Weight Optimization of Plastic Injection Moulded Electrical Wire Casing Thermoplastic using Hybrid RSM-Tunicate Swarm Algorithm Article Swipe
Abhishek Barua
,
Siddharth Jeet
,
Monalin Mishra
,
Kanchan Kumari
,
Manisha Priyadarshini
,
Swastik Pradhan
,
Sumit Saha
·
YOU?
·
· 2023
· Open Access
·
· DOI: https://doi.org/10.1051/e3sconf/202345301052
YOU?
·
· 2023
· Open Access
·
· DOI: https://doi.org/10.1051/e3sconf/202345301052
The need for fire-retardant material for electrical wire covers and cases is increasing as the global population continues to expand at an alarming rate. In addition to having good fire and chemical resistance, CPVC (chlorinated polyvinyl chloride) is widely accessible in a assortment of forms and sizes, comprising rods, sheets, and tubes. Plastic injection moulding (PIM) provides a method that allows for the production of CPVC items at a rapid pace and at a low cost. When these mouldings are lightweight, they may reduce the amount of non-biodegradable materials that are used in their construction. The present research gives an insight into the CPVC material moulding for electrical wire casing elbows using an injection moulding machine, which was previously unexplored. Four plastic injection moulding parameters were considered in order to reduce the weight of the elbow, including injection pressure, mould closing speed, mould pressure, and backpressure. The 27 tests were piloted in line with Response Surface Methodbased Box-Behnken Design, and the factors were optimised using Tunicate Swarm Algorithm, which was recently developed. In the case of the plastic injection-moulded item, the analysis of variance revealed that the most significant parameter in the weight reduction was the material used. It has been determined that mould pressure is the most critical factor impacting the weight of the item when it is manufactured. As a result, the optimum manufacture of injection-moulded CPVC components will be facilitated, resulting in optimised weight while also minimising production time and raw material waste for electrical wire casing.
Related Topics
Concepts
Metadata
- Type
- article
- Language
- en
- Landing Page
- https://doi.org/10.1051/e3sconf/202345301052
- https://www.e3s-conferences.org/articles/e3sconf/pdf/2023/90/e3sconf_icsdg2023_01052.pdf
- OA Status
- diamond
- Cited By
- 2
- References
- 21
- Related Works
- 10
- OpenAlex ID
- https://openalex.org/W4389557566
All OpenAlex metadata
Raw OpenAlex JSON
- OpenAlex ID
-
https://openalex.org/W4389557566Canonical identifier for this work in OpenAlex
- DOI
-
https://doi.org/10.1051/e3sconf/202345301052Digital Object Identifier
- Title
-
Weight Optimization of Plastic Injection Moulded Electrical Wire Casing Thermoplastic using Hybrid RSM-Tunicate Swarm AlgorithmWork title
- Type
-
articleOpenAlex work type
- Language
-
enPrimary language
- Publication year
-
2023Year of publication
- Publication date
-
2023-01-01Full publication date if available
- Authors
-
Abhishek Barua, Siddharth Jeet, Monalin Mishra, Kanchan Kumari, Manisha Priyadarshini, Swastik Pradhan, Sumit SahaList of authors in order
- Landing page
-
https://doi.org/10.1051/e3sconf/202345301052Publisher landing page
- PDF URL
-
https://www.e3s-conferences.org/articles/e3sconf/pdf/2023/90/e3sconf_icsdg2023_01052.pdfDirect link to full text PDF
- Open access
-
YesWhether a free full text is available
- OA status
-
diamondOpen access status per OpenAlex
- OA URL
-
https://www.e3s-conferences.org/articles/e3sconf/pdf/2023/90/e3sconf_icsdg2023_01052.pdfDirect OA link when available
- Concepts
-
Casing, Materials science, Composite material, Injection moulding, Thermoplastic, Mechanical engineering, EngineeringTop concepts (fields/topics) attached by OpenAlex
- Cited by
-
2Total citation count in OpenAlex
- Citations by year (recent)
-
2025: 2Per-year citation counts (last 5 years)
- References (count)
-
21Number of works referenced by this work
- Related works (count)
-
10Other works algorithmically related by OpenAlex
Full payload
| id | https://openalex.org/W4389557566 |
|---|---|
| doi | https://doi.org/10.1051/e3sconf/202345301052 |
| ids.doi | https://doi.org/10.1051/e3sconf/202345301052 |
| ids.openalex | https://openalex.org/W4389557566 |
| fwci | 0.36902224 |
| type | article |
| title | Weight Optimization of Plastic Injection Moulded Electrical Wire Casing Thermoplastic using Hybrid RSM-Tunicate Swarm Algorithm |
| biblio.issue | |
| biblio.volume | 453 |
| biblio.last_page | 01052 |
| biblio.first_page | 01052 |
| topics[0].id | https://openalex.org/T12080 |
| topics[0].field.id | https://openalex.org/fields/22 |
| topics[0].field.display_name | Engineering |
| topics[0].score | 0.9991000294685364 |
| topics[0].domain.id | https://openalex.org/domains/3 |
| topics[0].domain.display_name | Physical Sciences |
| topics[0].subfield.id | https://openalex.org/subfields/2210 |
| topics[0].subfield.display_name | Mechanical Engineering |
| topics[0].display_name | Injection Molding Process and Properties |
| topics[1].id | https://openalex.org/T11159 |
| topics[1].field.id | https://openalex.org/fields/22 |
| topics[1].field.display_name | Engineering |
| topics[1].score | 0.9902999997138977 |
| topics[1].domain.id | https://openalex.org/domains/3 |
| topics[1].domain.display_name | Physical Sciences |
| topics[1].subfield.id | https://openalex.org/subfields/2209 |
| topics[1].subfield.display_name | Industrial and Manufacturing Engineering |
| topics[1].display_name | Manufacturing Process and Optimization |
| topics[2].id | https://openalex.org/T10188 |
| topics[2].field.id | https://openalex.org/fields/22 |
| topics[2].field.display_name | Engineering |
| topics[2].score | 0.9815999865531921 |
| topics[2].domain.id | https://openalex.org/domains/3 |
| topics[2].domain.display_name | Physical Sciences |
| topics[2].subfield.id | https://openalex.org/subfields/2210 |
| topics[2].subfield.display_name | Mechanical Engineering |
| topics[2].display_name | Advanced machining processes and optimization |
| is_xpac | False |
| apc_list | |
| apc_paid | |
| concepts[0].id | https://openalex.org/C30399818 |
| concepts[0].level | 2 |
| concepts[0].score | 0.6757789850234985 |
| concepts[0].wikidata | https://www.wikidata.org/wiki/Q5048830 |
| concepts[0].display_name | Casing |
| concepts[1].id | https://openalex.org/C192562407 |
| concepts[1].level | 0 |
| concepts[1].score | 0.6582868695259094 |
| concepts[1].wikidata | https://www.wikidata.org/wiki/Q228736 |
| concepts[1].display_name | Materials science |
| concepts[2].id | https://openalex.org/C159985019 |
| concepts[2].level | 1 |
| concepts[2].score | 0.5858348608016968 |
| concepts[2].wikidata | https://www.wikidata.org/wiki/Q181790 |
| concepts[2].display_name | Composite material |
| concepts[3].id | https://openalex.org/C2778993590 |
| concepts[3].level | 2 |
| concepts[3].score | 0.5418033003807068 |
| concepts[3].wikidata | https://www.wikidata.org/wiki/Q260606 |
| concepts[3].display_name | Injection moulding |
| concepts[4].id | https://openalex.org/C2781247691 |
| concepts[4].level | 2 |
| concepts[4].score | 0.5300585627555847 |
| concepts[4].wikidata | https://www.wikidata.org/wiki/Q380677 |
| concepts[4].display_name | Thermoplastic |
| concepts[5].id | https://openalex.org/C78519656 |
| concepts[5].level | 1 |
| concepts[5].score | 0.28100061416625977 |
| concepts[5].wikidata | https://www.wikidata.org/wiki/Q101333 |
| concepts[5].display_name | Mechanical engineering |
| concepts[6].id | https://openalex.org/C127413603 |
| concepts[6].level | 0 |
| concepts[6].score | 0.2299652397632599 |
| concepts[6].wikidata | https://www.wikidata.org/wiki/Q11023 |
| concepts[6].display_name | Engineering |
| keywords[0].id | https://openalex.org/keywords/casing |
| keywords[0].score | 0.6757789850234985 |
| keywords[0].display_name | Casing |
| keywords[1].id | https://openalex.org/keywords/materials-science |
| keywords[1].score | 0.6582868695259094 |
| keywords[1].display_name | Materials science |
| keywords[2].id | https://openalex.org/keywords/composite-material |
| keywords[2].score | 0.5858348608016968 |
| keywords[2].display_name | Composite material |
| keywords[3].id | https://openalex.org/keywords/injection-moulding |
| keywords[3].score | 0.5418033003807068 |
| keywords[3].display_name | Injection moulding |
| keywords[4].id | https://openalex.org/keywords/thermoplastic |
| keywords[4].score | 0.5300585627555847 |
| keywords[4].display_name | Thermoplastic |
| keywords[5].id | https://openalex.org/keywords/mechanical-engineering |
| keywords[5].score | 0.28100061416625977 |
| keywords[5].display_name | Mechanical engineering |
| keywords[6].id | https://openalex.org/keywords/engineering |
| keywords[6].score | 0.2299652397632599 |
| keywords[6].display_name | Engineering |
| language | en |
| locations[0].id | doi:10.1051/e3sconf/202345301052 |
| locations[0].is_oa | True |
| locations[0].source.id | https://openalex.org/S4210186093 |
| locations[0].source.issn | 2267-1242, 2555-0403 |
| locations[0].source.type | journal |
| locations[0].source.is_oa | True |
| locations[0].source.issn_l | 2267-1242 |
| locations[0].source.is_core | False |
| locations[0].source.is_in_doaj | True |
| locations[0].source.display_name | E3S Web of Conferences |
| locations[0].source.host_organization | https://openalex.org/P4310319748 |
| locations[0].source.host_organization_name | EDP Sciences |
| locations[0].source.host_organization_lineage | https://openalex.org/P4310319748 |
| locations[0].source.host_organization_lineage_names | EDP Sciences |
| locations[0].license | cc-by |
| locations[0].pdf_url | https://www.e3s-conferences.org/articles/e3sconf/pdf/2023/90/e3sconf_icsdg2023_01052.pdf |
| locations[0].version | publishedVersion |
| locations[0].raw_type | journal-article |
| locations[0].license_id | https://openalex.org/licenses/cc-by |
| locations[0].is_accepted | True |
| locations[0].is_published | True |
| locations[0].raw_source_name | E3S Web of Conferences |
| locations[0].landing_page_url | https://doi.org/10.1051/e3sconf/202345301052 |
| locations[1].id | pmh:oai:doaj.org/article:c48d0faa068145b8938c395207b9a690 |
| locations[1].is_oa | False |
| locations[1].source.id | https://openalex.org/S4306401280 |
| locations[1].source.issn | |
| locations[1].source.type | repository |
| locations[1].source.is_oa | False |
| locations[1].source.issn_l | |
| locations[1].source.is_core | False |
| locations[1].source.is_in_doaj | False |
| locations[1].source.display_name | DOAJ (DOAJ: Directory of Open Access Journals) |
| locations[1].source.host_organization | |
| locations[1].source.host_organization_name | |
| locations[1].license | |
| locations[1].pdf_url | |
| locations[1].version | submittedVersion |
| locations[1].raw_type | article |
| locations[1].license_id | |
| locations[1].is_accepted | False |
| locations[1].is_published | False |
| locations[1].raw_source_name | E3S Web of Conferences, Vol 453, p 01052 (2023) |
| locations[1].landing_page_url | https://doaj.org/article/c48d0faa068145b8938c395207b9a690 |
| locations[2].id | pmh:oai:edpsciences.org:dkey/10.1051/e3sconf/202345301052 |
| locations[2].is_oa | False |
| locations[2].source.id | https://openalex.org/S4306400744 |
| locations[2].source.issn | |
| locations[2].source.type | repository |
| locations[2].source.is_oa | False |
| locations[2].source.issn_l | |
| locations[2].source.is_core | False |
| locations[2].source.is_in_doaj | False |
| locations[2].source.display_name | Springer Link (Chiba Institute of Technology) |
| locations[2].source.host_organization | https://openalex.org/I8488066 |
| locations[2].source.host_organization_name | Chiba Institute of Technology |
| locations[2].source.host_organization_lineage | https://openalex.org/I8488066 |
| locations[2].license | |
| locations[2].pdf_url | |
| locations[2].version | submittedVersion |
| locations[2].raw_type | Text |
| locations[2].license_id | |
| locations[2].is_accepted | False |
| locations[2].is_published | False |
| locations[2].raw_source_name | https://doi.org/10.1051/e3sconf/202345301052 |
| locations[2].landing_page_url | |
| indexed_in | crossref, doaj |
| authorships[0].author.id | https://openalex.org/A5078090491 |
| authorships[0].author.orcid | https://orcid.org/0000-0001-5700-7949 |
| authorships[0].author.display_name | Abhishek Barua |
| authorships[0].countries | IN |
| authorships[0].affiliations[0].institution_ids | https://openalex.org/I4210107015 |
| authorships[0].affiliations[0].raw_affiliation_string | Department of Advanced Materials Technology, CSIR-Institute of Minerals and Materials Technology, Bhubaneswar, Odisha, India |
| authorships[0].affiliations[1].institution_ids | https://openalex.org/I99364266 |
| authorships[0].affiliations[1].raw_affiliation_string | Academy of Scientific and Innovative Research, CSIR-HRD Centre Campus, Ghaziabad, Uttar Pradesh, India |
| authorships[0].institutions[0].id | https://openalex.org/I99364266 |
| authorships[0].institutions[0].ror | https://ror.org/053rcsq61 |
| authorships[0].institutions[0].type | education |
| authorships[0].institutions[0].lineage | https://openalex.org/I99364266 |
| authorships[0].institutions[0].country_code | IN |
| authorships[0].institutions[0].display_name | Academy of Scientific and Innovative Research |
| authorships[0].institutions[1].id | https://openalex.org/I4210107015 |
| authorships[0].institutions[1].ror | https://ror.org/01g7qth32 |
| authorships[0].institutions[1].type | facility |
| authorships[0].institutions[1].lineage | https://openalex.org/I2799351866, https://openalex.org/I4210107015, https://openalex.org/I4210134808, https://openalex.org/I66760702 |
| authorships[0].institutions[1].country_code | IN |
| authorships[0].institutions[1].display_name | Institute of Minerals and Materials Technology |
| authorships[0].author_position | first |
| authorships[0].raw_author_name | Abhishek Barua |
| authorships[0].is_corresponding | False |
| authorships[0].raw_affiliation_strings | Academy of Scientific and Innovative Research, CSIR-HRD Centre Campus, Ghaziabad, Uttar Pradesh, India, Department of Advanced Materials Technology, CSIR-Institute of Minerals and Materials Technology, Bhubaneswar, Odisha, India |
| authorships[1].author.id | https://openalex.org/A5068154718 |
| authorships[1].author.orcid | https://orcid.org/0000-0003-2791-901X |
| authorships[1].author.display_name | Siddharth Jeet |
| authorships[1].countries | IN |
| authorships[1].affiliations[0].institution_ids | https://openalex.org/I99364266 |
| authorships[1].affiliations[0].raw_affiliation_string | Academy of Scientific and Innovative Research, CSIR-HRD Centre Campus, Ghaziabad, Uttar Pradesh, India |
| authorships[1].affiliations[1].institution_ids | https://openalex.org/I4210107015 |
| authorships[1].affiliations[1].raw_affiliation_string | Department of Advanced Materials Technology, CSIR-Institute of Minerals and Materials Technology, Bhubaneswar, Odisha, India |
| authorships[1].institutions[0].id | https://openalex.org/I99364266 |
| authorships[1].institutions[0].ror | https://ror.org/053rcsq61 |
| authorships[1].institutions[0].type | education |
| authorships[1].institutions[0].lineage | https://openalex.org/I99364266 |
| authorships[1].institutions[0].country_code | IN |
| authorships[1].institutions[0].display_name | Academy of Scientific and Innovative Research |
| authorships[1].institutions[1].id | https://openalex.org/I4210107015 |
| authorships[1].institutions[1].ror | https://ror.org/01g7qth32 |
| authorships[1].institutions[1].type | facility |
| authorships[1].institutions[1].lineage | https://openalex.org/I2799351866, https://openalex.org/I4210107015, https://openalex.org/I4210134808, https://openalex.org/I66760702 |
| authorships[1].institutions[1].country_code | IN |
| authorships[1].institutions[1].display_name | Institute of Minerals and Materials Technology |
| authorships[1].author_position | middle |
| authorships[1].raw_author_name | Siddharth Jeet |
| authorships[1].is_corresponding | False |
| authorships[1].raw_affiliation_strings | Academy of Scientific and Innovative Research, CSIR-HRD Centre Campus, Ghaziabad, Uttar Pradesh, India, Department of Advanced Materials Technology, CSIR-Institute of Minerals and Materials Technology, Bhubaneswar, Odisha, India |
| authorships[2].author.id | https://openalex.org/A5082998548 |
| authorships[2].author.orcid | https://orcid.org/0009-0008-6461-4542 |
| authorships[2].author.display_name | Monalin Mishra |
| authorships[2].countries | IN |
| authorships[2].affiliations[0].institution_ids | https://openalex.org/I4210107015 |
| authorships[2].affiliations[0].raw_affiliation_string | Environment & Sustainability Department, CSIR-Institute of Minerals & Materials Technology, Bhubaneswar, Odisha, India |
| authorships[2].affiliations[1].institution_ids | https://openalex.org/I99364266 |
| authorships[2].affiliations[1].raw_affiliation_string | Academy of Scientific and Innovative Research, CSIR-HRD Centre Campus, Ghaziabad, Uttar Pradesh, India |
| authorships[2].institutions[0].id | https://openalex.org/I99364266 |
| authorships[2].institutions[0].ror | https://ror.org/053rcsq61 |
| authorships[2].institutions[0].type | education |
| authorships[2].institutions[0].lineage | https://openalex.org/I99364266 |
| authorships[2].institutions[0].country_code | IN |
| authorships[2].institutions[0].display_name | Academy of Scientific and Innovative Research |
| authorships[2].institutions[1].id | https://openalex.org/I4210107015 |
| authorships[2].institutions[1].ror | https://ror.org/01g7qth32 |
| authorships[2].institutions[1].type | facility |
| authorships[2].institutions[1].lineage | https://openalex.org/I2799351866, https://openalex.org/I4210107015, https://openalex.org/I4210134808, https://openalex.org/I66760702 |
| authorships[2].institutions[1].country_code | IN |
| authorships[2].institutions[1].display_name | Institute of Minerals and Materials Technology |
| authorships[2].author_position | middle |
| authorships[2].raw_author_name | Monalin Mishra |
| authorships[2].is_corresponding | False |
| authorships[2].raw_affiliation_strings | Academy of Scientific and Innovative Research, CSIR-HRD Centre Campus, Ghaziabad, Uttar Pradesh, India, Environment & Sustainability Department, CSIR-Institute of Minerals & Materials Technology, Bhubaneswar, Odisha, India |
| authorships[3].author.id | https://openalex.org/A5027851535 |
| authorships[3].author.orcid | https://orcid.org/0000-0003-0104-9490 |
| authorships[3].author.display_name | Kanchan Kumari |
| authorships[3].countries | IN |
| authorships[3].affiliations[0].institution_ids | https://openalex.org/I2799452066 |
| authorships[3].affiliations[0].raw_affiliation_string | Department of Mechanical Engineering, Parala Maharaja Engineering College, Berhampur, Odisha, India |
| authorships[3].institutions[0].id | https://openalex.org/I2799452066 |
| authorships[3].institutions[0].ror | https://ror.org/034pbde03 |
| authorships[3].institutions[0].type | education |
| authorships[3].institutions[0].lineage | https://openalex.org/I2799452066, https://openalex.org/I33585257 |
| authorships[3].institutions[0].country_code | IN |
| authorships[3].institutions[0].display_name | Maharaja Engineering College |
| authorships[3].author_position | middle |
| authorships[3].raw_author_name | Kanchan Kumari |
| authorships[3].is_corresponding | False |
| authorships[3].raw_affiliation_strings | Department of Mechanical Engineering, Parala Maharaja Engineering College, Berhampur, Odisha, India |
| authorships[4].author.id | https://openalex.org/A5002654948 |
| authorships[4].author.orcid | https://orcid.org/0000-0003-2981-7092 |
| authorships[4].author.display_name | Manisha Priyadarshini |
| authorships[4].countries | IN |
| authorships[4].affiliations[0].institution_ids | https://openalex.org/I59270414 |
| authorships[4].affiliations[0].raw_affiliation_string | Department of Materials Engineering, Indian Institute of Science, Bengaluru, Karnataka, India |
| authorships[4].institutions[0].id | https://openalex.org/I59270414 |
| authorships[4].institutions[0].ror | https://ror.org/04dese585 |
| authorships[4].institutions[0].type | education |
| authorships[4].institutions[0].lineage | https://openalex.org/I59270414 |
| authorships[4].institutions[0].country_code | IN |
| authorships[4].institutions[0].display_name | Indian Institute of Science Bangalore |
| authorships[4].author_position | middle |
| authorships[4].raw_author_name | Manisha Priyadarshini |
| authorships[4].is_corresponding | False |
| authorships[4].raw_affiliation_strings | Department of Materials Engineering, Indian Institute of Science, Bengaluru, Karnataka, India |
| authorships[5].author.id | https://openalex.org/A5088429580 |
| authorships[5].author.orcid | https://orcid.org/0000-0002-0434-3196 |
| authorships[5].author.display_name | Swastik Pradhan |
| authorships[5].countries | IN |
| authorships[5].affiliations[0].institution_ids | https://openalex.org/I110360157 |
| authorships[5].affiliations[0].raw_affiliation_string | School of Mechanical Engineering, Lovely Professional University, Phagwara, Punjab, India |
| authorships[5].institutions[0].id | https://openalex.org/I110360157 |
| authorships[5].institutions[0].ror | https://ror.org/00et6q107 |
| authorships[5].institutions[0].type | education |
| authorships[5].institutions[0].lineage | https://openalex.org/I110360157 |
| authorships[5].institutions[0].country_code | IN |
| authorships[5].institutions[0].display_name | Lovely Professional University |
| authorships[5].author_position | middle |
| authorships[5].raw_author_name | Swastik Pradhan |
| authorships[5].is_corresponding | False |
| authorships[5].raw_affiliation_strings | School of Mechanical Engineering, Lovely Professional University, Phagwara, Punjab, India |
| authorships[6].author.id | https://openalex.org/A5028027610 |
| authorships[6].author.orcid | https://orcid.org/0000-0002-7081-9965 |
| authorships[6].author.display_name | Sumit Saha |
| authorships[6].countries | IN |
| authorships[6].affiliations[0].institution_ids | https://openalex.org/I99364266 |
| authorships[6].affiliations[0].raw_affiliation_string | Academy of Scientific and Innovative Research, CSIR-HRD Centre Campus, Ghaziabad, Uttar Pradesh, India |
| authorships[6].affiliations[1].institution_ids | https://openalex.org/I4210107015 |
| authorships[6].affiliations[1].raw_affiliation_string | Materials Chemistry Department, CSIR-Institute of Minerals & Materials Technology, Bhubaneswar, Odisha, India. |
| authorships[6].institutions[0].id | https://openalex.org/I99364266 |
| authorships[6].institutions[0].ror | https://ror.org/053rcsq61 |
| authorships[6].institutions[0].type | education |
| authorships[6].institutions[0].lineage | https://openalex.org/I99364266 |
| authorships[6].institutions[0].country_code | IN |
| authorships[6].institutions[0].display_name | Academy of Scientific and Innovative Research |
| authorships[6].institutions[1].id | https://openalex.org/I4210107015 |
| authorships[6].institutions[1].ror | https://ror.org/01g7qth32 |
| authorships[6].institutions[1].type | facility |
| authorships[6].institutions[1].lineage | https://openalex.org/I2799351866, https://openalex.org/I4210107015, https://openalex.org/I4210134808, https://openalex.org/I66760702 |
| authorships[6].institutions[1].country_code | IN |
| authorships[6].institutions[1].display_name | Institute of Minerals and Materials Technology |
| authorships[6].author_position | last |
| authorships[6].raw_author_name | Sumit Saha |
| authorships[6].is_corresponding | False |
| authorships[6].raw_affiliation_strings | Academy of Scientific and Innovative Research, CSIR-HRD Centre Campus, Ghaziabad, Uttar Pradesh, India, Materials Chemistry Department, CSIR-Institute of Minerals & Materials Technology, Bhubaneswar, Odisha, India. |
| has_content.pdf | True |
| has_content.grobid_xml | True |
| is_paratext | False |
| open_access.is_oa | True |
| open_access.oa_url | https://www.e3s-conferences.org/articles/e3sconf/pdf/2023/90/e3sconf_icsdg2023_01052.pdf |
| open_access.oa_status | diamond |
| open_access.any_repository_has_fulltext | False |
| created_date | 2025-10-10T00:00:00 |
| display_name | Weight Optimization of Plastic Injection Moulded Electrical Wire Casing Thermoplastic using Hybrid RSM-Tunicate Swarm Algorithm |
| has_fulltext | True |
| is_retracted | False |
| updated_date | 2025-11-06T03:46:38.306776 |
| primary_topic.id | https://openalex.org/T12080 |
| primary_topic.field.id | https://openalex.org/fields/22 |
| primary_topic.field.display_name | Engineering |
| primary_topic.score | 0.9991000294685364 |
| primary_topic.domain.id | https://openalex.org/domains/3 |
| primary_topic.domain.display_name | Physical Sciences |
| primary_topic.subfield.id | https://openalex.org/subfields/2210 |
| primary_topic.subfield.display_name | Mechanical Engineering |
| primary_topic.display_name | Injection Molding Process and Properties |
| related_works | https://openalex.org/W3146019719, https://openalex.org/W2556716750, https://openalex.org/W2964394553, https://openalex.org/W187920062, https://openalex.org/W2771937232, https://openalex.org/W4238953270, https://openalex.org/W4238947618, https://openalex.org/W4236777883, https://openalex.org/W4312291886, https://openalex.org/W2118024006 |
| cited_by_count | 2 |
| counts_by_year[0].year | 2025 |
| counts_by_year[0].cited_by_count | 2 |
| locations_count | 3 |
| best_oa_location.id | doi:10.1051/e3sconf/202345301052 |
| best_oa_location.is_oa | True |
| best_oa_location.source.id | https://openalex.org/S4210186093 |
| best_oa_location.source.issn | 2267-1242, 2555-0403 |
| best_oa_location.source.type | journal |
| best_oa_location.source.is_oa | True |
| best_oa_location.source.issn_l | 2267-1242 |
| best_oa_location.source.is_core | False |
| best_oa_location.source.is_in_doaj | True |
| best_oa_location.source.display_name | E3S Web of Conferences |
| best_oa_location.source.host_organization | https://openalex.org/P4310319748 |
| best_oa_location.source.host_organization_name | EDP Sciences |
| best_oa_location.source.host_organization_lineage | https://openalex.org/P4310319748 |
| best_oa_location.source.host_organization_lineage_names | EDP Sciences |
| best_oa_location.license | cc-by |
| best_oa_location.pdf_url | https://www.e3s-conferences.org/articles/e3sconf/pdf/2023/90/e3sconf_icsdg2023_01052.pdf |
| best_oa_location.version | publishedVersion |
| best_oa_location.raw_type | journal-article |
| best_oa_location.license_id | https://openalex.org/licenses/cc-by |
| best_oa_location.is_accepted | True |
| best_oa_location.is_published | True |
| best_oa_location.raw_source_name | E3S Web of Conferences |
| best_oa_location.landing_page_url | https://doi.org/10.1051/e3sconf/202345301052 |
| primary_location.id | doi:10.1051/e3sconf/202345301052 |
| primary_location.is_oa | True |
| primary_location.source.id | https://openalex.org/S4210186093 |
| primary_location.source.issn | 2267-1242, 2555-0403 |
| primary_location.source.type | journal |
| primary_location.source.is_oa | True |
| primary_location.source.issn_l | 2267-1242 |
| primary_location.source.is_core | False |
| primary_location.source.is_in_doaj | True |
| primary_location.source.display_name | E3S Web of Conferences |
| primary_location.source.host_organization | https://openalex.org/P4310319748 |
| primary_location.source.host_organization_name | EDP Sciences |
| primary_location.source.host_organization_lineage | https://openalex.org/P4310319748 |
| primary_location.source.host_organization_lineage_names | EDP Sciences |
| primary_location.license | cc-by |
| primary_location.pdf_url | https://www.e3s-conferences.org/articles/e3sconf/pdf/2023/90/e3sconf_icsdg2023_01052.pdf |
| primary_location.version | publishedVersion |
| primary_location.raw_type | journal-article |
| primary_location.license_id | https://openalex.org/licenses/cc-by |
| primary_location.is_accepted | True |
| primary_location.is_published | True |
| primary_location.raw_source_name | E3S Web of Conferences |
| primary_location.landing_page_url | https://doi.org/10.1051/e3sconf/202345301052 |
| publication_date | 2023-01-01 |
| publication_year | 2023 |
| referenced_works | https://openalex.org/W2793850962, https://openalex.org/W2966069268, https://openalex.org/W2800243960, https://openalex.org/W2801950993, https://openalex.org/W2954599698, https://openalex.org/W3037335451, https://openalex.org/W2955394198, https://openalex.org/W3023731525, https://openalex.org/W4293206889, https://openalex.org/W4321372227, https://openalex.org/W4321501191, https://openalex.org/W3204425261, https://openalex.org/W2055334858, https://openalex.org/W125288107, https://openalex.org/W2169547954, https://openalex.org/W4323075598, https://openalex.org/W4307960556, https://openalex.org/W3164948617, https://openalex.org/W2982359202, https://openalex.org/W3007907254, https://openalex.org/W2761330267 |
| referenced_works_count | 21 |
| abstract_inverted_index.a | 41, 57, 68, 73, 221 |
| abstract_inverted_index.27 | 147 |
| abstract_inverted_index.As | 220 |
| abstract_inverted_index.In | 24, 172 |
| abstract_inverted_index.It | 198 |
| abstract_inverted_index.an | 21, 99, 112 |
| abstract_inverted_index.as | 13 |
| abstract_inverted_index.at | 20, 67, 72 |
| abstract_inverted_index.be | 231 |
| abstract_inverted_index.in | 40, 92, 127, 151, 190, 234 |
| abstract_inverted_index.is | 11, 37, 205, 218 |
| abstract_inverted_index.it | 217 |
| abstract_inverted_index.of | 43, 64, 86, 133, 175, 182, 213, 226 |
| abstract_inverted_index.to | 18, 26, 129 |
| abstract_inverted_index.The | 0, 95, 146 |
| abstract_inverted_index.and | 9, 30, 45, 50, 71, 144, 159, 242 |
| abstract_inverted_index.are | 79, 90 |
| abstract_inverted_index.for | 2, 5, 61, 106, 246 |
| abstract_inverted_index.has | 199 |
| abstract_inverted_index.low | 74 |
| abstract_inverted_index.may | 82 |
| abstract_inverted_index.raw | 243 |
| abstract_inverted_index.the | 14, 62, 84, 102, 131, 134, 160, 173, 176, 180, 186, 191, 195, 206, 211, 214, 223 |
| abstract_inverted_index.was | 117, 169, 194 |
| abstract_inverted_index.CPVC | 33, 65, 103, 228 |
| abstract_inverted_index.Four | 120 |
| abstract_inverted_index.When | 76 |
| abstract_inverted_index.also | 238 |
| abstract_inverted_index.been | 200 |
| abstract_inverted_index.case | 174 |
| abstract_inverted_index.fire | 29 |
| abstract_inverted_index.good | 28 |
| abstract_inverted_index.into | 101 |
| abstract_inverted_index.item | 215 |
| abstract_inverted_index.line | 152 |
| abstract_inverted_index.most | 187, 207 |
| abstract_inverted_index.need | 1 |
| abstract_inverted_index.pace | 70 |
| abstract_inverted_index.that | 59, 89, 185, 202 |
| abstract_inverted_index.they | 81 |
| abstract_inverted_index.time | 241 |
| abstract_inverted_index.used | 91 |
| abstract_inverted_index.were | 125, 149, 162 |
| abstract_inverted_index.when | 216 |
| abstract_inverted_index.will | 230 |
| abstract_inverted_index.wire | 7, 108, 248 |
| abstract_inverted_index.with | 153 |
| abstract_inverted_index.(PIM) | 55 |
| abstract_inverted_index.Swarm | 166 |
| abstract_inverted_index.cases | 10 |
| abstract_inverted_index.cost. | 75 |
| abstract_inverted_index.forms | 44 |
| abstract_inverted_index.gives | 98 |
| abstract_inverted_index.item, | 179 |
| abstract_inverted_index.items | 66 |
| abstract_inverted_index.mould | 139, 142, 203 |
| abstract_inverted_index.order | 128 |
| abstract_inverted_index.rapid | 69 |
| abstract_inverted_index.rate. | 23 |
| abstract_inverted_index.rods, | 48 |
| abstract_inverted_index.tests | 148 |
| abstract_inverted_index.their | 93 |
| abstract_inverted_index.these | 77 |
| abstract_inverted_index.used. | 197 |
| abstract_inverted_index.using | 111, 164 |
| abstract_inverted_index.waste | 245 |
| abstract_inverted_index.which | 116, 168 |
| abstract_inverted_index.while | 237 |
| abstract_inverted_index.allows | 60 |
| abstract_inverted_index.amount | 85 |
| abstract_inverted_index.casing | 109 |
| abstract_inverted_index.covers | 8 |
| abstract_inverted_index.elbow, | 135 |
| abstract_inverted_index.elbows | 110 |
| abstract_inverted_index.expand | 19 |
| abstract_inverted_index.factor | 209 |
| abstract_inverted_index.global | 15 |
| abstract_inverted_index.having | 27 |
| abstract_inverted_index.method | 58 |
| abstract_inverted_index.reduce | 83, 130 |
| abstract_inverted_index.sizes, | 46 |
| abstract_inverted_index.speed, | 141 |
| abstract_inverted_index.tubes. | 51 |
| abstract_inverted_index.weight | 132, 192, 212, 236 |
| abstract_inverted_index.widely | 38 |
| abstract_inverted_index.Design, | 158 |
| abstract_inverted_index.Plastic | 52 |
| abstract_inverted_index.Surface | 155 |
| abstract_inverted_index.casing. | 249 |
| abstract_inverted_index.closing | 140 |
| abstract_inverted_index.factors | 161 |
| abstract_inverted_index.insight | 100 |
| abstract_inverted_index.optimum | 224 |
| abstract_inverted_index.piloted | 150 |
| abstract_inverted_index.plastic | 121, 177 |
| abstract_inverted_index.present | 96 |
| abstract_inverted_index.result, | 222 |
| abstract_inverted_index.sheets, | 49 |
| abstract_inverted_index.Response | 154 |
| abstract_inverted_index.Tunicate | 165 |
| abstract_inverted_index.addition | 25 |
| abstract_inverted_index.alarming | 22 |
| abstract_inverted_index.analysis | 181 |
| abstract_inverted_index.chemical | 31 |
| abstract_inverted_index.critical | 208 |
| abstract_inverted_index.machine, | 115 |
| abstract_inverted_index.material | 4, 104, 196, 244 |
| abstract_inverted_index.moulding | 54, 105, 114, 123 |
| abstract_inverted_index.pressure | 204 |
| abstract_inverted_index.provides | 56 |
| abstract_inverted_index.recently | 170 |
| abstract_inverted_index.research | 97 |
| abstract_inverted_index.revealed | 184 |
| abstract_inverted_index.variance | 183 |
| abstract_inverted_index.chloride) | 36 |
| abstract_inverted_index.continues | 17 |
| abstract_inverted_index.impacting | 210 |
| abstract_inverted_index.including | 136 |
| abstract_inverted_index.injection | 53, 113, 122, 137 |
| abstract_inverted_index.materials | 88 |
| abstract_inverted_index.mouldings | 78 |
| abstract_inverted_index.optimised | 163, 235 |
| abstract_inverted_index.parameter | 189 |
| abstract_inverted_index.polyvinyl | 35 |
| abstract_inverted_index.pressure, | 138, 143 |
| abstract_inverted_index.reduction | 193 |
| abstract_inverted_index.resulting | 233 |
| abstract_inverted_index.Algorithm, | 167 |
| abstract_inverted_index.accessible | 39 |
| abstract_inverted_index.assortment | 42 |
| abstract_inverted_index.components | 229 |
| abstract_inverted_index.comprising | 47 |
| abstract_inverted_index.considered | 126 |
| abstract_inverted_index.determined | 201 |
| abstract_inverted_index.developed. | 171 |
| abstract_inverted_index.electrical | 6, 107, 247 |
| abstract_inverted_index.increasing | 12 |
| abstract_inverted_index.minimising | 239 |
| abstract_inverted_index.parameters | 124 |
| abstract_inverted_index.population | 16 |
| abstract_inverted_index.previously | 118 |
| abstract_inverted_index.production | 63, 240 |
| abstract_inverted_index.Box-Behnken | 157 |
| abstract_inverted_index.Methodbased | 156 |
| abstract_inverted_index.manufacture | 225 |
| abstract_inverted_index.resistance, | 32 |
| abstract_inverted_index.significant | 188 |
| abstract_inverted_index.unexplored. | 119 |
| abstract_inverted_index.(chlorinated | 34 |
| abstract_inverted_index.facilitated, | 232 |
| abstract_inverted_index.lightweight, | 80 |
| abstract_inverted_index.backpressure. | 145 |
| abstract_inverted_index.construction. | 94 |
| abstract_inverted_index.manufactured. | 219 |
| abstract_inverted_index.fire-retardant | 3 |
| abstract_inverted_index.injection-moulded | 178, 227 |
| abstract_inverted_index.non-biodegradable | 87 |
| cited_by_percentile_year.max | 97 |
| cited_by_percentile_year.min | 95 |
| countries_distinct_count | 1 |
| institutions_distinct_count | 7 |
| citation_normalized_percentile.value | 0.5612402 |
| citation_normalized_percentile.is_in_top_1_percent | False |
| citation_normalized_percentile.is_in_top_10_percent | False |