Antonín Kříž
YOU?
Author Swipe
Casting of Aluminium Foam with Defined Porosity Using DoE Open
Closed cell aluminium foam offers an interesting combination of properties such as high energy absorption, stiffness, strength and low density. These properties give it great potential as an impact absorbing material which can be used in t…
Evaluation of Structure and Properties of COR 13/4 (GX4CrNi13-4) Tungsten Inert Gas-Welded Steel Open
The effect of tungsten inert gas welding in combination with high alloyed filler materials on the microstructure and mechanical properties of COR 13/4 martensitic stainless steel were investigated by mechanical testing and metallography ob…
Possibilities of Restoring the Plasticity of Operationally Degraded Steel EN ISO 14MoV6-3 Open
The article deals with the possibility of increasing mechanical and utility properties by means of regenerative heat treatment. Experimental program is focused on the heat treatment of low-alloy heat-resistant steel EN ISO 14MoV6-3. This s…
High-Temperature Corrosion of Flame-Sprayed Power Boiler Components with Nickel Alloy Powders Open
The development trends in the energy sector clearly indicate an increase in the share of biomass and alternative fuels fed for combustion in power boilers, which results in the imposition of many unfavourable factors and a demanding workin…
The Effect of Boriding and Heat Treatment on the Structure and Properties of 100Cr6 Steel Open
Hlavním cílem této studie bylo představit změny, které vyvolá tepelné zpracování ve struktuře a vlastnostech oceli 100Cr6 a to procesy žíhání, kalení a popouštění, v kombinaci s chemicko-tepelným zpracováním vzorků technologií boridování p…
Changes in Structure and Corrosion Resistance of Cryogenically Treated WC-Co Cemented Carbides Open
The aim of this study was to evaluate changes in the corrosion resistance and microstructure of deeply cryogenic treated (DCT) cemented carbides (CC). Changes in corrosion resistance were determined by potentiodynamic testing in artificial…
Structure and Properties of TiO2/nanoTiO2 Bimodal Coatings Obtained by a Hybrid PVD/ALD Method on 316L Steel Substrate Open
This paper presents the synergy of the effect of two surface engineering technologies—magnetron sputtering (MS-PVD) and atomic layer deposition (ALD) on the structure and properties of 316L steel. Recent studies indicate that PVD coatings,…
Investigations of TiO₂, Ti/TiO₂, and Ti/TiO₂/Ti/TiO₂ coatings produced by ALD and PVD methods on Mg-(Li)-Al-RE alloys substrates Open
Magnesium alloys have recently become increasingly popular in many sectors of the industry due to their unique properties, such as low density, high specific strength, vibration damping ability along with their recyclability and excellent …
Influence of the Boriding Process on the Properties and the Structure of the Steel S265 and the Steel X6CrNiTi18-10 Open
Tato případová studie se zabývá změnami v mikrostruktuře oceli S265 a oceli X6CrNiTi18-10 po procesu jejich chemicko-tepelného zpracování boridováním. Vzorky vyrobené z těchto ocelí byly boridovány v zásypu prášku při 900 0C. Při boridován…
View article: Suitability Confirmation for Welding Ultra-High Strength Steel S1100QL Using the RapidWeld Method
Suitability Confirmation for Welding Ultra-High Strength Steel S1100QL Using the RapidWeld Method Open
Provedený experiment je zaměřen na vhodnost využití hlubokopenetračního svařování metodou RapidWeld pro svařování vysokopevné oceli. Posouzení vhodnosti této metody svařování bylo realizováno porovnáním konečných materiálových vlastností 3…
Composite laser claddings for corrosion protection of outer surfaces of storage containers for spent nuclear fuel in underground repositories Open
Příspěvek je zaměřen na analýzu materiálových struktur a korozních dějů v měď-čedičovém kompozitním materiálu, který byl technologií laserového navařování navařen na ocelový substrát. Jako přídavný materiál byla použita v laboratoři připra…
Wear Resistance of (Ti,Al)N Metallic Coatings for Extremal Working Conditions Open
The article includes research results for the functional properties achieved for a wide range of sintered tool materials, including sintered carbides, cermets and three types of Al2O3 oxide tool ceramics ((Al2O3 + ZrO2, Al2O3 + TiC and Al2…
Development of the Structure of Cemented Carbides during Their Processing by SLM and HIP Open
The study focuses on microstructural evolution in a WC-Co powder mixture during Selective Laser Melting (SLM) and hot isostatic pressing (HIP) processing. This powder mixture contained a 13 ± 0.6% weight fraction of Co binder and WC partic…
Structure and Properties of ZnO Coatings Obtained by Atomic Layer Deposition (ALD) Method on a Cr-Ni-Mo Steel Substrate Type Open
This paper aimed to investigate the structure and physicochemical and tribological properties of ZnO coatings deposited by ALD on 316L stainless steel for biomedical applications. To obtain ZnO films, diethylzinc (DEZ) and water were used …
Comparison of Foundry Industry in Slovakia and Czech Republic Open
Foundry industry is an important supplier of complex shape parts for other industrial branches. It depends on the development of customer demand in other industries. The current paper compares the structure and sales of foundry industry in…
COMPARISON OF THE EFFECT OF THE APPLIED ENERGY ON THE PROPERTIES OF PROTOTYPES MADE FROM DIFFERENT TYPES OF POWDER MIXTURES Open
Níže uvedený článek se zabývá zpracováním různých typů práškových směsí WC-Co technologií SLM. Použité práškové směsi se lišily svojí morfologií částic prášku, tj. Lišily se tvarem, velikostí a chemickým složením jednotlivých částic prášku…
Influence of the Quality of Models Made by Additive Technologies on the Quality of Castings Cast by Investment Casting Open
Článek se zabývá problematikou aplikace aditivních technologií (AM) v procesu výroby odlitků vyráběných metodou lití na vytavitelný model. AM technologie SLA, FDM nebo PolyJet byly použity k vytvoření modelů odlitku z různých polymerních m…
Influence of Boridation on Microstructure and Properties of Aluminium Alloy EN AW-2024 Open
Cílem této případové studie bylo provést analýzu vlivu procesu boridování na strukturu a mechanické vlastnosti hliníkové slitiny ENAW-2024. Připravené vzorky byly zpracovány za různých procesních parametrů v zásypu prášku Durferit. Po prov…
Effects of Basalt on Corrosion Resistance of Composite Basalt-Copper Laser Cladding Open
Příspěvek je zaměřen na analýzu vlivu čediče na korozní odolnost kompozitního materiálu na bázi měď-čedič, který byl technologií laserového navařování deponován na ocelový substrát. V rámci experimentálního programu byly připraveny 3 směsi…
Influence of heat treatment on properties of SD251-PH1 composite produced by additive SLM technology Open
This study evaluates how heat treatment affects the structure and properties of the engineered composite material SD251-PH1. This material was formed by mixing two powder blends in a weight ratio of 90 wt. % WC-Co powder SD251 with 10 wt. …
High-temperature tribological protection of laser cladding materials for power generation components Open
Článek je zaměřen na analýzu a porovnání vlastností laserových návarů typu „Stellit 6“ a „Stellit 21“ na základní materiál 1.4923 + QT používaný pro komponenty energetických zařízení. V toto článku je řešeno porovnání vlastností návarů nav…
THE EFFECT OF SELECTIVE LASER MELTING TECHNOLOGY ON THE DEVELOPMENT OF THE STRUCTURE OF SAMPLES MADE FROM WC-CO POWDER Open
Cílem této studie bylo analyzovat, jak změna procesních parametrů zpracování prášku WC-Co ovlivňuje jeho vlastnosti. Vlastnosti práškové směsi byly nejprve vyhodnoceny technologickými testy a poté byly výsledky porovnány s vlastnostmi práš…
PROCESSABILITY OF WC-CO POWDER MIXTURES USING SLM ADDITIVE TECHNOLOGY Open
Příspěvek prezentuje poznatky z experimentální studie, která zkoumala možnost zpracování prášků na bázi WC-Co s použitím technologie selektivního laserového tavení (SLM). Byly studovány dvě komerčně dostupné WC-Co práškové směsi. Jedna je …
Analysis of Fractured Weldment of Hadfield Steel Open
Tento příspěvek je rozdělen do dvou částí. První se zabývá analýzou příčiny poškození prstence, ke které došlo po navaření povrchu prstence. Ke stanovení příčiny destrukce prstence byla použita světelná a řádkovací elektronová mikroskopie …
Effect of Cryogenic Treatment on Properties of Cemented Carbides Open
Hlavním cílem výzkumného programu je představit experimenty zkoumající vliv kryogenního zpracování na vlastnosti slinutých karbidů. Experimentální materiály byly vybrány ze tří základních skupin slinutých karbidů s různými pojivy a rozdíln…
CORROSION RESISTANCE OF LASER-DEPOSITED COMPOSITE COPPER-BASALT OVERLAY Open
Příspěvek je zaměřen na hodnocení korozní odolnosti kompozitního laserového návaru na bázi měď-čedič. Přídavným práškem pro laserové navařování byla směs měděného prášku o vysoké čistotě Oerlikon METCO 55 o zrnitosti 45-90 µm a čedičový pr…
Numerical modelling of welding of duplex steel Open
A steel will not become widely accepted and used unless it can be successfully welded without too many limitations. Contemporary duplex stainless steel grades fulfil these requirements with some grade dependent differences. The duplex stai…
CHEMICAL HETEROGENEITY OF INCONEL 625 LASER OVERLAY WITH AN INCREASED MOLYBDENUM CONTENT AND ITS EVALUATION USING THE POTEntIODYNAMIC CORROSION TEST Open
Příspěvek je zaměřen na detailní analýzu chemické heterogenity laserových návarů Inconel 625 se zvýšeným obsahem molybdenu. V rámci experimentálního programu bylo připraveno celkem 5 kusů vzorků laserových návarů o celkové ploše 100*150 mm…