Bashir Salah
YOU?
Author Swipe
View article: High-sensitivity surface plasmon resonance biosensor with gold-based metasurfaces and polynomial regression optimization for early breast cancer detection
High-sensitivity surface plasmon resonance biosensor with gold-based metasurfaces and polynomial regression optimization for early breast cancer detection Open
Early-stage breast cancer detection is critical for improving diagnostic accuracy and treatment outcomes. This study presents a graphene-enhanced metasurface biosensor designed to provide high sensitivity, predictive precision, and secure …
View article: Elevating green materials sustainability through the integration of ceramic particles
Elevating green materials sustainability through the integration of ceramic particles Open
The use of natural fibers as reinforcements in polymer composites has seen significant growth over recent decades. Despite their potential, these fibers face limitations in high‐temperature environments. To address this, ceramic particles …
View article: A mathematical model of Casson nanofluid flow over a vertically stretched porous surface along with bioconvection, Joule heating and thermal Robin conditions
A mathematical model of Casson nanofluid flow over a vertically stretched porous surface along with bioconvection, Joule heating and thermal Robin conditions Open
The current analysis aims is to investigate the steady-state visco-plastic Casson nanofluid flow over an electrically conducting stretching porous surface. Thermophoresis and Brownian motion parameters are utilized for modeling and analysi…
View article: Diagnosis of TB Granuloma in SLE Patient by Kidney Biopsy
Diagnosis of TB Granuloma in SLE Patient by Kidney Biopsy Open
Lupus Nephritis is a common clinical manifestation affecting more than 50% of patients with Systemic Lupus Erythematosus (SLE), a chronic autoimmune disease that can affect virtually any organ. Whilst lupus nephritis is typically detected …
View article: Peritoneal Dialysis in High-Risk Occupations.
Peritoneal Dialysis in High-Risk Occupations. Open
Renal Replacement Therapy (RRT), involving two modalities of dialysis, namely haemodialysis (HD) and/or peritoneal dialysis (PD) remain the mainstay of therapy for patients with End Stage Renal Disease (ESRD) worldwide. The goals of renal …
View article: Initial Presentation of SLE among the Different South African Ethnic Groups
Initial Presentation of SLE among the Different South African Ethnic Groups Open
Background: Systemic lupus erythematosus (SLE) is a chronic, immune-mediated, inflammatory multi-organ disease. It is characterized by a variety of clinical features including abnormalities of the joints, skin, kidneys, lungs, heart, blood…
View article: Regional Transportation’s Planning Implications for Large Cities
Regional Transportation’s Planning Implications for Large Cities Open
Internationally, the number of large cities and megacities is growing. The way major cities and megacities manage their unique advantages and hazards will either degrade or improve the quality of life for their residents. Lack of new trans…
View article: Risk prioritization using a modified FMEA analysis in industry 4.0
Risk prioritization using a modified FMEA analysis in industry 4.0 Open
To assess the reliability of production systems, a Failure Mode and Effects Analysis (FMEA) is usually performed to determine how reliable a system is in its entirety. In order to ensure smooth production operations and timely delivery of …
View article: Exploring the mechanical, tribological, and morphological characteristics of areca fiber epoxy composites reinforced with various fillers for multifaceted applications
Exploring the mechanical, tribological, and morphological characteristics of areca fiber epoxy composites reinforced with various fillers for multifaceted applications Open
This investigation is primarily concerned with the effect of fly ash, basalt powder, and tungsten carbide (WC) on the mechanical, microstructural, and tribological behaviour of areca fiber-reinforced composites. The fillers (5–10 wt. %) we…
View article: Synthesis of graphene oxide (GO) and reduced graphene oxide (rGO) and their application as nano-fillers to improve the physical and mechanical properties of medium density fiberboard
Synthesis of graphene oxide (GO) and reduced graphene oxide (rGO) and their application as nano-fillers to improve the physical and mechanical properties of medium density fiberboard Open
Graphene is an advanced material in the carbon group and offers greater mechanical, electrical, structural, and optical properties. Graphene oxide (GO) and reduced graphene oxide (rGO) nanoparticles were synthesized and characterized and t…
View article: Building a Sustainable Future from Theory to Practice: A Comprehensive PRISMA-Guided Assessment of Compressed Stabilized Earth Blocks (CSEB) for Construction Applications
Building a Sustainable Future from Theory to Practice: A Comprehensive PRISMA-Guided Assessment of Compressed Stabilized Earth Blocks (CSEB) for Construction Applications Open
Compressed stabilized earth blocks (CSEBs) offer a cheaper and environmentally sustainable alternative to traditional building materials for construction. In addition to addressing waste disposal difficulties, the inclusion of waste additi…
View article: Optimal Scheduling of Rainwater Collection Vehicles: Mixed Integer Programming and Genetic Algorithms
Optimal Scheduling of Rainwater Collection Vehicles: Mixed Integer Programming and Genetic Algorithms Open
Due to climate change, some areas in the world witnessed higher levels of heavy rain than the capacity of the wastewater system of the streets. Therefore, water tankers are used for the dewatering process to take the extra rainwater from t…
View article: Experimental study to optimize cold working, aging temperature, and time on the properties of AA6061 tubes: analysis using design of experiment
Experimental study to optimize cold working, aging temperature, and time on the properties of AA6061 tubes: analysis using design of experiment Open
The purpose of this study is to examine the impact of various process parameters, such as cold work, aging temperature, and aging time, on the yield strength, ultimate tensile strength (UTS), and elongation of AA6061 tubes. The experimenta…
View article: Impact of moisture content, closing speed, and pressurizing speed on the performance of medium density fiberboard (MDF)
Impact of moisture content, closing speed, and pressurizing speed on the performance of medium density fiberboard (MDF) Open
The purpose of this research is to investigate the impact of moisture content, closing speed, and pressurizing speed of hot press on the density, uniformity of density distribution, and properties of Medium Density Fiberboard (MDF) product…
View article: Correction: Cho et al. A Proposed Waiting Time Algorithm for a Prediction and Prevention System of Traffic Accidents Using Smart Sensors. Electronics 2022, 11, 1765
Correction: Cho et al. A Proposed Waiting Time Algorithm for a Prediction and Prevention System of Traffic Accidents Using Smart Sensors. Electronics 2022, 11, 1765 Open
The authors wish to make the following corrections to their paper [...]
View article: Performance, Emission, and Spectroscopic Analysis of Diesel Engine Fuelled with Ternary Biofuel Blends
Performance, Emission, and Spectroscopic Analysis of Diesel Engine Fuelled with Ternary Biofuel Blends Open
The demand for sustainable alternative-fuels in the transportation and agriculture domains is essential due to the quick depletion of petroleum supplies and the growing environmental challenges. The ternary-blends (diesel, biodiesel, and M…
View article: Central composite design application in the optimization of the effect of pumice stone on lightweight concrete properties using RSM
Central composite design application in the optimization of the effect of pumice stone on lightweight concrete properties using RSM Open
Among other lightweight aggregates, one choice is pumice stone (PS), which can replace coarse aggregates in concrete. In this study, the natural coarse aggregates are replaced by various percentages of PS in concrete to examine its physica…
View article: BukaGini: A Stability-Aware Gini Index Feature Selection Algorithm for Robust Model Performance
BukaGini: A Stability-Aware Gini Index Feature Selection Algorithm for Robust Model Performance Open
Feature interaction is a vital aspect of Machine Learning (ML) algorithms, and gaining a deep understanding of these interactions can significantly enhance model performance. This paper introduces the BukaGini algorithm, an innovative and …
View article: 3D Simulation of a Yogurt Filling Machine Using Grafcet Studio and Factory IO: Realization of Industry 4.0
3D Simulation of a Yogurt Filling Machine Using Grafcet Studio and Factory IO: Realization of Industry 4.0 Open
Manufacturing systems, enterprises and academic institutions worldwide are implementing industry 4.0 (IR4.0). By integrating the services and equipment, IR4.0 develops autonomous systems that manage industrial operations and exchange real-…
View article: Accuracy Improvement of Non-Intrusive Load Monitoring Using Voting-Based Consensus Clustering
Accuracy Improvement of Non-Intrusive Load Monitoring Using Voting-Based Consensus Clustering Open
Widespread inculcation of smart meter data in modern grid is motivating stakeholders to utilize it for demand response management and achieving energy sustainability goals. One of the methods being used in this regard is Non-Intrusive Load…
View article: Optimization of Exploration and Production Sharing Agreements Using the Maxi-Min and Nash Solutions
Optimization of Exploration and Production Sharing Agreements Using the Maxi-Min and Nash Solutions Open
Cooperation between supply chain partners in the oil industry is essential, especially when oil prices suffer from fluctuations that affect the profitability of each party. An essential task in oil field development projects is to create a…
View article: Parametric Investigation and Optimization to Study the Effect of Process Parameters on the Dimensional Deviation of Fused Deposition Modeling of 3D Printed Parts
Parametric Investigation and Optimization to Study the Effect of Process Parameters on the Dimensional Deviation of Fused Deposition Modeling of 3D Printed Parts Open
Fused deposition modeling (FDM) is the most economical additive manufacturing (AM) technology available for fabricating complex part geometries. However, the involvement of numerous control process parameters and dimensional instabilities …
View article: The Effect of Changes in Settings from Multiple Filling Points to a Single Filling Point of an Industry 4.0-Based Yogurt Filling Machine
The Effect of Changes in Settings from Multiple Filling Points to a Single Filling Point of an Industry 4.0-Based Yogurt Filling Machine Open
In process optimization, a process is adjusted so as to optimize a set of parameters while meeting constraints, with the objective to either minimize the total processing time or maximize the throughput. This article focused on the process…
View article: Energy Efficient Underlaid D2D Communication for 5G Applications
Energy Efficient Underlaid D2D Communication for 5G Applications Open
With the increasing importance of reduced-energy wireless communication in 5G networks, maximizing the energy efficiency of device-to-device (D2D) communication has gained a lot of research interest. But so far, the methods have only been …
View article: Effect of Ranque-Hilsch Vortex Tube Cooling to Enhance the Surface-Topography and Tool-Wear in Sustainable Turning of Al-5.6Zn-2.5Mg-1.6Cu-0.23Cr-T6 Aerospace Alloy
Effect of Ranque-Hilsch Vortex Tube Cooling to Enhance the Surface-Topography and Tool-Wear in Sustainable Turning of Al-5.6Zn-2.5Mg-1.6Cu-0.23Cr-T6 Aerospace Alloy Open
The aerospace metal cutting industry’s search for environmentally friendly practices that do not compromise machining performance is well known. One of the major objectives is the reduction in use of cutting fluids, which play a major role…
View article: Recent Progression Developments on Process Optimization Approach for Inherent Issues in Production Shop Floor Management for Industry 4.0
Recent Progression Developments on Process Optimization Approach for Inherent Issues in Production Shop Floor Management for Industry 4.0 Open
In the present industry revolution, operations management teams emphasize implementing an efficient process optimization approach with a suitable strategy for achieving operational excellence on the shop floor. Process optimization is used…
View article: Modeling and Optimization of Assembly Line Balancing Type 2 and E (SLBP-2E) for a Reconfigurable Manufacturing System
Modeling and Optimization of Assembly Line Balancing Type 2 and E (SLBP-2E) for a Reconfigurable Manufacturing System Open
This study undertakes the line balancing problem while allocating reconfigurable machines to different workstations. A multi-objective model is used to analyze the position of workstations, assignment of configurations to workstations, and…
View article: Robust Exploration and Production Sharing Agreements Using the Taguchi Method
Robust Exploration and Production Sharing Agreements Using the Taguchi Method Open
The short- and long-term volatility of oil and gas prices has a wide-ranging impact on both parties of petroleum contractual agreements, thus affecting the profitability of the project at any stage. Therefore, the government (first party) …
View article: An Efficient Approach to Investigate the Tradeoff between Double Handling and Needed Capacity in Automated Distribution Centers
An Efficient Approach to Investigate the Tradeoff between Double Handling and Needed Capacity in Automated Distribution Centers Open
Sustainable techniques in distribution centers, such as automation that reduces the land area needed, can be utilized. Automated Storage and Retrieval Systems (AS/RS) are used to efficiently manage the flow of pallets and carton cases in d…