Hany S. Abdo
YOU?
Author Swipe
View article: Mechanical, thermal, and antimicrobial behavior of copper-enhanced polypropylene composites with improved UV stability
Mechanical, thermal, and antimicrobial behavior of copper-enhanced polypropylene composites with improved UV stability Open
This study investigates the incorporation of copper nanoparticles (Cu NPs) into polypropylene (PP) matrices to enhance mechanical, thermal, and antimicrobial properties, addressing the growing challenge of antimicrobial resistance (AMR). C…
View article: Retraction notice to “A study on the mechanical performance, shrinkage and morphology of high-performance fiber reinforced concrete with varying SCMs and geometry of steel fibers” Case Stud. Constr. Mater. 21 (2024) e03642
Retraction notice to “A study on the mechanical performance, shrinkage and morphology of high-performance fiber reinforced concrete with varying SCMs and geometry of steel fibers” Case Stud. Constr. Mater. 21 (2024) e03642 Open
View article: Comparative study of interpretable and black-box machine learning for modeling mechanical and tribological properties of 3D-printed PLA/date pits composites
Comparative study of interpretable and black-box machine learning for modeling mechanical and tribological properties of 3D-printed PLA/date pits composites Open
3D-printed polymers have been applied in various fields. Machine learning (ML) has revolutionized material science by providing powerful tools for modeling complex properties. This study investigates the comparative performance of interpre…
View article: Maximizing the functional properties of epoxy coatings using milled Al for enhanced mechanical strength and corrosion resistance
Maximizing the functional properties of epoxy coatings using milled Al for enhanced mechanical strength and corrosion resistance Open
Herein, epoxy coatings modified with milled aluminum (Al) were tested for their mechanical strength and corrosion resistance. First, milling was performed on the as-received Al powder for 70 h. The obtained powder postmilling was added to …
View article: Retraction Note: Study of basalt/hemp fibers reinforced B4C nanoparticles influenced hybrid epoxy composite: a novel approach for optical fiber insulation
Retraction Note: Study of basalt/hemp fibers reinforced B4C nanoparticles influenced hybrid epoxy composite: a novel approach for optical fiber insulation Open
View article: Effect of Oxide’s Thermophysical Properties on 2205 Duplex Stainless Steels ATIG Welds
Effect of Oxide’s Thermophysical Properties on 2205 Duplex Stainless Steels ATIG Welds Open
Duplex stainless-steel grade 2205 (2205 DSS) is the most widely used of the current duplex materials. The duplex steel alloy is characterized by high strength and high corrosion resistance through enhancing nitrogen and molybdenum contents…
View article: Exploring synergistic solid lubrication for enhanced tribological performance in biochar-reinforced aluminum matrix composites fabricated by induction sintering
Exploring synergistic solid lubrication for enhanced tribological performance in biochar-reinforced aluminum matrix composites fabricated by induction sintering Open
This study presents a pioneering methodology for the synthesis of aluminum matrix composites (AMCs) fortified with biochar, sourced from renewable biomass feedstocks. Employing a systematic approach, various biochar weight percentages were…
View article: Fabrication of Hybrid Epoxy Composites (Joint Compound Adhesive) for Aluminum Substrate Applications and Their Evaluation for Mechanical Properties
Fabrication of Hybrid Epoxy Composites (Joint Compound Adhesive) for Aluminum Substrate Applications and Their Evaluation for Mechanical Properties Open
This research endeavor deals with the development of an epoxy hybrid nanocomposite using aliphatic diglycidyl ether of a bisphenol A (DGEBA) epoxy matrix. The formulation used the stoichiometric ratio of the curing agent and incorporated n…
View article: Experimental investigation on the tribo-mechanical behavior of PMMA reinforced by solid lubricant filler for dental implant applications
Experimental investigation on the tribo-mechanical behavior of PMMA reinforced by solid lubricant filler for dental implant applications Open
This study investigates the enhancement of mechanical and tribological behavior in polymethyl methacrylate (PMMA) composites reinforced with graphene oxide (GO) as a solid lubricant filler for advanced biomedical applications, particularly…
View article: Fabrication of PMMA nanocomposite biomaterials reinforced by cellulose nanocrystals extracted from rice husk for dental applications
Fabrication of PMMA nanocomposite biomaterials reinforced by cellulose nanocrystals extracted from rice husk for dental applications Open
The primary objective of global studies is to develop the properties and durability of polymers for various applications. When it comes to dental disability, denture base materials must have sufficient mechanical and tribological performan…
View article: Investigations on corrosion rate, mechanical properties and structural homogeneity of interpulse TIG dissimilar weldments
Investigations on corrosion rate, mechanical properties and structural homogeneity of interpulse TIG dissimilar weldments Open
This manuscript aims to investigate the welding characteristics, bead profile, structural integrity and corrosion behavior of low-carbon steel and Monel grade 400 dissimilar joints. The structures were developed using advanced welding tech…
View article: RETRACTED: A study on the mechanical performance, shrinkage and morphology of high-performance fiber reinforced concrete with varying SCMs and geometry of steel fibers
RETRACTED: A study on the mechanical performance, shrinkage and morphology of high-performance fiber reinforced concrete with varying SCMs and geometry of steel fibers Open
This paper investigates the effects of silica fume (SF) and metakaolin (MK) as cement substitutes on the mechanical properties, shrinkage, and toughness performances of steel fiber reinforced concrete (SFRC). Initially, a reference concret…
View article: Mechanical characterization and microstructural evolution of Inconel 718 and SS316L TIG weldments at high temperatures
Mechanical characterization and microstructural evolution of Inconel 718 and SS316L TIG weldments at high temperatures Open
This study examines the impact of both constant and pulsed current on the tensile characteristics, micro-hardness of weld surface, and metallurgical properties of the Inconel 718 and SS316L weldments. The Tungsten Inert Gas (TIG) welding p…
View article: Potential of recycled polypropylene: A study on effect of natural fiber on the morphology and properties of biocomposite
Potential of recycled polypropylene: A study on effect of natural fiber on the morphology and properties of biocomposite Open
This research explores the innovative fabrication and characterization of recycled polypropylene composites that reinforced by natural fibers, specifically date palm micro fibers (DPF). Employed a twin-screw extruder for the mixing, and in…
View article: Enhancing Face Mask Protection: Graphene Oxide Modification for Improved Filtration and Electrostatic Charge
Enhancing Face Mask Protection: Graphene Oxide Modification for Improved Filtration and Electrostatic Charge Open
The global impact of the COVID-19 pandemic has prompted widespread use of face masks as a defense against respiratory transmission. While these masks provide some level of protection, there are limitations in terms of efficient bacteria fi…
View article: Developing Artificial Intelligence Models for Predicting the Tribo-Mechanical Properties of HDPE Nanocomposite Used in Artificial Hip Joints
Developing Artificial Intelligence Models for Predicting the Tribo-Mechanical Properties of HDPE Nanocomposite Used in Artificial Hip Joints Open
Hip joint fractures are a serious and prevalent health concern, especially among the elderly. The forces that the lower limbs must withstand are quite strong and can exceed many times the person body weight, especially in the femur. The se…
View article: Synthesis and Characterization of Micro Biocomposite Based on Oyster Shell Particles Reinforced Recycled Polypropylene
Synthesis and Characterization of Micro Biocomposite Based on Oyster Shell Particles Reinforced Recycled Polypropylene Open
View article: A study on value addition of cow dung-based anaerobic sludge for biomethane and bio-oil production <i>via</i> co-liquefaction with rice straw and clam shells as a catalyst
A study on value addition of cow dung-based anaerobic sludge for biomethane and bio-oil production <i>via</i> co-liquefaction with rice straw and clam shells as a catalyst Open
Hydrothermal liquefaction of rice straw and cow dung after anaerobic digestion towards sustainable waste utilization for bio-oil production.
View article: Investigation of Prosthetic Feet Friction for Enhanced Stability in Persons With Disabilities: ANFIS Analysis of Rubber-Floor Interaction
Investigation of Prosthetic Feet Friction for Enhanced Stability in Persons With Disabilities: ANFIS Analysis of Rubber-Floor Interaction Open
Prosthetic feet are essential aids for individuals with disabilities, enabling them to stand and walk. However, current prosthetic foot designs often fall short in terms of material properties, potentially compromising safety on various su…
View article: Robust Particle Swarm Optimization Algorithm for Modeling the Effect of Oxide's Thermal Properties on 304l Stainless Steels Amig Welds
Robust Particle Swarm Optimization Algorithm for Modeling the Effect of Oxide's Thermal Properties on 304l Stainless Steels Amig Welds Open
View article: Ecofriendly Biochar as a Low-Cost Solid Lubricating Filler for LDPE Sustainable Biocomposites: Thermal, Mechanical, and Tribological Characterization
Ecofriendly Biochar as a Low-Cost Solid Lubricating Filler for LDPE Sustainable Biocomposites: Thermal, Mechanical, and Tribological Characterization Open
The potential of ecofriendly biochar, a carbon-rich byproduct of biomass pyrolysis, as a low-cost solid lubricating filler for low-density polyethylene (LDPE) sustainable biocomposites is investigated in this work. Tensile strength, hardne…
View article: Characterization of Bi substitution of strontium cobalt zinc ferrites synthesized by micro-emulsion technique
Characterization of Bi substitution of strontium cobalt zinc ferrites synthesized by micro-emulsion technique Open
Strontium cobalt zinc bismuth ferrites with formula are provided in this study using formula Sr0.5Co0.4Zn0.4BixFe2-xO4 at different variation of x= 0.0, 0.05, 0.10, 0.15 synthesized by Micro-emulsion techniques. To check the physical chara…
View article: Activated Carbon-Incorporated Tragacanth Gum Hydrogel Biocomposite: A Promising Adsorbent for Crystal Violet Dye Removal from Aqueous Solutions
Activated Carbon-Incorporated Tragacanth Gum Hydrogel Biocomposite: A Promising Adsorbent for Crystal Violet Dye Removal from Aqueous Solutions Open
Biomaterials-based adsorbents have emerged as a sustainable and promising solution for water purification, owing to their eco-friendly nature and remarkable adsorption capacities. In this study, a biocomposite hydrogel was prepared by the …
View article: Casting light on the tribological properties of paraffin-based HDPE enriched with graphene nano-additives: an experimental investigation
Casting light on the tribological properties of paraffin-based HDPE enriched with graphene nano-additives: an experimental investigation Open
The impressive mechanical properties and robust resistance to wear recorded by nano-polymeric composites have positioned them as a viable alternative in many applications. When it comes to frictional materials, high-density polyethylene (H…
View article: Enhanced Adsorption of Textile Dyes by a Novel Sulfonated Activated Carbon Derived from Pomegranate Peel Waste: Isotherm, Kinetic and Thermodynamic Study
Enhanced Adsorption of Textile Dyes by a Novel Sulfonated Activated Carbon Derived from Pomegranate Peel Waste: Isotherm, Kinetic and Thermodynamic Study Open
The rapid growth of the dye and textile industry has raised significant public concerns regarding the pollution caused by dye wastewater, which poses potential risks to human health. In this study, we successfully improved the adsorption e…
View article: Hydroxyapatite–Clay Composite for Bone Tissue Engineering: Effective Utilization of Prawn Exoskeleton Biowaste
Hydroxyapatite–Clay Composite for Bone Tissue Engineering: Effective Utilization of Prawn Exoskeleton Biowaste Open
Hydroxyapatite (HA, Ca10(PO4)6(OH)2)-based porous scaffolds have been widely investigated in the last three decades. HA, with excellent biocompatibility and osteoconductivity, has made this material widely used in bone tissue engineering. …
View article: Design and Fabrication of Nanofiber-Coated Antenna with Electrospun Polyacrylonitrile (PAN) for Tissue Cancer Ablation
Design and Fabrication of Nanofiber-Coated Antenna with Electrospun Polyacrylonitrile (PAN) for Tissue Cancer Ablation Open
Hepatocellular carcinoma (HC) is a common liver cancer often associated with chronic liver diseases such as hepatitis B and C-induced cirrhosis. Multiple treatments are available, including microwave ablation (MWA), which has proven effect…
View article: Investigation of the Mechanical and Tribological Behavior of Epoxy-Based Hybrid Composite
Investigation of the Mechanical and Tribological Behavior of Epoxy-Based Hybrid Composite Open
The main target of this study is to evaluate the impact of hybrid reinforcement using Al2O3 nanoparticles and graphite on the epoxy nanocomposites’ mechanical and tribological properties. Various weight fractions of the reinforcement mater…
View article: Study on Process Parameters in Hydrothermal Liquefaction of Rice Straw and Cow Dung: Product Distribution and Application of Biochar in Wastewater Treatment
Study on Process Parameters in Hydrothermal Liquefaction of Rice Straw and Cow Dung: Product Distribution and Application of Biochar in Wastewater Treatment Open
In this study, rice straw (RS) and cow dung (CD) waste were hydrothermally processed for the recovery of bio-oil and biochar. The hydrothermal experiments were performed in a 5 L capacity reactor under the following process conditions: tem…
View article: Enhancing the Tribo-Mechanical Performance of LDPE Nanocomposites Utilizing Low Loading Fraction Al2O3/SiC Hybrid Nanostructured Oxide Fillers
Enhancing the Tribo-Mechanical Performance of LDPE Nanocomposites Utilizing Low Loading Fraction Al2O3/SiC Hybrid Nanostructured Oxide Fillers Open
This research work highlights the tribomechanical investigations of using a low loading fraction of two ceramics combinations, Alumina (Al2O3) and Silicon Carbide (SiC) as reinforcement for Low-density Polyethylene (LDPE) matrix. The hybri…