Andrew P. Abbott
YOU?
Author Swipe
View article: The tube transducer as a novel source for power ultrasound: A case study in delamination of graphite coating from lithium-ion battery anode
The tube transducer as a novel source for power ultrasound: A case study in delamination of graphite coating from lithium-ion battery anode Open
Developing high throughput applications of sonochemistry and sonoprocessing is an outstanding ultrasonic engineering challenge that continues to limit widespread industrial adoption. Conventional mass-produced Langevin-based technologies, …
View article: Electrodeposition of Ni by oxidation of Ni powder using I <sub>2</sub> in a choline chloride-ethylene glycol electrolyte
Electrodeposition of Ni by oxidation of Ni powder using I <sub>2</sub> in a choline chloride-ethylene glycol electrolyte Open
View article: Copper extraction and phytotoxicity of organic acid leached mine tailings
Copper extraction and phytotoxicity of organic acid leached mine tailings Open
Mine tailings pose environmental hazards but can also contain economically valuable metals like copper (Cu). Organic solvents, particularly low molecular weight organic acids (LMWOAs), are natural and biodegradable acids with great potenti…
View article: Dissolution of rare-earth elements (Nd, Dy and Pr) in end-of-life neodymium magnet by an ultrasound-assisted electrochemical process
Dissolution of rare-earth elements (Nd, Dy and Pr) in end-of-life neodymium magnet by an ultrasound-assisted electrochemical process Open
View article: Potentiometric Water Sensor For Eutectic Solvents Containing Choline Chloride and Ethylene Glycol
Potentiometric Water Sensor For Eutectic Solvents Containing Choline Chloride and Ethylene Glycol Open
Electrochemical reprocessing of metals using eutectic solvents (ESs) is a promising approach due to its availability, cost-effectiveness, ease of preparation, and environmental benefits. However, a significant challenge associated with ESs…
View article: Hybrid delamination of silver contacts from c-Si solar cells: a low environmental impact recycling approach
Hybrid delamination of silver contacts from c-Si solar cells: a low environmental impact recycling approach Open
As deployment of photovoltaic (PV) systems intensify amidst the shift towards renewable energy sources, the imperative to minimise their environmental footprint across the full life cycle has become increasingly critical. Here, we introduc…
View article: Electrochemical etching of metals and minerals using ultrasound in deep eutectic solvents
Electrochemical etching of metals and minerals using ultrasound in deep eutectic solvents Open
This study compares the anodic dissolution of two iron-based alloys, mild steel and an FeNdB super magnet, with that of a mineral, chalcopyrite (CuFeS2), in a deep eutectic solvent formed from choline chloride and ethylene glyco…
View article: Electrodeposition of iron and neodymium from calcium chloride hexahydrate eutectic solvents
Electrodeposition of iron and neodymium from calcium chloride hexahydrate eutectic solvents Open
View article: Fast Delamination of Fuel Cell Catalyst-Coated Membranes Using High-Intensity Ultrasonication
Fast Delamination of Fuel Cell Catalyst-Coated Membranes Using High-Intensity Ultrasonication Open
View article: Tribological Characterization of Friction-induced Phase Transformations in Binary Nitinol
Tribological Characterization of Friction-induced Phase Transformations in Binary Nitinol Open
The binary alloy of nickel and titanium, commonly known as Nitinol, is widespread in the biomedical industry such as vascular stents. Recently, Nitinol’s application potential has expanded, including as actuating materials in ultrasonic tr…
View article: An Assessment of Blended Short Loop Recycled Graphite Electrodes Using X‐Ray Micro‐Computed Tomography
An Assessment of Blended Short Loop Recycled Graphite Electrodes Using X‐Ray Micro‐Computed Tomography Open
With various battery directives necessitating the composition of recycled electrode materials this study manufactures anodes containing various ratios of pristine and reclaimed graphite from end‐of‐life (EOL) cells. Two approaches that can…
View article: Using ultrasonic oil–water nano-emulsions to purify lithium-ion battery black mass
Using ultrasonic oil–water nano-emulsions to purify lithium-ion battery black mass Open
Long-loop recycling of spent lithium-ion batteries is neither sustainable nor economical at scale.
View article: Critical metal recovery from e-waste in concentrated ionic media using ultrasound
Critical metal recovery from e-waste in concentrated ionic media using ultrasound Open
Room temperature ultrasonication of waste PCBs to separate electronic components and technology critical metals.
View article: Electrodeposition of Iron and Neodymium from Calcium Chloride Hexahydrate Eutectic Solvents
Electrodeposition of Iron and Neodymium from Calcium Chloride Hexahydrate Eutectic Solvents Open
View article: Catalyst coated membranes for fuel cell and water electrolyser delamination induced by organic solution soaking and water ultrasonication
Catalyst coated membranes for fuel cell and water electrolyser delamination induced by organic solution soaking and water ultrasonication Open
This study presents a novel room-temperature, two-step process for separating catalyst-coated membranes (CCMs) used in fuel cells and water electrolysers.
View article: Design for recycle of devices to ensure efficient recovery of technology critical metals
Design for recycle of devices to ensure efficient recovery of technology critical metals Open
Design for recycle unlocks selective and efficient recycling of technology critical metals.
View article: Timeline for establishing a circular economy for lithium-ion batteries
Timeline for establishing a circular economy for lithium-ion batteries Open
Electrification is a complex process with numerous stakeholders affecting circularity.
View article: Influence of cations size and charge on Zn electrodeposition from Deep Eutectic Solvents
Influence of cations size and charge on Zn electrodeposition from Deep Eutectic Solvents Open
View article: Effect of organic solvent additives on the enhancement of ultrasonic cavitation effects in water for lithium-ion battery electrode delamination
Effect of organic solvent additives on the enhancement of ultrasonic cavitation effects in water for lithium-ion battery electrode delamination Open
View article: Influence of colourants on environmental degradation of plastic litter
Influence of colourants on environmental degradation of plastic litter Open
Plastic degradation and the resultant production of microplastics has an important effect on the environment and fauna across the world. This paper shows that the colourant incorporated into plastic formulations has a significant effect on…
View article: Improving the Conductivity of Graphite-Based Lithium-Ion Battery Anodes Using Polyaniline–Alginate Blends
Improving the Conductivity of Graphite-Based Lithium-Ion Battery Anodes Using Polyaniline–Alginate Blends Open
This investigation shows the effect of blending sodium alginate (NaAlg) and a conducting polymer, polyaniline (PANI), in lithium-ion battery (LIB) anodes. We demonstrate here that inclusion of the PANI into the binder improves the connecti…
View article: Ionic fluids at equilibrium: thermodynamics, nanostructure, phase behaviour, activity: general discussion
Ionic fluids at equilibrium: thermodynamics, nanostructure, phase behaviour, activity: general discussion Open
This paper constitutes a presentation of work in progress at a discussion\nsession of the conference Dense ionic fluids Faraday Discussion, 8-10 July\n2024, London, and is published on pages 293-295 in Ref. [Faraday Discuss. 2024,\nvolume …
View article: Influence of Colourants on Environmental Degradation of Plastic Litter
Influence of Colourants on Environmental Degradation of Plastic Litter Open
View article: The effect of using alternative binders and second life graphite materials on the electrochemical performance of lithium-ion battery electrodes
The effect of using alternative binders and second life graphite materials on the electrochemical performance of lithium-ion battery electrodes Open
Lithium-ion battery anodes were produced and tested using gelatin and sodium alginate (NaAlg) biopolymers, modified with a deep eutectic solvent (DES). Anodes created with these alternative binder systems showed comparable capacities and C…
View article: Observation of cavitation dynamics in viscous deep eutectic solvents during power ultrasound sonication
Observation of cavitation dynamics in viscous deep eutectic solvents during power ultrasound sonication Open
We characterise the development of cavitation structure in three deep eutectic solvents of increasing viscosity, and water, via high-speed imaging and parallel acoustic detection..
View article: Overcoming passivation through improved mass transport in dense ionic fluids
Overcoming passivation through improved mass transport in dense ionic fluids Open
Formation of metal passivation layers during electrochemical dissolution is prevented by the use of ultrasound. Migration becomes the main method of mass transport across the electrical double layer.
View article: A toolbox for improved recycling of critical metals and materials in low-carbon technologies
A toolbox for improved recycling of critical metals and materials in low-carbon technologies Open
A “toolbox” of processes is highlighted to recycle metals from energy storage and renewable energy devices.
View article: Using ultrasound to increase copper and nickel dissolution and prevent passivation using concentrated ionic fluid.
Using ultrasound to increase copper and nickel dissolution and prevent passivation using concentrated ionic fluid. Open
This paper uses targeted ultrasound on a surface undergoing anodic dissolution. The aim of these experiments was to etch metals that would normally passivate. The study was carried out in deep eutectic solvents (DESs) as these are technolo…
View article: Ultra-fast extraction of metals from a printed circuit board using high power ultrasound in a calcium chloride-based deep eutectic solvent
Ultra-fast extraction of metals from a printed circuit board using high power ultrasound in a calcium chloride-based deep eutectic solvent Open
The increase of digitization, alongside the growth in consumer electronics and shortened life cycles, has led to a significant global increase in the volume of electronic waste (e-waste).
View article: A mechanistic study identifying improved technology critical metal delamination from printed circuit boards at lower power sonications in a deep eutectic solvent
A mechanistic study identifying improved technology critical metal delamination from printed circuit boards at lower power sonications in a deep eutectic solvent Open
Deep eutectic solvents (DESs) are an emerging class of ionic liquids that offer a solution to reclaiming technology critical metals (TCMs) from electronic waste, with potential for improved life cycle analysis. The high viscosities typical…