Explanipedia

Tribological Behavior of Ni-P Electroless Coating of Inconel 625 with Multiwall Nano Carbon Tubes Open

D. Jayabalakrishnan, S. Senthil Kumar, R. Suthan, P. Babu Aurtherson, J. Elanchezhian , et al. · 2023

An attempt was taken to study the wear rate of coated Inconel 625 using 0.3 gm of multiwall carbon tubes (MWCNT).The coating was carried out by the Ni-P electroless coating method. The Ni-P-MWCNT coating was prepared by using nickel phosph…

Mechanical, Thermal Conductivity and Water Absorption of Hybrid Nano-Silica Coir Fiber Mat Reinforced Epoxy Resin Composites Open

Balaji Venkatesan, S. Ramasamy, D. Jayabalakrishnan, Joji Thomas, Karthikeyan Thangappan , et al. · 2022

The goal of this research is to show that epoxy resin (ER) / coir fiber mats (CFM) hybrid composite laminates with nano-silica particle (NP) reinforcement improve mechanical characteristics and water absorption. Lately, it has been employe…

Experimental Investigation on Mechanical Properties of A/GFRP, B/GFRP and AB/GFRP Polymer Composites Open

V. Ananda Natarajan, Ravi Samraj, D. Jayabalakrishnan, P. Prabhu · 2022

This study aims to reveal the consequence of thickness reinforcement on Fiber Laminates (Polyester Resin, Glass Fiber, Aluminum, and Bentonite) and to see if it can enhance the mechanical properties and resistance of laminates. Glass fiber…

Experimental Study on Surface Roughness and Flank Wear in Turning of Nimonic C263 under Dry Cutting Conditions Open

J. Francis Xavier, B. Ravi, D. Jayabalakrishnan, C. Ezilarasan, V. Jayaseelan , et al. · 2021

Aircraft component manufacturing sector is looking for high precision machining in aircraft components. The present work explores the operability of green manufacturing of Nimonic C263 using dry turning. Nimonic C263 is tough to turn owing…

Experimental Study on Graphene Coating Thermosetting Epoxy Polymer for the Manufacture of Electronic Circuit Boards Open

Balajik Rishna Bharathi Arunachalam, Ramesh Bapu Br, D. Jayabalakrishnan · 2021

Graphene is a microstructure of graphite that has enormous properties and is also one of the carbon allotropes. There are several metals with low strength. The properties of these metals can be increased by coating the graphene. The primar…

Interfacial performance of treated aluminum and Kevlar fibre on fibre metal laminated composites Open

Ramasamy Nallamuthu, J. Francis Xavier, R. Ramadoss, V. Jayaseelan, D. Jayabalakrishnan · 2021

The effect of Kevlar fibre surface modification and fibre hybridization on fibre metal laminates (FMLs) was investigated in this paper. Fibre metal laminates are interlaced layers of thin metals and fibre-reinforced plastics that constitut…

Comparison of Sugeno-type and Mamdani-type fuzzy inference systems for end milling process Open

N. Tamiloli, J. Venkatesan, G. S. S. Vinay, PagadalaManoj Sai, Shaik Mohammad Irfan , et al. · 2021

This paper is to study the Fuzzy inference processes and develop Sugeno-type and Mamdani-type fuzzy models for the end milling process. Comparison is made between the outcomes of the two Fuzzy inference schemes (FIS). The fundamental disti…

Influence of Pin Offset and Weave Pattern on the Performance of Al-Cu Joints Reinforced with Graphene Particles Open

M. Balasubramanian, D. Jayabalakrishnan · 2020

The friction stir welding technique is currently employed for different alloy combinations like magnesium, titanium, copper, nickel-based composites. Dissimilar materials may be efficiently joined by the process and this has been used in s…

Friction Stir Welding of Dissimilar Butt Joints with Novel Joint Geometry Open

D. Jayabalakrishnan, M. Balasubramanian · 2018

In this study, 1 mm thin sheets of AA 6061 and steel were welded by friction stir, with new joint geometry.Conventional friction stir welding develops high distortion to the specimen, particularly when the thickness is very small.In this p…

Friction Stir Welding of Dissimilar Butt Joints with Novel Joint Geometry Open

D. Jayabalakrishnan, M. Balasubramanian · 2018

D. Jayabalakrishnan YOU? Author Swipe