Structural Design and Analysis of an Automated Cutting Device for a Grass Carp Product Based on SolidWorks Article Swipe
Xiang Chen
,
Jibing Chen
,
Yiping Wu
·
YOU?
·
· 2025
· Open Access
·
· DOI: https://doi.org/10.3390/machines13121081
YOU?
·
· 2025
· Open Access
·
· DOI: https://doi.org/10.3390/machines13121081
When addressing the issue that the current market sales of fresh aquatic products, which are segmented into sections, mainly rely on manual operations, there are problems such as high labor intensity, low cutting efficiency, and uneven cutting. This paper designs an automated cutting device based on the commonly used grass carp as the object. Firstly, two efficient cutting schemes were proposed and compared. The optimized cutting scheme was designed using the SolidWorks software 2021. Then, three optimized schemes for the automatic clamping module, transmission module, and pushing module were designed. Subsequently, the structural design and calculation analysis of the key internal components were carried out to build the three-dimensional model of the automatic grass carp cutting device, and the cutting prototype was manufactured. Finally, an automated cutting prototype was fabricated based on the above-mentioned optimized design schemes, and relevant tests and analyses were conducted. The results showed that the prototype device can cut grass carp with a length of 300 ± 5 mm, with a processing capacity of 200 kg/h. The surface damage rate is less than 5%, and the cutting efficiency has been improved while the surface damage rate has significantly decreased. Therefore, the device manufactured through this design can meet the rapid processing, cutting, and various specific processing requirements of grass carp and other fresh aquatic products, providing a feasible solution for aquatic product cutting manufacturing equipment.
Related Topics
Concepts
No concepts available.
Metadata
- Type
- article
- Language
- en
- Landing Page
- https://doi.org/10.3390/machines13121081
- https://www.mdpi.com/2075-1702/13/12/1081/pdf?version=1763998886
- OA Status
- gold
- References
- 32
- OpenAlex ID
- https://openalex.org/W4416674491
All OpenAlex metadata
Raw OpenAlex JSON
- OpenAlex ID
-
https://openalex.org/W4416674491Canonical identifier for this work in OpenAlex
- DOI
-
https://doi.org/10.3390/machines13121081Digital Object Identifier
- Title
-
Structural Design and Analysis of an Automated Cutting Device for a Grass Carp Product Based on SolidWorksWork title
- Type
-
articleOpenAlex work type
- Language
-
enPrimary language
- Publication year
-
2025Year of publication
- Publication date
-
2025-11-24Full publication date if available
- Authors
-
Xiang Chen, Jibing Chen, Yiping WuList of authors in order
- Landing page
-
https://doi.org/10.3390/machines13121081Publisher landing page
- PDF URL
-
https://www.mdpi.com/2075-1702/13/12/1081/pdf?version=1763998886Direct link to full text PDF
- Open access
-
YesWhether a free full text is available
- OA status
-
goldOpen access status per OpenAlex
- OA URL
-
https://www.mdpi.com/2075-1702/13/12/1081/pdf?version=1763998886Direct OA link when available
- Cited by
-
0Total citation count in OpenAlex
- References (count)
-
32Number of works referenced by this work
Full payload
| id | https://openalex.org/W4416674491 |
|---|---|
| doi | https://doi.org/10.3390/machines13121081 |
| ids.doi | https://doi.org/10.3390/machines13121081 |
| ids.openalex | https://openalex.org/W4416674491 |
| fwci | |
| type | article |
| title | Structural Design and Analysis of an Automated Cutting Device for a Grass Carp Product Based on SolidWorks |
| biblio.issue | 12 |
| biblio.volume | 13 |
| biblio.last_page | 1081 |
| biblio.first_page | 1081 |
| is_xpac | False |
| apc_list.value | 1800 |
| apc_list.currency | CHF |
| apc_list.value_usd | 1949 |
| apc_paid.value | 1800 |
| apc_paid.currency | CHF |
| apc_paid.value_usd | 1949 |
| language | en |
| locations[0].id | doi:10.3390/machines13121081 |
| locations[0].is_oa | True |
| locations[0].source.id | https://openalex.org/S4210219839 |
| locations[0].source.issn | 2075-1702 |
| locations[0].source.type | journal |
| locations[0].source.is_oa | True |
| locations[0].source.issn_l | 2075-1702 |
| locations[0].source.is_core | True |
| locations[0].source.is_in_doaj | True |
| locations[0].source.display_name | Machines |
| locations[0].source.host_organization | https://openalex.org/P4310310987 |
| locations[0].source.host_organization_name | Multidisciplinary Digital Publishing Institute |
| locations[0].source.host_organization_lineage | https://openalex.org/P4310310987 |
| locations[0].source.host_organization_lineage_names | Multidisciplinary Digital Publishing Institute |
| locations[0].license | cc-by |
| locations[0].pdf_url | https://www.mdpi.com/2075-1702/13/12/1081/pdf?version=1763998886 |
| locations[0].version | publishedVersion |
| locations[0].raw_type | journal-article |
| locations[0].license_id | https://openalex.org/licenses/cc-by |
| locations[0].is_accepted | True |
| locations[0].is_published | True |
| locations[0].raw_source_name | Machines |
| locations[0].landing_page_url | https://doi.org/10.3390/machines13121081 |
| indexed_in | crossref, doaj |
| authorships[0].author.id | https://openalex.org/A5100441907 |
| authorships[0].author.orcid | https://orcid.org/0000-0002-0557-0905 |
| authorships[0].author.display_name | Xiang Chen |
| authorships[0].countries | CN |
| authorships[0].affiliations[0].institution_ids | https://openalex.org/I74525822 |
| authorships[0].affiliations[0].raw_affiliation_string | School of Material Science & Chemical Engineering, Hubei University of Technology, Wuhan 430068, China |
| authorships[0].affiliations[1].institution_ids | https://openalex.org/I14116566 |
| authorships[0].affiliations[1].raw_affiliation_string | School of Mechanical Engineering, Wuhan Polytechnic University, Wuhan 420023, China |
| authorships[0].institutions[0].id | https://openalex.org/I74525822 |
| authorships[0].institutions[0].ror | https://ror.org/02d3fj342 |
| authorships[0].institutions[0].type | education |
| authorships[0].institutions[0].lineage | https://openalex.org/I74525822 |
| authorships[0].institutions[0].country_code | CN |
| authorships[0].institutions[0].display_name | Hubei University of Technology |
| authorships[0].institutions[1].id | https://openalex.org/I14116566 |
| authorships[0].institutions[1].ror | https://ror.org/05w0e5j23 |
| authorships[0].institutions[1].type | education |
| authorships[0].institutions[1].lineage | https://openalex.org/I14116566 |
| authorships[0].institutions[1].country_code | CN |
| authorships[0].institutions[1].display_name | Wuhan Polytechnic University |
| authorships[0].author_position | first |
| authorships[0].raw_author_name | Xiaoqiu Chen |
| authorships[0].is_corresponding | False |
| authorships[0].raw_affiliation_strings | School of Material Science & Chemical Engineering, Hubei University of Technology, Wuhan 430068, China, School of Mechanical Engineering, Wuhan Polytechnic University, Wuhan 420023, China |
| authorships[1].author.id | https://openalex.org/A5102848124 |
| authorships[1].author.orcid | https://orcid.org/0000-0003-3453-2112 |
| authorships[1].author.display_name | Jibing Chen |
| authorships[1].countries | CN |
| authorships[1].affiliations[0].institution_ids | https://openalex.org/I14116566 |
| authorships[1].affiliations[0].raw_affiliation_string | School of Mechanical Engineering, Wuhan Polytechnic University, Wuhan 420023, China |
| authorships[1].institutions[0].id | https://openalex.org/I14116566 |
| authorships[1].institutions[0].ror | https://ror.org/05w0e5j23 |
| authorships[1].institutions[0].type | education |
| authorships[1].institutions[0].lineage | https://openalex.org/I14116566 |
| authorships[1].institutions[0].country_code | CN |
| authorships[1].institutions[0].display_name | Wuhan Polytechnic University |
| authorships[1].author_position | middle |
| authorships[1].raw_author_name | Jibing Chen |
| authorships[1].is_corresponding | True |
| authorships[1].raw_affiliation_strings | School of Mechanical Engineering, Wuhan Polytechnic University, Wuhan 420023, China |
| authorships[2].author.id | https://openalex.org/A5102861731 |
| authorships[2].author.orcid | https://orcid.org/0000-0002-5242-4740 |
| authorships[2].author.display_name | Yiping Wu |
| authorships[2].countries | CN |
| authorships[2].affiliations[0].institution_ids | https://openalex.org/I47720641 |
| authorships[2].affiliations[0].raw_affiliation_string | School of Materials Science and Engineering, Huazhong University of Science & Technology, Wuhan 430074, China |
| authorships[2].institutions[0].id | https://openalex.org/I47720641 |
| authorships[2].institutions[0].ror | https://ror.org/00p991c53 |
| authorships[2].institutions[0].type | education |
| authorships[2].institutions[0].lineage | https://openalex.org/I47720641 |
| authorships[2].institutions[0].country_code | CN |
| authorships[2].institutions[0].display_name | Huazhong University of Science and Technology |
| authorships[2].author_position | last |
| authorships[2].raw_author_name | Yiping Wu |
| authorships[2].is_corresponding | False |
| authorships[2].raw_affiliation_strings | School of Materials Science and Engineering, Huazhong University of Science & Technology, Wuhan 430074, China |
| has_content.pdf | True |
| has_content.grobid_xml | False |
| is_paratext | False |
| open_access.is_oa | True |
| open_access.oa_url | https://www.mdpi.com/2075-1702/13/12/1081/pdf?version=1763998886 |
| open_access.oa_status | gold |
| open_access.any_repository_has_fulltext | False |
| created_date | 2025-11-25T00:00:00 |
| display_name | Structural Design and Analysis of an Automated Cutting Device for a Grass Carp Product Based on SolidWorks |
| has_fulltext | False |
| is_retracted | False |
| updated_date | 2025-11-28T20:20:55.639768 |
| primary_topic | |
| cited_by_count | 0 |
| locations_count | 1 |
| best_oa_location.id | doi:10.3390/machines13121081 |
| best_oa_location.is_oa | True |
| best_oa_location.source.id | https://openalex.org/S4210219839 |
| best_oa_location.source.issn | 2075-1702 |
| best_oa_location.source.type | journal |
| best_oa_location.source.is_oa | True |
| best_oa_location.source.issn_l | 2075-1702 |
| best_oa_location.source.is_core | True |
| best_oa_location.source.is_in_doaj | True |
| best_oa_location.source.display_name | Machines |
| best_oa_location.source.host_organization | https://openalex.org/P4310310987 |
| best_oa_location.source.host_organization_name | Multidisciplinary Digital Publishing Institute |
| best_oa_location.source.host_organization_lineage | https://openalex.org/P4310310987 |
| best_oa_location.source.host_organization_lineage_names | Multidisciplinary Digital Publishing Institute |
| best_oa_location.license | cc-by |
| best_oa_location.pdf_url | https://www.mdpi.com/2075-1702/13/12/1081/pdf?version=1763998886 |
| best_oa_location.version | publishedVersion |
| best_oa_location.raw_type | journal-article |
| best_oa_location.license_id | https://openalex.org/licenses/cc-by |
| best_oa_location.is_accepted | True |
| best_oa_location.is_published | True |
| best_oa_location.raw_source_name | Machines |
| best_oa_location.landing_page_url | https://doi.org/10.3390/machines13121081 |
| primary_location.id | doi:10.3390/machines13121081 |
| primary_location.is_oa | True |
| primary_location.source.id | https://openalex.org/S4210219839 |
| primary_location.source.issn | 2075-1702 |
| primary_location.source.type | journal |
| primary_location.source.is_oa | True |
| primary_location.source.issn_l | 2075-1702 |
| primary_location.source.is_core | True |
| primary_location.source.is_in_doaj | True |
| primary_location.source.display_name | Machines |
| primary_location.source.host_organization | https://openalex.org/P4310310987 |
| primary_location.source.host_organization_name | Multidisciplinary Digital Publishing Institute |
| primary_location.source.host_organization_lineage | https://openalex.org/P4310310987 |
| primary_location.source.host_organization_lineage_names | Multidisciplinary Digital Publishing Institute |
| primary_location.license | cc-by |
| primary_location.pdf_url | https://www.mdpi.com/2075-1702/13/12/1081/pdf?version=1763998886 |
| primary_location.version | publishedVersion |
| primary_location.raw_type | journal-article |
| primary_location.license_id | https://openalex.org/licenses/cc-by |
| primary_location.is_accepted | True |
| primary_location.is_published | True |
| primary_location.raw_source_name | Machines |
| primary_location.landing_page_url | https://doi.org/10.3390/machines13121081 |
| publication_date | 2025-11-24 |
| publication_year | 2025 |
| referenced_works | https://openalex.org/W2947666608, https://openalex.org/W2115262504, https://openalex.org/W1986778776, https://openalex.org/W4360602561, https://openalex.org/W4402018573, https://openalex.org/W4207011572, https://openalex.org/W4402488542, https://openalex.org/W2992929296, https://openalex.org/W4403741642, https://openalex.org/W4383619852, https://openalex.org/W4409269447, https://openalex.org/W4309486625, https://openalex.org/W4405123527, https://openalex.org/W3109266266, https://openalex.org/W4412617964, https://openalex.org/W1973101640, https://openalex.org/W3112327298, https://openalex.org/W4284685986, https://openalex.org/W3098644213, https://openalex.org/W4404039166, https://openalex.org/W1976329487, https://openalex.org/W1551915675, https://openalex.org/W4394844162, https://openalex.org/W4387215832, https://openalex.org/W2967092886, https://openalex.org/W1490721427, https://openalex.org/W4200243490, https://openalex.org/W638693572, https://openalex.org/W4403581056, https://openalex.org/W4392975739, https://openalex.org/W4402584890, https://openalex.org/W3115321931 |
| referenced_works_count | 32 |
| abstract_inverted_index.5 | 161 |
| abstract_inverted_index.a | 156, 164, 220 |
| abstract_inverted_index.an | 40, 124 |
| abstract_inverted_index.as | 27, 51 |
| abstract_inverted_index.is | 174 |
| abstract_inverted_index.of | 9, 97, 110, 158, 167, 211 |
| abstract_inverted_index.on | 20, 45, 131 |
| abstract_inverted_index.to | 105 |
| abstract_inverted_index.± | 160 |
| abstract_inverted_index.200 | 168 |
| abstract_inverted_index.300 | 159 |
| abstract_inverted_index.5%, | 177 |
| abstract_inverted_index.The | 63, 144, 170 |
| abstract_inverted_index.and | 34, 61, 85, 94, 117, 137, 140, 178, 206, 214 |
| abstract_inverted_index.are | 14, 24 |
| abstract_inverted_index.can | 151, 200 |
| abstract_inverted_index.cut | 152 |
| abstract_inverted_index.for | 78, 223 |
| abstract_inverted_index.has | 182, 190 |
| abstract_inverted_index.key | 99 |
| abstract_inverted_index.low | 31 |
| abstract_inverted_index.mm, | 162 |
| abstract_inverted_index.out | 104 |
| abstract_inverted_index.the | 2, 5, 46, 52, 70, 79, 91, 98, 107, 111, 118, 132, 148, 179, 186, 194, 202 |
| abstract_inverted_index.two | 55 |
| abstract_inverted_index.was | 67, 121, 128 |
| abstract_inverted_index.This | 37 |
| abstract_inverted_index.When | 0 |
| abstract_inverted_index.been | 183 |
| abstract_inverted_index.carp | 50, 114, 154, 213 |
| abstract_inverted_index.high | 28 |
| abstract_inverted_index.into | 16 |
| abstract_inverted_index.less | 175 |
| abstract_inverted_index.meet | 201 |
| abstract_inverted_index.rate | 173, 189 |
| abstract_inverted_index.rely | 19 |
| abstract_inverted_index.such | 26 |
| abstract_inverted_index.than | 176 |
| abstract_inverted_index.that | 4, 147 |
| abstract_inverted_index.this | 198 |
| abstract_inverted_index.used | 48 |
| abstract_inverted_index.were | 59, 88, 102, 142 |
| abstract_inverted_index.with | 155, 163 |
| abstract_inverted_index.2021. | 73 |
| abstract_inverted_index.Then, | 74 |
| abstract_inverted_index.based | 44, 130 |
| abstract_inverted_index.build | 106 |
| abstract_inverted_index.fresh | 10, 216 |
| abstract_inverted_index.grass | 49, 113, 153, 212 |
| abstract_inverted_index.issue | 3 |
| abstract_inverted_index.kg/h. | 169 |
| abstract_inverted_index.labor | 29 |
| abstract_inverted_index.model | 109 |
| abstract_inverted_index.other | 215 |
| abstract_inverted_index.paper | 38 |
| abstract_inverted_index.rapid | 203 |
| abstract_inverted_index.sales | 8 |
| abstract_inverted_index.tests | 139 |
| abstract_inverted_index.there | 23 |
| abstract_inverted_index.three | 75 |
| abstract_inverted_index.using | 69 |
| abstract_inverted_index.which | 13 |
| abstract_inverted_index.while | 185 |
| abstract_inverted_index.damage | 172, 188 |
| abstract_inverted_index.design | 93, 135, 199 |
| abstract_inverted_index.device | 43, 150, 195 |
| abstract_inverted_index.length | 157 |
| abstract_inverted_index.mainly | 18 |
| abstract_inverted_index.manual | 21 |
| abstract_inverted_index.market | 7 |
| abstract_inverted_index.module | 87 |
| abstract_inverted_index.scheme | 66 |
| abstract_inverted_index.showed | 146 |
| abstract_inverted_index.uneven | 35 |
| abstract_inverted_index.aquatic | 11, 217, 224 |
| abstract_inverted_index.carried | 103 |
| abstract_inverted_index.current | 6 |
| abstract_inverted_index.cutting | 32, 42, 57, 65, 115, 119, 126, 180, 226 |
| abstract_inverted_index.designs | 39 |
| abstract_inverted_index.device, | 116 |
| abstract_inverted_index.module, | 82, 84 |
| abstract_inverted_index.object. | 53 |
| abstract_inverted_index.product | 225 |
| abstract_inverted_index.pushing | 86 |
| abstract_inverted_index.results | 145 |
| abstract_inverted_index.schemes | 58, 77 |
| abstract_inverted_index.surface | 171, 187 |
| abstract_inverted_index.through | 197 |
| abstract_inverted_index.various | 207 |
| abstract_inverted_index.Finally, | 123 |
| abstract_inverted_index.Firstly, | 54 |
| abstract_inverted_index.analyses | 141 |
| abstract_inverted_index.analysis | 96 |
| abstract_inverted_index.capacity | 166 |
| abstract_inverted_index.clamping | 81 |
| abstract_inverted_index.commonly | 47 |
| abstract_inverted_index.cutting, | 205 |
| abstract_inverted_index.cutting. | 36 |
| abstract_inverted_index.designed | 68 |
| abstract_inverted_index.feasible | 221 |
| abstract_inverted_index.improved | 184 |
| abstract_inverted_index.internal | 100 |
| abstract_inverted_index.problems | 25 |
| abstract_inverted_index.proposed | 60 |
| abstract_inverted_index.relevant | 138 |
| abstract_inverted_index.schemes, | 136 |
| abstract_inverted_index.software | 72 |
| abstract_inverted_index.solution | 222 |
| abstract_inverted_index.specific | 208 |
| abstract_inverted_index.automated | 41, 125 |
| abstract_inverted_index.automatic | 80, 112 |
| abstract_inverted_index.compared. | 62 |
| abstract_inverted_index.designed. | 89 |
| abstract_inverted_index.efficient | 56 |
| abstract_inverted_index.optimized | 64, 76, 134 |
| abstract_inverted_index.products, | 12, 218 |
| abstract_inverted_index.prototype | 120, 127, 149 |
| abstract_inverted_index.providing | 219 |
| abstract_inverted_index.sections, | 17 |
| abstract_inverted_index.segmented | 15 |
| abstract_inverted_index.SolidWorks | 71 |
| abstract_inverted_index.Therefore, | 193 |
| abstract_inverted_index.addressing | 1 |
| abstract_inverted_index.components | 101 |
| abstract_inverted_index.conducted. | 143 |
| abstract_inverted_index.decreased. | 192 |
| abstract_inverted_index.efficiency | 181 |
| abstract_inverted_index.equipment. | 228 |
| abstract_inverted_index.fabricated | 129 |
| abstract_inverted_index.intensity, | 30 |
| abstract_inverted_index.processing | 165, 209 |
| abstract_inverted_index.structural | 92 |
| abstract_inverted_index.calculation | 95 |
| abstract_inverted_index.efficiency, | 33 |
| abstract_inverted_index.operations, | 22 |
| abstract_inverted_index.processing, | 204 |
| abstract_inverted_index.manufactured | 196 |
| abstract_inverted_index.requirements | 210 |
| abstract_inverted_index.transmission | 83 |
| abstract_inverted_index.Subsequently, | 90 |
| abstract_inverted_index.manufactured. | 122 |
| abstract_inverted_index.manufacturing | 227 |
| abstract_inverted_index.significantly | 191 |
| abstract_inverted_index.above-mentioned | 133 |
| abstract_inverted_index.three-dimensional | 108 |
| cited_by_percentile_year | |
| corresponding_author_ids | https://openalex.org/A5102848124 |
| countries_distinct_count | 1 |
| institutions_distinct_count | 3 |
| corresponding_institution_ids | https://openalex.org/I14116566 |
| citation_normalized_percentile |