Modelling the Flow Behaviour of Al Alloy Sheets at Elevated Temperatures Using a Modified Zerilli–Armstrong Model and Phenomenological-Based Constitutive Models Article Swipe
Ali Abd El-Aty
,
Yong Xu
,
Yong Hou
,
Shihong Zhang
,
Sangyul Ha
,
Liangliang Xia
,
Bandar Alzahrani
,
Alamry Ali
,
Mohamed M. Z. Ahmed
,
Abdallah Shokry
·
YOU?
·
· 2024
· Open Access
·
· DOI: https://doi.org/10.3390/ma17071584
YOU?
·
· 2024
· Open Access
·
· DOI: https://doi.org/10.3390/ma17071584
The flow behaviour of AA2060 Al alloy under warm/hot deformation conditions is complicated because of its dependency on strain rates (ε˙), strain (ε), and deformation modes. Thus, it is crucial to reveal and predict the flow behaviours of this alloy at a wide range of temperatures (T) and ε˙ using different constitutive models. Firstly, the isothermal tensile tests were carried out via a Gleeble-3800 thermomechanical simulator at a T range of 100, 200, 300, 400, and 500 °C and ε˙ range of 0.01, 0.1, 1, and 10 s−1 to reveal the warm/hot flow behaviours of AA2060 alloy sheet. Consequently, three phenomenological-based constitutive models (L-MJC, S1-MJC, S2-MJC) and a modified Zerilli–Armstrong (MZA) model representing physically based constitutive models were developed to precisely predict the flow behaviour of AA2060 alloy sheet under a wide range of T and ε˙. The predictability of the developed constitutive models was assessed and compared using various statistical parameters, including the correlation coefficient (R), average absolute relative error (AARE), and root mean square error (RMSE). By comparing the results determined from these models and those obtained from experimentations, and confirmed by R, AARE, and RMSE values, it is concluded that the predicted stresses determined from the S2-MJC model align closely with the experimental stresses, demonstrating a remarkable fit compared to the S1-MJC, L-MJC, and MZA models. This is because of the linking impact between softening, the strain rate, and strain hardening in the S2-MJC model. It is widely known that the dislocation process is affected by softening and strain rates. This is attributed to the interactions that occurred between ε and ε˙ from one side and between ε, ε˙, and T from the other side using an extensive set of constants correlating the constitutive components of dynamic recovery and softening mechanisms.
Related Topics
Concepts
Metadata
- Type
- article
- Language
- en
- Landing Page
- https://doi.org/10.3390/ma17071584
- https://www.mdpi.com/1996-1944/17/7/1584/pdf?version=1711732231
- OA Status
- gold
- Cited By
- 6
- References
- 56
- Related Works
- 10
- OpenAlex ID
- https://openalex.org/W4393356781
All OpenAlex metadata
Raw OpenAlex JSON
- OpenAlex ID
-
https://openalex.org/W4393356781Canonical identifier for this work in OpenAlex
- DOI
-
https://doi.org/10.3390/ma17071584Digital Object Identifier
- Title
-
Modelling the Flow Behaviour of Al Alloy Sheets at Elevated Temperatures Using a Modified Zerilli–Armstrong Model and Phenomenological-Based Constitutive ModelsWork title
- Type
-
articleOpenAlex work type
- Language
-
enPrimary language
- Publication year
-
2024Year of publication
- Publication date
-
2024-03-29Full publication date if available
- Authors
-
Ali Abd El-Aty, Yong Xu, Yong Hou, Shihong Zhang, Sangyul Ha, Liangliang Xia, Bandar Alzahrani, Alamry Ali, Mohamed M. Z. Ahmed, Abdallah ShokryList of authors in order
- Landing page
-
https://doi.org/10.3390/ma17071584Publisher landing page
- PDF URL
-
https://www.mdpi.com/1996-1944/17/7/1584/pdf?version=1711732231Direct link to full text PDF
- Open access
-
YesWhether a free full text is available
- OA status
-
goldOpen access status per OpenAlex
- OA URL
-
https://www.mdpi.com/1996-1944/17/7/1584/pdf?version=1711732231Direct OA link when available
- Concepts
-
Constitutive equation, Materials science, Flow stress, Strain rate, Isothermal process, Alloy, Deformation (meteorology), Phenomenological model, Thermodynamics, Hardening (computing), Mechanics, Composite material, Mathematics, Statistics, Physics, Finite element method, Layer (electronics)Top concepts (fields/topics) attached by OpenAlex
- Cited by
-
6Total citation count in OpenAlex
- Citations by year (recent)
-
2025: 3, 2024: 3Per-year citation counts (last 5 years)
- References (count)
-
56Number of works referenced by this work
- Related works (count)
-
10Other works algorithmically related by OpenAlex
Full payload
| id | https://openalex.org/W4393356781 |
|---|---|
| doi | https://doi.org/10.3390/ma17071584 |
| ids.doi | https://doi.org/10.3390/ma17071584 |
| ids.pmid | https://pubmed.ncbi.nlm.nih.gov/38612098 |
| ids.openalex | https://openalex.org/W4393356781 |
| fwci | 2.99898152 |
| type | article |
| title | Modelling the Flow Behaviour of Al Alloy Sheets at Elevated Temperatures Using a Modified Zerilli–Armstrong Model and Phenomenological-Based Constitutive Models |
| biblio.issue | 7 |
| biblio.volume | 17 |
| biblio.last_page | 1584 |
| biblio.first_page | 1584 |
| topics[0].id | https://openalex.org/T11201 |
| topics[0].field.id | https://openalex.org/fields/22 |
| topics[0].field.display_name | Engineering |
| topics[0].score | 0.9998999834060669 |
| topics[0].domain.id | https://openalex.org/domains/3 |
| topics[0].domain.display_name | Physical Sciences |
| topics[0].subfield.id | https://openalex.org/subfields/2211 |
| topics[0].subfield.display_name | Mechanics of Materials |
| topics[0].display_name | Metallurgy and Material Forming |
| topics[1].id | https://openalex.org/T10700 |
| topics[1].field.id | https://openalex.org/fields/22 |
| topics[1].field.display_name | Engineering |
| topics[1].score | 0.9991999864578247 |
| topics[1].domain.id | https://openalex.org/domains/3 |
| topics[1].domain.display_name | Physical Sciences |
| topics[1].subfield.id | https://openalex.org/subfields/2210 |
| topics[1].subfield.display_name | Mechanical Engineering |
| topics[1].display_name | Metal Forming Simulation Techniques |
| topics[2].id | https://openalex.org/T10204 |
| topics[2].field.id | https://openalex.org/fields/25 |
| topics[2].field.display_name | Materials Science |
| topics[2].score | 0.9984999895095825 |
| topics[2].domain.id | https://openalex.org/domains/3 |
| topics[2].domain.display_name | Physical Sciences |
| topics[2].subfield.id | https://openalex.org/subfields/2505 |
| topics[2].subfield.display_name | Materials Chemistry |
| topics[2].display_name | Microstructure and mechanical properties |
| is_xpac | False |
| apc_list.value | 2300 |
| apc_list.currency | CHF |
| apc_list.value_usd | 2490 |
| apc_paid.value | 2300 |
| apc_paid.currency | CHF |
| apc_paid.value_usd | 2490 |
| concepts[0].id | https://openalex.org/C202973686 |
| concepts[0].level | 3 |
| concepts[0].score | 0.7478600740432739 |
| concepts[0].wikidata | https://www.wikidata.org/wiki/Q1937401 |
| concepts[0].display_name | Constitutive equation |
| concepts[1].id | https://openalex.org/C192562407 |
| concepts[1].level | 0 |
| concepts[1].score | 0.7158224582672119 |
| concepts[1].wikidata | https://www.wikidata.org/wiki/Q228736 |
| concepts[1].display_name | Materials science |
| concepts[2].id | https://openalex.org/C162611839 |
| concepts[2].level | 3 |
| concepts[2].score | 0.5996295809745789 |
| concepts[2].wikidata | https://www.wikidata.org/wiki/Q912214 |
| concepts[2].display_name | Flow stress |
| concepts[3].id | https://openalex.org/C149342994 |
| concepts[3].level | 2 |
| concepts[3].score | 0.5510882139205933 |
| concepts[3].wikidata | https://www.wikidata.org/wiki/Q3181055 |
| concepts[3].display_name | Strain rate |
| concepts[4].id | https://openalex.org/C133347239 |
| concepts[4].level | 2 |
| concepts[4].score | 0.5090643763542175 |
| concepts[4].wikidata | https://www.wikidata.org/wiki/Q486921 |
| concepts[4].display_name | Isothermal process |
| concepts[5].id | https://openalex.org/C2780026712 |
| concepts[5].level | 2 |
| concepts[5].score | 0.5078278183937073 |
| concepts[5].wikidata | https://www.wikidata.org/wiki/Q37756 |
| concepts[5].display_name | Alloy |
| concepts[6].id | https://openalex.org/C204366326 |
| concepts[6].level | 2 |
| concepts[6].score | 0.4701041579246521 |
| concepts[6].wikidata | https://www.wikidata.org/wiki/Q3027650 |
| concepts[6].display_name | Deformation (meteorology) |
| concepts[7].id | https://openalex.org/C2779569378 |
| concepts[7].level | 2 |
| concepts[7].score | 0.4307243824005127 |
| concepts[7].wikidata | https://www.wikidata.org/wiki/Q25303768 |
| concepts[7].display_name | Phenomenological model |
| concepts[8].id | https://openalex.org/C97355855 |
| concepts[8].level | 1 |
| concepts[8].score | 0.4203539490699768 |
| concepts[8].wikidata | https://www.wikidata.org/wiki/Q11473 |
| concepts[8].display_name | Thermodynamics |
| concepts[9].id | https://openalex.org/C44255700 |
| concepts[9].level | 3 |
| concepts[9].score | 0.41894251108169556 |
| concepts[9].wikidata | https://www.wikidata.org/wiki/Q978423 |
| concepts[9].display_name | Hardening (computing) |
| concepts[10].id | https://openalex.org/C57879066 |
| concepts[10].level | 1 |
| concepts[10].score | 0.347199410200119 |
| concepts[10].wikidata | https://www.wikidata.org/wiki/Q41217 |
| concepts[10].display_name | Mechanics |
| concepts[11].id | https://openalex.org/C159985019 |
| concepts[11].level | 1 |
| concepts[11].score | 0.30728617310523987 |
| concepts[11].wikidata | https://www.wikidata.org/wiki/Q181790 |
| concepts[11].display_name | Composite material |
| concepts[12].id | https://openalex.org/C33923547 |
| concepts[12].level | 0 |
| concepts[12].score | 0.19672778248786926 |
| concepts[12].wikidata | https://www.wikidata.org/wiki/Q395 |
| concepts[12].display_name | Mathematics |
| concepts[13].id | https://openalex.org/C105795698 |
| concepts[13].level | 1 |
| concepts[13].score | 0.15854522585868835 |
| concepts[13].wikidata | https://www.wikidata.org/wiki/Q12483 |
| concepts[13].display_name | Statistics |
| concepts[14].id | https://openalex.org/C121332964 |
| concepts[14].level | 0 |
| concepts[14].score | 0.11896124482154846 |
| concepts[14].wikidata | https://www.wikidata.org/wiki/Q413 |
| concepts[14].display_name | Physics |
| concepts[15].id | https://openalex.org/C135628077 |
| concepts[15].level | 2 |
| concepts[15].score | 0.11707112193107605 |
| concepts[15].wikidata | https://www.wikidata.org/wiki/Q220184 |
| concepts[15].display_name | Finite element method |
| concepts[16].id | https://openalex.org/C2779227376 |
| concepts[16].level | 2 |
| concepts[16].score | 0.0 |
| concepts[16].wikidata | https://www.wikidata.org/wiki/Q6505497 |
| concepts[16].display_name | Layer (electronics) |
| keywords[0].id | https://openalex.org/keywords/constitutive-equation |
| keywords[0].score | 0.7478600740432739 |
| keywords[0].display_name | Constitutive equation |
| keywords[1].id | https://openalex.org/keywords/materials-science |
| keywords[1].score | 0.7158224582672119 |
| keywords[1].display_name | Materials science |
| keywords[2].id | https://openalex.org/keywords/flow-stress |
| keywords[2].score | 0.5996295809745789 |
| keywords[2].display_name | Flow stress |
| keywords[3].id | https://openalex.org/keywords/strain-rate |
| keywords[3].score | 0.5510882139205933 |
| keywords[3].display_name | Strain rate |
| keywords[4].id | https://openalex.org/keywords/isothermal-process |
| keywords[4].score | 0.5090643763542175 |
| keywords[4].display_name | Isothermal process |
| keywords[5].id | https://openalex.org/keywords/alloy |
| keywords[5].score | 0.5078278183937073 |
| keywords[5].display_name | Alloy |
| keywords[6].id | https://openalex.org/keywords/deformation |
| keywords[6].score | 0.4701041579246521 |
| keywords[6].display_name | Deformation (meteorology) |
| keywords[7].id | https://openalex.org/keywords/phenomenological-model |
| keywords[7].score | 0.4307243824005127 |
| keywords[7].display_name | Phenomenological model |
| keywords[8].id | https://openalex.org/keywords/thermodynamics |
| keywords[8].score | 0.4203539490699768 |
| keywords[8].display_name | Thermodynamics |
| keywords[9].id | https://openalex.org/keywords/hardening |
| keywords[9].score | 0.41894251108169556 |
| keywords[9].display_name | Hardening (computing) |
| keywords[10].id | https://openalex.org/keywords/mechanics |
| keywords[10].score | 0.347199410200119 |
| keywords[10].display_name | Mechanics |
| keywords[11].id | https://openalex.org/keywords/composite-material |
| keywords[11].score | 0.30728617310523987 |
| keywords[11].display_name | Composite material |
| keywords[12].id | https://openalex.org/keywords/mathematics |
| keywords[12].score | 0.19672778248786926 |
| keywords[12].display_name | Mathematics |
| keywords[13].id | https://openalex.org/keywords/statistics |
| keywords[13].score | 0.15854522585868835 |
| keywords[13].display_name | Statistics |
| keywords[14].id | https://openalex.org/keywords/physics |
| keywords[14].score | 0.11896124482154846 |
| keywords[14].display_name | Physics |
| keywords[15].id | https://openalex.org/keywords/finite-element-method |
| keywords[15].score | 0.11707112193107605 |
| keywords[15].display_name | Finite element method |
| language | en |
| locations[0].id | doi:10.3390/ma17071584 |
| locations[0].is_oa | True |
| locations[0].source.id | https://openalex.org/S18714766 |
| locations[0].source.issn | 1996-1944 |
| locations[0].source.type | journal |
| locations[0].source.is_oa | True |
| locations[0].source.issn_l | 1996-1944 |
| locations[0].source.is_core | True |
| locations[0].source.is_in_doaj | False |
| locations[0].source.display_name | Materials |
| locations[0].source.host_organization | https://openalex.org/P4310310987 |
| locations[0].source.host_organization_name | Multidisciplinary Digital Publishing Institute |
| locations[0].source.host_organization_lineage | https://openalex.org/P4310310987 |
| locations[0].license | cc-by |
| locations[0].pdf_url | https://www.mdpi.com/1996-1944/17/7/1584/pdf?version=1711732231 |
| locations[0].version | publishedVersion |
| locations[0].raw_type | journal-article |
| locations[0].license_id | https://openalex.org/licenses/cc-by |
| locations[0].is_accepted | True |
| locations[0].is_published | True |
| locations[0].raw_source_name | Materials |
| locations[0].landing_page_url | https://doi.org/10.3390/ma17071584 |
| locations[1].id | pmid:38612098 |
| locations[1].is_oa | False |
| locations[1].source.id | https://openalex.org/S4306525036 |
| locations[1].source.issn | |
| locations[1].source.type | repository |
| locations[1].source.is_oa | False |
| locations[1].source.issn_l | |
| locations[1].source.is_core | False |
| locations[1].source.is_in_doaj | False |
| locations[1].source.display_name | PubMed |
| locations[1].source.host_organization | https://openalex.org/I1299303238 |
| locations[1].source.host_organization_name | National Institutes of Health |
| locations[1].source.host_organization_lineage | https://openalex.org/I1299303238 |
| locations[1].license | |
| locations[1].pdf_url | |
| locations[1].version | publishedVersion |
| locations[1].raw_type | |
| locations[1].license_id | |
| locations[1].is_accepted | True |
| locations[1].is_published | True |
| locations[1].raw_source_name | Materials (Basel, Switzerland) |
| locations[1].landing_page_url | https://pubmed.ncbi.nlm.nih.gov/38612098 |
| locations[2].id | pmh:oai:doaj.org/article:12f9e8aea07b4af0b6f34cf1972ce959 |
| locations[2].is_oa | False |
| locations[2].source.id | https://openalex.org/S4306401280 |
| locations[2].source.issn | |
| locations[2].source.type | repository |
| locations[2].source.is_oa | False |
| locations[2].source.issn_l | |
| locations[2].source.is_core | False |
| locations[2].source.is_in_doaj | False |
| locations[2].source.display_name | DOAJ (DOAJ: Directory of Open Access Journals) |
| locations[2].source.host_organization | |
| locations[2].source.host_organization_name | |
| locations[2].source.host_organization_lineage | |
| locations[2].license | |
| locations[2].pdf_url | |
| locations[2].version | submittedVersion |
| locations[2].raw_type | article |
| locations[2].license_id | |
| locations[2].is_accepted | False |
| locations[2].is_published | False |
| locations[2].raw_source_name | Materials, Vol 17, Iss 7, p 1584 (2024) |
| locations[2].landing_page_url | https://doaj.org/article/12f9e8aea07b4af0b6f34cf1972ce959 |
| locations[3].id | pmh:oai:pubmedcentral.nih.gov:11012879 |
| locations[3].is_oa | True |
| locations[3].source.id | https://openalex.org/S2764455111 |
| locations[3].source.issn | |
| locations[3].source.type | repository |
| locations[3].source.is_oa | False |
| locations[3].source.issn_l | |
| locations[3].source.is_core | False |
| locations[3].source.is_in_doaj | False |
| locations[3].source.display_name | PubMed Central |
| locations[3].source.host_organization | https://openalex.org/I1299303238 |
| locations[3].source.host_organization_name | National Institutes of Health |
| locations[3].source.host_organization_lineage | https://openalex.org/I1299303238 |
| locations[3].license | other-oa |
| locations[3].pdf_url | |
| locations[3].version | submittedVersion |
| locations[3].raw_type | Text |
| locations[3].license_id | https://openalex.org/licenses/other-oa |
| locations[3].is_accepted | False |
| locations[3].is_published | False |
| locations[3].raw_source_name | Materials (Basel) |
| locations[3].landing_page_url | https://www.ncbi.nlm.nih.gov/pmc/articles/11012879 |
| indexed_in | crossref, doaj, pubmed |
| authorships[0].author.id | https://openalex.org/A5079720111 |
| authorships[0].author.orcid | https://orcid.org/0000-0002-1999-7475 |
| authorships[0].author.display_name | Ali Abd El-Aty |
| authorships[0].countries | EG, SA |
| authorships[0].affiliations[0].institution_ids | https://openalex.org/I142608572 |
| authorships[0].affiliations[0].raw_affiliation_string | Department of Mechanical Engineering, College of Engineering at Al Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia |
| authorships[0].affiliations[1].institution_ids | https://openalex.org/I84058292 |
| authorships[0].affiliations[1].raw_affiliation_string | Mechanical Engineering Department, Faculty of Engineering, Helwan University, Cairo 11795, Egypt |
| authorships[0].institutions[0].id | https://openalex.org/I84058292 |
| authorships[0].institutions[0].ror | https://ror.org/00h55v928 |
| authorships[0].institutions[0].type | education |
| authorships[0].institutions[0].lineage | https://openalex.org/I84058292 |
| authorships[0].institutions[0].country_code | EG |
| authorships[0].institutions[0].display_name | Helwan University |
| authorships[0].institutions[1].id | https://openalex.org/I142608572 |
| authorships[0].institutions[1].ror | https://ror.org/04jt46d36 |
| authorships[0].institutions[1].type | education |
| authorships[0].institutions[1].lineage | https://openalex.org/I142608572 |
| authorships[0].institutions[1].country_code | SA |
| authorships[0].institutions[1].display_name | Prince Sattam Bin Abdulaziz University |
| authorships[0].author_position | first |
| authorships[0].raw_author_name | Ali Abd El-Aty |
| authorships[0].is_corresponding | True |
| authorships[0].raw_affiliation_strings | Department of Mechanical Engineering, College of Engineering at Al Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia, Mechanical Engineering Department, Faculty of Engineering, Helwan University, Cairo 11795, Egypt |
| authorships[1].author.id | https://openalex.org/A5101885292 |
| authorships[1].author.orcid | https://orcid.org/0000-0002-8254-7004 |
| authorships[1].author.display_name | Yong Xu |
| authorships[1].countries | CN |
| authorships[1].affiliations[0].institution_ids | https://openalex.org/I19820366 |
| authorships[1].affiliations[0].raw_affiliation_string | Shi-Changxu Innovation Center for Advanced Materials, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China |
| authorships[1].institutions[0].id | https://openalex.org/I19820366 |
| authorships[1].institutions[0].ror | https://ror.org/034t30j35 |
| authorships[1].institutions[0].type | government |
| authorships[1].institutions[0].lineage | https://openalex.org/I19820366 |
| authorships[1].institutions[0].country_code | CN |
| authorships[1].institutions[0].display_name | Chinese Academy of Sciences |
| authorships[1].author_position | middle |
| authorships[1].raw_author_name | Yong Xu |
| authorships[1].is_corresponding | False |
| authorships[1].raw_affiliation_strings | Shi-Changxu Innovation Center for Advanced Materials, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China |
| authorships[2].author.id | https://openalex.org/A5066664870 |
| authorships[2].author.orcid | https://orcid.org/0000-0003-1820-2156 |
| authorships[2].author.display_name | Yong Hou |
| authorships[2].countries | KR |
| authorships[2].affiliations[0].institution_ids | https://openalex.org/I139264467 |
| authorships[2].affiliations[0].raw_affiliation_string | Department of Materials Science and Engineering & RIAM, Seoul National University, Seoul 08826, Republic of Korea |
| authorships[2].institutions[0].id | https://openalex.org/I139264467 |
| authorships[2].institutions[0].ror | https://ror.org/04h9pn542 |
| authorships[2].institutions[0].type | education |
| authorships[2].institutions[0].lineage | https://openalex.org/I139264467 |
| authorships[2].institutions[0].country_code | KR |
| authorships[2].institutions[0].display_name | Seoul National University |
| authorships[2].author_position | middle |
| authorships[2].raw_author_name | Yong Hou |
| authorships[2].is_corresponding | False |
| authorships[2].raw_affiliation_strings | Department of Materials Science and Engineering & RIAM, Seoul National University, Seoul 08826, Republic of Korea |
| authorships[3].author.id | https://openalex.org/A5053988912 |
| authorships[3].author.orcid | https://orcid.org/0000-0002-8074-1874 |
| authorships[3].author.display_name | Shihong Zhang |
| authorships[3].countries | CN |
| authorships[3].affiliations[0].institution_ids | https://openalex.org/I19820366 |
| authorships[3].affiliations[0].raw_affiliation_string | Shi-Changxu Innovation Center for Advanced Materials, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China |
| authorships[3].institutions[0].id | https://openalex.org/I19820366 |
| authorships[3].institutions[0].ror | https://ror.org/034t30j35 |
| authorships[3].institutions[0].type | government |
| authorships[3].institutions[0].lineage | https://openalex.org/I19820366 |
| authorships[3].institutions[0].country_code | CN |
| authorships[3].institutions[0].display_name | Chinese Academy of Sciences |
| authorships[3].author_position | middle |
| authorships[3].raw_author_name | Shi-Hong Zhang |
| authorships[3].is_corresponding | False |
| authorships[3].raw_affiliation_strings | Shi-Changxu Innovation Center for Advanced Materials, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China |
| authorships[4].author.id | https://openalex.org/A5101421547 |
| authorships[4].author.orcid | https://orcid.org/0000-0002-0939-3838 |
| authorships[4].author.display_name | Sangyul Ha |
| authorships[4].countries | KR |
| authorships[4].affiliations[0].institution_ids | https://openalex.org/I89440247 |
| authorships[4].affiliations[0].raw_affiliation_string | Department of Semiconductor Engineering, Myongji University, Yongin 17058, Republic of Korea |
| authorships[4].institutions[0].id | https://openalex.org/I89440247 |
| authorships[4].institutions[0].ror | https://ror.org/00s9dpb54 |
| authorships[4].institutions[0].type | education |
| authorships[4].institutions[0].lineage | https://openalex.org/I89440247 |
| authorships[4].institutions[0].country_code | KR |
| authorships[4].institutions[0].display_name | Myongji University |
| authorships[4].author_position | middle |
| authorships[4].raw_author_name | Sangyul Ha |
| authorships[4].is_corresponding | False |
| authorships[4].raw_affiliation_strings | Department of Semiconductor Engineering, Myongji University, Yongin 17058, Republic of Korea |
| authorships[5].author.id | https://openalex.org/A5039355159 |
| authorships[5].author.orcid | https://orcid.org/0000-0001-7076-141X |
| authorships[5].author.display_name | Liangliang Xia |
| authorships[5].countries | CN |
| authorships[5].affiliations[0].institution_ids | https://openalex.org/I182707071 |
| authorships[5].affiliations[0].raw_affiliation_string | School of Transportation, Ludong University, Yantai 264025, China |
| authorships[5].institutions[0].id | https://openalex.org/I182707071 |
| authorships[5].institutions[0].ror | https://ror.org/028h95t32 |
| authorships[5].institutions[0].type | education |
| authorships[5].institutions[0].lineage | https://openalex.org/I182707071 |
| authorships[5].institutions[0].country_code | CN |
| authorships[5].institutions[0].display_name | Ludong University |
| authorships[5].author_position | middle |
| authorships[5].raw_author_name | Liangliang Xia |
| authorships[5].is_corresponding | False |
| authorships[5].raw_affiliation_strings | School of Transportation, Ludong University, Yantai 264025, China |
| authorships[6].author.id | https://openalex.org/A5056573273 |
| authorships[6].author.orcid | https://orcid.org/0000-0003-3095-3403 |
| authorships[6].author.display_name | Bandar Alzahrani |
| authorships[6].countries | SA |
| authorships[6].affiliations[0].institution_ids | https://openalex.org/I142608572 |
| authorships[6].affiliations[0].raw_affiliation_string | Department of Mechanical Engineering, College of Engineering at Al Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia |
| authorships[6].institutions[0].id | https://openalex.org/I142608572 |
| authorships[6].institutions[0].ror | https://ror.org/04jt46d36 |
| authorships[6].institutions[0].type | education |
| authorships[6].institutions[0].lineage | https://openalex.org/I142608572 |
| authorships[6].institutions[0].country_code | SA |
| authorships[6].institutions[0].display_name | Prince Sattam Bin Abdulaziz University |
| authorships[6].author_position | middle |
| authorships[6].raw_author_name | Bandar Alzahrani |
| authorships[6].is_corresponding | False |
| authorships[6].raw_affiliation_strings | Department of Mechanical Engineering, College of Engineering at Al Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia |
| authorships[7].author.id | https://openalex.org/A5056518629 |
| authorships[7].author.orcid | |
| authorships[7].author.display_name | Alamry Ali |
| authorships[7].countries | SA |
| authorships[7].affiliations[0].institution_ids | https://openalex.org/I142608572 |
| authorships[7].affiliations[0].raw_affiliation_string | Department of Mechanical Engineering, College of Engineering at Al Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia |
| authorships[7].institutions[0].id | https://openalex.org/I142608572 |
| authorships[7].institutions[0].ror | https://ror.org/04jt46d36 |
| authorships[7].institutions[0].type | education |
| authorships[7].institutions[0].lineage | https://openalex.org/I142608572 |
| authorships[7].institutions[0].country_code | SA |
| authorships[7].institutions[0].display_name | Prince Sattam Bin Abdulaziz University |
| authorships[7].author_position | middle |
| authorships[7].raw_author_name | Alamry Ali |
| authorships[7].is_corresponding | False |
| authorships[7].raw_affiliation_strings | Department of Mechanical Engineering, College of Engineering at Al Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia |
| authorships[8].author.id | https://openalex.org/A5079757915 |
| authorships[8].author.orcid | https://orcid.org/0000-0002-9550-7431 |
| authorships[8].author.display_name | Mohamed M. Z. Ahmed |
| authorships[8].countries | SA |
| authorships[8].affiliations[0].institution_ids | https://openalex.org/I142608572 |
| authorships[8].affiliations[0].raw_affiliation_string | Department of Mechanical Engineering, College of Engineering at Al Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia |
| authorships[8].institutions[0].id | https://openalex.org/I142608572 |
| authorships[8].institutions[0].ror | https://ror.org/04jt46d36 |
| authorships[8].institutions[0].type | education |
| authorships[8].institutions[0].lineage | https://openalex.org/I142608572 |
| authorships[8].institutions[0].country_code | SA |
| authorships[8].institutions[0].display_name | Prince Sattam Bin Abdulaziz University |
| authorships[8].author_position | middle |
| authorships[8].raw_author_name | Mohamed M. Z. Ahmed |
| authorships[8].is_corresponding | False |
| authorships[8].raw_affiliation_strings | Department of Mechanical Engineering, College of Engineering at Al Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia |
| authorships[9].author.id | https://openalex.org/A5089951137 |
| authorships[9].author.orcid | https://orcid.org/0000-0001-9206-288X |
| authorships[9].author.display_name | Abdallah Shokry |
| authorships[9].countries | EG |
| authorships[9].affiliations[0].institution_ids | https://openalex.org/I66513531 |
| authorships[9].affiliations[0].raw_affiliation_string | Department of Mechanical Engineering, Faculty of Engineering, Fayoum University, Fayoum 63514, Egypt |
| authorships[9].institutions[0].id | https://openalex.org/I66513531 |
| authorships[9].institutions[0].ror | https://ror.org/023gzwx10 |
| authorships[9].institutions[0].type | education |
| authorships[9].institutions[0].lineage | https://openalex.org/I66513531 |
| authorships[9].institutions[0].country_code | EG |
| authorships[9].institutions[0].display_name | Fayoum University |
| authorships[9].author_position | last |
| authorships[9].raw_author_name | Abdallah Shokry |
| authorships[9].is_corresponding | False |
| authorships[9].raw_affiliation_strings | Department of Mechanical Engineering, Faculty of Engineering, Fayoum University, Fayoum 63514, Egypt |
| has_content.pdf | True |
| has_content.grobid_xml | True |
| is_paratext | False |
| open_access.is_oa | True |
| open_access.oa_url | https://www.mdpi.com/1996-1944/17/7/1584/pdf?version=1711732231 |
| open_access.oa_status | gold |
| open_access.any_repository_has_fulltext | False |
| created_date | 2024-04-01T00:00:00 |
| display_name | Modelling the Flow Behaviour of Al Alloy Sheets at Elevated Temperatures Using a Modified Zerilli–Armstrong Model and Phenomenological-Based Constitutive Models |
| has_fulltext | True |
| is_retracted | False |
| updated_date | 2025-11-06T03:46:38.306776 |
| primary_topic.id | https://openalex.org/T11201 |
| primary_topic.field.id | https://openalex.org/fields/22 |
| primary_topic.field.display_name | Engineering |
| primary_topic.score | 0.9998999834060669 |
| primary_topic.domain.id | https://openalex.org/domains/3 |
| primary_topic.domain.display_name | Physical Sciences |
| primary_topic.subfield.id | https://openalex.org/subfields/2211 |
| primary_topic.subfield.display_name | Mechanics of Materials |
| primary_topic.display_name | Metallurgy and Material Forming |
| related_works | https://openalex.org/W2388872521, https://openalex.org/W2159581289, https://openalex.org/W2958985340, https://openalex.org/W2794222894, https://openalex.org/W2000044286, https://openalex.org/W2744433168, https://openalex.org/W2362212451, https://openalex.org/W2336385494, https://openalex.org/W2780800405, https://openalex.org/W2349103684 |
| cited_by_count | 6 |
| counts_by_year[0].year | 2025 |
| counts_by_year[0].cited_by_count | 3 |
| counts_by_year[1].year | 2024 |
| counts_by_year[1].cited_by_count | 3 |
| locations_count | 4 |
| best_oa_location.id | doi:10.3390/ma17071584 |
| best_oa_location.is_oa | True |
| best_oa_location.source.id | https://openalex.org/S18714766 |
| best_oa_location.source.issn | 1996-1944 |
| best_oa_location.source.type | journal |
| best_oa_location.source.is_oa | True |
| best_oa_location.source.issn_l | 1996-1944 |
| best_oa_location.source.is_core | True |
| best_oa_location.source.is_in_doaj | False |
| best_oa_location.source.display_name | Materials |
| best_oa_location.source.host_organization | https://openalex.org/P4310310987 |
| best_oa_location.source.host_organization_name | Multidisciplinary Digital Publishing Institute |
| best_oa_location.source.host_organization_lineage | https://openalex.org/P4310310987 |
| best_oa_location.license | cc-by |
| best_oa_location.pdf_url | https://www.mdpi.com/1996-1944/17/7/1584/pdf?version=1711732231 |
| best_oa_location.version | publishedVersion |
| best_oa_location.raw_type | journal-article |
| best_oa_location.license_id | https://openalex.org/licenses/cc-by |
| best_oa_location.is_accepted | True |
| best_oa_location.is_published | True |
| best_oa_location.raw_source_name | Materials |
| best_oa_location.landing_page_url | https://doi.org/10.3390/ma17071584 |
| primary_location.id | doi:10.3390/ma17071584 |
| primary_location.is_oa | True |
| primary_location.source.id | https://openalex.org/S18714766 |
| primary_location.source.issn | 1996-1944 |
| primary_location.source.type | journal |
| primary_location.source.is_oa | True |
| primary_location.source.issn_l | 1996-1944 |
| primary_location.source.is_core | True |
| primary_location.source.is_in_doaj | False |
| primary_location.source.display_name | Materials |
| primary_location.source.host_organization | https://openalex.org/P4310310987 |
| primary_location.source.host_organization_name | Multidisciplinary Digital Publishing Institute |
| primary_location.source.host_organization_lineage | https://openalex.org/P4310310987 |
| primary_location.license | cc-by |
| primary_location.pdf_url | https://www.mdpi.com/1996-1944/17/7/1584/pdf?version=1711732231 |
| primary_location.version | publishedVersion |
| primary_location.raw_type | journal-article |
| primary_location.license_id | https://openalex.org/licenses/cc-by |
| primary_location.is_accepted | True |
| primary_location.is_published | True |
| primary_location.raw_source_name | Materials |
| primary_location.landing_page_url | https://doi.org/10.3390/ma17071584 |
| publication_date | 2024-03-29 |
| publication_year | 2024 |
| referenced_works | https://openalex.org/W2775883390, https://openalex.org/W2108401845, https://openalex.org/W4206668986, https://openalex.org/W3180866400, https://openalex.org/W4316466946, https://openalex.org/W3113881667, https://openalex.org/W2997674407, https://openalex.org/W4223461471, https://openalex.org/W4285175003, https://openalex.org/W3199244783, https://openalex.org/W3027090556, https://openalex.org/W6749921081, https://openalex.org/W2086351393, https://openalex.org/W789756705, https://openalex.org/W6691842195, https://openalex.org/W2013367503, https://openalex.org/W2036928440, https://openalex.org/W2063015358, https://openalex.org/W2018272180, https://openalex.org/W2035952529, https://openalex.org/W2050939831, https://openalex.org/W2151540541, https://openalex.org/W2061232593, https://openalex.org/W1970859040, https://openalex.org/W2048946918, https://openalex.org/W1990887343, https://openalex.org/W2739873198, https://openalex.org/W2899905229, https://openalex.org/W2011619990, https://openalex.org/W2013520651, https://openalex.org/W2023751847, https://openalex.org/W2031766266, https://openalex.org/W2013942344, https://openalex.org/W2080123636, https://openalex.org/W2017776147, https://openalex.org/W1974214824, https://openalex.org/W4293340218, https://openalex.org/W4320731616, https://openalex.org/W6776682906, https://openalex.org/W3163392412, https://openalex.org/W2025479966, https://openalex.org/W4223952310, https://openalex.org/W4283078242, https://openalex.org/W2398092850, https://openalex.org/W2954801554, https://openalex.org/W3202305162, https://openalex.org/W3110561130, https://openalex.org/W2086827153, https://openalex.org/W2059671797, https://openalex.org/W2770996902, https://openalex.org/W3150138870, https://openalex.org/W4383272341, https://openalex.org/W4392301804, https://openalex.org/W2255576175, https://openalex.org/W3020675723, https://openalex.org/W2795543171 |
| referenced_works_count | 56 |
| abstract_inverted_index.T | 68, 134, 273 |
| abstract_inverted_index.a | 41, 62, 67, 107, 130, 208 |
| abstract_inverted_index.1, | 84 |
| abstract_inverted_index.10 | 86 |
| abstract_inverted_index.Al | 5 |
| abstract_inverted_index.By | 168 |
| abstract_inverted_index.It | 238 |
| abstract_inverted_index.R, | 184 |
| abstract_inverted_index.an | 279 |
| abstract_inverted_index.at | 40, 66 |
| abstract_inverted_index.by | 183, 248 |
| abstract_inverted_index.in | 234 |
| abstract_inverted_index.is | 11, 28, 190, 220, 239, 246, 254 |
| abstract_inverted_index.it | 27, 189 |
| abstract_inverted_index.of | 3, 14, 37, 44, 70, 81, 94, 125, 133, 139, 222, 282, 288 |
| abstract_inverted_index.on | 17 |
| abstract_inverted_index.to | 30, 88, 119, 212, 256 |
| abstract_inverted_index.ε | 262 |
| abstract_inverted_index.(T) | 46 |
| abstract_inverted_index.500 | 76 |
| abstract_inverted_index.MZA | 217 |
| abstract_inverted_index.The | 0, 137 |
| abstract_inverted_index.and | 23, 32, 47, 75, 78, 85, 106, 135, 146, 162, 176, 181, 186, 216, 231, 250, 263, 268, 272, 291 |
| abstract_inverted_index.fit | 210 |
| abstract_inverted_index.its | 15 |
| abstract_inverted_index.one | 266 |
| abstract_inverted_index.out | 60 |
| abstract_inverted_index.set | 281 |
| abstract_inverted_index.the | 34, 54, 90, 122, 140, 153, 170, 193, 198, 204, 213, 223, 228, 235, 243, 257, 275, 285 |
| abstract_inverted_index.via | 61 |
| abstract_inverted_index.was | 144 |
| abstract_inverted_index.°C | 77 |
| abstract_inverted_index.ε, | 270 |
| abstract_inverted_index.(R), | 156 |
| abstract_inverted_index.0.1, | 83 |
| abstract_inverted_index.100, | 71 |
| abstract_inverted_index.200, | 72 |
| abstract_inverted_index.300, | 73 |
| abstract_inverted_index.400, | 74 |
| abstract_inverted_index.RMSE | 187 |
| abstract_inverted_index.This | 219, 253 |
| abstract_inverted_index.flow | 1, 35, 92, 123 |
| abstract_inverted_index.from | 173, 179, 197, 265, 274 |
| abstract_inverted_index.mean | 164 |
| abstract_inverted_index.root | 163 |
| abstract_inverted_index.side | 267, 277 |
| abstract_inverted_index.that | 192, 242, 259 |
| abstract_inverted_index.this | 38 |
| abstract_inverted_index.were | 58, 117 |
| abstract_inverted_index.wide | 42, 131 |
| abstract_inverted_index.with | 203 |
| abstract_inverted_index.ε˙ | 48, 79, 264 |
| abstract_inverted_index.(MZA) | 110 |
| abstract_inverted_index.(ε), | 22 |
| abstract_inverted_index.0.01, | 82 |
| abstract_inverted_index.AARE, | 185 |
| abstract_inverted_index.Thus, | 26 |
| abstract_inverted_index.align | 201 |
| abstract_inverted_index.alloy | 6, 39, 96, 127 |
| abstract_inverted_index.based | 114 |
| abstract_inverted_index.error | 160, 166 |
| abstract_inverted_index.known | 241 |
| abstract_inverted_index.model | 111, 200 |
| abstract_inverted_index.other | 276 |
| abstract_inverted_index.range | 43, 69, 80, 132 |
| abstract_inverted_index.rate, | 230 |
| abstract_inverted_index.rates | 19 |
| abstract_inverted_index.sheet | 128 |
| abstract_inverted_index.s−1 | 87 |
| abstract_inverted_index.tests | 57 |
| abstract_inverted_index.these | 174 |
| abstract_inverted_index.those | 177 |
| abstract_inverted_index.three | 99 |
| abstract_inverted_index.under | 7, 129 |
| abstract_inverted_index.using | 49, 148, 278 |
| abstract_inverted_index.ε˙, | 271 |
| abstract_inverted_index.ε˙. | 136 |
| abstract_inverted_index.AA2060 | 4, 95, 126 |
| abstract_inverted_index.L-MJC, | 215 |
| abstract_inverted_index.S2-MJC | 199, 236 |
| abstract_inverted_index.impact | 225 |
| abstract_inverted_index.model. | 237 |
| abstract_inverted_index.models | 102, 116, 143, 175 |
| abstract_inverted_index.modes. | 25 |
| abstract_inverted_index.rates. | 252 |
| abstract_inverted_index.reveal | 31, 89 |
| abstract_inverted_index.sheet. | 97 |
| abstract_inverted_index.square | 165 |
| abstract_inverted_index.strain | 18, 21, 229, 232, 251 |
| abstract_inverted_index.widely | 240 |
| abstract_inverted_index.(AARE), | 161 |
| abstract_inverted_index.(L-MJC, | 103 |
| abstract_inverted_index.(RMSE). | 167 |
| abstract_inverted_index.(ε˙), | 20 |
| abstract_inverted_index.S1-MJC, | 104, 214 |
| abstract_inverted_index.S2-MJC) | 105 |
| abstract_inverted_index.average | 157 |
| abstract_inverted_index.because | 13, 221 |
| abstract_inverted_index.between | 226, 261, 269 |
| abstract_inverted_index.carried | 59 |
| abstract_inverted_index.closely | 202 |
| abstract_inverted_index.crucial | 29 |
| abstract_inverted_index.dynamic | 289 |
| abstract_inverted_index.linking | 224 |
| abstract_inverted_index.models. | 52, 218 |
| abstract_inverted_index.predict | 33, 121 |
| abstract_inverted_index.process | 245 |
| abstract_inverted_index.results | 171 |
| abstract_inverted_index.tensile | 56 |
| abstract_inverted_index.values, | 188 |
| abstract_inverted_index.various | 149 |
| abstract_inverted_index.Firstly, | 53 |
| abstract_inverted_index.absolute | 158 |
| abstract_inverted_index.affected | 247 |
| abstract_inverted_index.assessed | 145 |
| abstract_inverted_index.compared | 147, 211 |
| abstract_inverted_index.modified | 108 |
| abstract_inverted_index.obtained | 178 |
| abstract_inverted_index.occurred | 260 |
| abstract_inverted_index.recovery | 290 |
| abstract_inverted_index.relative | 159 |
| abstract_inverted_index.stresses | 195 |
| abstract_inverted_index.warm/hot | 8, 91 |
| abstract_inverted_index.behaviour | 2, 124 |
| abstract_inverted_index.comparing | 169 |
| abstract_inverted_index.concluded | 191 |
| abstract_inverted_index.confirmed | 182 |
| abstract_inverted_index.constants | 283 |
| abstract_inverted_index.developed | 118, 141 |
| abstract_inverted_index.different | 50 |
| abstract_inverted_index.extensive | 280 |
| abstract_inverted_index.hardening | 233 |
| abstract_inverted_index.including | 152 |
| abstract_inverted_index.precisely | 120 |
| abstract_inverted_index.predicted | 194 |
| abstract_inverted_index.simulator | 65 |
| abstract_inverted_index.softening | 249, 292 |
| abstract_inverted_index.stresses, | 206 |
| abstract_inverted_index.attributed | 255 |
| abstract_inverted_index.behaviours | 36, 93 |
| abstract_inverted_index.components | 287 |
| abstract_inverted_index.conditions | 10 |
| abstract_inverted_index.dependency | 16 |
| abstract_inverted_index.determined | 172, 196 |
| abstract_inverted_index.isothermal | 55 |
| abstract_inverted_index.physically | 113 |
| abstract_inverted_index.remarkable | 209 |
| abstract_inverted_index.softening, | 227 |
| abstract_inverted_index.coefficient | 155 |
| abstract_inverted_index.complicated | 12 |
| abstract_inverted_index.correlating | 284 |
| abstract_inverted_index.correlation | 154 |
| abstract_inverted_index.deformation | 9, 24 |
| abstract_inverted_index.dislocation | 244 |
| abstract_inverted_index.mechanisms. | 293 |
| abstract_inverted_index.parameters, | 151 |
| abstract_inverted_index.statistical | 150 |
| abstract_inverted_index.Gleeble-3800 | 63 |
| abstract_inverted_index.constitutive | 51, 101, 115, 142, 286 |
| abstract_inverted_index.experimental | 205 |
| abstract_inverted_index.interactions | 258 |
| abstract_inverted_index.representing | 112 |
| abstract_inverted_index.temperatures | 45 |
| abstract_inverted_index.Consequently, | 98 |
| abstract_inverted_index.demonstrating | 207 |
| abstract_inverted_index.predictability | 138 |
| abstract_inverted_index.thermomechanical | 64 |
| abstract_inverted_index.experimentations, | 180 |
| abstract_inverted_index.Zerilli–Armstrong | 109 |
| abstract_inverted_index.phenomenological-based | 100 |
| cited_by_percentile_year.max | 97 |
| cited_by_percentile_year.min | 96 |
| corresponding_author_ids | https://openalex.org/A5079720111 |
| countries_distinct_count | 4 |
| institutions_distinct_count | 10 |
| corresponding_institution_ids | https://openalex.org/I142608572, https://openalex.org/I84058292 |
| citation_normalized_percentile.value | 0.85974731 |
| citation_normalized_percentile.is_in_top_1_percent | False |
| citation_normalized_percentile.is_in_top_10_percent | True |