A. Parthiban
YOU?
Author Swipe
View article: Mechanical and Dynamic Properties of Banana Fiber‐Reinforced Polyester Composites: A Multi‐Analytical Characterization Study
Mechanical and Dynamic Properties of Banana Fiber‐Reinforced Polyester Composites: A Multi‐Analytical Characterization Study Open
The principal objective of this investigation is to assess the damping properties of polyester composites reinforced with short banana fibers. The analysis includes evaluating mechanical characteristics, conducting free vibration examinati…
View article: Motors for Electrical Vehicles: A Review and Open Research Challenges
Motors for Electrical Vehicles: A Review and Open Research Challenges Open
View article: Comparative Study on <scp>EDM</scp> Wire Cutting and <scp> CO <sub>2</sub> </scp> Laser Cutting for High‐Precision Stainless Steel Sheet Processing
Comparative Study on <span>EDM</span> Wire Cutting and <span> CO <sub>2</sub> </span> Laser Cutting for High‐Precision Stainless Steel Sheet Processing Open
CO 2 laser cutting and electrical discharge machining (EDM) wire cutting are two advanced thermal energy‐based methods widely utilized for precision profile cutting tasks. This study conducts a comprehensive experimental analysis of these …
View article: Next-Generation Hydroxyapatite Based Composite Coatings for Enhanced Corrosion Resistance and Biological Performance of Titanium for Orthopedic Applications
Next-Generation Hydroxyapatite Based Composite Coatings for Enhanced Corrosion Resistance and Biological Performance of Titanium for Orthopedic Applications Open
View article: Correction to: Automatic liver segmentation using U-Net deep learning architecture for additive manufacturing
Correction to: Automatic liver segmentation using U-Net deep learning architecture for additive manufacturing Open
View article: Characterization on properties of Al7050/TiC/BN hybrid metal matrix composite
Characterization on properties of Al7050/TiC/BN hybrid metal matrix composite Open
Aluminum alloy and its allied composites are gaining popularity and find their exclusive application in all industries for more than two decades. Due to their increased usage, Al metal matrix composites were experimented by reinforcing the…
View article: Next-Generation Hydroxyapatite Based Composite Coatings for Enhanced Corrosion Resistance and Biological Performance of Titanium for Orthopaedic Applications
Next-Generation Hydroxyapatite Based Composite Coatings for Enhanced Corrosion Resistance and Biological Performance of Titanium for Orthopaedic Applications Open
View article: Investigate the Mechanical properties of Al7075-MoS<sub>2</sub> Composite via Powder Metallurgy
Investigate the Mechanical properties of Al7075-MoS<sub>2</sub> Composite via Powder Metallurgy Open
Al7075 is a material that is both lightweight and has a high thermal conductivity. Aluminum is one of the best materials available, and it also happens to be one of the least expensive. This study examines the hardness, tensile strength, c…
View article: Experimental investigation of mechanical and tribological properties of AA7065- B<sub>4</sub>C nano-composite
Experimental investigation of mechanical and tribological properties of AA7065- B<sub>4</sub>C nano-composite Open
The present study used the stir casting technique to create hybrid composites employing aluminium AA 7065 alloy for the matrix and boron carbide reinforcements. In order to study the high-temperature tribological behaviour of aluminium bor…
View article: Analysis of MRR, Thrust Force, and Torque in Drilling Al/BN/Al2O3 Composites using Hybrid Grey–Taguchi Technique
Analysis of MRR, Thrust Force, and Torque in Drilling Al/BN/Al2O3 Composites using Hybrid Grey–Taguchi Technique Open
The demand for hybrid composite materials has been expanding globally in all kinds of mechanical industries. Drilling is one of the basic operations required in manufacturing of various components and choosing optimum parameters of drillin…
View article: An Experimental Study on Concrete by Using Coconut Shell as Partial Replacement of Coarse Aggregates
An Experimental Study on Concrete by Using Coconut Shell as Partial Replacement of Coarse Aggregates Open
Coconut shell is a waste, generated by industrial and agricultural processes.The waste coconut shell is utilized to replace natural coarse aggregate.In this project, using coconut shell as a partial replacement of coarse aggregate.Making o…
View article: Experimental investigation on split type window Air conditioner using HFC and HC mixture as ecofriendly refrigerant alternate to HCFC-22
Experimental investigation on split type window Air conditioner using HFC and HC mixture as ecofriendly refrigerant alternate to HCFC-22 Open
This paper reports on an experimental study evaluating a window air conditioner's performance when R152a/R290/R600/R600a refrigerant mixture (by various mass percentages) is used as a possible alternative to R-22. Alternative refrigerants …
View article: Optimization of process parameters of refrigeration process for a refrigerant mixture
Optimization of process parameters of refrigeration process for a refrigerant mixture Open
This study optimizes refrigeration process parameters for a new refrigerant mixture. Grey relational analysis has been used to find the best process parameters that lead to a higher COP and lower compressor discharge temperature, lower com…
View article: Investigation of Wear Behaviour and Mechanical Properties of Titanium Diboride Reinforced AMMC Composites
Investigation of Wear Behaviour and Mechanical Properties of Titanium Diboride Reinforced AMMC Composites Open
The aluminium metal matrix composites (AMMCs) are preferred in automotive and aerospace industries for higher strength, weight ratio, good corrosion resistance, and also better tribological properties. This study proposed that the AA7075 a…
View article: Investigate the Process Parameter on the Friction Stir Welding of Dissimilar Aluminium Alloys
Investigate the Process Parameter on the Friction Stir Welding of Dissimilar Aluminium Alloys Open
The welding of different materials with an acceptable quality range is an emerging study area; engineers and scientists worldwide have long been concerned with dissimilar welding materials. This study focuses on determining the friction st…
View article: Investigation of the surface roughness of aluminium composite in the drilling process
Investigation of the surface roughness of aluminium composite in the drilling process Open
This paper investigates the Surface roughness in the various Aluminium composite. The drilling experiment is performed on specimens Al7075 + 3% Al2O3, Al7075 + 3% Al2O3 + 1% Mica, Al7075 + 3% Al2O3 + 2% Mica, Al7075 + 3% Al2O3 + 3% Mica wi…
View article: [Retracted] Parameters of Porosity and Compressive Strength‐Based Optimization on Reinforced Aluminium from the Recycled Waste Automobile Frames
[Retracted] Parameters of Porosity and Compressive Strength‐Based Optimization on Reinforced Aluminium from the Recycled Waste Automobile Frames Open
Automobile industries were ready to recycle the waste old parts as well as the damaged parts of the old vehicles as much as possible. This study mainly focused on the recycling of the waste and damaged aluminium frames of the automobile bo…
View article: [Retracted] Strength Enhancement Study on Composites of AA6066 Aluminium Alloy with Magnesium Oxide and Coal Ash
[Retracted] Strength Enhancement Study on Composites of AA6066 Aluminium Alloy with Magnesium Oxide and Coal Ash Open
Aluminium alloy is the most favourable material based on the various properties and economic factors. Always there are so many researches going on based on the enhancement of the material properties with various combinations and the variou…
View article: [Retracted] Improving the Mechanical Properties of Natural Fiber Composites of Hemp Fiber with Ramie and Banana Fiber through Compression Molding Method
[Retracted] Improving the Mechanical Properties of Natural Fiber Composites of Hemp Fiber with Ramie and Banana Fiber through Compression Molding Method Open
Natural fiber composite is the most preferable research area in the modern situation due to its availability, applications, and ecofriendly quality. This paper deals with the influence of hemp fiber with the various compositions of the ram…
View article: [Retracted] Optimization of Reinforced Aluminium Scraps from the Automobile Bumpers with Nickel and Magnesium Oxide in Stir Casting
[Retracted] Optimization of Reinforced Aluminium Scraps from the Automobile Bumpers with Nickel and Magnesium Oxide in Stir Casting Open
Here, the investigation is spotlighted on the aluminium alloy from the waste materials of the automobile bumpers which is a reinforced metal matrix composite created with 5 percentage of nickel and 5 percentage of magnesium oxide through t…
View article: Experimental investigation on mechanical properties of carbon fiber reinforced aluminum metal matrix composite
Experimental investigation on mechanical properties of carbon fiber reinforced aluminum metal matrix composite Open
Many research works were carried out in the field of material science; these researches show that the composite materials are better than the conventional materials due to their enhanced mechanical properties. The recent manufacturing tren…
View article: Exploration on Surface Roughness in Abrasive Water Jet Cutting of AA6063-TiC Composites for Vehicle Structural Applications
Exploration on Surface Roughness in Abrasive Water Jet Cutting of AA6063-TiC Composites for Vehicle Structural Applications Open
This paper deals a set of studies performed on AA6063-TiC composites produced by adding 3%, 6% and 9% wt. of TiC in aluminium alloy 6063 and processed with abrasive water jet cutting that are formed with garnet abrasive of 80 mesh size. Th…
View article: Development of ANN models for optimization of methane yield from floating dome digester
Development of ANN models for optimization of methane yield from floating dome digester Open
The development of methane generation is mainly based on a desirable combination of operating parameters. The essential objective of this analysis systematically analyzes the prediction of methane yield with different operating parameters.…
View article: Optimization of Abrasive Water Jet Cutting Parameter for AISI 316L Stainless Steel Sheet
Optimization of Abrasive Water Jet Cutting Parameter for AISI 316L Stainless Steel Sheet Open
Abrasive water jet cutting is a advanced manufacturing process to be used cut various type of material economically.The width of AWJC or kerf width is affected by Abrasive flow rate, cutting speed and stand of distance as well as the work-…
View article: A Comparative Characteristic Study of Jatropha and Cardanol Biodiesel Blends
A Comparative Characteristic Study of Jatropha and Cardanol Biodiesel Blends Open
The demand in fuel needs and the depleting fossil fuels raised the need towards bio-fuels. The emerging trend in research field is highly focused on biodiesel production and their characteristic analysis. Since pollution is a major threat …
View article: Optimization of CO<sub>2</sub> laser cutting parameters on Austenitic type Stainless steel sheet
Optimization of CO<sub>2</sub> laser cutting parameters on Austenitic type Stainless steel sheet Open
Thin AISI 316L stainless steel sheet widely used in sheet metal processing industries for specific applications. CO2 laser cutting is one of the most popular sheet metal cutting processes for cutting of sheets in different profile. In pres…
View article: Analysis of Biomethanation Process from market waste to generate bio energy
Analysis of Biomethanation Process from market waste to generate bio energy Open
In this study was to incur that the biogas production from traditional market wastes which were represented by cabbage stem and carrot peeling, white mustard were under taken in a laboratory experiment. To produce biogas, the raw material …
View article: Experimental Investigation of Turning Parameters on AA 6061-T6 Material
Experimental Investigation of Turning Parameters on AA 6061-T6 Material Open
Turning is a broadly used material removal process to manufacture cylindrical products. The effects of various process parameters on turning like spindle speed, feed rate and depth of cut have been investigated to Impact on Material Remova…
View article: Performance and Analysis of Floating dome Anaerobic Digester with Wet and Dry Feedstock
Performance and Analysis of Floating dome Anaerobic Digester with Wet and Dry Feedstock Open
The objective of this study is to evaluate the feasibility of anaerobic digestion to generate biogas yield and it's performed using wet and dry feed stock. The laboratory experiment is conducted in a floating dome type anaerobic digester w…