K. Chidambaram
YOU?
Author Swipe
View article: Hybrid Vehicle Battery Health State Estimation Based on Intelligent Regenerative Braking Control
Hybrid Vehicle Battery Health State Estimation Based on Intelligent Regenerative Braking Control Open
In response to the evolving transportation landscape, the safety and durability of hybrid electric vehicles (HEVs) necessitate the development of high-performance, reliable health management systems for batteries. The state of health (SOH)…
View article: Adoptability assessment of HCDI and RCCI modes in plug-in parallel hybrid electric vehicles using sustainable fuels and model-based torque structure calibration strategies
Adoptability assessment of HCDI and RCCI modes in plug-in parallel hybrid electric vehicles using sustainable fuels and model-based torque structure calibration strategies Open
In this research, a comparative analysis of plug-in hybrid electric vehicle (PHEV) engine was conducted with two advanced low temperature combustion (LTC) techniques viz. Homogeneous charge with direct injection (HCDI) and reactivity-contr…
View article: Analysis and experimental investigation of powder concentration and stirring velocity on powder mixed electrical discharge machining performance with 3D printed electrodes
Analysis and experimental investigation of powder concentration and stirring velocity on powder mixed electrical discharge machining performance with 3D printed electrodes Open
In this work, CuO mixed lemon peel dielectric is used along with the 3D printed aluminium electrodes to enhance the electrical discharge machining (EDM) performance. This work mainly focuses on improving the surface quality by optimizing t…
View article: Multi-Strategical Thermal Management Approach for Lithium-Ion Batteries: Combining Forced Convection, Mist Cooling, Air Flow Improvisers and Additives
Multi-Strategical Thermal Management Approach for Lithium-Ion Batteries: Combining Forced Convection, Mist Cooling, Air Flow Improvisers and Additives Open
Maintaining the peak temperature of a battery within limits is a mandate for the safer operation of electric vehicles. In two-wheeler electric vehicles, the options available for the battery thermal management system are minuscule due to t…
View article: Intelligent Regenerative Braking Control With Novel Friction Coefficient Estimation Strategy for Improving the Performance Characteristics of Hybrid Electric Vehicle
Intelligent Regenerative Braking Control With Novel Friction Coefficient Estimation Strategy for Improving the Performance Characteristics of Hybrid Electric Vehicle Open
Regenerative braking is of paramount importance both in terms of energy recovery and from the perspective of hybrid electric vehicles (HEVs). It allows HEVs to recover energy during braking which in turn enhances the range, efficiency and …
View article: Sustainable development and conservation of agro‐waste coconut shell powder strengthen lightweight aluminum bio‐composite for user friendly
Sustainable development and conservation of agro‐waste coconut shell powder strengthen lightweight aluminum bio‐composite for user friendly Open
The sustainable growth of advanced material in metal matrix composites receiving the eco‐friendly hazard‐free composite via recycling waste agro products attains low fabrication cost. The prime goal of this investigation is to develop and …
View article: Synthesis and characterization of quercetin-layer double hydroxide (LDH) nanohybrid and their enhanced antioxidant activity
Synthesis and characterization of quercetin-layer double hydroxide (LDH) nanohybrid and their enhanced antioxidant activity Open
This research included the synthesis of pristine nitrate-type Zn2Al-LDH by means of Co-precipitation, which was then followed by hydrothermal treatment. Ion exchange is used to stabilize the produced pristine LDH nano layer, which is used …
View article: Model based integrated control strategy for effective brake energy recovery to extend battery longevity in electric two wheelers
Model based integrated control strategy for effective brake energy recovery to extend battery longevity in electric two wheelers Open
This study aims to achieve optimal regenerative braking performance in the form of a reduced decline in battery SOC for a BLDC electric machine with peak torque of 10 Nm for use in electric two-wheelers. This is conducted via a comparison …
View article: Conservation of waste melon shell and fly ash utilized as reinforcements for aluminum alloy matrix in terrestrial ecosystem acquired green hybrid composites
Conservation of waste melon shell and fly ash utilized as reinforcements for aluminum alloy matrix in terrestrial ecosystem acquired green hybrid composites Open
Nowadays, the environmental ecosystem is protected and maintains sustainability for waste material management like agriculture product end waste and industrial waste. The main scope of this research is to gather the agriculture end product…
View article: Thermal Adsorption and Mechanical Behaviour of Polypropylene Hybrid Composite Synthesized by Glass/Hemp Fibre via an Injection Moulding Process
Thermal Adsorption and Mechanical Behaviour of Polypropylene Hybrid Composite Synthesized by Glass/Hemp Fibre via an Injection Moulding Process Open
Thermoplastic-based polymers are gathering importance in several engineering fields like electrical, electronic, automotive, aerospace, and structural. The additions of secondary phase reinforcements such as natural and synthetic fibre imp…
View article: Synthesis and Thermal Adsorption Characteristics of Silver-Based Hybrid Nanocomposites for Automotive Friction Material Application
Synthesis and Thermal Adsorption Characteristics of Silver-Based Hybrid Nanocomposites for Automotive Friction Material Application Open
Advances in friction materials are imposed on developing multiceramic reinforced hybrid nanocomposites with superior tribomechanical properties. The silver-based matrix metals are gained significance in various applications like bearing, r…
View article: Evaluation of Thermal Adsorption and Mechanical Behaviour of Intralaminar Jute/Sisal/E-Glass Fibre-Bonded Epoxy Hybrid Composite as an Insulator
Evaluation of Thermal Adsorption and Mechanical Behaviour of Intralaminar Jute/Sisal/E-Glass Fibre-Bonded Epoxy Hybrid Composite as an Insulator Open
A thermal gravimetric analyzer analyzed the thermal adsorption properties of developed composites with the temperature range of 28°C–650°C at a 20°C/min constant heat flow rate. The epoxy hybrid composites were synthesized using natural ju…
View article: Mechanical and Thermal Adsorption Actions on Epoxy Hybrid Composite Layered with Various Sequences of Alkali-Treated Jute and Carbon Fibre
Mechanical and Thermal Adsorption Actions on Epoxy Hybrid Composite Layered with Various Sequences of Alkali-Treated Jute and Carbon Fibre Open
Structural applications are accomplished by using a lightweight epoxy matrix bonded with natural jute fibre/synthetic carbon fibre to enhance the physical, mechanical, and thermal properties obtained by different sequences of alkali-treate…
View article: Design, analysis and validation of a centralized shifting mechanism with an electrical actuator
Design, analysis and validation of a centralized shifting mechanism with an electrical actuator Open
A sports utility vehicle (SUV) can be driven on different kinds of rugged surfaces and terrains. The shifting between different drive modes can improve fuel economy and handling based on driving conditions. This study aims to put forth a m…
View article: Towards Safer and Smarter Design for Lithium-Ion-Battery-Powered Electric Vehicles: A Comprehensive Review on Control Strategy Architecture of Battery Management System
Towards Safer and Smarter Design for Lithium-Ion-Battery-Powered Electric Vehicles: A Comprehensive Review on Control Strategy Architecture of Battery Management System Open
As the battery provides the entire propulsion power in electric vehicles (EVs), the utmost importance should be ascribed to the battery management system (BMS) which controls all the activities associated with the battery. This review arti…
View article: Influence of Acoustic Emission Signals and Damage Analysis During the Tensile Test on Al8011 Hybrid Composites by Stir Casting Method
Influence of Acoustic Emission Signals and Damage Analysis During the Tensile Test on Al8011 Hybrid Composites by Stir Casting Method Open
Metal network compounds have primary properties. The use of lightweight and low vitality is a testament to the growing interest in the automotive industry. Aluminum alloys, due to their advanced physical, mechanical and tribological proper…
View article: Cryogenic Treatment for Enhancing the Wear Resistance of Tool in Screw Briquetting Process
Cryogenic Treatment for Enhancing the Wear Resistance of Tool in Screw Briquetting Process Open
Cryogenic treatment which is done by super cooling materials around (-196 o C) with the aid of liquid nitrogen is one of the major heat treatment process used to improve wear resistance of materials.Partial cryogenic treatment is done from…
View article: Synthesis and Characterization of Mechanical Properties of AA8014 + Si3N4/ ZrO2 Hybrid Composites by Stir Casting Process
Synthesis and Characterization of Mechanical Properties of AA8014 + Si3N4/ ZrO2 Hybrid Composites by Stir Casting Process Open
Lightweight materials are extremely needed for the manufacturing of industrial parts and are used in aerospace, automobile body shops, biomedical instruments, etc. Aluminium alloy is one of the light-weight materials, and it fulfills the i…
View article: Synthesis and Adsorbent Performance of Modified Biochar with Ag/MgO Nanocomposites for Heat Storage Application
Synthesis and Adsorbent Performance of Modified Biochar with Ag/MgO Nanocomposites for Heat Storage Application Open
Heat storage is a major problem in the world. Many research is going on the heat storage application. This research investigates the novel Ag/MgO/biochar nanocomposites for heat storage. Ag/MgO/biochar nanocomposites were fabricated using …
View article: Synthesis and Experimental Investigations of Tribological and Corrosion Performance of AZ61 Magnesium Alloy Hybrid Composites
Synthesis and Experimental Investigations of Tribological and Corrosion Performance of AZ61 Magnesium Alloy Hybrid Composites Open
Magnesium alloy is the light weight material compared to aluminium alloy, and it possesses high strength; these alloys are used to manufacturing of vehicle parts. Magnesium alloy has extreme mechanical and thermal properties, and it is app…
View article: Wear Based Lifetime Estimation of a Clutch Facing using Coupled Field Analysis
Wear Based Lifetime Estimation of a Clutch Facing using Coupled Field Analysis Open
Repetitive use of the clutch, over a period of time, causes the friction material at the contact surfaces (clutch facing and flywheel/pressure plate) to wear, thus deteriorating its performance and usable life. The working life of a rigid …
View article: Numerical Modelling and Analytical Comparison of Delamination during Cryogenic Drilling of CFRP
Numerical Modelling and Analytical Comparison of Delamination during Cryogenic Drilling of CFRP Open
Carbon-Fibre-Reinforced Polymers (CFRPs) have seen a steady rise in modern industrial applications due to their high strength-to-weight ratio and corrosion resistance. However, their potential is being hindered by delamination which is ind…
View article: 4D Printing of Smart Polymer Nanocomposites: Integrating Graphene and Acrylate Based Shape Memory Polymers
4D Printing of Smart Polymer Nanocomposites: Integrating Graphene and Acrylate Based Shape Memory Polymers Open
The ever-increasing demand for materials to have superior properties and satisfy functions in the field of soft robotics and beyond has resulted in the advent of the new field of four-dimensional (4D) printing. The ability of these materia…
View article: Metallographic Characterization of SiC-Ni-Ti Layer Reinforced on Austenitic Stainless Steel (AISI 316L) by Two-step Laser Fabrication
Metallographic Characterization of SiC-Ni-Ti Layer Reinforced on Austenitic Stainless Steel (AISI 316L) by Two-step Laser Fabrication Open
Industry X.0 is the new paradigm that is the driving phenomenon in the process of making things and the new method in which they are produced. In this work, we attempt to fabricate ceramic layer reinforced metal matrix composite (MMC) of A…
View article: Effect of Cryogenic Grinding on Fatigue Life of Additively Manufactured Maraging Steel
Effect of Cryogenic Grinding on Fatigue Life of Additively Manufactured Maraging Steel Open
Additive manufacturing (AM) is replacing conventional manufacturing techniques due to its ability to manufacture complex structures with near-net shape and reduced material wastage. However, the poor surface integrity of the AM parts deter…
View article: Evaluation of Fluoride-Induced Neuro Degenerative Defences in Cyclea Peltata Lam Roots
Evaluation of Fluoride-Induced Neuro Degenerative Defences in Cyclea Peltata Lam Roots Open
Many diseases have become easier to diagnose and treat as a result of advancements in medical science and technology, but strokes, which have multiple etiologies and mechanisms, continue to be difficult to treat. Synthetic drugs are notori…
View article: Wear experimentation and parametric optimization on synthesized copper titanium composite
Wear experimentation and parametric optimization on synthesized copper titanium composite Open
The applications of non ferrous alloys have been significantly increased due to its desirable substance properties. The material strength and hardness were depend on the nature of reinforcements were added to it. In this chapter was utiliz…
View article: Vibration Analysis of Cutting Tool insert in Turning of 42CrMo4 alloy steel
Vibration Analysis of Cutting Tool insert in Turning of 42CrMo4 alloy steel Open
This investigation, vibration analysis of cutting tool in turning of 42CrMo4 alloy steel using CNMG120408SMRH13A insert. Tool vibration is the important phenomenon which affects the life of the cutting tool, machining quality and behaviour…
View article: Optimization of Wear Parameters of aluminium composites (AA6082/12wt%ZrO<sub>2</sub>) utilizing Taguchi technique
Optimization of Wear Parameters of aluminium composites (AA6082/12wt%ZrO<sub>2</sub>) utilizing Taguchi technique Open
Optimization of the wear properties of AA6082/12%ZrO2 AMCs prepared through compo casting process using Taguchi’s S/N analysis was evaluated. Taguchi’s process was utilized and L9 orthogonal array was elected for behaving the wear tests. O…