Bouchaíb Hartiti
YOU?
Author Swipe
View article: WITHDRAWN: Effect of molar ratio TTIP:Acetylacetone stabilizer on structural and optoelectronics properties of TiO₂ thin films for DSSC solar cell
WITHDRAWN: Effect of molar ratio TTIP:Acetylacetone stabilizer on structural and optoelectronics properties of TiO₂ thin films for DSSC solar cell Open
The full text of this preprint has been withdrawn, as it was submitted in error. Therefore, the authors do not wish this work to be cited as a reference. Questions should be directed to the corresponding author.
View article: Optimization of quaternary compound kesterite Cu2ZnSnS4 (CZTS) optical band gap using dip-coating for photovoltaic absorbers
Optimization of quaternary compound kesterite Cu2ZnSnS4 (CZTS) optical band gap using dip-coating for photovoltaic absorbers Open
This study focuses on the synthesis of Cu2ZnSnS4 (CZTS) thin films, a promising material for photovoltaic absorbers, using the sol–gel method combined with dip-coating technique, and optimized through a Taguchi design of experiments. Six f…
View article: Phase-engineered 1T/2H MoS2 via spray coating: role of precursor concentration in structural and electronic tuning
Phase-engineered 1T/2H MoS2 via spray coating: role of precursor concentration in structural and electronic tuning Open
International audience
View article: WITHDRAWN: Effect of molar ratio TTIP:Acetylacetone stabilizer on structural and optoelectronics properties of TiO₂ thin films for DSSC solar cell
WITHDRAWN: Effect of molar ratio TTIP:Acetylacetone stabilizer on structural and optoelectronics properties of TiO₂ thin films for DSSC solar cell Open
This work investigates the effect of the molar ratio between the titanium precursor titanium tetraisopropoxide (TTIP) and the stabilizer acetylacetone (Act-ac) on the structural and optoelectronic properties of TiO₂ thin films, prepared by…
View article: Optimization of quaternary compound kesterite Cu2ZnSnS4 (CZTS) optical band gap using dip-coating for photovoltaic absorbers
Optimization of quaternary compound kesterite Cu2ZnSnS4 (CZTS) optical band gap using dip-coating for photovoltaic absorbers Open
This study focuses on the synthesis of Cu₂ZnSnS₄ (CZTS) thin films, a promising material for photovoltaic absorbers, using the sol-gel method combined with dip-coating technique, and optimized through a Taguchi design of experiments. Six f…
View article: Effect of Organic Solvent on the Physical Properties of Spin-Coated Tin Sulfide Thin Films
Effect of Organic Solvent on the Physical Properties of Spin-Coated Tin Sulfide Thin Films Open
In the current study, the sol-gel spin coating was used to deposit SnS thin films on ordinary glass substrates, and annealed without sulfurization at 500 °C. Different organic solvents such as ethanol, 2-methoxyethanol, and methanol were u…
View article: Experimental studies of dust accumulation and its effects on the performance of solar PV systems in Mediterranean climate
Experimental studies of dust accumulation and its effects on the performance of solar PV systems in Mediterranean climate Open
This study is an experimental investigation of the effect of natural dust deposition on the performance of three (PV) systems installed on the rooftop of the faculty of science and technology in the city of Mohammedia of Morocco in a Medit…
View article: Publisher’s note
Publisher’s note Open
This study is an experimental investigation of the effect of natural dust deposition on the performance of three (PV) systems installed on the rooftop of the faculty of science and technology in the city of Mohammedia of Morocco in a Medit…
View article: Experimental and numerical simulation studies of CuO thin films based solar cells
Experimental and numerical simulation studies of CuO thin films based solar cells Open
This study presents an experimental investigation into the solar performance of copper oxide (CuO) thin films. These CuO films were fabricated using the spray pyrolysis technique, and their structural, morpholigical, optical, and electrica…
View article: Preparation and Characterization of Nickel and Aluminum-Codoped SnO2 Thin Films for Optoelectronic Applications
Preparation and Characterization of Nickel and Aluminum-Codoped SnO2 Thin Films for Optoelectronic Applications Open
In this study, the coating technique was used to prepare thin layers of nickel and aluminum-codoped tin oxide (SnO2: Ni; Al). This study is aimed at exploring the influence of aluminum (Al) dopant on the structural, optical, and electrical…
View article: Effect of Dip-Coating Cycle on Some Physical Properties of Cu2NiSnS4 Thin Films for Photovoltaic Applications
Effect of Dip-Coating Cycle on Some Physical Properties of Cu2NiSnS4 Thin Films for Photovoltaic Applications Open
Quaternary semiconductor Cu 2 NiSnS 4 thin film was made by the sol-gel method associated to dip-coating technique on ordinary glass substrates. In this paper, we have studied the impact of dip-coating cycle at different cycles: 4, 5 and 6…
View article: The Use of Taguchi Method to Elaborate Good ZnO Thin Films by Sol Gel Associated to Dip Coating
The Use of Taguchi Method to Elaborate Good ZnO Thin Films by Sol Gel Associated to Dip Coating Open
ZnO thin films have been prepared by dip coating sol gel method using Taguchi technique. The underlying principle was to make something as little as conceivable the measure of examination and make sense of the best conditions for developin…
View article: Growth and Characterization of CZTS Thin Films Synthetized by Electrodeposition Method for Photovoltaic Applications
Growth and Characterization of CZTS Thin Films Synthetized by Electrodeposition Method for Photovoltaic Applications Open
In the present work we deposited CZTS absorber material using a one-step electrodeposition method on ITO glass substrates. We studied the effect of sulfurization temperature on structural, morphological and optical properties of CZTS thin …
View article: Diffusion of Phosphorus in Silicon Thin Films by Spin and Dip Coating
Diffusion of Phosphorus in Silicon Thin Films by Spin and Dip Coating Open
In this work, Spin coating and Dip coating techniques are used for the diffusion of phosphorus in silicon in order to realize the emitter of a silicon solar cell which is a very important and critical step in photovoltaic technology. Sever…
View article: Erratum: X-ray Diffraction, XPS, and Raman Spectroscopy of Coated ZnO:Al (1−7 at%) Nanoparticles
Erratum: X-ray Diffraction, XPS, and Raman Spectroscopy of Coated ZnO:Al (1−7 at%) Nanoparticles Open
Unfortunately, four author names were mistakenly omitted in the original article [1]. The missing authors and their affiliations are given below: Kitty Baert Vrije Universiteit Brussel, Dept. Materials and Chemistry, Electrochemical and Su…
View article: Toxic Materials Used in Thin Film Photovoltaics and Their Impacts on Environment
Toxic Materials Used in Thin Film Photovoltaics and Their Impacts on Environment Open
Photovoltaic industry has proved to be a growing and advantageous source of energy as it can be renewable, sustainable, reliable and clean. Significant improvements have been made in materials used and the production processes to reduce th…
View article: X-ray Diffraction, XPS, and Raman Spectroscopy of Coated ZnO:Al (1—7 at%) Nanoparticles
X-ray Diffraction, XPS, and Raman Spectroscopy of Coated ZnO:Al (1—7 at%) Nanoparticles Open
Group III elements doping for zinc oxide is currently attracting much attention for the study of absorber layer in nano-optoelectronic and photovoltaic devices as an alternative route to indium tin oxide (ITO) due to their optimized proper…
View article: Study of the Role of Window Layer Al0.8Ga0.2As on GaAs-based Solar Cells Performance
Study of the Role of Window Layer Al0.8Ga0.2As on GaAs-based Solar Cells Performance Open
Numerical simulation of various structures of a solar cell plays a crucial role in the design, performance prediction and the comprehension of the physics involved in their operation. It also allows of better understanding the different wa…
View article: Elaboration and Characterization of CuO Thin Films by Spray Pyrolysis Method for Gas Sensors Applications
Elaboration and Characterization of CuO Thin Films by Spray Pyrolysis Method for Gas Sensors Applications Open
Metal oxide semiconductor gas sensors are used in a various applications in environmental, industrial and medical field, for instance. They are relatively inexpensive compared to other sensing technologies, robust, lightweight, long lastin…
View article: Elaboration and Characterization of SnO2 Doped TiO2 Gas Sensors Deposited through Dip and Spin Coating Methods
Elaboration and Characterization of SnO2 Doped TiO2 Gas Sensors Deposited through Dip and Spin Coating Methods Open
Semiconductor functional materials play an increasingly important role in science and technology because of their unique optical, electrical, magnetic, catalytic and chemical properties.
\nThey are widely used in fields such as solar cell,…
View article: Elaboration and Characterization of SnS Thin Film for Gas Sensors Application
Elaboration and Characterization of SnS Thin Film for Gas Sensors Application Open
The tin sulfide (SnS) has p-type conductivity, high absorption coefficient (≥104 cm−1), […]
View article: Financial Analysis of Photovoltaic Installations in Burkina Faso
Financial Analysis of Photovoltaic Installations in Burkina Faso Open
This article focuses on the economic and financial calculations concerning the production of electrical energy from photovoltaic installations connected to the grid. The estimation of energy production is done in fifteen cities in Burkina …
View article: THE EFFECT OF SEVERAL PARAMETERS ON THE PERFORMANCE of CuInS2-BASED SOLAR CELLS USING THE SCAPS-1D SOFTWARE
THE EFFECT OF SEVERAL PARAMETERS ON THE PERFORMANCE of CuInS2-BASED SOLAR CELLS USING THE SCAPS-1D SOFTWARE Open
In this work, we have used one dimensional solar cells simulator SCAPS-1D (Solar Cell Capacitance Simulator) to design solar cells based on CuInS2 as the absorber material and study their device performances. Solar cells having a typical s…