Prediction Model of Deformation Resistance and Rolling Force of ESP Production Line Based on the Temperature Gradient Article Swipe
Panpan Li
,
Wei Li
,
Y.H. Liu
,
Ke Chen
,
Tao Wang
,
Qingxue Huang
·
YOU?
·
· 2025
· Open Access
·
· DOI: https://doi.org/10.1186/s10033-025-01269-9
YOU?
·
· 2025
· Open Access
·
· DOI: https://doi.org/10.1186/s10033-025-01269-9
The existence of significant core-surface temperature differences in the strips during the rolling process in the endless strip production line leads to low accuracy in calculating the hot rolling force model assuming uniform temperature. This paper divides the deformation zone of strips into cells along the thick and the roll direction considering the non-uniform distribution of temperature, strain, strain rate in the thick direction cell of the strips, and the change of deformation resistance in the roll direction cell of strips. Then this study separately establishes the temperature matrix, strain matrix, and strain rate matrix on the "thick direction-roll direction" of strips, and constructs a deformation resistance calculation model based on the matrix cell. Further, a model for calculating rolling forces applicable to this production line was derived based on the Orowan equilibrium differential equation. The accuracy of the rolling force model and temperature variation patterns of the thick-directional units of the rolled parts during rolling were verified by hot rolling simulation experiments on a strip with an embedded block of the same material. Take an endless strip production line in China as an example to carry out simulation calculations of Q235 material. The results show that the average calculation error of the model built in this paper is 4.4%. Simulation and error analysis of multiple materials and multiple specifications of strip steel show that the prediction accuracy of the model in this paper meets the requirements of the production line, which provides theoretical support for the formulation and optimization of the rolling process of this production line.
Related Topics
Concepts
No concepts available.
Metadata
- Type
- article
- Language
- en
- Landing Page
- https://doi.org/10.1186/s10033-025-01269-9
- https://cjme.springeropen.com/counter/pdf/10.1186/s10033-025-01269-9
- OA Status
- diamond
- References
- 24
- OpenAlex ID
- https://openalex.org/W4415898885
All OpenAlex metadata
Raw OpenAlex JSON
- OpenAlex ID
-
https://openalex.org/W4415898885Canonical identifier for this work in OpenAlex
- DOI
-
https://doi.org/10.1186/s10033-025-01269-9Digital Object Identifier
- Title
-
Prediction Model of Deformation Resistance and Rolling Force of ESP Production Line Based on the Temperature GradientWork title
- Type
-
articleOpenAlex work type
- Language
-
enPrimary language
- Publication year
-
2025Year of publication
- Publication date
-
2025-11-05Full publication date if available
- Authors
-
Panpan Li, Wei Li, Y.H. Liu, Ke Chen, Tao Wang, Qingxue HuangList of authors in order
- Landing page
-
https://doi.org/10.1186/s10033-025-01269-9Publisher landing page
- PDF URL
-
https://cjme.springeropen.com/counter/pdf/10.1186/s10033-025-01269-9Direct link to full text PDF
- Open access
-
YesWhether a free full text is available
- OA status
-
diamondOpen access status per OpenAlex
- OA URL
-
https://cjme.springeropen.com/counter/pdf/10.1186/s10033-025-01269-9Direct OA link when available
- Cited by
-
0Total citation count in OpenAlex
- References (count)
-
24Number of works referenced by this work
Full payload
| id | https://openalex.org/W4415898885 |
|---|---|
| doi | https://doi.org/10.1186/s10033-025-01269-9 |
| ids.doi | https://doi.org/10.1186/s10033-025-01269-9 |
| ids.openalex | https://openalex.org/W4415898885 |
| fwci | |
| type | article |
| title | Prediction Model of Deformation Resistance and Rolling Force of ESP Production Line Based on the Temperature Gradient |
| biblio.issue | 1 |
| biblio.volume | 38 |
| biblio.last_page | |
| biblio.first_page | |
| is_xpac | False |
| apc_list | |
| apc_paid | |
| language | en |
| locations[0].id | doi:10.1186/s10033-025-01269-9 |
| locations[0].is_oa | True |
| locations[0].source.id | https://openalex.org/S4220650901 |
| locations[0].source.issn | 1000-9345, 2192-8258 |
| locations[0].source.type | journal |
| locations[0].source.is_oa | True |
| locations[0].source.issn_l | 1000-9345 |
| locations[0].source.is_core | True |
| locations[0].source.is_in_doaj | True |
| locations[0].source.display_name | Chinese Journal of Mechanical Engineering |
| locations[0].source.host_organization | https://openalex.org/P4310319730 |
| locations[0].source.host_organization_name | China Machine Press |
| locations[0].source.host_organization_lineage | https://openalex.org/P4310319730 |
| locations[0].source.host_organization_lineage_names | China Machine Press |
| locations[0].license | cc-by |
| locations[0].pdf_url | https://cjme.springeropen.com/counter/pdf/10.1186/s10033-025-01269-9 |
| locations[0].version | publishedVersion |
| locations[0].raw_type | journal-article |
| locations[0].license_id | https://openalex.org/licenses/cc-by |
| locations[0].is_accepted | True |
| locations[0].is_published | True |
| locations[0].raw_source_name | Chinese Journal of Mechanical Engineering |
| locations[0].landing_page_url | https://doi.org/10.1186/s10033-025-01269-9 |
| indexed_in | crossref, doaj |
| authorships[0].author.id | https://openalex.org/A5028759930 |
| authorships[0].author.orcid | https://orcid.org/0000-0002-1416-5100 |
| authorships[0].author.display_name | Panpan Li |
| authorships[0].author_position | first |
| authorships[0].raw_author_name | Panpan Li |
| authorships[0].is_corresponding | False |
| authorships[1].author.id | https://openalex.org/A5100318159 |
| authorships[1].author.orcid | https://orcid.org/0000-0002-3008-9865 |
| authorships[1].author.display_name | Wei Li |
| authorships[1].author_position | middle |
| authorships[1].raw_author_name | Wei Li |
| authorships[1].is_corresponding | False |
| authorships[2].author.id | https://openalex.org/A5113304005 |
| authorships[2].author.orcid | https://orcid.org/0009-0009-5714-1334 |
| authorships[2].author.display_name | Y.H. Liu |
| authorships[2].author_position | middle |
| authorships[2].raw_author_name | Yaxing Liu |
| authorships[2].is_corresponding | False |
| authorships[3].author.id | https://openalex.org/A5100452017 |
| authorships[3].author.orcid | https://orcid.org/0000-0003-0433-5580 |
| authorships[3].author.display_name | Ke Chen |
| authorships[3].author_position | middle |
| authorships[3].raw_author_name | Ke Chen |
| authorships[3].is_corresponding | False |
| authorships[4].author.id | https://openalex.org/A5078263922 |
| authorships[4].author.orcid | https://orcid.org/0000-0002-4294-9690 |
| authorships[4].author.display_name | Tao Wang |
| authorships[4].author_position | middle |
| authorships[4].raw_author_name | Tao Wang |
| authorships[4].is_corresponding | False |
| authorships[5].author.id | https://openalex.org/A5068105992 |
| authorships[5].author.orcid | https://orcid.org/0000-0002-1927-8518 |
| authorships[5].author.display_name | Qingxue Huang |
| authorships[5].author_position | last |
| authorships[5].raw_author_name | Qingxue Huang |
| authorships[5].is_corresponding | False |
| has_content.pdf | True |
| has_content.grobid_xml | False |
| is_paratext | False |
| open_access.is_oa | True |
| open_access.oa_url | https://cjme.springeropen.com/counter/pdf/10.1186/s10033-025-01269-9 |
| open_access.oa_status | diamond |
| open_access.any_repository_has_fulltext | False |
| created_date | 2025-11-05T00:00:00 |
| display_name | Prediction Model of Deformation Resistance and Rolling Force of ESP Production Line Based on the Temperature Gradient |
| has_fulltext | False |
| is_retracted | False |
| updated_date | 2025-11-06T04:12:42.849631 |
| primary_topic | |
| cited_by_count | 0 |
| locations_count | 1 |
| best_oa_location.id | doi:10.1186/s10033-025-01269-9 |
| best_oa_location.is_oa | True |
| best_oa_location.source.id | https://openalex.org/S4220650901 |
| best_oa_location.source.issn | 1000-9345, 2192-8258 |
| best_oa_location.source.type | journal |
| best_oa_location.source.is_oa | True |
| best_oa_location.source.issn_l | 1000-9345 |
| best_oa_location.source.is_core | True |
| best_oa_location.source.is_in_doaj | True |
| best_oa_location.source.display_name | Chinese Journal of Mechanical Engineering |
| best_oa_location.source.host_organization | https://openalex.org/P4310319730 |
| best_oa_location.source.host_organization_name | China Machine Press |
| best_oa_location.source.host_organization_lineage | https://openalex.org/P4310319730 |
| best_oa_location.source.host_organization_lineage_names | China Machine Press |
| best_oa_location.license | cc-by |
| best_oa_location.pdf_url | https://cjme.springeropen.com/counter/pdf/10.1186/s10033-025-01269-9 |
| best_oa_location.version | publishedVersion |
| best_oa_location.raw_type | journal-article |
| best_oa_location.license_id | https://openalex.org/licenses/cc-by |
| best_oa_location.is_accepted | True |
| best_oa_location.is_published | True |
| best_oa_location.raw_source_name | Chinese Journal of Mechanical Engineering |
| best_oa_location.landing_page_url | https://doi.org/10.1186/s10033-025-01269-9 |
| primary_location.id | doi:10.1186/s10033-025-01269-9 |
| primary_location.is_oa | True |
| primary_location.source.id | https://openalex.org/S4220650901 |
| primary_location.source.issn | 1000-9345, 2192-8258 |
| primary_location.source.type | journal |
| primary_location.source.is_oa | True |
| primary_location.source.issn_l | 1000-9345 |
| primary_location.source.is_core | True |
| primary_location.source.is_in_doaj | True |
| primary_location.source.display_name | Chinese Journal of Mechanical Engineering |
| primary_location.source.host_organization | https://openalex.org/P4310319730 |
| primary_location.source.host_organization_name | China Machine Press |
| primary_location.source.host_organization_lineage | https://openalex.org/P4310319730 |
| primary_location.source.host_organization_lineage_names | China Machine Press |
| primary_location.license | cc-by |
| primary_location.pdf_url | https://cjme.springeropen.com/counter/pdf/10.1186/s10033-025-01269-9 |
| primary_location.version | publishedVersion |
| primary_location.raw_type | journal-article |
| primary_location.license_id | https://openalex.org/licenses/cc-by |
| primary_location.is_accepted | True |
| primary_location.is_published | True |
| primary_location.raw_source_name | Chinese Journal of Mechanical Engineering |
| primary_location.landing_page_url | https://doi.org/10.1186/s10033-025-01269-9 |
| publication_date | 2025-11-05 |
| publication_year | 2025 |
| referenced_works | https://openalex.org/W2918593144, https://openalex.org/W2998755311, https://openalex.org/W4315558479, https://openalex.org/W2062525109, https://openalex.org/W4390790943, https://openalex.org/W2936722886, https://openalex.org/W2088927317, https://openalex.org/W3198133029, https://openalex.org/W4382069007, https://openalex.org/W2128668792, https://openalex.org/W2980293608, https://openalex.org/W2032088812, https://openalex.org/W2216315490, https://openalex.org/W3166655052, https://openalex.org/W4285987798, https://openalex.org/W4294653599, https://openalex.org/W3160831181, https://openalex.org/W4293241509, https://openalex.org/W4379106327, https://openalex.org/W2019203401, https://openalex.org/W2046428009, https://openalex.org/W4392480095, https://openalex.org/W4220774866, https://openalex.org/W4379621936 |
| referenced_works_count | 24 |
| abstract_inverted_index.a | 105, 116, 165 |
| abstract_inverted_index.an | 168, 176, 184 |
| abstract_inverted_index.as | 183 |
| abstract_inverted_index.by | 159 |
| abstract_inverted_index.in | 8, 15, 25, 61, 75, 181, 206, 232 |
| abstract_inverted_index.is | 209 |
| abstract_inverted_index.of | 3, 41, 56, 66, 72, 80, 101, 138, 147, 151, 171, 191, 202, 215, 221, 229, 238, 251, 255 |
| abstract_inverted_index.on | 96, 111, 130, 164 |
| abstract_inverted_index.to | 22, 123, 186 |
| abstract_inverted_index.The | 1, 136, 194 |
| abstract_inverted_index.and | 48, 69, 92, 103, 143, 212, 218, 249 |
| abstract_inverted_index.for | 118, 246 |
| abstract_inverted_index.hot | 28, 160 |
| abstract_inverted_index.low | 23 |
| abstract_inverted_index.out | 188 |
| abstract_inverted_index.the | 9, 12, 16, 27, 38, 46, 49, 53, 62, 67, 70, 76, 87, 97, 112, 131, 139, 148, 152, 172, 198, 203, 226, 230, 236, 239, 247, 252 |
| abstract_inverted_index.was | 127 |
| abstract_inverted_index.Q235 | 192 |
| abstract_inverted_index.Take | 175 |
| abstract_inverted_index.Then | 82 |
| abstract_inverted_index.This | 35 |
| abstract_inverted_index.cell | 65, 79 |
| abstract_inverted_index.into | 43 |
| abstract_inverted_index.line | 20, 126, 180 |
| abstract_inverted_index.rate | 60, 94 |
| abstract_inverted_index.roll | 50, 77 |
| abstract_inverted_index.same | 173 |
| abstract_inverted_index.show | 196, 224 |
| abstract_inverted_index.that | 197, 225 |
| abstract_inverted_index.this | 83, 124, 207, 233, 256 |
| abstract_inverted_index.were | 157 |
| abstract_inverted_index.with | 167 |
| abstract_inverted_index.zone | 40 |
| abstract_inverted_index.4.4%. | 210 |
| abstract_inverted_index.China | 182 |
| abstract_inverted_index.along | 45 |
| abstract_inverted_index.based | 110, 129 |
| abstract_inverted_index.block | 170 |
| abstract_inverted_index.built | 205 |
| abstract_inverted_index.carry | 187 |
| abstract_inverted_index.cell. | 114 |
| abstract_inverted_index.cells | 44 |
| abstract_inverted_index.error | 201, 213 |
| abstract_inverted_index.force | 30, 141 |
| abstract_inverted_index.leads | 21 |
| abstract_inverted_index.line, | 241 |
| abstract_inverted_index.line. | 258 |
| abstract_inverted_index.meets | 235 |
| abstract_inverted_index.model | 31, 109, 117, 142, 204, 231 |
| abstract_inverted_index.paper | 36, 208, 234 |
| abstract_inverted_index.parts | 154 |
| abstract_inverted_index.steel | 223 |
| abstract_inverted_index.strip | 18, 166, 178, 222 |
| abstract_inverted_index.study | 84 |
| abstract_inverted_index.thick | 47, 63 |
| abstract_inverted_index.units | 150 |
| abstract_inverted_index.which | 242 |
| abstract_inverted_index."thick | 98 |
| abstract_inverted_index.Orowan | 132 |
| abstract_inverted_index.change | 71 |
| abstract_inverted_index.during | 11, 155 |
| abstract_inverted_index.forces | 121 |
| abstract_inverted_index.matrix | 95, 113 |
| abstract_inverted_index.rolled | 153 |
| abstract_inverted_index.strain | 59, 90, 93 |
| abstract_inverted_index.strips | 10, 42 |
| abstract_inverted_index.average | 199 |
| abstract_inverted_index.derived | 128 |
| abstract_inverted_index.divides | 37 |
| abstract_inverted_index.endless | 17, 177 |
| abstract_inverted_index.example | 185 |
| abstract_inverted_index.matrix, | 89, 91 |
| abstract_inverted_index.process | 14, 254 |
| abstract_inverted_index.results | 195 |
| abstract_inverted_index.rolling | 13, 29, 120, 140, 156, 161, 253 |
| abstract_inverted_index.strain, | 58 |
| abstract_inverted_index.strips, | 68, 102 |
| abstract_inverted_index.strips. | 81 |
| abstract_inverted_index.support | 245 |
| abstract_inverted_index.uniform | 33 |
| abstract_inverted_index.Abstract | 0 |
| abstract_inverted_index.Further, | 115 |
| abstract_inverted_index.accuracy | 24, 137, 228 |
| abstract_inverted_index.analysis | 214 |
| abstract_inverted_index.assuming | 32 |
| abstract_inverted_index.embedded | 169 |
| abstract_inverted_index.multiple | 216, 219 |
| abstract_inverted_index.patterns | 146 |
| abstract_inverted_index.provides | 243 |
| abstract_inverted_index.verified | 158 |
| abstract_inverted_index.direction | 51, 64, 78 |
| abstract_inverted_index.equation. | 135 |
| abstract_inverted_index.existence | 2 |
| abstract_inverted_index.material. | 174, 193 |
| abstract_inverted_index.materials | 217 |
| abstract_inverted_index.variation | 145 |
| abstract_inverted_index.Simulation | 211 |
| abstract_inverted_index.applicable | 122 |
| abstract_inverted_index.constructs | 104 |
| abstract_inverted_index.direction" | 100 |
| abstract_inverted_index.prediction | 227 |
| abstract_inverted_index.production | 19, 125, 179, 240, 257 |
| abstract_inverted_index.resistance | 74, 107 |
| abstract_inverted_index.separately | 85 |
| abstract_inverted_index.simulation | 162, 189 |
| abstract_inverted_index.calculating | 26, 119 |
| abstract_inverted_index.calculation | 108, 200 |
| abstract_inverted_index.considering | 52 |
| abstract_inverted_index.deformation | 39, 73, 106 |
| abstract_inverted_index.differences | 7 |
| abstract_inverted_index.equilibrium | 133 |
| abstract_inverted_index.establishes | 86 |
| abstract_inverted_index.experiments | 163 |
| abstract_inverted_index.formulation | 248 |
| abstract_inverted_index.non-uniform | 54 |
| abstract_inverted_index.significant | 4 |
| abstract_inverted_index.temperature | 6, 88, 144 |
| abstract_inverted_index.theoretical | 244 |
| abstract_inverted_index.calculations | 190 |
| abstract_inverted_index.core-surface | 5 |
| abstract_inverted_index.differential | 134 |
| abstract_inverted_index.distribution | 55 |
| abstract_inverted_index.optimization | 250 |
| abstract_inverted_index.requirements | 237 |
| abstract_inverted_index.temperature, | 57 |
| abstract_inverted_index.temperature. | 34 |
| abstract_inverted_index.direction-roll | 99 |
| abstract_inverted_index.specifications | 220 |
| abstract_inverted_index.thick-directional | 149 |
| cited_by_percentile_year | |
| countries_distinct_count | 0 |
| institutions_distinct_count | 6 |
| citation_normalized_percentile |