Christian Bailly
YOU?
Author Swipe
View article: Influence of physical ageing and fibre proximity on the local mechanical response of the Elium® thermoplastic composite matrix
Influence of physical ageing and fibre proximity on the local mechanical response of the Elium® thermoplastic composite matrix Open
View article: Eco-Friendly Blends of Recycled PET Copolymers with PLLA and Their Composites with Chopped Flax Fibres
Eco-Friendly Blends of Recycled PET Copolymers with PLLA and Their Composites with Chopped Flax Fibres Open
The structure and properties of blends of a novel polyethylene terephthalate copolymer (COPET) obtained by chemical recycling of commercial PET with high-molar-mass poly-L-lactide (PLLA) are investigated and compared to corresponding compo…
View article: Integrated Approach to Eco-Friendly Thermoplastic Composites Based on Chemically Recycled PET Co-Polymers Reinforced with Treated Banana Fibres
Integrated Approach to Eco-Friendly Thermoplastic Composites Based on Chemically Recycled PET Co-Polymers Reinforced with Treated Banana Fibres Open
A major societal issue of disposal and environmental pollution is raised by the enormous and fast-growing production of single-use polyethylene terephthalate (PET) bottles, especially in developing countries. To contribute to the problem s…
View article: High performance recycled CFRP composites based on reused carbon fabrics through sustainable mild solvolysis route
High performance recycled CFRP composites based on reused carbon fabrics through sustainable mild solvolysis route Open
A novel environmentally friendly recycling method is developed for large carbon-fibers reinforced-polymers composite panels whose efficiency is demonstrated through a proof-of-concept fabrication of a new composite part based on recycled f…
View article: Bio‐Sourced Poly <scp>l</scp>‐Lactide‐Flax Composites with Close to Maximum Stiffness at Low Fiber Content through Two‐Stage Annealing
Bio‐Sourced Poly <span>l</span>‐Lactide‐Flax Composites with Close to Maximum Stiffness at Low Fiber Content through Two‐Stage Annealing Open
Poly l ‐Lactide (PLLA) composites with short flax fibers (from 0 to 10 wt/wt%) with close to maximum theoretical stiffness are prepared by melt‐compounding and injection‐molding followed by a two‐step isothermal crystallization protocol th…
View article: Synergy between Phenoxy and CSR Tougheners on the Fracture Toughness of Highly Cross-Linked Epoxy-Based Composites
Synergy between Phenoxy and CSR Tougheners on the Fracture Toughness of Highly Cross-Linked Epoxy-Based Composites Open
A remarkable synergistic increase in fracture toughness by 130% is demonstrated for a CFRP high performance epoxy composite when adding an equal weight combination of phenoxy thermoplastic and core-shell rubber (CSR) toughening agents, as …
View article: High Performance Recycled CFRP Composites Based on Reused Carbon Fabrics Through Mild Solvolysis Route
High Performance Recycled CFRP Composites Based on Reused Carbon Fabrics Through Mild Solvolysis Route Open
An original wet recycling method is developed for large carbon-fibers reinforced-polymers composite panels, addressed through a proof-of-concept fabrication of a new composite part based on recycled fibers. The recycling process relies on …
View article: Nanomechanics serving polymer-based composite research
Nanomechanics serving polymer-based composite research Open
Tremendous progress in nanomechanical testing and modelling has been made during the last two decades. This progress emerged from different areas of materials science dealing with the mechanical behaviour of thin films and coatings, polyme…
View article: Enhanced fracture resistance of thermoset/thermoplastic interfaces through crack trapping in a morphology gradient
Enhanced fracture resistance of thermoset/thermoplastic interfaces through crack trapping in a morphology gradient Open
View article: Processing maps based on polymerization modelling of thick methacrylic laminates
Processing maps based on polymerization modelling of thick methacrylic laminates Open
View article: Ranking Broadband Microwave Absorption Performance of Multilayered Polymer Nanocomposites Containing Carbon and Metallic Nanofillers
Ranking Broadband Microwave Absorption Performance of Multilayered Polymer Nanocomposites Containing Carbon and Metallic Nanofillers Open
Because electromagnetic (EM) pollution of the environment is becoming such a pervasive issue, highly efficient solutions for EM protection are being keenly sought for. Our approach provides new avenues to simple, compact, and efficient bro…
View article: Smart Nanocomposites for Nanosecond Signal Control: The Nano4waves Approach
Smart Nanocomposites for Nanosecond Signal Control: The Nano4waves Approach Open
The NANO4WAVES project has demonstrated the potential of a clever organization of nanoscale inclusions in polymer matrices or inks, e.g., carbon nanotubes, graphene, metallic nanoparticles, for controlling the electromagnetic propagation a…
View article: Nanocomposites with size-controlled nickel nanoparticles supported on multi-walled carbon nanotubes for efficient frequency-selective microwave absorption
Nanocomposites with size-controlled nickel nanoparticles supported on multi-walled carbon nanotubes for efficient frequency-selective microwave absorption Open
View article: Flexible Multilayer Combining Nickel Nanowires and Polymer Films for Broadband Microwave Absorption
Flexible Multilayer Combining Nickel Nanowires and Polymer Films for Broadband Microwave Absorption Open
In front of electromagnetic (EM) pollution of theenvironment, EM protection requires more and more efficient so-lutions. Multilayered films consisting of alternating stacked nickelnanowires (NWs)-based conductive layers separated by bulk p…
View article: Wideband microwave absorption in thin nanocomposite films induced by a concentration gradient of mixed carbonaceous nanostructures
Wideband microwave absorption in thin nanocomposite films induced by a concentration gradient of mixed carbonaceous nanostructures Open
View article: Linear and Nonlinear Dynamic Behavior of Polymer Micellar Assemblies Connected by Metallo-Supramolecular Interactions
Linear and Nonlinear Dynamic Behavior of Polymer Micellar Assemblies Connected by Metallo-Supramolecular Interactions Open
The linear and nonlinear rheology of associative colloidal polymer assemblies with metallo-supramolecular interactions is herein studied. Polystyrene-b-poly(tert-butylacrylate) with a terpyridine ligand at the end of the acrylate block is …
View article: Highly Efficient Wideband Microwave Absorbers Based on Zero-Valent Fe@γ-Fe2O3 and Fe/Co/Ni Carbon-Protected Alloy Nanoparticles Supported on Reduced Graphene Oxide
Highly Efficient Wideband Microwave Absorbers Based on Zero-Valent Fe@γ-Fe2O3 and Fe/Co/Ni Carbon-Protected Alloy Nanoparticles Supported on Reduced Graphene Oxide Open
Electronic systems and telecommunication devices based on low-power microwaves, ranging from 2 to 40 GHz, have massively developed in the last decades. Their extensive use has contributed to the emergence of diverse electromagnetic interfe…
View article: Spatial resolution and property contrast in local mechanical mapping of polymer blends using AFM dynamic force spectroscopy
Spatial resolution and property contrast in local mechanical mapping of polymer blends using AFM dynamic force spectroscopy Open
View article: Specific influence of polyethersulfone functionalization on the delamination toughness of modified carbon fiber reinforced polymer processed by resin transfer molding
Specific influence of polyethersulfone functionalization on the delamination toughness of modified carbon fiber reinforced polymer processed by resin transfer molding Open
The specific influence of polyethersulfone (PES) end‐functionalization with chlorine or hydroxyl end groups at same molar mass on PES‐epoxy composites based on a high‐performance tetra‐epoxide with di‐amine hardener resin (RTM6) is investi…
View article: Micromechanics of deformation and fracture in highly cross-linked thermosets – impact on composite modelling
Micromechanics of deformation and fracture in highly cross-linked thermosets – impact on composite modelling Open
Advanced constitutive models for polymers have been essentially developed for thermoplastics with relatively limited applications/extensions to thermosets. Recent extensions of these constitutive models provide accurate predictions over a …
View article: Unveiling the nanoscale heterogeneity controlled deformation of thermosets
Unveiling the nanoscale heterogeneity controlled deformation of thermosets Open
View article: Polymer-matrix nanocomposites bombarded by large Ar clusters and low energy Cs ions: Sputtering and topography development
Polymer-matrix nanocomposites bombarded by large Ar clusters and low energy Cs ions: Sputtering and topography development Open
In secondary ion mass spectrometry, hybrid materials such as organic matrices loaded with inorganic nanoparticles (NPs) are notoriously difficult to depth profile with any known ion beam, including large Ar clusters, although they display …
View article: Micromechanics of deformation and fracture in highly cross-linked thermosets
Micromechanics of deformation and fracture in highly cross-linked thermosets Open
Advanced constitutive models for polymers have been essentially developed for thermoplastics with relatively\nlimited applications/extensions to thermosets. Thermosets differ from thermoplastics by the cross-linking. Recent\nextensions of …
View article: Flexible twist polarizer based on ultrathin multi‐layered polymer‐carbon nanotubes composite films
Flexible twist polarizer based on ultrathin multi‐layered polymer‐carbon nanotubes composite films Open
We present an ultrathin and flexible microwave broadband polarization transformer concept based on oriented carbon nanotubes dispersed in a polycarbonate matrix. Stacking anisotropic composite films with a controlled angle mismatch between…
View article: Simulation-driven mold compensation strategy for composites: Experimental validation on a doubly-curved part
Simulation-driven mold compensation strategy for composites: Experimental validation on a doubly-curved part Open
View article: Flexible polarization‐dependent absorbers based on patterned carbon nanotubes films
Flexible polarization‐dependent absorbers based on patterned carbon nanotubes films Open
We present a thin and flexible broadband polarizer‐absorber concept based on a multi‐layered anisotropic arrangement of carbon nanotubes (CNT) and polymer films. The anisotropic layers consist of CNT striplines deposited over a prepared po…
View article: Erratum for: Multilayer cylindrical invisibility cloak at microwave frequencies built from polymer and carbon nanotubes
Erratum for: Multilayer cylindrical invisibility cloak at microwave frequencies built from polymer and carbon nanotubes Open
In the above-mentioned article, which appeared in Microwave and Optical Technology Letters, Volume 59#01, DOI 30226, a few typing errors were introduced by journal. The corrections are shown below: The correct caption of Figure 2 is the fo…
View article: Mechanical characterization and modeling of the deformation and failure of the highly crosslinked RTM6 epoxy resin
Mechanical characterization and modeling of the deformation and failure of the highly crosslinked RTM6 epoxy resin Open
View article: Polypropylene Carbon Nanotubes Nanocomposites: Combined Influence of Block Copolymer Compatibilizer and Melt Annealing on Electrical Properties
Polypropylene Carbon Nanotubes Nanocomposites: Combined Influence of Block Copolymer Compatibilizer and Melt Annealing on Electrical Properties Open
We study the influence of melt annealing and the presence of a block copolymer compatibilizer on the electrical properties of polypropylene carbon nanotubes (CNT) nanocomposites from the DC limit to microwave frequencies and link it to the…
View article: Nonconformal mesh-based finite element strategy for 3D textile composites
Nonconformal mesh-based finite element strategy for 3D textile composites Open
A finite element procedure is developed for the computation of the thermoelastic properties of textile composites with complex and compact two- and three-dimensional woven reinforcement architectures. The purpose of the method is to provid…