 27 |
| abstract_inverted_index.mechanism | 76, 153 |
| abstract_inverted_index.providing | 60 |
| abstract_inverted_index.stability | 31 |
| abstract_inverted_index.strength. | 270 |
| abstract_inverted_index.subjected | 134 |
| abstract_inverted_index.Discussion | 257 |
| abstract_inverted_index.Variations | 81 |
| abstract_inverted_index.angulation | 17, 168 |
| abstract_inverted_index.cantilever | 137 |
| abstract_inverted_index.challenges | 23 |
| abstract_inverted_index.increasing | 166 |
| abstract_inverted_index.influences | 268 |
| abstract_inverted_index.insertion, | 12 |
| abstract_inverted_index.mechanical | 30, 281 |
| abstract_inverted_index.parameters | 46 |
| abstract_inverted_index.permitting | 9 |
| abstract_inverted_index.screw-head | 145 |
| abstract_inverted_index.stability, | 282 |
| abstract_inverted_index.angulation, | 214 |
| abstract_inverted_index.determined. | 155 |
| abstract_inverted_index.flexibility | 7 |
| abstract_inverted_index.four-thread | 173, 228 |
| abstract_inverted_index.performance | 65 |
| abstract_inverted_index.plate-screw | 52 |
| abstract_inverted_index.Introduction | 0 |
| abstract_inverted_index.inclinations | 126 |
| abstract_inverted_index.insufficient | 29 |
| abstract_inverted_index.three-thread | 226 |
| abstract_inverted_index.(0°–15°), | 127 |
| abstract_inverted_index.Point-Loading | 74 |
| abstract_inverted_index.optimization. | 285 |
| abstract_inverted_index.respectively. | 230 |
| abstract_inverted_index.Variable-angle | 1, 70 |
| abstract_inverted_index.investigation. | 80 |
| abstract_inverted_index.load-to-failure | 138 |
| abstract_inverted_index.four-thread-column | 209 |
| abstract_inverted_index.three-thread-column | 199 |
| abstract_inverted_index.angle—significantly | 267 |
| abstract_inverted_index.design—specifically | 260 |
| cited_by_percentile_year | |
| corresponding_author_ids | https://openalex.org/A5045250992 |
| countries_distinct_count | 1 |
| institutions_distinct_count | 4 |
| corresponding_institution_ids | https://openalex.org/I162838928, https://openalex.org/I4210124028 |
| citation_normalized_percentile |