The Influence of High Temperature Loading on the Structure of Fine Al Powder Compacts Article Swipe
Ernest Gondár
,
Pavol Sejč
,
Alexander Schrek
·
YOU?
·
· 2015
· Open Access
·
· DOI: https://doi.org/10.21062/ujep/x.2015/a/1213-2489/mt/15/1/31
YOU?
·
· 2015
· Open Access
·
· DOI: https://doi.org/10.21062/ujep/x.2015/a/1213-2489/mt/15/1/31
Aluminum specimens for pilot resistance testing at higher temperature and mechanical loading were prepared by means of powder metallurgy. The aluminum powders with nanooxide surface layers were prepared. The tests were performed at 300°C and applied stress of 100, 125, 150, 175 MPa and at temperatures 350°C and 400°C and stress of 100 MPa. Aluminum specimens tested at 300°C and stresses of 100 and 125 MPa were characterized by very high resistance. Similar resistance was exhibited by specimens tested at 350°C and 100 MPa. The rupture of specimens tested at 350°C at 150 and 175 MPa was initiated mainly from surface defects. By aluminum tests at temperatures below 400°C, compact oxide layer was not disturbed. Oxide layer fragmentation at 400°C resulted in lower resistance of aluminum specimens. The resistance increase was accompanied by higher portion of ductile fracture with dimpled morphology. Large angle grains size was not changed. Higher temperatures and stresses cause dislocation netting on grain boundaries and initiate subgrains formation.
Related Topics
Concepts
Metadata
- Type
- article
- Language
- en
- Landing Page
- https://doi.org/10.21062/ujep/x.2015/a/1213-2489/mt/15/1/31
- http://journalmt.com/doi/10.21062/ujep/x.2015/a/1213-2489/MT/15/1/31.pdf
- OA Status
- diamond
- Cited By
- 1
- References
- 7
- Related Works
- 10
- OpenAlex ID
- https://openalex.org/W3033321946
All OpenAlex metadata
Raw OpenAlex JSON
- OpenAlex ID
-
https://openalex.org/W3033321946Canonical identifier for this work in OpenAlex
- DOI
-
https://doi.org/10.21062/ujep/x.2015/a/1213-2489/mt/15/1/31Digital Object Identifier
- Title
-
The Influence of High Temperature Loading on the Structure of Fine Al Powder CompactsWork title
- Type
-
articleOpenAlex work type
- Language
-
enPrimary language
- Publication year
-
2015Year of publication
- Publication date
-
2015-02-01Full publication date if available
- Authors
-
Ernest Gondár, Pavol Sejč, Alexander SchrekList of authors in order
- Landing page
-
https://doi.org/10.21062/ujep/x.2015/a/1213-2489/mt/15/1/31Publisher landing page
- PDF URL
-
https://journalmt.com/doi/10.21062/ujep/x.2015/a/1213-2489/MT/15/1/31.pdfDirect link to full text PDF
- Open access
-
YesWhether a free full text is available
- OA status
-
diamondOpen access status per OpenAlex
- OA URL
-
https://journalmt.com/doi/10.21062/ujep/x.2015/a/1213-2489/MT/15/1/31.pdfDirect OA link when available
- Concepts
-
Materials science, Aluminium, Metallurgy, Composite material, Powder metallurgy, Oxide, Grain size, Dislocation, Layer (electronics), MicrostructureTop concepts (fields/topics) attached by OpenAlex
- Cited by
-
1Total citation count in OpenAlex
- Citations by year (recent)
-
2015: 1Per-year citation counts (last 5 years)
- References (count)
-
7Number of works referenced by this work
- Related works (count)
-
10Other works algorithmically related by OpenAlex
Full payload
| id | https://openalex.org/W3033321946 |
|---|---|
| doi | https://doi.org/10.21062/ujep/x.2015/a/1213-2489/mt/15/1/31 |
| ids.doi | https://doi.org/10.21062/ujep/x.2015/a/1213-2489/mt/15/1/31 |
| ids.mag | 3033321946 |
| ids.openalex | https://openalex.org/W3033321946 |
| fwci | 0.2965266 |
| type | article |
| title | The Influence of High Temperature Loading on the Structure of Fine Al Powder Compacts |
| biblio.issue | 1 |
| biblio.volume | 15 |
| biblio.last_page | 35 |
| biblio.first_page | 31 |
| topics[0].id | https://openalex.org/T10717 |
| topics[0].field.id | https://openalex.org/fields/22 |
| topics[0].field.display_name | Engineering |
| topics[0].score | 0.9998000264167786 |
| topics[0].domain.id | https://openalex.org/domains/3 |
| topics[0].domain.display_name | Physical Sciences |
| topics[0].subfield.id | https://openalex.org/subfields/2210 |
| topics[0].subfield.display_name | Mechanical Engineering |
| topics[0].display_name | Aluminum Alloys Composites Properties |
| topics[1].id | https://openalex.org/T10204 |
| topics[1].field.id | https://openalex.org/fields/25 |
| topics[1].field.display_name | Materials Science |
| topics[1].score | 0.9991999864578247 |
| topics[1].domain.id | https://openalex.org/domains/3 |
| topics[1].domain.display_name | Physical Sciences |
| topics[1].subfield.id | https://openalex.org/subfields/2505 |
| topics[1].subfield.display_name | Materials Chemistry |
| topics[1].display_name | Microstructure and mechanical properties |
| topics[2].id | https://openalex.org/T11699 |
| topics[2].field.id | https://openalex.org/fields/25 |
| topics[2].field.display_name | Materials Science |
| topics[2].score | 0.9987000226974487 |
| topics[2].domain.id | https://openalex.org/domains/3 |
| topics[2].domain.display_name | Physical Sciences |
| topics[2].subfield.id | https://openalex.org/subfields/2505 |
| topics[2].subfield.display_name | Materials Chemistry |
| topics[2].display_name | High-Velocity Impact and Material Behavior |
| is_xpac | False |
| apc_list | |
| apc_paid | |
| concepts[0].id | https://openalex.org/C192562407 |
| concepts[0].level | 0 |
| concepts[0].score | 0.8895830512046814 |
| concepts[0].wikidata | https://www.wikidata.org/wiki/Q228736 |
| concepts[0].display_name | Materials science |
| concepts[1].id | https://openalex.org/C513153333 |
| concepts[1].level | 2 |
| concepts[1].score | 0.69924396276474 |
| concepts[1].wikidata | https://www.wikidata.org/wiki/Q663 |
| concepts[1].display_name | Aluminium |
| concepts[2].id | https://openalex.org/C191897082 |
| concepts[2].level | 1 |
| concepts[2].score | 0.6291266679763794 |
| concepts[2].wikidata | https://www.wikidata.org/wiki/Q11467 |
| concepts[2].display_name | Metallurgy |
| concepts[3].id | https://openalex.org/C159985019 |
| concepts[3].level | 1 |
| concepts[3].score | 0.5183966755867004 |
| concepts[3].wikidata | https://www.wikidata.org/wiki/Q181790 |
| concepts[3].display_name | Composite material |
| concepts[4].id | https://openalex.org/C7794659 |
| concepts[4].level | 3 |
| concepts[4].score | 0.5125634670257568 |
| concepts[4].wikidata | https://www.wikidata.org/wiki/Q726605 |
| concepts[4].display_name | Powder metallurgy |
| concepts[5].id | https://openalex.org/C2779851234 |
| concepts[5].level | 2 |
| concepts[5].score | 0.44709131121635437 |
| concepts[5].wikidata | https://www.wikidata.org/wiki/Q50690 |
| concepts[5].display_name | Oxide |
| concepts[6].id | https://openalex.org/C192191005 |
| concepts[6].level | 2 |
| concepts[6].score | 0.4409210681915283 |
| concepts[6].wikidata | https://www.wikidata.org/wiki/Q466491 |
| concepts[6].display_name | Grain size |
| concepts[7].id | https://openalex.org/C159122135 |
| concepts[7].level | 2 |
| concepts[7].score | 0.4140644967556 |
| concepts[7].wikidata | https://www.wikidata.org/wiki/Q737571 |
| concepts[7].display_name | Dislocation |
| concepts[8].id | https://openalex.org/C2779227376 |
| concepts[8].level | 2 |
| concepts[8].score | 0.4133185148239136 |
| concepts[8].wikidata | https://www.wikidata.org/wiki/Q6505497 |
| concepts[8].display_name | Layer (electronics) |
| concepts[9].id | https://openalex.org/C87976508 |
| concepts[9].level | 2 |
| concepts[9].score | 0.3661693334579468 |
| concepts[9].wikidata | https://www.wikidata.org/wiki/Q1498213 |
| concepts[9].display_name | Microstructure |
| keywords[0].id | https://openalex.org/keywords/materials-science |
| keywords[0].score | 0.8895830512046814 |
| keywords[0].display_name | Materials science |
| keywords[1].id | https://openalex.org/keywords/aluminium |
| keywords[1].score | 0.69924396276474 |
| keywords[1].display_name | Aluminium |
| keywords[2].id | https://openalex.org/keywords/metallurgy |
| keywords[2].score | 0.6291266679763794 |
| keywords[2].display_name | Metallurgy |
| keywords[3].id | https://openalex.org/keywords/composite-material |
| keywords[3].score | 0.5183966755867004 |
| keywords[3].display_name | Composite material |
| keywords[4].id | https://openalex.org/keywords/powder-metallurgy |
| keywords[4].score | 0.5125634670257568 |
| keywords[4].display_name | Powder metallurgy |
| keywords[5].id | https://openalex.org/keywords/oxide |
| keywords[5].score | 0.44709131121635437 |
| keywords[5].display_name | Oxide |
| keywords[6].id | https://openalex.org/keywords/grain-size |
| keywords[6].score | 0.4409210681915283 |
| keywords[6].display_name | Grain size |
| keywords[7].id | https://openalex.org/keywords/dislocation |
| keywords[7].score | 0.4140644967556 |
| keywords[7].display_name | Dislocation |
| keywords[8].id | https://openalex.org/keywords/layer |
| keywords[8].score | 0.4133185148239136 |
| keywords[8].display_name | Layer (electronics) |
| keywords[9].id | https://openalex.org/keywords/microstructure |
| keywords[9].score | 0.3661693334579468 |
| keywords[9].display_name | Microstructure |
| language | en |
| locations[0].id | doi:10.21062/ujep/x.2015/a/1213-2489/mt/15/1/31 |
| locations[0].is_oa | True |
| locations[0].source.id | https://openalex.org/S4210223146 |
| locations[0].source.issn | 1213-2489, 2787-9402 |
| locations[0].source.type | journal |
| locations[0].source.is_oa | True |
| locations[0].source.issn_l | 1213-2489 |
| locations[0].source.is_core | False |
| locations[0].source.is_in_doaj | False |
| locations[0].source.display_name | MANUFACTURING TECHNOLOGY |
| locations[0].source.host_organization | https://openalex.org/P4310314353 |
| locations[0].source.host_organization_name | Jan Evangelista Purkyně University in Ústí nad Labem |
| locations[0].source.host_organization_lineage | https://openalex.org/P4310314353 |
| locations[0].source.host_organization_lineage_names | Jan Evangelista Purkyně University in Ústí nad Labem |
| locations[0].license | |
| locations[0].pdf_url | http://journalmt.com/doi/10.21062/ujep/x.2015/a/1213-2489/MT/15/1/31.pdf |
| locations[0].version | publishedVersion |
| locations[0].raw_type | journal-article |
| locations[0].license_id | |
| locations[0].is_accepted | True |
| locations[0].is_published | True |
| locations[0].raw_source_name | Manufacturing Technology |
| locations[0].landing_page_url | https://doi.org/10.21062/ujep/x.2015/a/1213-2489/mt/15/1/31 |
| indexed_in | crossref |
| authorships[0].author.id | https://openalex.org/A5006996269 |
| authorships[0].author.orcid | |
| authorships[0].author.display_name | Ernest Gondár |
| authorships[0].countries | SK |
| authorships[0].affiliations[0].institution_ids | https://openalex.org/I110757952 |
| authorships[0].affiliations[0].raw_affiliation_string | Faculty of Mechanical Engineering, Slovak University of Technology in Bratislava. Pionierska 15, 83102 Bratislava. Slovak Republic. |
| authorships[0].institutions[0].id | https://openalex.org/I110757952 |
| authorships[0].institutions[0].ror | https://ror.org/0561ghm58 |
| authorships[0].institutions[0].type | education |
| authorships[0].institutions[0].lineage | https://openalex.org/I110757952 |
| authorships[0].institutions[0].country_code | SK |
| authorships[0].institutions[0].display_name | Slovak University of Technology in Bratislava |
| authorships[0].author_position | first |
| authorships[0].raw_author_name | Ernest Gondár |
| authorships[0].is_corresponding | True |
| authorships[0].raw_affiliation_strings | Faculty of Mechanical Engineering, Slovak University of Technology in Bratislava. Pionierska 15, 83102 Bratislava. Slovak Republic. |
| authorships[1].author.id | https://openalex.org/A5049593079 |
| authorships[1].author.orcid | https://orcid.org/0000-0001-5298-4978 |
| authorships[1].author.display_name | Pavol Sejč |
| authorships[1].countries | SK |
| authorships[1].affiliations[0].institution_ids | https://openalex.org/I110757952 |
| authorships[1].affiliations[0].raw_affiliation_string | Faculty of Mechanical Engineering, Slovak University of Technology in Bratislava. Pionierska 15, 83102 Bratislava. Slovak Republic. |
| authorships[1].institutions[0].id | https://openalex.org/I110757952 |
| authorships[1].institutions[0].ror | https://ror.org/0561ghm58 |
| authorships[1].institutions[0].type | education |
| authorships[1].institutions[0].lineage | https://openalex.org/I110757952 |
| authorships[1].institutions[0].country_code | SK |
| authorships[1].institutions[0].display_name | Slovak University of Technology in Bratislava |
| authorships[1].author_position | middle |
| authorships[1].raw_author_name | Pavol Sejč |
| authorships[1].is_corresponding | False |
| authorships[1].raw_affiliation_strings | Faculty of Mechanical Engineering, Slovak University of Technology in Bratislava. Pionierska 15, 83102 Bratislava. Slovak Republic. |
| authorships[2].author.id | https://openalex.org/A5002270515 |
| authorships[2].author.orcid | https://orcid.org/0000-0002-6971-8446 |
| authorships[2].author.display_name | Alexander Schrek |
| authorships[2].countries | SK |
| authorships[2].affiliations[0].institution_ids | https://openalex.org/I110757952 |
| authorships[2].affiliations[0].raw_affiliation_string | Faculty of Mechanical Engineering, Slovak University of Technology in Bratislava. Pionierska 15, 83102 Bratislava. Slovak Republic. |
| authorships[2].institutions[0].id | https://openalex.org/I110757952 |
| authorships[2].institutions[0].ror | https://ror.org/0561ghm58 |
| authorships[2].institutions[0].type | education |
| authorships[2].institutions[0].lineage | https://openalex.org/I110757952 |
| authorships[2].institutions[0].country_code | SK |
| authorships[2].institutions[0].display_name | Slovak University of Technology in Bratislava |
| authorships[2].author_position | last |
| authorships[2].raw_author_name | Alexander Schrek |
| authorships[2].is_corresponding | False |
| authorships[2].raw_affiliation_strings | Faculty of Mechanical Engineering, Slovak University of Technology in Bratislava. Pionierska 15, 83102 Bratislava. Slovak Republic. |
| has_content.pdf | True |
| has_content.grobid_xml | True |
| is_paratext | False |
| open_access.is_oa | True |
| open_access.oa_url | http://journalmt.com/doi/10.21062/ujep/x.2015/a/1213-2489/MT/15/1/31.pdf |
| open_access.oa_status | diamond |
| open_access.any_repository_has_fulltext | False |
| created_date | 2025-10-10T00:00:00 |
| display_name | The Influence of High Temperature Loading on the Structure of Fine Al Powder Compacts |
| has_fulltext | False |
| is_retracted | False |
| updated_date | 2025-12-05T23:21:25.405358 |
| primary_topic.id | https://openalex.org/T10717 |
| primary_topic.field.id | https://openalex.org/fields/22 |
| primary_topic.field.display_name | Engineering |
| primary_topic.score | 0.9998000264167786 |
| primary_topic.domain.id | https://openalex.org/domains/3 |
| primary_topic.domain.display_name | Physical Sciences |
| primary_topic.subfield.id | https://openalex.org/subfields/2210 |
| primary_topic.subfield.display_name | Mechanical Engineering |
| primary_topic.display_name | Aluminum Alloys Composites Properties |
| related_works | https://openalex.org/W1984782263, https://openalex.org/W2382172995, https://openalex.org/W2001314235, https://openalex.org/W1606762053, https://openalex.org/W2358030561, https://openalex.org/W4247884914, https://openalex.org/W2171564338, https://openalex.org/W2791077542, https://openalex.org/W4237955578, https://openalex.org/W2316124964 |
| cited_by_count | 1 |
| counts_by_year[0].year | 2015 |
| counts_by_year[0].cited_by_count | 1 |
| locations_count | 1 |
| best_oa_location.id | doi:10.21062/ujep/x.2015/a/1213-2489/mt/15/1/31 |
| best_oa_location.is_oa | True |
| best_oa_location.source.id | https://openalex.org/S4210223146 |
| best_oa_location.source.issn | 1213-2489, 2787-9402 |
| best_oa_location.source.type | journal |
| best_oa_location.source.is_oa | True |
| best_oa_location.source.issn_l | 1213-2489 |
| best_oa_location.source.is_core | False |
| best_oa_location.source.is_in_doaj | False |
| best_oa_location.source.display_name | MANUFACTURING TECHNOLOGY |
| best_oa_location.source.host_organization | https://openalex.org/P4310314353 |
| best_oa_location.source.host_organization_name | Jan Evangelista Purkyně University in Ústí nad Labem |
| best_oa_location.source.host_organization_lineage | https://openalex.org/P4310314353 |
| best_oa_location.source.host_organization_lineage_names | Jan Evangelista Purkyně University in Ústí nad Labem |
| best_oa_location.license | |
| best_oa_location.pdf_url | http://journalmt.com/doi/10.21062/ujep/x.2015/a/1213-2489/MT/15/1/31.pdf |
| best_oa_location.version | publishedVersion |
| best_oa_location.raw_type | journal-article |
| best_oa_location.license_id | |
| best_oa_location.is_accepted | True |
| best_oa_location.is_published | True |
| best_oa_location.raw_source_name | Manufacturing Technology |
| best_oa_location.landing_page_url | https://doi.org/10.21062/ujep/x.2015/a/1213-2489/mt/15/1/31 |
| primary_location.id | doi:10.21062/ujep/x.2015/a/1213-2489/mt/15/1/31 |
| primary_location.is_oa | True |
| primary_location.source.id | https://openalex.org/S4210223146 |
| primary_location.source.issn | 1213-2489, 2787-9402 |
| primary_location.source.type | journal |
| primary_location.source.is_oa | True |
| primary_location.source.issn_l | 1213-2489 |
| primary_location.source.is_core | False |
| primary_location.source.is_in_doaj | False |
| primary_location.source.display_name | MANUFACTURING TECHNOLOGY |
| primary_location.source.host_organization | https://openalex.org/P4310314353 |
| primary_location.source.host_organization_name | Jan Evangelista Purkyně University in Ústí nad Labem |
| primary_location.source.host_organization_lineage | https://openalex.org/P4310314353 |
| primary_location.source.host_organization_lineage_names | Jan Evangelista Purkyně University in Ústí nad Labem |
| primary_location.license | |
| primary_location.pdf_url | http://journalmt.com/doi/10.21062/ujep/x.2015/a/1213-2489/MT/15/1/31.pdf |
| primary_location.version | publishedVersion |
| primary_location.raw_type | journal-article |
| primary_location.license_id | |
| primary_location.is_accepted | True |
| primary_location.is_published | True |
| primary_location.raw_source_name | Manufacturing Technology |
| primary_location.landing_page_url | https://doi.org/10.21062/ujep/x.2015/a/1213-2489/mt/15/1/31 |
| publication_date | 2015-02-01 |
| publication_year | 2015 |
| referenced_works | https://openalex.org/W3033716434, https://openalex.org/W2037302512, https://openalex.org/W2081971315, https://openalex.org/W2037347523, https://openalex.org/W2058372733, https://openalex.org/W2010452800, https://openalex.org/W1991047053 |
| referenced_works_count | 7 |
| abstract_inverted_index.By | 102 |
| abstract_inverted_index.at | 6, 32, 44, 57, 79, 89, 91, 105, 118 |
| abstract_inverted_index.by | 14, 68, 76, 132 |
| abstract_inverted_index.in | 121 |
| abstract_inverted_index.of | 16, 37, 51, 61, 86, 124, 135 |
| abstract_inverted_index.on | 155 |
| abstract_inverted_index.100 | 52, 62, 82 |
| abstract_inverted_index.125 | 64 |
| abstract_inverted_index.150 | 92 |
| abstract_inverted_index.175 | 41, 94 |
| abstract_inverted_index.MPa | 42, 65, 95 |
| abstract_inverted_index.The | 19, 28, 84, 127 |
| abstract_inverted_index.and | 9, 34, 43, 47, 49, 59, 63, 81, 93, 150, 158 |
| abstract_inverted_index.for | 2 |
| abstract_inverted_index.not | 113, 146 |
| abstract_inverted_index.was | 74, 96, 112, 130, 145 |
| abstract_inverted_index.100, | 38 |
| abstract_inverted_index.125, | 39 |
| abstract_inverted_index.150, | 40 |
| abstract_inverted_index.MPa. | 53, 83 |
| abstract_inverted_index.from | 99 |
| abstract_inverted_index.high | 70 |
| abstract_inverted_index.size | 144 |
| abstract_inverted_index.very | 69 |
| abstract_inverted_index.were | 12, 26, 30, 66 |
| abstract_inverted_index.with | 22, 138 |
| abstract_inverted_index.Large | 141 |
| abstract_inverted_index.Oxide | 115 |
| abstract_inverted_index.angle | 142 |
| abstract_inverted_index.below | 107 |
| abstract_inverted_index.cause | 152 |
| abstract_inverted_index.grain | 156 |
| abstract_inverted_index.layer | 111, 116 |
| abstract_inverted_index.lower | 122 |
| abstract_inverted_index.means | 15 |
| abstract_inverted_index.oxide | 110 |
| abstract_inverted_index.pilot | 3 |
| abstract_inverted_index.tests | 29, 104 |
| abstract_inverted_index.300°C | 33, 58 |
| abstract_inverted_index.350°C | 46, 80, 90 |
| abstract_inverted_index.400°C | 48, 119 |
| abstract_inverted_index.Higher | 148 |
| abstract_inverted_index.grains | 143 |
| abstract_inverted_index.higher | 7, 133 |
| abstract_inverted_index.layers | 25 |
| abstract_inverted_index.mainly | 98 |
| abstract_inverted_index.powder | 17 |
| abstract_inverted_index.stress | 36, 50 |
| abstract_inverted_index.tested | 56, 78, 88 |
| abstract_inverted_index.400°C, | 108 |
| abstract_inverted_index.Similar | 72 |
| abstract_inverted_index.applied | 35 |
| abstract_inverted_index.compact | 109 |
| abstract_inverted_index.dimpled | 139 |
| abstract_inverted_index.ductile | 136 |
| abstract_inverted_index.loading | 11 |
| abstract_inverted_index.netting | 154 |
| abstract_inverted_index.portion | 134 |
| abstract_inverted_index.powders | 21 |
| abstract_inverted_index.rupture | 85 |
| abstract_inverted_index.surface | 24, 100 |
| abstract_inverted_index.testing | 5 |
| abstract_inverted_index.Aluminum | 0, 54 |
| abstract_inverted_index.aluminum | 20, 103, 125 |
| abstract_inverted_index.changed. | 147 |
| abstract_inverted_index.defects. | 101 |
| abstract_inverted_index.fracture | 137 |
| abstract_inverted_index.increase | 129 |
| abstract_inverted_index.initiate | 159 |
| abstract_inverted_index.prepared | 13 |
| abstract_inverted_index.resulted | 120 |
| abstract_inverted_index.stresses | 60, 151 |
| abstract_inverted_index.exhibited | 75 |
| abstract_inverted_index.initiated | 97 |
| abstract_inverted_index.nanooxide | 23 |
| abstract_inverted_index.performed | 31 |
| abstract_inverted_index.prepared. | 27 |
| abstract_inverted_index.specimens | 1, 55, 77, 87 |
| abstract_inverted_index.subgrains | 160 |
| abstract_inverted_index.boundaries | 157 |
| abstract_inverted_index.disturbed. | 114 |
| abstract_inverted_index.formation. | 161 |
| abstract_inverted_index.mechanical | 10 |
| abstract_inverted_index.resistance | 4, 73, 123, 128 |
| abstract_inverted_index.specimens. | 126 |
| abstract_inverted_index.accompanied | 131 |
| abstract_inverted_index.dislocation | 153 |
| abstract_inverted_index.metallurgy. | 18 |
| abstract_inverted_index.morphology. | 140 |
| abstract_inverted_index.resistance. | 71 |
| abstract_inverted_index.temperature | 8 |
| abstract_inverted_index.temperatures | 45, 106, 149 |
| abstract_inverted_index.characterized | 67 |
| abstract_inverted_index.fragmentation | 117 |
| cited_by_percentile_year.max | 94 |
| cited_by_percentile_year.min | 89 |
| corresponding_author_ids | https://openalex.org/A5006996269 |
| countries_distinct_count | 1 |
| institutions_distinct_count | 3 |
| corresponding_institution_ids | https://openalex.org/I110757952 |
| citation_normalized_percentile.value | 0.68796838 |
| citation_normalized_percentile.is_in_top_1_percent | False |
| citation_normalized_percentile.is_in_top_10_percent | False |