Asiful H. Seikh
YOU?
Author Swipe
View article: Retraction notice to “Optimization and prediction of CBN tool life sustainability during AA1100 CNC turning by response surface methodology” [Heliyon 9 (2023) e18807]
Retraction notice to “Optimization and prediction of CBN tool life sustainability during AA1100 CNC turning by response surface methodology” [Heliyon 9 (2023) e18807] Open
[This retracts the article DOI: 10.1016/j.heliyon.2023.e18807.].
View article: Investigational studies on characteristics of Nano Silicon Nitride Incorporated AA8050 composites
Investigational studies on characteristics of Nano Silicon Nitride Incorporated AA8050 composites Open
This current work, studied the effects of nano silicon nitride (n-Si3N4) particles incorporated with AA8050 matrix using a stir-casting method. Physical characteristics including density and porosity were measured. The mechanical character…
View article: Maximizing the functional properties of epoxy coatings using milled Al for enhanced mechanical strength and corrosion resistance
Maximizing the functional properties of epoxy coatings using milled Al for enhanced mechanical strength and corrosion resistance Open
Herein, epoxy coatings modified with milled aluminum (Al) were tested for their mechanical strength and corrosion resistance. First, milling was performed on the as-received Al powder for 70 h. The obtained powder postmilling was added to …
View article: Failure analysis of additively manufactured PLA with different morphological arrangements in erosive flow
Failure analysis of additively manufactured PLA with different morphological arrangements in erosive flow Open
This study investigated the impact of water-sand slurry on Polylactic Acid (PLA) in Fused Deposition Modeling (FDM), exploring different morphologies and variables using Taguchi design. Variables included three designs (D1: Flat, D2: Groov…
View article: Reliability Assessment of Gored Elbow in Erosive Two-Phase Flow with Sand Particles
Reliability Assessment of Gored Elbow in Erosive Two-Phase Flow with Sand Particles Open
Erosion, a major threat to the safety and reliability of piping components, can significantly impact their integrity and functionality. This study employs computational fluid dynamics (CFD) to systematically investigate the erosion behavio…
View article: Investigation and performance analysis of eco-friendly coco fiber concrete hybridized with CNT blend
Investigation and performance analysis of eco-friendly coco fiber concrete hybridized with CNT blend Open
With the development of the technical trend, concrete using waste alternate material instead of sand material found economic potential for good structural behaviour. Besides, the susceptible crack, low strength-to-weight ratio, and low com…
View article: Improvement of mechanical performance on zirconium dioxide nanoparticle synthesized magnesium alloy nano composite
Improvement of mechanical performance on zirconium dioxide nanoparticle synthesized magnesium alloy nano composite Open
With excellent mechanical properties and distinct solidification, the AZ31B series magnesium alloy has great potential for targeting engineering applications and synthesized via die casting process found a drawback on oxidation results por…
View article: Experimental and numerical study of erosive wear of t-pipes in multiphase flow
Experimental and numerical study of erosive wear of t-pipes in multiphase flow Open
Erosive wear is inexorable in chemical and hydrocarbon transportation systems. In this study, the worn surface morphologies and erosive wear mechanisms were discussed to analyze the primary mechanism of erosion in Tee (T) pipe configuratio…
View article: A truncated octahedron NaCe(MoO<sub>4</sub>)<sub>2</sub> nanostructure: a potential material for blue emission and acetone sensing
A truncated octahedron NaCe(MoO<sub>4</sub>)<sub>2</sub> nanostructure: a potential material for blue emission and acetone sensing Open
Scheelite-type NaCe(MoO 4 ) 2 , a promising nanostructure for optoelectronic applications, has been synthesized using a typical hydrothermal technique, and its structural and microstructural properties have been characterized using several…
View article: Production of green hydrogen from sewage sludge / algae in agriculture diesel engine: Performance Evaluation
Production of green hydrogen from sewage sludge / algae in agriculture diesel engine: Performance Evaluation Open
View article: Multifunctional NaEu(WO<sub>4</sub>)<sub>2</sub>: defect-tuned red emission and acetone sensing at room temperature
Multifunctional NaEu(WO<sub>4</sub>)<sub>2</sub>: defect-tuned red emission and acetone sensing at room temperature Open
Defects of NaEu(WO 4 ) 2 were controlled by varying Na 3 cit during hydrothermal synthesis. The least defective material shows the highest red emission, whereas the most defective material exhibits acetone sensing at room temperature.
View article: Feature of SiO2 concentration on solar thermal functional characteristics of flat plate solar collector
Feature of SiO2 concentration on solar thermal functional characteristics of flat plate solar collector Open
Solar collectors configured with flat plate innovation pushed to drive the prime role in research in solar renewable energy due to economic, sustainable, and eco-friendly. Besides, the low thermal efficiency and heat loss are the major dra…
View article: Hydroxyapatite–Clay Composite for Bone Tissue Engineering: Effective Utilization of Prawn Exoskeleton Biowaste
Hydroxyapatite–Clay Composite for Bone Tissue Engineering: Effective Utilization of Prawn Exoskeleton Biowaste Open
Hydroxyapatite (HA, Ca10(PO4)6(OH)2)-based porous scaffolds have been widely investigated in the last three decades. HA, with excellent biocompatibility and osteoconductivity, has made this material widely used in bone tissue engineering. …
View article: CCDC 2237135: Experimental Crystal Structure Determination
CCDC 2237135: Experimental Crystal Structure Determination Open
An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available …
View article: Study on Process Parameters in Hydrothermal Liquefaction of Rice Straw and Cow Dung: Product Distribution and Application of Biochar in Wastewater Treatment
Study on Process Parameters in Hydrothermal Liquefaction of Rice Straw and Cow Dung: Product Distribution and Application of Biochar in Wastewater Treatment Open
In this study, rice straw (RS) and cow dung (CD) waste were hydrothermally processed for the recovery of bio-oil and biochar. The hydrothermal experiments were performed in a 5 L capacity reactor under the following process conditions: tem…
View article: RETRACTED: A novel study on the influence of graphene-based nanofluid concentrations on the response characteristics and surface-integrity of Hastelloy C-276 during minimum quantity lubrication
RETRACTED: A novel study on the influence of graphene-based nanofluid concentrations on the response characteristics and surface-integrity of Hastelloy C-276 during minimum quantity lubrication Open
View article: Impact of Oxy-Additives on diesel engine performance and emission parameters using Waste cooking oil biodiesel
Impact of Oxy-Additives on diesel engine performance and emission parameters using Waste cooking oil biodiesel Open
From the last two decades, the amount of waste materials recycled into useable energy sources has grown in popularity due to the fast rise in energy demand caused by the world's population growth. In other words, the conversion of garbage …
View article: EXTRACTION, PERFORMANCE AND EMISSION CHARACTERIZATION OF DIESEL ENGINE USING WASTE LIPOLYTIC MICROORGANISM BIODIESEL
EXTRACTION, PERFORMANCE AND EMISSION CHARACTERIZATION OF DIESEL ENGINE USING WASTE LIPOLYTIC MICROORGANISM BIODIESEL Open
In this study, milk waste water will be extracted, transformed into Lipolytic microorganism’s biodiesel (LMD) using transesterification, and tested for appropriateness as an alternative, sustainable, renewable source for IC engines. The pr…
View article: RETRACTED: Optimization and prediction of CBN tool life sustainability during AA1100 CNC turning by response surface methodology
RETRACTED: Optimization and prediction of CBN tool life sustainability during AA1100 CNC turning by response surface methodology Open
View article: Investigation on mechanical properties and corrosion resistance of Ti-modified AA5083 aluminum alloy for aerospace and automotive applications
Investigation on mechanical properties and corrosion resistance of Ti-modified AA5083 aluminum alloy for aerospace and automotive applications Open
View article: Thermodynamical study of chemically-reactive and thermal-radiative magnetized oscillatory Couette flow in a porous medium filled channel
Thermodynamical study of chemically-reactive and thermal-radiative magnetized oscillatory Couette flow in a porous medium filled channel Open
The thermodynamical study of a mathematical model of unsteady natural convective MHD oscillatory flow through a porous medium-filled channel of infinite plates with chemical reaction and thermal radiation effect is taken into account in th…
View article: Effect of Pulsation in Microstructure and Mechanical Properties of Titanium Alloy-Annealed Welded Joints at Different Temperatures
Effect of Pulsation in Microstructure and Mechanical Properties of Titanium Alloy-Annealed Welded Joints at Different Temperatures Open
Thin sheets of Ti-6Al-4V alloy of thickness 1 mm were butt welded using a pulsed Nd-YAG low-power laser setup. The goal of this research is to explore the influence of pulsation on the microstructure and mechanical properties. In addition …
View article: Corrosion Resistance Performance of Epoxy Coatings Incorporated with Unmilled Micro Aluminium Pigments
Corrosion Resistance Performance of Epoxy Coatings Incorporated with Unmilled Micro Aluminium Pigments Open
The current work is in continuation of our previous work where we reported changes in the properties of epoxy coatings using two different types of hardener in different stoichiometric ratios. The best results-oriented coating stoichiometr…
View article: Fabrication and Characterization of SiC-reinforced Aluminium Matrix Composite for Brake Pad Applications
Fabrication and Characterization of SiC-reinforced Aluminium Matrix Composite for Brake Pad Applications Open
The wear debris from conventional brake pads is a growing source of environmental contamination that often leads to life-threatening diseases for human beings. Though the emerging organic brake pads show potential to serve as an eco-friend…
View article: Performance enhancement of water output via latent heat storage system with single slope solar stills
Performance enhancement of water output via latent heat storage system with single slope solar stills Open
The purpose of this study was to design, build, and assess the performance of a latent heat storage system in tandem with a single slope solar still. Using a solar accumulator to transfer hot water to a shell and a spiral finned tube fille…
View article: Performance investigation of single-slope solar stills with dripping arrangement and nano ZrO2 particles
Performance investigation of single-slope solar stills with dripping arrangement and nano ZrO2 particles Open
In many parts of the world, fresh drinking water is in short supply. The solar still produced a daily output of only 3 L, but it was used in providing a sustainable supply of clean drinking water. The climate of Kanyakumari district, Tamil…
View article: Mechanical Alloying of Ball-Milled Cu–Ti–B Elemental Powder with the In Situ Formation of Titanium Diboride
Mechanical Alloying of Ball-Milled Cu–Ti–B Elemental Powder with the In Situ Formation of Titanium Diboride Open
This paper represents the fabrication and characterization (microstructural, mechanical, and electrical) of Cu-2wt% B-4 wt% Ti and Cu-5wt% B-10wt% Ti alloy from the ball-milled Cu, Ti, and B powders. The in situ formation of TiB2 was also …
View article: Development and Characterization of PA 450 and PA 3282 Epoxy Coatings as Anti-Corrosion Materials for Offshore Applications
Development and Characterization of PA 450 and PA 3282 Epoxy Coatings as Anti-Corrosion Materials for Offshore Applications Open
The optimization of two different types of hardeners, namely polyaminoamine adduct (Aradur 450 BD) and polyamidoamine adduct (Aradur 3282 BD), with diglycidyle ether of bisphenol-A (DGEBA) epoxy resin was carried out. Three different stoic…
View article: Effect of Heat Treatment on Tensile Properties and Microstructure of Co-Free, Low Ni-10 Mo-1.2 Ti Maraging Steel
Effect of Heat Treatment on Tensile Properties and Microstructure of Co-Free, Low Ni-10 Mo-1.2 Ti Maraging Steel Open
Production of high-quality maraging steel is dependent not only on the production technology but also on the alloying design and heat treatment. In this work, cobalt-free, low nickel, molybdenum-containing maraging steel was produced by me…
View article: Tribo-Behavior and Corrosion Properties of Welded 304L and 316L Stainless Steel
Tribo-Behavior and Corrosion Properties of Welded 304L and 316L Stainless Steel Open
The present study investigates the electrochemical corrosion response and tribo-behavior of 304L and 316L stainless steel welded by gas metal arc welding (GMAW), which offered a high deposition rate. During this research, the metallurgical…