A. Riveiro
YOU?
Author Swipe
View article: Inteligencia artificial y educación superior en República Dominicana | Equipo editorial Aula
Inteligencia artificial y educación superior en República Dominicana | Equipo editorial Aula Open
Efectivamente, el concepto de inteligencia artificial (IA) está entre nosotros - aunque no necesariamente en República Dominicana- desde mediados del siglo XX. El primer ordenador de red neuronal, SNARC, fue creado en 1950 por dos alumnos …
View article: Lithium Orthosilicate Solid Porous Membranes for CO2 Capture Obtained from Silica Microfibers
Lithium Orthosilicate Solid Porous Membranes for CO2 Capture Obtained from Silica Microfibers Open
Lithium orthosilicate (Li4SiO4) has demonstrated a high CO2 adsorption rate and capacity and its suitability to be implemented in industry as CO2 capture technology at high temperatures. The optimum solid adsorbent should present a porous …
View article: Efficient Autonomous Dew Water Harvesting by Laser Micropatterning: Superhydrophilic and High Emissivity Robust Grooved Metallic Surfaces Enabling Filmwise Condensation and Radiative Cooling (Adv. Mater. 18/2025)
Efficient Autonomous Dew Water Harvesting by Laser Micropatterning: Superhydrophilic and High Emissivity Robust Grooved Metallic Surfaces Enabling Filmwise Condensation and Radiative Cooling (Adv. Mater. 18/2025) Open
View article: Efficient Autonomous Dew Water Harvesting by Laser Micropatterning: Superhydrophilic and High Emissivity Robust Grooved Metallic Surfaces Enabling Filmwise Condensation and Radiative Cooling
Efficient Autonomous Dew Water Harvesting by Laser Micropatterning: Superhydrophilic and High Emissivity Robust Grooved Metallic Surfaces Enabling Filmwise Condensation and Radiative Cooling Open
The present work explores a unique yet unexplored synergy between the properties of laser micropatterned metallic surfaces and the requirements for an autonomous dew water harvesting candidate material. Laser‐patterned aluminum surfaces ac…
View article: Bimetallic Pd/CuO nanoparticles obtained by laser re-irradiation in liquids for antibacterial applications
Bimetallic Pd/CuO nanoparticles obtained by laser re-irradiation in liquids for antibacterial applications Open
Antimicrobial resistance (AMR) is considered a major global health problem of the 21st century. Noble metal nanoparticles (NPs) have attracted increasing attention as a promising tool to fight against resistant infections. In this research…
View article: Laser-Based Manufacturing II
Laser-Based Manufacturing II Open
Laser-based manufacturing technologies have consolidated their key position among competitor manufacturing technologies thanks to the elevated level of accuracy, productivity, consistency, and flexibility provided by the advances in laser …
View article: Influence of fiber dimensions on the mechanical properties of silica glass nanofibers
Influence of fiber dimensions on the mechanical properties of silica glass nanofibers Open
The understanding of the mechanical properties in glass nanofibers remains a challenge. As the fiber diameter decreases, surface-to-volume atom fraction increases, making the impact of surface defects more significant. To elucidate these e…
View article: Surface Modification of Bioactive Glasses by Femtosecond and CO2 Lasers
Surface Modification of Bioactive Glasses by Femtosecond and CO2 Lasers Open
This study explores the potential of laser surface modification (LSM) to enhance the biological properties of melt-derived bioactive glasses, specifically 45S5 and ICIE16, which are key in medical implants due to their bone-regenerating ca…
View article: Bimetallic Pd/Cuo Nanoparticles Obtained by Laser Re-Irradiation in Liquids for Antibacterial Applications
Bimetallic Pd/Cuo Nanoparticles Obtained by Laser Re-Irradiation in Liquids for Antibacterial Applications Open
View article: Fatigue crack growth and fracture toughness of shot peened 6060 T6 aluminium alloy
Fatigue crack growth and fracture toughness of shot peened 6060 T6 aluminium alloy Open
View article: The effects of shot peening intensity and coverage on the surface properties and fatigue life of AZ31B magnesium alloy
The effects of shot peening intensity and coverage on the surface properties and fatigue life of AZ31B magnesium alloy Open
View article: The Influence of Shot Peening Media on Surface Properties and Fatigue Behaviour of Aluminium Alloy 6082 T6
The Influence of Shot Peening Media on Surface Properties and Fatigue Behaviour of Aluminium Alloy 6082 T6 Open
Shot peening is generally used to improve the fatigue performance of mechanical components. However, identifying the geometrical and mechanical characteristics of the shots that improve fatigue strength is still a challenging task, as ther…
View article: Anomalous twin boundary formation in magnesium alloys by rapid solidification
Anomalous twin boundary formation in magnesium alloys by rapid solidification Open
The aim of this work is to investigate the formation of an anomalously high fraction of twin boundaries (TBs) during laser directed energy deposition (DED) of a Mg-3Al-1 Zn (wt.%) alloy. With that goal, single tracks are deposited using di…
View article: Cobalt containing glass fibres and their synergistic effect on the HIF-1 pathway for wound healing applications
Cobalt containing glass fibres and their synergistic effect on the HIF-1 pathway for wound healing applications Open
Introduction and Methods: Chronic wounds are a major healthcare problem, but their healing may be improved by developing biomaterials which can stimulate angiogenesis, e.g. by activating the Hypoxia Inducible Factor (HIF) pathway. Here, no…
View article: An Experimental Analysis of the High-Cycle Fatigue Fracture of H13 Hot Forging Tool Steels
An Experimental Analysis of the High-Cycle Fatigue Fracture of H13 Hot Forging Tool Steels Open
In this study, the axial fatigue behaviour of hot forging tool steels at room temperature was investigated. Fatigue tests were performed on two steels within the same H13 specification. The fatigue tests were carried out in the high-cycle …
View article: Laser Synthesis of Nanomaterials
Laser Synthesis of Nanomaterials Open
Nanomaterials, defined as materials with typical dimensions of less than 100 nm in at least one dimension, exhibit very special physicochemical properties that are highly dependent on their size and shape [...]
View article: Palladium Nanoparticles Synthesized by Laser Ablation in Liquids for Antimicrobial Applications
Palladium Nanoparticles Synthesized by Laser Ablation in Liquids for Antimicrobial Applications Open
Antibiotic resistance is a leading cause of death worldwide. In this paper, we explore new alternatives in the treatment of infections. Noble metal nanoparticles could help to mitigate this problem. In this work, palladium nanoparticles we…
View article: Characterization of Co-Cr-W Dental Alloys with Veneering Materials Manufactured via Subtractive Milling and Additive Manufacturing LDED Methods
Characterization of Co-Cr-W Dental Alloys with Veneering Materials Manufactured via Subtractive Milling and Additive Manufacturing LDED Methods Open
Laser-directed energy deposition (LDED) is an additive manufacturing (AM) technology which can be an alternative to the traditional subtractive milling process for the obtention of porcelain-fused-to-metal (PFM) prosthesis. Still, the adhe…
View article: 3D printing with star-shaped strands: A new approach to enhance in vivo bone regeneration
3D printing with star-shaped strands: A new approach to enhance in vivo bone regeneration Open
View article: Flexible sensing devices integrating molecularly-imprinted polymers for the detection of 3-nitrotyrosine biomarker
Flexible sensing devices integrating molecularly-imprinted polymers for the detection of 3-nitrotyrosine biomarker Open
View article: Referee report. For: Monitoring concept for powder flow monitoring in Laser-Directed Energy Deposition (L-DED) process based on flexible piezoelectric sensors [version 1; peer review: 1 approved with reservations]
Referee report. For: Monitoring concept for powder flow monitoring in Laser-Directed Energy Deposition (L-DED) process based on flexible piezoelectric sensors [version 1; peer review: 1 approved with reservations] Open
View article: Experimental study of strength and fracture toughness of laser-blasted glass
Experimental study of strength and fracture toughness of laser-blasted glass Open
The use of glass in structural applications has been increasing during last years. Nevertheless, the generalized use of surface-modified bearing glass is precluded by the lack of knowledge about their mechanical performance. This experimen…
View article: Palladium Nanoparticles Synthesized by Laser Ablation in Liquids for Antimicrobial Applications
Palladium Nanoparticles Synthesized by Laser Ablation in Liquids for Antimicrobial Applications Open
View article: Nanosecond, picosecond and femtosecond laser surface treatment of magnesium alloy: role of pulse length
Nanosecond, picosecond and femtosecond laser surface treatment of magnesium alloy: role of pulse length Open
Despite having a whole range of applications as in weight-saving structures, biodegradable implants and rechargeable batteries, the usage of magnesium is still hindered by its high tendency to corrosion. Pulsed laser treatments are an inte…
View article: 3D printing non-cylindrical strands: Morphological and structural implications
3D printing non-cylindrical strands: Morphological and structural implications Open
View article: Hyaluronic acid hydrogels reinforced with laser spun bioactive glass micro- and nanofibres doped with lithium
Hyaluronic acid hydrogels reinforced with laser spun bioactive glass micro- and nanofibres doped with lithium Open
The repair of articular cartilage lesions in weight-bearing joints remains as a significant challenge due to the low regenerative capacity of this tissue. Hydrogels are candidates to repair lesions as they have similar properties to cartil…
View article: Recent Developments in Laser Welding of Aluminum Alloys to Steel
Recent Developments in Laser Welding of Aluminum Alloys to Steel Open
The development of high-performance dissimilar aluminum–steel joints is necessary to promote the feasibility of multi-material design and lightweight manufacturing. However, joining aluminum to steel is a challenging task mainly due to the…
View article: Improved Commercially Pure Titanium Obtained by Laser Directed Energy Deposition for Dental Prosthetic Applications
Improved Commercially Pure Titanium Obtained by Laser Directed Energy Deposition for Dental Prosthetic Applications Open
The objective of this study was to evaluate the viability of the cp-Ti obtained through the laser-directed energy deposition (LDED) technique as a material for dental prostheses through an evaluation of the microstructural, mechanical, and…
View article: Effect of Four Manufacturing Techniques (Casting, Laser Directed Energy Deposition, Milling and Selective Laser Melting) on Microstructural, Mechanical and Electrochemical Properties of Co-Cr Dental Alloys, Before and After PFM Firing Process
Effect of Four Manufacturing Techniques (Casting, Laser Directed Energy Deposition, Milling and Selective Laser Melting) on Microstructural, Mechanical and Electrochemical Properties of Co-Cr Dental Alloys, Before and After PFM Firing Process Open
The objective of this study was to compare four manufacturing processes of Co-Cr dental alloys: casting (CAST), computer aided design/computer aided manufacturing (CAD/CAM) milling (MILL), selective laser melting (SLM), and laser directed …
View article: Influence of laser texturing on the wettability of PTFE
Influence of laser texturing on the wettability of PTFE Open