Antonio Bertei
YOU?
Author Swipe
View article: Unravelling electro-chemo-mechanical processes in graphite/silicon composites for designing nanoporous and microstructured battery electrodes
Unravelling electro-chemo-mechanical processes in graphite/silicon composites for designing nanoporous and microstructured battery electrodes Open
Silicon is a promising negative electrode material for high-energy batteries, but its volume changes during cell cycling cause rapid degradation, limiting its loading to about 10 wt.% in conventional graphite/Si composite electrodes. Overc…
View article: Electrochemical diffusion signatures of solid-solution and phase-separating active materials in Li-ion batteries
Electrochemical diffusion signatures of solid-solution and phase-separating active materials in Li-ion batteries Open
The working principle of lithium-ion batteries lies in the intercalation of lithium ions in electrode active materials, which exhibit either solid-solution or phase-separating behaviour. This study presents a comparative analysis of the el…
View article: Requirements for Applying the Current Interruption Technique for Reconstructing the Impedance of Li-Ion Batteries
Requirements for Applying the Current Interruption Technique for Reconstructing the Impedance of Li-Ion Batteries Open
Electrochemical impedance spectroscopy is a non-destructive technique that provides useful information on the status of a lithium-ion battery, including its state-of-health. However, conventional harmonic perturbation methods are too sophi…
View article: System-Level Dynamic Model of Redox Flow Batteries (RFBs) for Energy Losses Analysis
System-Level Dynamic Model of Redox Flow Batteries (RFBs) for Energy Losses Analysis Open
This paper presents a zero-dimensional dynamic model of redox flow batteries (RFBs) for the system-level analysis of energy loss. The model is used to simulate multi-cell systems considering the effect of design and operational parameters …
View article: Phase segregation of a partially miscible binary mixture subjected to an external force field
Phase segregation of a partially miscible binary mixture subjected to an external force field Open
When a partially miscible binary mixture is quenched below its critical temperature, it transitions from its single-phase to a two-phase region, undergoing phase separation. The processes of formation and coalescence of droplets are driven…
View article: A High Capacity Gas Diffusion Electrode for Li–O<sub>2</sub> Batteries
A High Capacity Gas Diffusion Electrode for Li–O<sub>2</sub> Batteries Open
The very high theoretical specific energy of the lithium–air (Li–O 2 ) battery (3500 Wh kg −1 ) compared with other batteries makes it potentially attractive, especially for the electrification of flight. While progress has been made in re…
View article: Critical comparison of equivalent circuit and physics-based models for lithium-ion batteries: A graphite/lithium-iron-phosphate case study
Critical comparison of equivalent circuit and physics-based models for lithium-ion batteries: A graphite/lithium-iron-phosphate case study Open
View article: Advancing electrochemical impedance analysis through innovations in the distribution of relaxation times method
Advancing electrochemical impedance analysis through innovations in the distribution of relaxation times method Open
View article: Assessing performance in lithium-ion batteries recycling processes: A quantitative modeling perspective
Assessing performance in lithium-ion batteries recycling processes: A quantitative modeling perspective Open
View article: Intercalation in Li-ion batteries: thermodynamics and its relation to non-ideal solid-state diffusion
Intercalation in Li-ion batteries: thermodynamics and its relation to non-ideal solid-state diffusion Open
Intercalation is the key phenomenon taking place in lithium-ion batteries: while its thermodynamics sets the equilibrium voltage of active materials, solid-state diffusion of intercalated lithium determines the rate at which the battery ca…
View article: System-Level Dynamic Model of Redox Flow Batteries (Rfbs) for Energy Losses Analysis
System-Level Dynamic Model of Redox Flow Batteries (Rfbs) for Energy Losses Analysis Open
View article: 3D printed zeolite monoliths as open-source spare parts for oxygen concentrators
3D printed zeolite monoliths as open-source spare parts for oxygen concentrators Open
Oxygen concentrators are essential medical devices for basic emergency care, surgery and treatment for chronic and acute respiratory diseases. Despite their reliability and accessibility, they require spare parts which can be difficult to …
View article: Identifiability of the mechanisms governing the reaction kinetics of MIEC electrodes in solid oxide cells
Identifiability of the mechanisms governing the reaction kinetics of MIEC electrodes in solid oxide cells Open
View article: Multiscale dynamics of charging and plating in graphite electrodes coupling operando microscopy and phase-field modelling
Multiscale dynamics of charging and plating in graphite electrodes coupling operando microscopy and phase-field modelling Open
View article: Deliverable 3.5: Report on techno-economic modelling
Deliverable 3.5: Report on techno-economic modelling Open
Data for reproducing the results presented in Deliverable 3.5 "Report on techno-economic modelling" belonging to the CompBat EU project, DOI:10.3030/875565
View article: Deliverable 3.4: Report of modelling flow batteries with the solid boosters
Deliverable 3.4: Report of modelling flow batteries with the solid boosters Open
Data for reproducing the results presented in Deliverable 3.4 "Report of modelling flow batteries with the solid boosters" belonging to the CompBat EU project, DOI:10.3030/875565
View article: Deliverable 3.5: Report on techno-economic modelling
Deliverable 3.5: Report on techno-economic modelling Open
Data for reproducing the results presented in Deliverable 3.5 "Report on techno-economic modelling" belonging to the CompBat EU project, DOI:10.3030/875565
View article: Deliverable 3.3: Report on multi-cells stack system and shunt current distribution modelling
Deliverable 3.3: Report on multi-cells stack system and shunt current distribution modelling Open
Data for reproducing the results presented in Deliverable 3.3 "Report on multi-cells stack system and shunt current distribution modelling" belonging to the CompBat EU project, DOI:10.3030/875565
View article: Deliverable 3.4: Report of modelling flow batteries with the solid boosters
Deliverable 3.4: Report of modelling flow batteries with the solid boosters Open
Data for reproducing the results presented in Deliverable 3.4 "Report of modelling flow batteries with the solid boosters" belonging to the CompBat EU project, DOI:10.3030/875565
View article: Deliverable 3.3: Report on multi-cells stack system and shunt current distribution modelling
Deliverable 3.3: Report on multi-cells stack system and shunt current distribution modelling Open
Data for reproducing the results presented in Deliverable 3.3 "Report on multi-cells stack system and shunt current distribution modelling" belonging to the CompBat EU project, DOI:10.3030/875565
View article: Why charging Li–air batteries with current low-voltage mediators is slow and singlet oxygen does not explain degradation
Why charging Li–air batteries with current low-voltage mediators is slow and singlet oxygen does not explain degradation Open
View article: Fabrication and electrochemical modelling of 8YSZ and GDC10 freeze tape cast scaffolds for solid oxide cells (SOCs)
Fabrication and electrochemical modelling of 8YSZ and GDC10 freeze tape cast scaffolds for solid oxide cells (SOCs) Open
The morphology of electrodes in Solid Oxide Cells (SOCs) has a great impact on their
\nmechanical stability during operation as well as transport properties and kinetics, which in
\nturn affect electrode and cell performance. This study pr…
View article: Assessing Performance in Lithium-Ion Batteries Recycling Processes: A Quantitative Modeling Perspective
Assessing Performance in Lithium-Ion Batteries Recycling Processes: A Quantitative Modeling Perspective Open
View article: A comprehensive review and classification of unit operations with assessment of outputs quality in lithium-ion battery recycling
A comprehensive review and classification of unit operations with assessment of outputs quality in lithium-ion battery recycling Open
Lithium-ion batteries (LIBs) are the core component of the electrification transition, being used in portable electronics, electric vehicles, and stationary energy storage. The exponential growth of LIB use generates a large flow of spent …
View article: Enabling early detection of lithium-ion battery degradation by linking electrochemical properties to equivalent circuit model parameters
Enabling early detection of lithium-ion battery degradation by linking electrochemical properties to equivalent circuit model parameters Open
View article: Recycling of Lithium-Ion Batteries: Overview of Existing Processes, Analysis and Performance
Recycling of Lithium-Ion Batteries: Overview of Existing Processes, Analysis and Performance Open
Lithium-ion batteries (LIBs) have become a widespread technology for electrochemical energy storage in the current era of digitalization and transport electrification, being used as electric stationary storage as well as for powering elect…
View article: Guiding the Design of Heterogeneous Electrode Microstructures for Li‐Ion Batteries: Microscopic Imaging, Predictive Modeling, and Machine Learning
Guiding the Design of Heterogeneous Electrode Microstructures for Li‐Ion Batteries: Microscopic Imaging, Predictive Modeling, and Machine Learning Open
Electrochemical and mechanical properties of lithium‐ion battery materials are heavily dependent on their 3D microstructure characteristics. A quantitative understanding of the role played by stochastic microstructures is critical for the …
View article: Thermodynamics, Charge Transfer and Practical Considerations of Solid Boosters in Redox Flow Batteries
Thermodynamics, Charge Transfer and Practical Considerations of Solid Boosters in Redox Flow Batteries Open
Solid boosters are an emerging concept for improving the performance and especially the energy storage density of the redox flow batteries, but thermodynamical and practical considerations of these systems are missing, scarce or scattered …
View article: Multi-length scale microstructural design of lithium-ion battery electrodes for improved discharge rate performance
Multi-length scale microstructural design of lithium-ion battery electrodes for improved discharge rate performance Open
Microstructural design strategies across multiple length scales for improved rate performance of automotive battery electrodes, assisted by physics-based microstructure-resolved model.
View article: Thermo-mechanical analysis of 3D manufactured electrodes for solid oxide fuel cells
Thermo-mechanical analysis of 3D manufactured electrodes for solid oxide fuel cells Open