Explanipedia

3D Printed Connection System for Bamboo Structure Construction Open

John Denver Catapang, Abigail Cruz Catapang, Rigoberto C. Advíncula, John Ryan C. Dizon, Susana Hernández López , et al. · 2025

The construction industry is increasingly adopting sustainable solutions, with bamboo emerging as a resilient and eco-friendly material. However, challenges persist in bamboo construction, particularly in developing effective techniques fo…

Evaluation of Tensile Behavior of 3D-Printed Fiberglass-Reinforced Nylon Composites Open

Madelene Velasco Villablanca, Arman Ray Nisay, Brian Jumaquio Tuazon, D. Domínguez, John Ryan C. Dizon · 2025

In this study, the elastic modulus of the 3D-printed Nylon filament reinforced with chopped carbon fiber as the matrix material and fiberglass (FG) as the reinforcement material, was evaluated using the Rule of Mixtures. Different configur…

Additive Manufacturing Technology in the Furniture Industry: Future Outlook for Developing Countries Open

Brian Jumaquio Tuazon, John Ryan C. Dizon · 2024

For the past few years, the adoption of 3D printing technology has benefited various manufacturing industries, including the furniture making industry. However, this adoption has been greatly seen in industrialized countries and lacking in…

Environmentally Friendly Water-Based Reduced Graphene Oxide/Cellulose Nanofiber Ink for Supercapacitor Electrode Applications Open

Kiran I. Nargatti, Sandeep S. Ahankari, John Ryan C. Dizon, S. Ramesh · 2024

The agglomeration of reduced graphene oxide (rGO) in water makes the development of rGO inks for supercapacitor printing challenging. Cellulose nanofiber (CNF), a biodegradable and renewable nanomaterial, can act as a nanospacer, preventin…

Design Optimization of DR3AM Vapor Polishing Device for ABS 3D-Printed Parts Open

Rosa Mae D. Baluyut, Jan Rapaela B. Bartolome, H. Romel B. De Guzman, Josefa L. Morales, Anthony N. Moscosa , et al. · 2023

3D printing is an additive manufacturing method that turns digital design into an actual product. A 3D-printed part sometimes requires post-processing to enhance its physical and mechanical properties. Acetone vapor polishing is one of tho…

Statistical methods for design and testing of 3D-printed polymers Open

Michaela T. Espino, Brian Jumaquio Tuazon, Alejandro H. Espera, Carla Joyce C. Nocheseda, Roland S. Manalang , et al. · 2023

Quality prediction and classification of resistance spot weld using artificial neural network with open-sourced, self-executable and GUI-based application tool Q-Check Open

Suhaila Abd Halim, Yupiter HP Manurung, Muhamad Aiman Raziq, Cheng Yee Low, Muhammad Saufy Rohmad , et al. · 2023

Fabrication and Testing of a Vapor Polishing Device for ABS 3D-Printed Parts Open

Ciara Catherine L. Gache, Sherwin Mesa, Thea Clarice Prado, Christian Canonoy, Jimwell Pengson , et al. · 2023

Post-processing plays a significant role in improving the surface and mechanical properties of 3D-printed parts. One of these post-processing methods is vapor polishing which utilizes acetone to polish 3D-printed Acrylonitrile Butadiene St…

On the 3D printability of silicone-based adhesives via viscous paste extrusion Open

Alejandro H. Espera, John Ryan C. Dizon, Arnaldo D. Valino, Qiyi Chen, Ítalo G. M. da Silva , et al. · 2023

Significance of Fundamental Metrology of 3D-Printed Parts for Engineering Design: Dimensional Accuracy Open

Gerald Sanqui Robles, Michaela T. Espino, Ray Noel M. Delda, John Ryan C. Dizon · 2022

This paper discusses some basic metrology considerations when 3D printing. The importance of ensuring correct measurements is highlighted especially for practical applications. The last part of the paper presents sample dimensional measure…

Development of an Ergonomically – Designed Violin Chinrest Using Additive Manufacturing Open

John Kenneth J. Barinque, Alshaheen T. Borja, Jeferson C. Cubangbang, Ulysses Ron C. Cruz, Marien P. Teopengco , et al. · 2022

A violin chinrest is used to ease the pain and prevent injuries of violinists. However, some of them experienced discomfort using normal chinrest. It causes injuries, irritations, and pains that affect the performance of violinists. In tha…

3D-Printed Ergonomic Tool Handles Open

Rheianne Mae C. Herrera, Ma. Andrea T. Blanco, John Carlo C. Carabeo, Faye Dannah B. Ramilo, John Renmar D. De Silva , et al. · 2022

Although hand tools serve as an instrument for extending one’s capabilities through the use of hands, the comfort it brings is important especially since the welfare of the user is at stake. Aside from using the hand tools repetitively and…

Advancing flexible electronics and additive manufacturing Open

Alejandro H. Espera, John Ryan C. Dizon, Arnaldo D. Valino, Rigoberto C. Advíncula · 2022

There is high interest in the synergism of thin-film and flexible electronics with additive manufacturing. This review primarily focuses on the prospective developments in convergence with flexible electronics manufacturing technologies. S…

3D-Printing for Cube Satellites (CubeSats): Philippines‘ Perspectives Open

Michael de Leon, Ulysses B. Ante, Madelene Velasco Villablanca, Arvin Oliver S. Ng, Joseph Alfred V. Garcia , et al. · 2022

The increase in space exploration missions in recent years gave way to the development of a volume-efficient and cost-effective nanosatellite like the cube satellite (CubeSat) which can be developed and fabricated in a relatively short tim…

Additively manufactured high-performance polymeric materials and their potential use in the oil and gas industry Open

Eugene B. Caldona, John Ryan C. Dizon, Robert Andrew Viers, Vincent Joseph García, Zane J. Smith , et al. · 2021

Establishment of An Academic Makerspace at the Bataan Peninsula State University: Prospects and Challenges Open

Emmanuel C. Macaraeg, Cristina Gutierrez Rivera, Ronnell D. Dela Rosa, John Ryan C. Dizon · 2021

Makerspaces are now fixtures in smart cities and universities in advanced countries. Many universities, especially in the United States, have Academic Makerspaces serving students and faculty, helping them with their projects. In Bataan Pe…

3D Printing Applications in Agriculture, Food Processing, and Environmental Protection and Monitoring Open

Jan Lloyd Buenaventura Crisostomo, John Ryan C. Dizon · 2021

This paper presents a mini review of the applications of 3D printing, formally known as additive manufacturing, in the fields of agriculture, food processing, and the environment protection and monitoring. The paper discusses materials use…

3D Printing Polymeric Materials for Robots with Embedded Systems Open

Ray Noel M. Delda, Rex B. Basuel, Rodel Peralta Hacla, Dan William C. Martinez, John‐John Cabibihan , et al. · 2021

The fabrication of robots and their embedded systems is challenging due to the complexity of the interacting components. The integration of additive manufacturing (AM) to robotics has made advancements in robotics manufacturing through sop…

Post-Processing of 3D-Printed Polymers Open

John Ryan C. Dizon, Ciara Catherine L. Gache, Honelly Mae S. Cascolan, Lina T. Cancino, Rigoberto C. Advíncula · 2021

Additive manufacturing, commonly known as 3D printing, is an advancement over traditional formative manufacturing methods. It can increase efficiency in manufacturing operations highlighting advantages such as rapid prototyping, reduction …

On the progress of 3D-printed hydrogels for tissue engineering Open

Rigoberto C. Advíncula, John Ryan C. Dizon, Eugene B. Caldona, Robert Andrew Viers, Francis Dave C. Siacor , et al. · 2021

3D-Printed Absorbers for Solar-Driven Interfacial Water Evaporation: A Mini-Review Open

Leonard D. Tijing, John Ryan C. Dizon, Gil Cruz · 2021

Solar-driven interfacial water evaporation (SWE) is considered as a promising sustainable solution for clean water production especially for remote and off-grid communities. Various approaches have been developed in the last decade to impr…

Development of Smartphone-Controlled Hand and Arm Exoskeleton for Persons with Disability Open

J-R. R. Diego, Dan William C. Martinez, Gerald Sanqui Robles, John Ryan C. Dizon · 2020

This study addresses the need for assistive technology of people who lost control of their upper limbs as well as people who are undergoing rehabilitation. Loss of upper limb control causes lack of functionality and social acceptability es…

Additive manufacturing for COVID-19: Devices, materials, prospects, and challenges Open

Rigoberto C. Advíncula, John Ryan C. Dizon, Qiyi Chen, Ivy Niu, Jason Chung , et al. · 2020

The current COVID-19 pandemic has caused the shortage of personal protective equipment (PPE) where improvised manufacturing in particular 3D printing has addressed many needs. This prospective discusses the current global crisis, then foll…

Influence of Fiberboard Container Design on Compression Bulge Displacement Open

Koushik Saha, Shane Messner, John Ryan C. Dizon, Nirav Chhajed, Jay Singh · 2020

Bulge effect is the out-of-plane displacement of a panel of a corrugated fiberboard box from its original position. This bulge effect often is the result of excessive weight being placed on a box that rests at the bottom of a palletized lo…

John Ryan C. Dizon YOU? Author Swipe