Aneela Wakeel
YOU?
Author Swipe
View article: Virtual Energy Replication Framework for Predicting Residential PV Power, Heat Pump Load, and Thermal Comfort Using Weather Forecast Data
Virtual Energy Replication Framework for Predicting Residential PV Power, Heat Pump Load, and Thermal Comfort Using Weather Forecast Data Open
It is essential to balance energy supply and demand in residential buildings through accurate forecasting of energy use due to varying daily and seasonal residential building loads. This study demonstrates a data-driven Virtual Energy Repl…
View article: Development and Characterization of Aluminum Bronze Alloy Bush Sleeve Using Horizontal Centrifugal Casting
Development and Characterization of Aluminum Bronze Alloy Bush Sleeve Using Horizontal Centrifugal Casting Open
Aluminum Bronze bushing sleeves or sleeve bearings are used in the various parts of vehicles like camshaft bushing, suspensions, shock absorber, gears and strut bushes for anti-wear, anti-friction and for bearings high tensile loads. This …
View article: Development of AgNPs-PVP/TPU based flexible strain sensors for structural health monitoring of composite structures
Development of AgNPs-PVP/TPU based flexible strain sensors for structural health monitoring of composite structures Open
Real-time in-stu structural health monitoring (SHM) of composite structure developed through highly sensitive and flexible smart sensors based on colloidal solution of Silver Nano Particles (AgNPs). Synthesis of AgNPs through chemical redu…
View article: Improving anti-corrosion and mechanical properties of mild steel pipelines by using polyurea with nanoparticles
Improving anti-corrosion and mechanical properties of mild steel pipelines by using polyurea with nanoparticles Open
ASTM A106 B grade is used to manufacture seamless steel pipe, which can be used at high temperature, pressure, and hard environmental conditions for oil and gas supplies but suffers from corrosion. Polyurea is an organic coating that is re…
View article: Investigation of mechanical and thermal behavior of fiber-reinforced silica xerogel composites
Investigation of mechanical and thermal behavior of fiber-reinforced silica xerogel composites Open
Silica aerogels or xerogels are renowned dried gels with low density, high surface area, higher porosity, and better thermal stability which makes it suitable for aerospace, light weight structures, thermal insulation, and hydrophobic coat…
View article: Development and Characterization of Aluminum Bronze Alloy Bush sleeve using Horizontal Centrifugal Casting
Development and Characterization of Aluminum Bronze Alloy Bush sleeve using Horizontal Centrifugal Casting Open
Aluminum Bronze bushing sleeves or sleeve bearings are used in the various parts of vehicles like camshaft bushing, suspensions, shock absorber, gears and strut bushes for anti-wear, anti-friction and for bearings high tensile loads. This …
View article: Optimization of process parameters for shielded metal arc welding for ASTM A 572 grade 50
Optimization of process parameters for shielded metal arc welding for ASTM A 572 grade 50 Open
The quality of a weld significantly depends on the mechanical characteristics of the welded joint, the welding process, and its associated input parameters. Insufficient parameter values can lead to welding defects and distortion that adve…
View article: Dissimilarly Laser Welded High Entropy Alloy and Stainless Steel 304
Dissimilarly Laser Welded High Entropy Alloy and Stainless Steel 304 Open
This research explores the dissimilar welding of High Entropy Alloy (HEA), specifically FeNiMnCr18, with conventional Stainless Steel (SS 304) using laser welding, without the use of filler metal. The study employs state-of-the-art techniq…
View article: Parametric Modeling for Activated Carbon Synthesis
Parametric Modeling for Activated Carbon Synthesis Open
This study investigates the synthesis of activated carbon from waste tires, focusing on how heating rates influence activation energy and product quality. Through controlled experiments, the research evaluates the impact of varying thermal…
View article: Analysis of Mechanical Strength of Indium-Doped SAC 105 Lead-Free Solder Alloy
Analysis of Mechanical Strength of Indium-Doped SAC 105 Lead-Free Solder Alloy Open
The incorporation and doping of elements represent a widely used approach to enhance the solidity, integrity, and characteristics of pb-free solder joints. The present study summarizes the incorporation of indium and its impact on the mech…
View article: Investigation of mechanical and thermal behavior of fiber-reinforced silica aerogel composites
Investigation of mechanical and thermal behavior of fiber-reinforced silica aerogel composites Open
Fiber-reinforced silica xerogels are extensively utilized in various applications due to their versatility. This research focuses on examining the influence of silica gel fiber reinforcement on the physical properties of silica xerogel. Th…
View article: Selection of Joint Preparation Procedure based on Cost-effectiveness and Defects analysis of Double-V SMAW Joint
Selection of Joint Preparation Procedure based on Cost-effectiveness and Defects analysis of Double-V SMAW Joint Open
Double sided shielded metal arc welded joint has wide applications in fabrication sector for production of critical joints but the root pass in those joint leads to many defects, mainly due to the sudden cooling because the adjacent base m…
View article: Process Re-design and Automation Using Enterprise Resource Planning System for Manufacturing Industry
Process Re-design and Automation Using Enterprise Resource Planning System for Manufacturing Industry Open
In the era of Industry 4.0, automation is the backbone for any industry to grow and sustain. Many studies suggest that ERP system helps industries to integrate and automate most of the business processes, enhance production efficiency and …
View article: Optimization of TIG Welding Parameters for Ti-6Al-4V Titanium Alloy using the Taguchi Design of Experiment
Optimization of TIG Welding Parameters for Ti-6Al-4V Titanium Alloy using the Taguchi Design of Experiment Open
This paper presents the effect of tungsten inert gas welding parameters (i.e. welding current, welding speed and filler wire speed) on weld bead geometry, notch tensile strength (NTS) and weld bead hardness of 2.0 mm thick annealed Ti6Al4V…
View article: Investigation of Microstructure and Stress Corrosion Cracking in Al-6061-T6 Alloy at Different Loads
Investigation of Microstructure and Stress Corrosion Cracking in Al-6061-T6 Alloy at Different Loads Open
Stress corrosion cracking (SCC) refers to the damage of mechanical components which are under the combined action of static load and corrosive environment. This phenomenon occurs in various applications including naval and aerospace indust…
View article: Mechanical Characterization of Copper NanoParticles based Glass Fibre Reinforced Polymer Composites
Mechanical Characterization of Copper NanoParticles based Glass Fibre Reinforced Polymer Composites Open
Polymeric composites are being usedextensively used in aerospace, automobile,transportation, chemical, construction and logisticsindustries. Copper Nanoparticles reinforced GFRPcomposites have been fabricated to enhance electricaland therm…
View article: EXPERIMENTAL AND NUMERICAL SIMULATION OF BRINELL HARDNESS TEST OF AL7075 ALCLAD T6 IN ABAQUS
EXPERIMENTAL AND NUMERICAL SIMULATION OF BRINELL HARDNESS TEST OF AL7075 ALCLAD T6 IN ABAQUS Open
Aerospace technology widely depend on the Strength-to-Density ratio of materials and Aluminum Alloys (Usually Al-7075 T6) is generally playing vital role in fulfilling these requirements. Al-7075 is often used in transport applications, in…
View article: Effect of Thermal Cycling on the Tensile Behavior of CF/AL Fiber Metal Laminates
Effect of Thermal Cycling on the Tensile Behavior of CF/AL Fiber Metal Laminates Open
The objective of this research work was to estimate the effect of thermal cycling on the tensile behavior of CARALL composites. Fiber metal laminates (FMLs), based on 2D woven carbon fabric and 2024-T3 Alclad aluminum alloy sheet, was manu…