Guisheng Zou
YOU?
Author Swipe
View article: Mining-Induced Subsidence Boundary Delineation Using Dual-Feature Clustering of InSAR-Derived Deformation Gradient
Mining-Induced Subsidence Boundary Delineation Using Dual-Feature Clustering of InSAR-Derived Deformation Gradient Open
Mining-induced subsidence boundaries, i.e., the surface areas affected by underground mining, play an important role in surface damage assessment and illegal mining identification. Traditional boundary delineation methods rely on field sur…
View article: An Underground Goaf Locating Framework Based on D-InSAR with Three Different Prior Geological Information Conditions
An Underground Goaf Locating Framework Based on D-InSAR with Three Different Prior Geological Information Conditions Open
Illegal mining operations induce cascading ecosystem degradation by causing extensive ground subsidence, necessitating accurate underground goaf localization for effectively induced-hazard mitigation. The conventional locating method appli…
View article: Rapid in-situ formation of Cu-Sn full intermetallic compound films and their joint strengthening mechanisms
Rapid in-situ formation of Cu-Sn full intermetallic compound films and their joint strengthening mechanisms Open
View article: Extending low‐temperature sintering technique to large‐sized whole‐wafer power semi‐conductor devices
Extending low‐temperature sintering technique to large‐sized whole‐wafer power semi‐conductor devices Open
With the enormous growth in the capacity of electrical equipment, power semi‐conductor devices are developing rapidly towards larger size and higher capacity. To suppress the thermal resistance and achieve efficient heat dissipation, the a…
View article: Wetting-induced porosity gradient formation in Cu nanoparticles sintering bonding
Wetting-induced porosity gradient formation in Cu nanoparticles sintering bonding Open
View article: Bone‐Induced Nanocomposite Coating with a “Sandwich” Structure
Bone‐Induced Nanocomposite Coating with a “Sandwich” Structure Open
Infection‐induced bone defects present significant challenges in clinical bone regeneration, frequently leading to poor bone induction, recurring infections, and complications such as pain and chronic inflammation. This study introduces a …
View article: Review on Power Cycling Reliability of SiC Power Device
Review on Power Cycling Reliability of SiC Power Device Open
The rising demand for increased integration and higher power outputs poses a hidden risk to the long-term reliable operation of third-generation semiconductors. Thus, the power cycling test (PCT) is widely regarded as the utmost critical t…
View article: Preparation of Ag-Cu nanoparticle film using a dual-beam pulsed laser deposition for power electronic packaging
Preparation of Ag-Cu nanoparticle film using a dual-beam pulsed laser deposition for power electronic packaging Open
Ag-Cu nanoparticles, integrating the advantages of Ag and Cu, are promising materials for power electronic packaging. In this work, a novel dual-beam pulsed laser deposition method was proposed to prepare an Ag-Cu nanoparticle film with va…
View article: Mos2/Zno-Heterostructured Optoelectronic Synapse for Multiwavelength Optical Information-Based Sensing, Memory, and Processing
Mos2/Zno-Heterostructured Optoelectronic Synapse for Multiwavelength Optical Information-Based Sensing, Memory, and Processing Open
View article: Artificial Intelligence Meets Flexible Sensors: Emerging Smart Flexible Sensing Systems Driven by Machine Learning and Artificial Synapses
Artificial Intelligence Meets Flexible Sensors: Emerging Smart Flexible Sensing Systems Driven by Machine Learning and Artificial Synapses Open
The recent wave of the artificial intelligence (AI) revolution has aroused unprecedented interest in the intelligentialize of human society. As an essential component that bridges the physical world and digital signals, flexible sensors ar…
View article: Multifunctional Van Der Waals Heterostructures Enabled by Femtosecond Laser-Controlled Band Alignment Engineering
Multifunctional Van Der Waals Heterostructures Enabled by Femtosecond Laser-Controlled Band Alignment Engineering Open
View article: Preparation of Ag-Cu Nanoparticle Film Using a Dual-Beam Pulsed Laser Deposition for Power Electronic Packaging
Preparation of Ag-Cu Nanoparticle Film Using a Dual-Beam Pulsed Laser Deposition for Power Electronic Packaging Open
View article: In Situ Induced Asymmetric Schottky Contacts Via Localized Ultrafast Laser Irradiation for Ultrasensitive, Self-Powered, 2d Photodetectors
In Situ Induced Asymmetric Schottky Contacts Via Localized Ultrafast Laser Irradiation for Ultrasensitive, Self-Powered, 2d Photodetectors Open
View article: Facile Synthesis of Cu-Sn Nanoparticle Film and its Bonding Mechanism for Power Electronic Packaging
Facile Synthesis of Cu-Sn Nanoparticle Film and its Bonding Mechanism for Power Electronic Packaging Open
View article: Fabrication of Metallic Superhydrophobic Surfaces with Tunable Condensate Self-Removal Capability and Excellent Anti-Frosting Performance
Fabrication of Metallic Superhydrophobic Surfaces with Tunable Condensate Self-Removal Capability and Excellent Anti-Frosting Performance Open
Laser fabrication of metallic superhydrophobic surfaces (SHSs) for anti-frosting has recently attracted considerable attention. Effective anti-frosting SHSs require the efficient removal of condensed microdroplets through self-propelled dr…
View article: Rapid and Low Temperature Sintering Bonding Using Cu Nanoparticle Film for Power Electronic Packaging
Rapid and Low Temperature Sintering Bonding Using Cu Nanoparticle Film for Power Electronic Packaging Open
View article: Cover Picture: Bioinspired Color Switchable Photonic Crystal Silicone Elastomer Kirigami (Angew. Chem. Int. Ed. 26/2021)
Cover Picture: Bioinspired Color Switchable Photonic Crystal Silicone Elastomer Kirigami (Angew. Chem. Int. Ed. 26/2021) Open
Dynamic color is essential for practical applications such as dynamic displays, sensors, cryptography, and camouflage. In their Communication on page 14307, Mingzhu Li et al. demonstrate a flexible, mechanically triggered color switchable …
View article: Solar anti-icing surface with enhanced condensate self-removing at extreme environmental conditions
Solar anti-icing surface with enhanced condensate self-removing at extreme environmental conditions Open
Significance Among various anti-icing conditions, cold and humid environments are the most difficult to tackle. Although photothermal materials have been used to increase surface temperature for delaying freezing, severe condensation under…
View article: Interfacial Bonding Mechanism and Mechanical Performance of Continuous Fiber Reinforced Composites in Additive Manufacturing
Interfacial Bonding Mechanism and Mechanical Performance of Continuous Fiber Reinforced Composites in Additive Manufacturing Open
The additive manufacturing of continuous fiber composites has the advantage of a high-precision and efficient forming process, which can realize the lightweight and integrated manufacturing of complex structures. However, many void defects…
View article: Boride Evolutionary Behavior and Mechanism in the TLP Repaired IN738 Superalloy with Crack-Like Defects
Boride Evolutionary Behavior and Mechanism in the TLP Repaired IN738 Superalloy with Crack-Like Defects Open
View article: A wireless, implantable optoelectrochemical probe for optogenetic stimulation and dopamine detection
A wireless, implantable optoelectrochemical probe for optogenetic stimulation and dopamine detection Open
View article: Performance of Short Fiber Interlayered Reinforcement Thermoplastic Resin in Additive Manufacturing
Performance of Short Fiber Interlayered Reinforcement Thermoplastic Resin in Additive Manufacturing Open
To further improve the mechanical properties of thermoplastic resin in additive manufacturing (AM), this paper presents a novel method to directly and quantitatively place the short fibers (SFs) between two printing process of resin layers…
View article: A wireless, implantable optoelectrochemical probe for optogenetic stimulation and dopamine detection
A wireless, implantable optoelectrochemical probe for optogenetic stimulation and dopamine detection Open
Physical and chemical technologies have been continuously progressing advances of neuroscience research. The development of research tools for closed-loop control and monitoring neural activities in behaving animals is highly desirable. In…
View article: Maskless Patterning of Metal Outflow in Alternating Metal/Ceramic Multiple Nanolayers by Femtosecond Laser Irradiation
Maskless Patterning of Metal Outflow in Alternating Metal/Ceramic Multiple Nanolayers by Femtosecond Laser Irradiation Open
In this work, solid-state metal transport from internal metal nanolayers onto the surface of metal/ceramic nanomultilayers (NMLs) has been directed in a controlled way by femtosecond (fs) laser irradiation and subsequent low-temperature th…
View article: Structure Inheritance in Nanoparticle Ink Direct-Writing Processes and Crack-Free Nano-Copper Interconnects Printed by a Single-Run Approach
Structure Inheritance in Nanoparticle Ink Direct-Writing Processes and Crack-Free Nano-Copper Interconnects Printed by a Single-Run Approach Open
When nanoparticle conductive ink is used for printing interconnects, cracks and pores are common defects that deteriorate the electrical conductivity of the printed circuits. Influences of the ink solvent, the solid fraction of the ink, th…
View article: Low temperature Cu bonding with large tolerance of surface oxidation
Low temperature Cu bonding with large tolerance of surface oxidation Open
A novel method of low temperature all-Cu bonding was developed, which has a large tolerance for Cu surface oxidation and can even bond Cu with a thick oxide layer at 250 °C. It is significant for the chip level bonding because traditional …
View article: Thin‐Film Optical Filters: High Performance, Biocompatible Dielectric Thin‐Film Optical Filters Integrated with Flexible Substrates and Microscale Optoelectronic Devices (Advanced Optical Materials 15/2018)
Thin‐Film Optical Filters: High Performance, Biocompatible Dielectric Thin‐Film Optical Filters Integrated with Flexible Substrates and Microscale Optoelectronic Devices (Advanced Optical Materials 15/2018) Open
High performance, flexible thin-film dielectric optical filters are prepared by Xing Sheng and co-workers (article number 1800146). These flexible filters are fabricated by a release and printing process and maintain excellent optical qual…
View article: The mechanism of pore segregation in the sintered nano Ag for high temperature power electronics applications
The mechanism of pore segregation in the sintered nano Ag for high temperature power electronics applications Open
View article: Wearable Electronics: Self‐Powered Wearable Electronics Based on Moisture Enabled Electricity Generation (Adv. Mater. 18/2018)
Wearable Electronics: Self‐Powered Wearable Electronics Based on Moisture Enabled Electricity Generation (Adv. Mater. 18/2018) Open
In article number 1705925, Lei Liu, Y. Norman Zhou, and co-workers demonstrate a highly efficient moisture-driven electrical generator based on the diffusive flow of water in 3D nanowire networks. This new power device has excellent intrin…
View article: Microstructure and Tensile-Shear Properties of Resistance Spot-Welded Medium Mn Steel
Microstructure and Tensile-Shear Properties of Resistance Spot-Welded Medium Mn Steel Open
The medium Mn steels are gaining increasing attention due to their excellent combination of mechanical properties and material cost. A cold-rolled 0.1C5Mn medium Mn steel with a ferrite matrix plus metastable austenite duplex microstructur…