Rotor work characteristics and loss generation mechanism of an axial flow compressor at windmill operation Article Swipe
Nobumichi Fujisawa
,
Naomichi NISHIYAMA
,
Yutaka Ohta
,
Takashi Goto
,
Dai Kato
·
YOU?
·
· 2019
· Open Access
·
· DOI: https://doi.org/10.1299/transjsme.18-00493
YOU?
·
· 2019
· Open Access
·
· DOI: https://doi.org/10.1299/transjsme.18-00493
Work characteristics and loss generation mechanism of a single-stage axial flow compressor at windmill operation were investigated by experiment and CFD analyses. When the inlet flow coefficient is gradually increased from the design point, the rotor blade gradually enters the windmilling operation from the tip toward hub. The research attentions were focused on two windmilling operations, those were free-windmilling and highly loaded windmilling conditions. Total pressure loss under windmilling operations was mainly caused by three flow structures, those were (1) tip leakage flow from suction to pressure surface near the leading edge and that from pressure to suction surface near the trailing edge, (2) the interaction of separation vortices due to the highly negative incidence and the rotor leading-edge vortex, and (3) the boundary layer separation near the hub wall. The distribution of the rotor operating mode was found to exist not only in the span-wise direction but also in the chord-wise direction under the windmilling operations. The turbine mode region was observed near the leading edge, while the compressor mode region was observed near the trailing edge even in the highly loaded windmilling condition. Therefore, driving force of the windmilling was dominated not by the area of the turbine mode on the rotor blade but by the static pressure difference of suction and pressure surfaces on the rotor.
Related Topics
Concepts
Metadata
- Type
- article
- Language
- en
- Landing Page
- https://doi.org/10.1299/transjsme.18-00493
- https://www.jstage.jst.go.jp/article/transjsme/85/872/85_18-00493/_pdf
- OA Status
- gold
- References
- 12
- Related Works
- 10
- OpenAlex ID
- https://openalex.org/W2933184058
All OpenAlex metadata
Raw OpenAlex JSON
- OpenAlex ID
-
https://openalex.org/W2933184058Canonical identifier for this work in OpenAlex
- DOI
-
https://doi.org/10.1299/transjsme.18-00493Digital Object Identifier
- Title
-
Rotor work characteristics and loss generation mechanism of an axial flow compressor at windmill operationWork title
- Type
-
articleOpenAlex work type
- Language
-
enPrimary language
- Publication year
-
2019Year of publication
- Publication date
-
2019-01-01Full publication date if available
- Authors
-
Nobumichi Fujisawa, Naomichi NISHIYAMA, Yutaka Ohta, Takashi Goto, Dai KatoList of authors in order
- Landing page
-
https://doi.org/10.1299/transjsme.18-00493Publisher landing page
- PDF URL
-
https://www.jstage.jst.go.jp/article/transjsme/85/872/85_18-00493/_pdfDirect link to full text PDF
- Open access
-
YesWhether a free full text is available
- OA status
-
goldOpen access status per OpenAlex
- OA URL
-
https://www.jstage.jst.go.jp/article/transjsme/85/872/85_18-00493/_pdfDirect OA link when available
- Concepts
-
Trailing edge, Leading edge, Mechanics, Gas compressor, Rotor (electric), Turbine, Axial compressor, Vortex, Boundary layer, Suction, Flow separation, Materials science, Tip clearance, Engineering, Mechanical engineering, PhysicsTop concepts (fields/topics) attached by OpenAlex
- Cited by
-
0Total citation count in OpenAlex
- References (count)
-
12Number of works referenced by this work
- Related works (count)
-
10Other works algorithmically related by OpenAlex
Full payload
| id | https://openalex.org/W2933184058 |
|---|---|
| doi | https://doi.org/10.1299/transjsme.18-00493 |
| ids.doi | https://doi.org/10.1299/transjsme.18-00493 |
| ids.mag | 2933184058 |
| ids.openalex | https://openalex.org/W2933184058 |
| fwci | 0.0 |
| type | article |
| title | Rotor work characteristics and loss generation mechanism of an axial flow compressor at windmill operation |
| biblio.issue | 872 |
| biblio.volume | 85 |
| biblio.last_page | 00493 |
| biblio.first_page | 18 |
| topics[0].id | https://openalex.org/T10944 |
| topics[0].field.id | https://openalex.org/fields/22 |
| topics[0].field.display_name | Engineering |
| topics[0].score | 0.9998000264167786 |
| topics[0].domain.id | https://openalex.org/domains/3 |
| topics[0].domain.display_name | Physical Sciences |
| topics[0].subfield.id | https://openalex.org/subfields/2202 |
| topics[0].subfield.display_name | Aerospace Engineering |
| topics[0].display_name | Turbomachinery Performance and Optimization |
| topics[1].id | https://openalex.org/T11529 |
| topics[1].field.id | https://openalex.org/fields/22 |
| topics[1].field.display_name | Engineering |
| topics[1].score | 0.9994999766349792 |
| topics[1].domain.id | https://openalex.org/domains/3 |
| topics[1].domain.display_name | Physical Sciences |
| topics[1].subfield.id | https://openalex.org/subfields/2210 |
| topics[1].subfield.display_name | Mechanical Engineering |
| topics[1].display_name | Refrigeration and Air Conditioning Technologies |
| topics[2].id | https://openalex.org/T12081 |
| topics[2].field.id | https://openalex.org/fields/22 |
| topics[2].field.display_name | Engineering |
| topics[2].score | 0.998199999332428 |
| topics[2].domain.id | https://openalex.org/domains/3 |
| topics[2].domain.display_name | Physical Sciences |
| topics[2].subfield.id | https://openalex.org/subfields/2202 |
| topics[2].subfield.display_name | Aerospace Engineering |
| topics[2].display_name | Aerodynamics and Fluid Dynamics Research |
| is_xpac | False |
| apc_list.value | 80000 |
| apc_list.currency | JPY |
| apc_list.value_usd | 602 |
| apc_paid.value | 80000 |
| apc_paid.currency | JPY |
| apc_paid.value_usd | 602 |
| concepts[0].id | https://openalex.org/C28317120 |
| concepts[0].level | 2 |
| concepts[0].score | 0.7167102694511414 |
| concepts[0].wikidata | https://www.wikidata.org/wiki/Q975211 |
| concepts[0].display_name | Trailing edge |
| concepts[1].id | https://openalex.org/C2779570065 |
| concepts[1].level | 2 |
| concepts[1].score | 0.6426723003387451 |
| concepts[1].wikidata | https://www.wikidata.org/wiki/Q1754137 |
| concepts[1].display_name | Leading edge |
| concepts[2].id | https://openalex.org/C57879066 |
| concepts[2].level | 1 |
| concepts[2].score | 0.6411013603210449 |
| concepts[2].wikidata | https://www.wikidata.org/wiki/Q41217 |
| concepts[2].display_name | Mechanics |
| concepts[3].id | https://openalex.org/C131097465 |
| concepts[3].level | 2 |
| concepts[3].score | 0.6341203451156616 |
| concepts[3].wikidata | https://www.wikidata.org/wiki/Q178898 |
| concepts[3].display_name | Gas compressor |
| concepts[4].id | https://openalex.org/C17281054 |
| concepts[4].level | 2 |
| concepts[4].score | 0.5634720325469971 |
| concepts[4].wikidata | https://www.wikidata.org/wiki/Q193466 |
| concepts[4].display_name | Rotor (electric) |
| concepts[5].id | https://openalex.org/C2778449969 |
| concepts[5].level | 2 |
| concepts[5].score | 0.5252106785774231 |
| concepts[5].wikidata | https://www.wikidata.org/wiki/Q130760 |
| concepts[5].display_name | Turbine |
| concepts[6].id | https://openalex.org/C180788929 |
| concepts[6].level | 3 |
| concepts[6].score | 0.5139767527580261 |
| concepts[6].wikidata | https://www.wikidata.org/wiki/Q742777 |
| concepts[6].display_name | Axial compressor |
| concepts[7].id | https://openalex.org/C140820882 |
| concepts[7].level | 2 |
| concepts[7].score | 0.5101245045661926 |
| concepts[7].wikidata | https://www.wikidata.org/wiki/Q732722 |
| concepts[7].display_name | Vortex |
| concepts[8].id | https://openalex.org/C111603439 |
| concepts[8].level | 2 |
| concepts[8].score | 0.48558300733566284 |
| concepts[8].wikidata | https://www.wikidata.org/wiki/Q752193 |
| concepts[8].display_name | Boundary layer |
| concepts[9].id | https://openalex.org/C23795335 |
| concepts[9].level | 2 |
| concepts[9].score | 0.46390387415885925 |
| concepts[9].wikidata | https://www.wikidata.org/wiki/Q1790295 |
| concepts[9].display_name | Suction |
| concepts[10].id | https://openalex.org/C77576233 |
| concepts[10].level | 3 |
| concepts[10].score | 0.4563371241092682 |
| concepts[10].wikidata | https://www.wikidata.org/wiki/Q1545856 |
| concepts[10].display_name | Flow separation |
| concepts[11].id | https://openalex.org/C192562407 |
| concepts[11].level | 0 |
| concepts[11].score | 0.45556071400642395 |
| concepts[11].wikidata | https://www.wikidata.org/wiki/Q228736 |
| concepts[11].display_name | Materials science |
| concepts[12].id | https://openalex.org/C2779285531 |
| concepts[12].level | 3 |
| concepts[12].score | 0.4147067070007324 |
| concepts[12].wikidata | https://www.wikidata.org/wiki/Q17122921 |
| concepts[12].display_name | Tip clearance |
| concepts[13].id | https://openalex.org/C127413603 |
| concepts[13].level | 0 |
| concepts[13].score | 0.3212020993232727 |
| concepts[13].wikidata | https://www.wikidata.org/wiki/Q11023 |
| concepts[13].display_name | Engineering |
| concepts[14].id | https://openalex.org/C78519656 |
| concepts[14].level | 1 |
| concepts[14].score | 0.3000815510749817 |
| concepts[14].wikidata | https://www.wikidata.org/wiki/Q101333 |
| concepts[14].display_name | Mechanical engineering |
| concepts[15].id | https://openalex.org/C121332964 |
| concepts[15].level | 0 |
| concepts[15].score | 0.2706867456436157 |
| concepts[15].wikidata | https://www.wikidata.org/wiki/Q413 |
| concepts[15].display_name | Physics |
| keywords[0].id | https://openalex.org/keywords/trailing-edge |
| keywords[0].score | 0.7167102694511414 |
| keywords[0].display_name | Trailing edge |
| keywords[1].id | https://openalex.org/keywords/leading-edge |
| keywords[1].score | 0.6426723003387451 |
| keywords[1].display_name | Leading edge |
| keywords[2].id | https://openalex.org/keywords/mechanics |
| keywords[2].score | 0.6411013603210449 |
| keywords[2].display_name | Mechanics |
| keywords[3].id | https://openalex.org/keywords/gas-compressor |
| keywords[3].score | 0.6341203451156616 |
| keywords[3].display_name | Gas compressor |
| keywords[4].id | https://openalex.org/keywords/rotor |
| keywords[4].score | 0.5634720325469971 |
| keywords[4].display_name | Rotor (electric) |
| keywords[5].id | https://openalex.org/keywords/turbine |
| keywords[5].score | 0.5252106785774231 |
| keywords[5].display_name | Turbine |
| keywords[6].id | https://openalex.org/keywords/axial-compressor |
| keywords[6].score | 0.5139767527580261 |
| keywords[6].display_name | Axial compressor |
| keywords[7].id | https://openalex.org/keywords/vortex |
| keywords[7].score | 0.5101245045661926 |
| keywords[7].display_name | Vortex |
| keywords[8].id | https://openalex.org/keywords/boundary-layer |
| keywords[8].score | 0.48558300733566284 |
| keywords[8].display_name | Boundary layer |
| keywords[9].id | https://openalex.org/keywords/suction |
| keywords[9].score | 0.46390387415885925 |
| keywords[9].display_name | Suction |
| keywords[10].id | https://openalex.org/keywords/flow-separation |
| keywords[10].score | 0.4563371241092682 |
| keywords[10].display_name | Flow separation |
| keywords[11].id | https://openalex.org/keywords/materials-science |
| keywords[11].score | 0.45556071400642395 |
| keywords[11].display_name | Materials science |
| keywords[12].id | https://openalex.org/keywords/tip-clearance |
| keywords[12].score | 0.4147067070007324 |
| keywords[12].display_name | Tip clearance |
| keywords[13].id | https://openalex.org/keywords/engineering |
| keywords[13].score | 0.3212020993232727 |
| keywords[13].display_name | Engineering |
| keywords[14].id | https://openalex.org/keywords/mechanical-engineering |
| keywords[14].score | 0.3000815510749817 |
| keywords[14].display_name | Mechanical engineering |
| keywords[15].id | https://openalex.org/keywords/physics |
| keywords[15].score | 0.2706867456436157 |
| keywords[15].display_name | Physics |
| language | en |
| locations[0].id | doi:10.1299/transjsme.18-00493 |
| locations[0].is_oa | True |
| locations[0].source.id | https://openalex.org/S4210205410 |
| locations[0].source.issn | 2187-9761 |
| locations[0].source.type | journal |
| locations[0].source.is_oa | True |
| locations[0].source.issn_l | 2187-9761 |
| locations[0].source.is_core | False |
| locations[0].source.is_in_doaj | True |
| locations[0].source.display_name | Transactions of the JSME (in Japanese) |
| locations[0].source.host_organization | https://openalex.org/P4310313571 |
| locations[0].source.host_organization_name | Japan Society Mechanical Engineers |
| locations[0].source.host_organization_lineage | https://openalex.org/P4310313571 |
| locations[0].source.host_organization_lineage_names | Japan Society Mechanical Engineers |
| locations[0].license | |
| locations[0].pdf_url | https://www.jstage.jst.go.jp/article/transjsme/85/872/85_18-00493/_pdf |
| locations[0].version | publishedVersion |
| locations[0].raw_type | journal-article |
| locations[0].license_id | |
| locations[0].is_accepted | True |
| locations[0].is_published | True |
| locations[0].raw_source_name | Transactions of the JSME (in Japanese) |
| locations[0].landing_page_url | https://doi.org/10.1299/transjsme.18-00493 |
| locations[1].id | pmh:oai:doaj.org/article:4eee40618b7b40a789d5d39400fe069e |
| locations[1].is_oa | True |
| locations[1].source.id | https://openalex.org/S4306401280 |
| locations[1].source.issn | |
| locations[1].source.type | repository |
| locations[1].source.is_oa | False |
| locations[1].source.issn_l | |
| locations[1].source.is_core | False |
| locations[1].source.is_in_doaj | False |
| locations[1].source.display_name | DOAJ (DOAJ: Directory of Open Access Journals) |
| locations[1].source.host_organization | |
| locations[1].source.host_organization_name | |
| locations[1].license | cc-by-sa |
| locations[1].pdf_url | |
| locations[1].version | submittedVersion |
| locations[1].raw_type | article |
| locations[1].license_id | https://openalex.org/licenses/cc-by-sa |
| locations[1].is_accepted | False |
| locations[1].is_published | False |
| locations[1].raw_source_name | Nihon Kikai Gakkai ronbunshu, Vol 85, Iss 872, Pp 18-00493-18-00493 (2019) |
| locations[1].landing_page_url | https://doaj.org/article/4eee40618b7b40a789d5d39400fe069e |
| indexed_in | crossref, doaj |
| authorships[0].author.id | https://openalex.org/A5064976298 |
| authorships[0].author.orcid | https://orcid.org/0000-0003-1725-8916 |
| authorships[0].author.display_name | Nobumichi Fujisawa |
| authorships[0].countries | JP |
| authorships[0].affiliations[0].institution_ids | https://openalex.org/I150744194 |
| authorships[0].affiliations[0].raw_affiliation_string | Waseda Univ., Dept. of Applied Mechanics and Aerospace Engineering |
| authorships[0].institutions[0].id | https://openalex.org/I150744194 |
| authorships[0].institutions[0].ror | https://ror.org/00ntfnx83 |
| authorships[0].institutions[0].type | education |
| authorships[0].institutions[0].lineage | https://openalex.org/I150744194 |
| authorships[0].institutions[0].country_code | JP |
| authorships[0].institutions[0].display_name | Waseda University |
| authorships[0].author_position | first |
| authorships[0].raw_author_name | Nobumichi FUJISAWA |
| authorships[0].is_corresponding | False |
| authorships[0].raw_affiliation_strings | Waseda Univ., Dept. of Applied Mechanics and Aerospace Engineering |
| authorships[1].author.id | https://openalex.org/A5047419446 |
| authorships[1].author.orcid | |
| authorships[1].author.display_name | Naomichi NISHIYAMA |
| authorships[1].countries | JP |
| authorships[1].affiliations[0].institution_ids | https://openalex.org/I150744194 |
| authorships[1].affiliations[0].raw_affiliation_string | Waseda Univ., Dept. of Applied Mechanics and Aerospace Engineering |
| authorships[1].institutions[0].id | https://openalex.org/I150744194 |
| authorships[1].institutions[0].ror | https://ror.org/00ntfnx83 |
| authorships[1].institutions[0].type | education |
| authorships[1].institutions[0].lineage | https://openalex.org/I150744194 |
| authorships[1].institutions[0].country_code | JP |
| authorships[1].institutions[0].display_name | Waseda University |
| authorships[1].author_position | middle |
| authorships[1].raw_author_name | Naomichi NISHIYAMA |
| authorships[1].is_corresponding | False |
| authorships[1].raw_affiliation_strings | Waseda Univ., Dept. of Applied Mechanics and Aerospace Engineering |
| authorships[2].author.id | https://openalex.org/A5103209348 |
| authorships[2].author.orcid | https://orcid.org/0000-0003-0168-6289 |
| authorships[2].author.display_name | Yutaka Ohta |
| authorships[2].countries | JP |
| authorships[2].affiliations[0].institution_ids | https://openalex.org/I150744194 |
| authorships[2].affiliations[0].raw_affiliation_string | Waseda Univ., Dept. of Applied Mechanics and Aerospace Engineering 3-4-1 Okubo, Shinjuku-ku, Tokyo 169-8555, Japan |
| authorships[2].institutions[0].id | https://openalex.org/I150744194 |
| authorships[2].institutions[0].ror | https://ror.org/00ntfnx83 |
| authorships[2].institutions[0].type | education |
| authorships[2].institutions[0].lineage | https://openalex.org/I150744194 |
| authorships[2].institutions[0].country_code | JP |
| authorships[2].institutions[0].display_name | Waseda University |
| authorships[2].author_position | middle |
| authorships[2].raw_author_name | Yutaka OHTA |
| authorships[2].is_corresponding | True |
| authorships[2].raw_affiliation_strings | Waseda Univ., Dept. of Applied Mechanics and Aerospace Engineering 3-4-1 Okubo, Shinjuku-ku, Tokyo 169-8555, Japan |
| authorships[3].author.id | https://openalex.org/A5105828735 |
| authorships[3].author.orcid | https://orcid.org/0000-0001-9632-0540 |
| authorships[3].author.display_name | Takashi Goto |
| authorships[3].countries | CZ |
| authorships[3].affiliations[0].institution_ids | https://openalex.org/I4210123982 |
| authorships[3].affiliations[0].raw_affiliation_string | IHI Corporation |
| authorships[3].institutions[0].id | https://openalex.org/I4210123982 |
| authorships[3].institutions[0].ror | https://ror.org/02r10ma13 |
| authorships[3].institutions[0].type | company |
| authorships[3].institutions[0].lineage | https://openalex.org/I4210101228, https://openalex.org/I4210123982 |
| authorships[3].institutions[0].country_code | CZ |
| authorships[3].institutions[0].display_name | IHI Corporation (Czechia) |
| authorships[3].author_position | middle |
| authorships[3].raw_author_name | Takashi GOTO |
| authorships[3].is_corresponding | False |
| authorships[3].raw_affiliation_strings | IHI Corporation |
| authorships[4].author.id | https://openalex.org/A5084211203 |
| authorships[4].author.orcid | |
| authorships[4].author.display_name | Dai Kato |
| authorships[4].countries | JP |
| authorships[4].affiliations[0].institution_ids | https://openalex.org/I4210101228 |
| authorships[4].affiliations[0].raw_affiliation_string | IHI Corporation, 3975-18 Haijima-Cho, Akishima-Shi, Tokyo 196-8686, Japan |
| authorships[4].institutions[0].id | https://openalex.org/I4210101228 |
| authorships[4].institutions[0].ror | https://ror.org/018nb9n34 |
| authorships[4].institutions[0].type | company |
| authorships[4].institutions[0].lineage | https://openalex.org/I4210101228 |
| authorships[4].institutions[0].country_code | JP |
| authorships[4].institutions[0].display_name | IHI Corporation (Japan) |
| authorships[4].author_position | last |
| authorships[4].raw_author_name | Dai KATO |
| authorships[4].is_corresponding | False |
| authorships[4].raw_affiliation_strings | IHI Corporation, 3975-18 Haijima-Cho, Akishima-Shi, Tokyo 196-8686, Japan |
| has_content.pdf | True |
| has_content.grobid_xml | True |
| is_paratext | False |
| open_access.is_oa | True |
| open_access.oa_url | https://www.jstage.jst.go.jp/article/transjsme/85/872/85_18-00493/_pdf |
| open_access.oa_status | gold |
| open_access.any_repository_has_fulltext | False |
| created_date | 2025-10-10T00:00:00 |
| display_name | Rotor work characteristics and loss generation mechanism of an axial flow compressor at windmill operation |
| has_fulltext | True |
| is_retracted | False |
| updated_date | 2025-11-06T03:46:38.306776 |
| primary_topic.id | https://openalex.org/T10944 |
| primary_topic.field.id | https://openalex.org/fields/22 |
| primary_topic.field.display_name | Engineering |
| primary_topic.score | 0.9998000264167786 |
| primary_topic.domain.id | https://openalex.org/domains/3 |
| primary_topic.domain.display_name | Physical Sciences |
| primary_topic.subfield.id | https://openalex.org/subfields/2202 |
| primary_topic.subfield.display_name | Aerospace Engineering |
| primary_topic.display_name | Turbomachinery Performance and Optimization |
| related_works | https://openalex.org/W2133455613, https://openalex.org/W1976993631, https://openalex.org/W1972533780, https://openalex.org/W1942357415, https://openalex.org/W2007044293, https://openalex.org/W2318626729, https://openalex.org/W2035704066, https://openalex.org/W1982895311, https://openalex.org/W2354691083, https://openalex.org/W2172915508 |
| cited_by_count | 0 |
| locations_count | 2 |
| best_oa_location.id | doi:10.1299/transjsme.18-00493 |
| best_oa_location.is_oa | True |
| best_oa_location.source.id | https://openalex.org/S4210205410 |
| best_oa_location.source.issn | 2187-9761 |
| best_oa_location.source.type | journal |
| best_oa_location.source.is_oa | True |
| best_oa_location.source.issn_l | 2187-9761 |
| best_oa_location.source.is_core | False |
| best_oa_location.source.is_in_doaj | True |
| best_oa_location.source.display_name | Transactions of the JSME (in Japanese) |
| best_oa_location.source.host_organization | https://openalex.org/P4310313571 |
| best_oa_location.source.host_organization_name | Japan Society Mechanical Engineers |
| best_oa_location.source.host_organization_lineage | https://openalex.org/P4310313571 |
| best_oa_location.source.host_organization_lineage_names | Japan Society Mechanical Engineers |
| best_oa_location.license | |
| best_oa_location.pdf_url | https://www.jstage.jst.go.jp/article/transjsme/85/872/85_18-00493/_pdf |
| best_oa_location.version | publishedVersion |
| best_oa_location.raw_type | journal-article |
| best_oa_location.license_id | |
| best_oa_location.is_accepted | True |
| best_oa_location.is_published | True |
| best_oa_location.raw_source_name | Transactions of the JSME (in Japanese) |
| best_oa_location.landing_page_url | https://doi.org/10.1299/transjsme.18-00493 |
| primary_location.id | doi:10.1299/transjsme.18-00493 |
| primary_location.is_oa | True |
| primary_location.source.id | https://openalex.org/S4210205410 |
| primary_location.source.issn | 2187-9761 |
| primary_location.source.type | journal |
| primary_location.source.is_oa | True |
| primary_location.source.issn_l | 2187-9761 |
| primary_location.source.is_core | False |
| primary_location.source.is_in_doaj | True |
| primary_location.source.display_name | Transactions of the JSME (in Japanese) |
| primary_location.source.host_organization | https://openalex.org/P4310313571 |
| primary_location.source.host_organization_name | Japan Society Mechanical Engineers |
| primary_location.source.host_organization_lineage | https://openalex.org/P4310313571 |
| primary_location.source.host_organization_lineage_names | Japan Society Mechanical Engineers |
| primary_location.license | |
| primary_location.pdf_url | https://www.jstage.jst.go.jp/article/transjsme/85/872/85_18-00493/_pdf |
| primary_location.version | publishedVersion |
| primary_location.raw_type | journal-article |
| primary_location.license_id | |
| primary_location.is_accepted | True |
| primary_location.is_published | True |
| primary_location.raw_source_name | Transactions of the JSME (in Japanese) |
| primary_location.landing_page_url | https://doi.org/10.1299/transjsme.18-00493 |
| publication_date | 2019-01-01 |
| publication_year | 2019 |
| referenced_works | https://openalex.org/W2134443124, https://openalex.org/W2642076646, https://openalex.org/W2077119306, https://openalex.org/W2605520282, https://openalex.org/W2088557423, https://openalex.org/W2136088098, https://openalex.org/W4229879582, https://openalex.org/W2810033266, https://openalex.org/W2087397940, https://openalex.org/W6725100510, https://openalex.org/W2138066640, https://openalex.org/W6738790052 |
| referenced_works_count | 12 |
| abstract_inverted_index.a | 7 |
| abstract_inverted_index.at | 12 |
| abstract_inverted_index.by | 17, 73, 194, 206 |
| abstract_inverted_index.in | 143, 149, 179 |
| abstract_inverted_index.is | 27 |
| abstract_inverted_index.of | 6, 106, 132, 188, 197, 211 |
| abstract_inverted_index.on | 52, 201, 216 |
| abstract_inverted_index.to | 85, 96, 110, 139 |
| abstract_inverted_index.(1) | 79 |
| abstract_inverted_index.(2) | 103 |
| abstract_inverted_index.(3) | 121 |
| abstract_inverted_index.CFD | 20 |
| abstract_inverted_index.The | 47, 130, 157 |
| abstract_inverted_index.and | 2, 19, 59, 92, 115, 120, 213 |
| abstract_inverted_index.but | 147, 205 |
| abstract_inverted_index.due | 109 |
| abstract_inverted_index.hub | 128 |
| abstract_inverted_index.not | 141, 193 |
| abstract_inverted_index.the | 23, 31, 34, 39, 43, 89, 100, 104, 111, 116, 122, 127, 133, 144, 150, 154, 164, 168, 175, 180, 189, 195, 198, 202, 207, 217 |
| abstract_inverted_index.tip | 44, 80 |
| abstract_inverted_index.two | 53 |
| abstract_inverted_index.was | 70, 137, 161, 172, 191 |
| abstract_inverted_index.When | 22 |
| abstract_inverted_index.Work | 0 |
| abstract_inverted_index.also | 148 |
| abstract_inverted_index.area | 196 |
| abstract_inverted_index.edge | 91, 177 |
| abstract_inverted_index.even | 178 |
| abstract_inverted_index.flow | 10, 25, 75, 82 |
| abstract_inverted_index.from | 30, 42, 83, 94 |
| abstract_inverted_index.hub. | 46 |
| abstract_inverted_index.loss | 3, 66 |
| abstract_inverted_index.mode | 136, 159, 170, 200 |
| abstract_inverted_index.near | 88, 99, 126, 163, 174 |
| abstract_inverted_index.only | 142 |
| abstract_inverted_index.that | 93 |
| abstract_inverted_index.were | 15, 50, 57, 78 |
| abstract_inverted_index.Total | 64 |
| abstract_inverted_index.axial | 9 |
| abstract_inverted_index.blade | 36, 204 |
| abstract_inverted_index.edge, | 102, 166 |
| abstract_inverted_index.exist | 140 |
| abstract_inverted_index.force | 187 |
| abstract_inverted_index.found | 138 |
| abstract_inverted_index.inlet | 24 |
| abstract_inverted_index.layer | 124 |
| abstract_inverted_index.rotor | 35, 117, 134, 203 |
| abstract_inverted_index.those | 56, 77 |
| abstract_inverted_index.three | 74 |
| abstract_inverted_index.under | 67, 153 |
| abstract_inverted_index.wall. | 129 |
| abstract_inverted_index.while | 167 |
| abstract_inverted_index.caused | 72 |
| abstract_inverted_index.design | 32 |
| abstract_inverted_index.enters | 38 |
| abstract_inverted_index.highly | 60, 112, 181 |
| abstract_inverted_index.loaded | 61, 182 |
| abstract_inverted_index.mainly | 71 |
| abstract_inverted_index.point, | 33 |
| abstract_inverted_index.region | 160, 171 |
| abstract_inverted_index.rotor. | 218 |
| abstract_inverted_index.static | 208 |
| abstract_inverted_index.toward | 45 |
| abstract_inverted_index.driving | 186 |
| abstract_inverted_index.focused | 51 |
| abstract_inverted_index.leading | 90, 165 |
| abstract_inverted_index.leakage | 81 |
| abstract_inverted_index.suction | 84, 97, 212 |
| abstract_inverted_index.surface | 87, 98 |
| abstract_inverted_index.turbine | 158, 199 |
| abstract_inverted_index.vortex, | 119 |
| abstract_inverted_index.boundary | 123 |
| abstract_inverted_index.negative | 113 |
| abstract_inverted_index.observed | 162, 173 |
| abstract_inverted_index.pressure | 65, 86, 95, 209, 214 |
| abstract_inverted_index.research | 48 |
| abstract_inverted_index.surfaces | 215 |
| abstract_inverted_index.trailing | 101, 176 |
| abstract_inverted_index.vortices | 108 |
| abstract_inverted_index.windmill | 13 |
| abstract_inverted_index.analyses. | 21 |
| abstract_inverted_index.direction | 146, 152 |
| abstract_inverted_index.dominated | 192 |
| abstract_inverted_index.gradually | 28, 37 |
| abstract_inverted_index.incidence | 114 |
| abstract_inverted_index.increased | 29 |
| abstract_inverted_index.mechanism | 5 |
| abstract_inverted_index.operating | 135 |
| abstract_inverted_index.operation | 14, 41 |
| abstract_inverted_index.span-wise | 145 |
| abstract_inverted_index.Therefore, | 185 |
| abstract_inverted_index.attentions | 49 |
| abstract_inverted_index.chord-wise | 151 |
| abstract_inverted_index.compressor | 11, 169 |
| abstract_inverted_index.condition. | 184 |
| abstract_inverted_index.difference | 210 |
| abstract_inverted_index.experiment | 18 |
| abstract_inverted_index.generation | 4 |
| abstract_inverted_index.operations | 69 |
| abstract_inverted_index.separation | 107, 125 |
| abstract_inverted_index.coefficient | 26 |
| abstract_inverted_index.conditions. | 63 |
| abstract_inverted_index.interaction | 105 |
| abstract_inverted_index.operations, | 55 |
| abstract_inverted_index.operations. | 156 |
| abstract_inverted_index.structures, | 76 |
| abstract_inverted_index.windmilling | 40, 54, 62, 68, 155, 183, 190 |
| abstract_inverted_index.distribution | 131 |
| abstract_inverted_index.investigated | 16 |
| abstract_inverted_index.leading-edge | 118 |
| abstract_inverted_index.single-stage | 8 |
| abstract_inverted_index.characteristics | 1 |
| abstract_inverted_index.free-windmilling | 58 |
| cited_by_percentile_year | |
| corresponding_author_ids | https://openalex.org/A5103209348 |
| countries_distinct_count | 2 |
| institutions_distinct_count | 5 |
| corresponding_institution_ids | https://openalex.org/I150744194 |
| sustainable_development_goals[0].id | https://metadata.un.org/sdg/7 |
| sustainable_development_goals[0].score | 0.8600000143051147 |
| sustainable_development_goals[0].display_name | Affordable and clean energy |
| citation_normalized_percentile.value | 0.01473414 |
| citation_normalized_percentile.is_in_top_1_percent | False |
| citation_normalized_percentile.is_in_top_10_percent | False |