Explanipedia

Comparative Analysis of Mechanical Properties in Hybrid Composites Using Neem and Indian almond Fiber Open

R. Srinivasan, S. Priyadharsini, C. Rajaravi, R. Venkatesan, C. Rathinasuriyan , et al. · 2024

This study examines the mechanical properties and microstructural aspects of epoxy composites that have been reinforced with neem and Indian almond fibers. These fibers were first treated with a 5% NaOH solution by immersing them in it, le…

Tribology analysis of MMT nanoclay alkali-treated coconut sheath reinforced hybrid composite Open

R. Srinivasan, N. Pragadish, E. S. Esakkiraj, M. Selvam, C. Rajaravi · 2023

This research paper focuses on the tribology analysis of MMT - Montmorillonite nanoclay alkali-treated coconut sheath reinforced hybrid composite. The study aims to analyze the mechanical properties of coconut sheath reinforced polymer com…

A Comparative Study on Ex-Situ & In-Situ Formed Metal Matrix Composites Open

B. Gobalakrishnan, C. Rajaravi, Gobikrishnan Udhayakumar, P.R. Lakshminarayanan · 2022

A CompArAtive Study on ex-Situ & in-Situ Formed metAl mAtrix CompoSiteS an attempt has been made to synthesize the aluminium based ex-situ (al-siC) and in-situ (al-TiB 2 ) formed metal matrix composites with varying weight percentage of re…

Comparative Analysis Over Tribology Characterization of TiAlN and TiAlSiN PVD Coating On Plasma Nitride Alloy 20 Open

R. Srinivasan, Sarangapani Palani, C. Rajaravi, S. Karthik · 2022

The nickel-iron-chromium (alloy 20) is enriching by hybrid surface treatment through plasma nitride (PN) and physical vapor deposition (PVD) process. The plasma nitriding process takes 12 hours at 500°C. Potentiodynamic testing is used to …

New Paradigm On The Mechanical Properties of In-Situ Formed By Al/TiB2 and Al/TiB2/Cu MMCs Open

C. Rajaravi, B. Gobalakrishnan, Amala Mithin Minther Singh A, ARUL FRANCO P, V. Sharun · 2022

In the current study, in-situ formed Al/6wt. % TiB2 and Al/6wt. % TiB2/4wt. % Cu Metal Matrix were investigated. Composites were made using the sir casting method, and both composites were compared. The composite is synthesized by combinin…

Effect of pouring temperature on cast Al/SiCp and Al/TiB 2 metal matrix composites Open

C. Rajaravi, B. Gobalakrishnan, P.R. Lakshminarayanan · 2019

The effect of pouring temperatures of an ex situ (Al/SiCp) and in situ (Al/TiB 2 ) metal matrix composites (MMCs) synthesized using stir casting method were studied. The Al/SiCp composite were fabricated by mixing of 6wt.% of SiCp into cas…

Heat Treatment of Al/TiB2 MMC with Different Moulds Open

C. Rajaravi, M. Sivabalan, M. Shivathanu, M. Thirumaran · 2018

In this work, A356 cast aluminium alloy with 6% TiB 2 in-situ formed MMCs have been fabricated using stir casting route and poured at sand and permanent moulds.The composite was synthesized using stir casting technique.The A356 cast alumin…

Effect of pouring temperature on A356-TiB 2 MMCs cast in sand and permanent moulds by in-situ method Open

C. Rajaravi, P.R. Lakshminarayanan · 2016

The paper describes a different condition of pouring temperature by sand and permanent mould to produce A356-6 wt% TiB 2 metal matrix composites by in-situ method salt metal reaction route. The observation of SEM micrographs shows particle…

Finite Element Modeling Analysis on In-Situ Al/TiB2 Metal Matrix Composites Open

C. Rajaravi, P.R. Lakshminarayanan, Keshavan Niranjan · 2016

Background/Objective: Hardness of Al/TiB2 Metal Matrix Composites (MMCs) fabricated through in-situ reaction technique is indirectly dependent on pouring temperature. The objective is to predict Hardness through FEA and compare with experi…

C. Rajaravi YOU? Author Swipe