Chithirai Pon Selvan
YOU?
Author Swipe
View article: Hybrid Neural Network Modeling of Mechanical Alloying Process Parameters and Alloy Performance Using Forward and Reverse Mapping
Hybrid Neural Network Modeling of Mechanical Alloying Process Parameters and Alloy Performance Using Forward and Reverse Mapping Open
Mechanical alloying (MA) process synthesizes a nanostructured Ti‐Mg‐Zr ternary alloy suitable for biomedical applications. The desirable characteristics of titanium, magnesium, and zirconium (such as high biocompatibility, corrosion resist…
View article: Integrated Assessment of Mechanical and Electrochemical Properties of Additively Manufactured <scp>IN</scp> 718 Alloy Using Taguchi and Super Ranking Approaches
Integrated Assessment of Mechanical and Electrochemical Properties of Additively Manufactured <span>IN</span> 718 Alloy Using Taguchi and Super Ranking Approaches Open
The increased adoption of IN 718 alloy in marine and aerospace applications faces critical challenges due to aggressive chloride‐induced degradation, making understanding its corrosion resistance imperative. Evaluating its mechanical perfo…
View article: Empirical Modeling and Osprey‐Based Optimization of <scp>AlSi10Mg</scp> Tensile Strength in Selective Laser Melting
Empirical Modeling and Osprey‐Based Optimization of <span>AlSi10Mg</span> Tensile Strength in Selective Laser Melting Open
AlSi10Mg alloy, known for its better strength‐to‐weight ratio, corrosion resistance, thermal stability, and castability, led to its use for widespread engineering applications. Optimizing tensile strength ensures better structural and func…
View article: Investigating fretting wear behavior of LPBF processed AlSi10Mg alloy under variable frequency and heat treatment conditions
Investigating fretting wear behavior of LPBF processed AlSi10Mg alloy under variable frequency and heat treatment conditions Open
This study examines the fretting wear behavior of AlSi10Mg alloy processed via Laser Powder Bed Fusion (LPBF) under different oscillation frequencies (5 Hz, 10 Hz, and 15 Hz) and heat treatment conditions (as-built, stress-relieved, T5, an…
View article: Investigation on Low Stress Scratching Abrasion Resistance Influencing Residual Stress in Nickel Chromium Alloyed Iron
Investigation on Low Stress Scratching Abrasion Resistance Influencing Residual Stress in Nickel Chromium Alloyed Iron Open
In thermal power plants, advanced wear-resistant alloyed irons have been used for over three decades to enhance the longevity of parts. Ni-hard irons, high chromium irons, and HCHC materials are commonly used in components like liners, bul…
View article: Multi‐Input Multi‐Output Modeling of Anthill Clay‐Bonded Sand Mold System Using Artificial Neural Networks: Forward and Reverse Predictions
Multi‐Input Multi‐Output Modeling of Anthill Clay‐Bonded Sand Mold System Using Artificial Neural Networks: Forward and Reverse Predictions Open
Anthill clay sand molding is characterized as a multi‐input, multi‐output system where molding sand properties, such as permeability, compression strength, collapsibility, and mold hardness, are affected by an array of process parameters, …
View article: Advancements and challenges in solar photovoltaic technologies: enhancing technical performance for sustainable clean energy – A review
Advancements and challenges in solar photovoltaic technologies: enhancing technical performance for sustainable clean energy – A review Open
Given the current state of sustainable, clean energy, most researchers are concentrating on alternative energy resources. Solar photovoltaic (PV) has become especially prominent in thematic research on energy these days. Research focusing …
View article: Computation Models for Tsunami Wave Propagation using Extended Cellular Automata
Computation Models for Tsunami Wave Propagation using Extended Cellular Automata Open
Using traditional models to simulate the propagation of large-scale tsunami waves leads to low accuracy and low efficiency. To ensure higher timing accuracy of tsunami wave spread, built an enhanced model that connects cellular automata wi…
View article: Comparative Study on the Effect of Tool Wear on Turning Mild Steel and Stainless Steel with a Ceramic Tool Insert Using Taguchi Method
Comparative Study on the Effect of Tool Wear on Turning Mild Steel and Stainless Steel with a Ceramic Tool Insert Using Taguchi Method Open
Machining is a critical aspect of metalworking since it is used to cut metal. Machine tools, particularly cutting tools, are critical in metalworking for successful metal cutting. They have a significant role in developing distinct shapes …
View article: Investigation into the End-Milling Parameters of Mg/B4C Metal Matrix Composites
Investigation into the End-Milling Parameters of Mg/B4C Metal Matrix Composites Open
The automotive, biomedical, and aerospace industries are attracted towards magnesium-based alloys and composites because they are among the lightest structural materials available and have significantly enhanced mechanical and physical cha…
View article: Improvement in the Machining Processes by Micro-Textured Tools during the Turning Process
Improvement in the Machining Processes by Micro-Textured Tools during the Turning Process Open
The cutting fluid’s lubrication affects a workpiece’s surface finish and cutting tool lifespan during turning. To optimize machine performance, appropriate lubrication is needed. Empirical experiments examined how machining factors affecte…
View article: Investigation of Mechanical and Wear Behaviour of Al5056-Carbon Nanotube -Graphene Hybrid MMCs using Powder Metallurgy Route
Investigation of Mechanical and Wear Behaviour of Al5056-Carbon Nanotube -Graphene Hybrid MMCs using Powder Metallurgy Route Open
Composites containing metal at least in two constituent parts are metal matrix composites. Another material may also be used like organic compounds or ceramics, in addition to a different metal. In the current work Al5056 aluminium powder …
View article: Evaluation of Mechanical and Wear Assessment of Al-1.2Si-0.75Fe/Mullite MMCs for Industrial Applications
Evaluation of Mechanical and Wear Assessment of Al-1.2Si-0.75Fe/Mullite MMCs for Industrial Applications Open
The outline idea is based on saddling the high quality and wear capacities of eminent engineered fortifications, for example with the lightweight and minimal effort of preparing or squandering fiery remains. There is almost no writing whic…
View article: Selective Laser Melting Parametric Optimization for Microhardness of 17-4 PH Stainless Steel
Selective Laser Melting Parametric Optimization for Microhardness of 17-4 PH Stainless Steel Open
The 17-4 PH stainless steel is a structural material possessing inherent properties suitable for employment in industrial applications. Selective Laser Melting (SLM) technology has overcome many shortcomings of conventional processing rout…
View article: Surface Roughness Optimization of Selective Laser Melting Printed 17-4 PH Stainless Steel Parts
Surface Roughness Optimization of Selective Laser Melting Printed 17-4 PH Stainless Steel Parts Open
The 17-4 PH stainless steel possesses distinguished applications due to its inherent properties. Higher surface roughness in Selective Laser Melting (SLM) parts limits their use in a wide range of applications. Higher surface roughness det…
View article: Numerical investigation of heat transfer enhancement in solar air heaters using polygonal-shaped ribs and grooves
Numerical investigation of heat transfer enhancement in solar air heaters using polygonal-shaped ribs and grooves Open
Solar air heating thermal systems have found extensive utilization in a broad array of industrial and residential settings, playing a pivotal role in the conversion and reclamation of solar energy. Implementing repeated artificial roughnes…
View article: Additive manufacturing of re-entrant structures: Well-tailored structures, unique properties, modelling approaches and real applications
Additive manufacturing of re-entrant structures: Well-tailored structures, unique properties, modelling approaches and real applications Open
Re-entrant (RE) structures arise from unique construction enabling them to yield a negative Poisson's ratio (NPR) under tension or compression loading, which is required in various applications such as pressure garments for hypertrophic sc…
View article: Optimization of stir casting and drilling process parameters of hybrid composites
Optimization of stir casting and drilling process parameters of hybrid composites Open
AA2219 alloy is widely used in aerospace and automobile applications, wherein the properties can be enhanced with 15% wt. of B4C reinforcement particles. Assembly task in aerospace application requires drilling millions of holes, and it is…
View article: Selective Laser Melting Process Parameter Optimization on Density and Corrosion Resistance of 17-4PH Stainless Steel
Selective Laser Melting Process Parameter Optimization on Density and Corrosion Resistance of 17-4PH Stainless Steel Open
The 17-4 PH Stainless Steel material is known for its higher strength and, therefore, extensively used to build structures for aerospace, automotive, biomedical, and energy applications.The parts must operate satisfactorily in different en…
View article: Stir Casting Process Analysis and Optimization for Better Properties in Al-MWCNT-GR-Based Hybrid Composites
Stir Casting Process Analysis and Optimization for Better Properties in Al-MWCNT-GR-Based Hybrid Composites Open
Pure aluminium poses inferior properties that limit its use in load-bearing applications. Reinforcing multiwall carbon nano-tube (solid lubricant) and graphene to aluminium matrix offers better (antifriction, hardness, and wear resistance)…
View article: Experimental Investigation of Effect of Fiber Length on Mechanical, Wear, and Morphological Behavior of Silane-Treated Pineapple Leaf Fiber Reinforced Polymer Composites
Experimental Investigation of Effect of Fiber Length on Mechanical, Wear, and Morphological Behavior of Silane-Treated Pineapple Leaf Fiber Reinforced Polymer Composites Open
The development of the best properties in polyester composite from pineapple leaf fiber (PALF) as a reinforcing material is a subject of interest. The properties of PALF are reliant upon fiber length, wherein technical difficulties in prod…
View article: Niger Seed Oil-Based Biodiesel Production Using Transesterification Process: Experimental Investigation and Optimization for Higher Biodiesel Yield Using Box–Behnken Design and Artificial Intelligence Tools
Niger Seed Oil-Based Biodiesel Production Using Transesterification Process: Experimental Investigation and Optimization for Higher Biodiesel Yield Using Box–Behnken Design and Artificial Intelligence Tools Open
The present work aims at cost-effective approaches for biodiesel conversion from niger seed (NS) oil by employing the transesterification process, Box–Behnken design (BBD), and artificial intelligence (AI) tools. The performances of biodie…
View article: Effect of Nanomaterials on Tribological and Mechanical Properties of Polymer Nanocomposite Materials
Effect of Nanomaterials on Tribological and Mechanical Properties of Polymer Nanocomposite Materials Open
The good adhesion and interfacial interaction between the nanomaterial and the matrix show that the low content polymer nanocomposite has better tribological and mechanical properties such as strength, modulus, fracture toughness, and fati…
View article: Analysis of Ethanol to Reduce Solid Particle Pollution in SI Engines
Analysis of Ethanol to Reduce Solid Particle Pollution in SI Engines Open
The present work carries out an experimental comparative analysis of the performance and emission of exhaust gases of the Otto cycle with four automotive times. The comparison was made between alternative fuels such as E10, E15, and E20, w…
View article: Continual improvement through ISO 9001 – An evidence based audit conducted in 200 organizations
Continual improvement through ISO 9001 – An evidence based audit conducted in 200 organizations Open
Continual improvement is the most significant element of ISO 9001. Inadequate research studies are found to make the assessment of Continual Improvement of certified organizations through an onsite audit. Researcher has spent 386 mandays o…
View article: Process performance evaluation in mechanical engineering industries in accordance with ISO 9001
Process performance evaluation in mechanical engineering industries in accordance with ISO 9001 Open
ISO 9001 standard provides a framework for monitoring, measurement, analysis and evaluation; which is an essence of the quality management system and the prime interest for stakeholders. The annual survey conducted by ISO indicate that maj…