Guangsheng Song
YOU?
Author Swipe
View article: Heterojunction design of ZnO/α-Fe2O3 with dual enhancement of ion/electron transport for energy storage
Heterojunction design of ZnO/α-Fe2O3 with dual enhancement of ion/electron transport for energy storage Open
Transition metal oxides (TMOs), such as Fe2O3 and ZnO, are attractive as anode materials for battery application due to the high theoretical specific capacity, environmental friendliness, and low price. However, poor electron conductivity …
View article: Coil-shaped multimode polymer optical fibers for robotic tactile perception
Coil-shaped multimode polymer optical fibers for robotic tactile perception Open
Optical fiber tactile sensors capable of measuring contact forces are emerging as potential components for intelligent robotics. The demand for innovative fiber sensor designs and effective fabrication techniques to enhance tactile sensing…
View article: Strengthening Mg–8Li–3Al–2Zn-1Gd-0.2Zr alloy by combining hot extrusion and cold rolling
Strengthening Mg–8Li–3Al–2Zn-1Gd-0.2Zr alloy by combining hot extrusion and cold rolling Open
The microstructure, texture, and mechanical properties of as-extruded and cold-rolled Mg–8Li–3Al–2Zn-1Gd-0.2Zr (LAZ832-1Gd-0.2Zr) alloys were investigated with the aim of strengthening the alloy by combining hot extrusion and cold rolling.…
View article: Multi-Doping Exploration of (Sb, Bi and Ba) by First Principles on Ordered Zn–Si–P Compounds as High-Performance Anodes for Next-Generation Li-Ion Batteries
Multi-Doping Exploration of (Sb, Bi and Ba) by First Principles on Ordered Zn–Si–P Compounds as High-Performance Anodes for Next-Generation Li-Ion Batteries Open
Chalcopyrite ZnSiP 2 has emerged as a promising anode material for next generation Li-ion-based batteries due to its high theoretical capacity. First principles multiple-dopant effect computations were made on the structural, electronic, m…
View article: Effect of extrusion ratio on microstructure, texture, and mechanical properties of dual-phase Mg−8Li−6Zn−2Gd alloy
Effect of extrusion ratio on microstructure, texture, and mechanical properties of dual-phase Mg−8Li−6Zn−2Gd alloy Open
The microstructure observation, macrotexture analysis, and tensile test were conducted to investigate the effect of extrusion ratio on the microstructure, texture, and mechanical properties of Mg−8Li−6Zn−2Gd alloy. The results show that th…
View article: Bioinspired Structural Composite Flexible Material with High Cushion Performance
Bioinspired Structural Composite Flexible Material with High Cushion Performance Open
Impacts occur everywhere, and they pose a serious threat to human health and production safety. Flexible materials with efficient cushioning and energy absorption are ideal candidates to provide protection from impacts. Despite the high de…
View article: Multi-Layer TiO2−x-PEDOT-Decorated Industrial Fe2O3 Composites as Anode Materials for Cycle-Performance-Enhanced Lithium-Ion Batteries
Multi-Layer TiO2−x-PEDOT-Decorated Industrial Fe2O3 Composites as Anode Materials for Cycle-Performance-Enhanced Lithium-Ion Batteries Open
An industrial submicron-sized Fe2O3 with no special shape was decorated by a multi-layer coating of oxygen-deficient TiO2−x and conducting polymer PEDOT (poly 3,4-ethylenedioxythiophene). A facile sol–gel method followed by an EDOT polymer…
View article: TiNbO <sub>4</sub> ‐coated industrial submicron Si anode for high‐performance Li‐ion batteries
TiNbO <sub>4</sub> ‐coated industrial submicron Si anode for high‐performance Li‐ion batteries Open
Silicon (Si) is a promising anode material for Li‐ion batteries but suffers from volume change during (de)lithiation, leading to electrode pulverization and capacity decay. To address this issue, we introduced a zero‐strain Li‐ion conducto…
View article: Effect of Li Content on the Microstructure and Mechanical Properties of as-Homogenized Mg-Li-Al-Zn-Zr Alloys
Effect of Li Content on the Microstructure and Mechanical Properties of as-Homogenized Mg-Li-Al-Zn-Zr Alloys Open
The microstructure and mechanical properties of as-homogenized Mg-xLi-3Al-2Zn-0.2Zr alloys (x = 5, 7, 8, 9, 11 wt.%) were studied. As the Li content increased from 5 wt.% to 11 wt.%, the alloy matrix changed from the α-Mg single-phase to α…
View article: Intrinsic Kinematics of the Tibiotalar and Subtalar Joints during Human Walking based on Dynamic Biplanar Fluoroscopy
Intrinsic Kinematics of the Tibiotalar and Subtalar Joints during Human Walking based on Dynamic Biplanar Fluoroscopy Open
Accurate knowledge of the kinematics of the in vivo Ankle Joint Complex (AJC) is critical for understanding the biomechanical function of the foot and assessing postoperative rehabilitation of ankle disorders, as well as an essential guide…
View article: Effect of partial Ni substitution in V<sub>85</sub>Ni<sub>15</sub> by Ti on microstructure, mechanical properties and hydrogen permeability of V-based BCC alloy membranes
Effect of partial Ni substitution in V<sub>85</sub>Ni<sub>15</sub> by Ti on microstructure, mechanical properties and hydrogen permeability of V-based BCC alloy membranes Open
Vanadium-based alloy membranes with body-centred-cubic (BCC) structure are considered as one of the leading alternatives to Pd-based alloys for hydrogen separation applications due to their lower cost and higher permeability. As permeabili…
View article: Microstructure transformation and twinning mechanism of 304 stainless steel tube during hydraulic bulging
Microstructure transformation and twinning mechanism of 304 stainless steel tube during hydraulic bulging Open
At room temperature, the hollow shaft of AISI 304 stainless steel tubes was produced by a hydraulic bulging process. The behavior of strain-induced austenite to martensite transformation and the twin crystallographic nature of AISI 304 sta…
View article: Effects of Different Levels of Boron on Microstructure and Hardness of CoCrFeNiAlxCu0.7Si0.1By High-Entropy Alloy Coatings by Laser Cladding
Effects of Different Levels of Boron on Microstructure and Hardness of CoCrFeNiAlxCu0.7Si0.1By High-Entropy Alloy Coatings by Laser Cladding Open
High-entropy alloys (HEAs) are novel solid solution strengthening metallic materials, some of which show attractive mechanical properties. This paper aims to reveal the effect of adding small atomic boron on the interstitial solid solution…
View article: Twinning and detwinning behaviors of Mg–3Al–1Zn sheets subjected to different loading paths
Twinning and detwinning behaviors of Mg–3Al–1Zn sheets subjected to different loading paths Open
Twinning and detwinning are the important deformation modes in magnesium alloys during different deformation processes. To analyze the interaction of two deformation mechanisms under different loading paths, firstly, compression–tension ex…