Konrad Trzciński
YOU?
Author Swipe
View article: A Key to Material's Stability: Tuning Pyrolysis Temperature in SnS <i> <sub>x</sub> </i> @C Anodes for Sodium‐Ion Batteries
A Key to Material's Stability: Tuning Pyrolysis Temperature in SnS <i> <sub>x</sub> </i> @C Anodes for Sodium‐Ion Batteries Open
Developing robust and efficient anodes is essential for advancing sodium‐ion battery technology. Herein, a systematic investigation of SnS x @C composites prepared at different pyrolysis temperatures to elucidate how their structural, surf…
View article: ZnIn2S4 thin films grown by pulsed laser deposition: Effect of electrolyte and illumination conditions on photoanode performance
ZnIn2S4 thin films grown by pulsed laser deposition: Effect of electrolyte and illumination conditions on photoanode performance Open
View article: Experimental and computational analysis of SnSx encapsulated into carbonized chitosan as electrode material for potassium ion batteries
Experimental and computational analysis of SnSx encapsulated into carbonized chitosan as electrode material for potassium ion batteries Open
Tin sulphide compounds (SnS x , x = 1, 2) are potential anode materials for potassium-ion batteries (PIBs) due to their characteristic layered structure, high theoretical capacity, non-toxicity and low production cost. However, they suffer…
View article: Synthesis and characterization of MoS2-carbon based materials for enhanced energy storage applications
Synthesis and characterization of MoS2-carbon based materials for enhanced energy storage applications Open
The article delves into the synthesis and characterization of MoS 2 -carbon-based materials, holding promise for applications in supercapacitors and ion batteries. The synthesis process entails the preparation of MoS 2 and its carbon hybri…
View article: Determination of Sodium Ion Diffusion Coefficient in Tin Sulfide@Carbon Anode Material Using GITT and EIS Techniques
Determination of Sodium Ion Diffusion Coefficient in Tin Sulfide@Carbon Anode Material Using GITT and EIS Techniques Open
The electroanalytical behavior of SnSx (x = 1, 2) encapsulated into a carbon phase was studied using the galvanostatic intermittent titration technique (GITT) and electrochemical impedance spectroscopy (EIS). These techniques are widely ut…
View article: Synthesis and Characterization of Mos2-Carbon Based Materials for Enhanced Energy Storage Applications
Synthesis and Characterization of Mos2-Carbon Based Materials for Enhanced Energy Storage Applications Open
View article: The new method of ZnIn2S4 synthesis on the titania nanotubes substrate with enhanced stability and photoelectrochemical performance
The new method of ZnIn2S4 synthesis on the titania nanotubes substrate with enhanced stability and photoelectrochemical performance Open
View article: Controlling crystallites orientation and facet exposure for enhanced electrochemical properties of polycrystalline MoO3 films
Controlling crystallites orientation and facet exposure for enhanced electrochemical properties of polycrystalline MoO3 films Open
This study focuses on the development and optimization of MoO 3 films on commercially available FTO substrates using the pulsed laser deposition (PLD) technique. By carefully selecting deposition conditions and implementing post-treatment …
View article: Crystal Crafting: Controlling Crystallites Orientation and Facet Exposure for Enhanced Electrochemical Properties of Polycrystalline MoO3 Films
Crystal Crafting: Controlling Crystallites Orientation and Facet Exposure for Enhanced Electrochemical Properties of Polycrystalline MoO3 Films Open
This study focuses on the development and optimization of MoO 3 films on commercially available FTO substrates using the pulsed laser deposition (PLD) technique. By carefully selecting deposition conditions and implementing post-treatment …
View article: New light on the photocatalytic performance of NH4V4O10 and its composite with rGO
New light on the photocatalytic performance of NH4V4O10 and its composite with rGO Open
View article: Synthesis and Characterization of Mos2-Carbon Based Materials for Enhanced Energy Storage Applications
Synthesis and Characterization of Mos2-Carbon Based Materials for Enhanced Energy Storage Applications Open
View article: Ti-Fe2o3/In2o3 as Photoactive Material: The Role of the Substrate in Photoelectrochemical Water Oxidation
Ti-Fe2o3/In2o3 as Photoactive Material: The Role of the Substrate in Photoelectrochemical Water Oxidation Open
View article: Hydrothermal synthesis of Ti-Fe2O3 /In2O3 on the TiO2 nanotubes substrate for highly efficient photoelectrochemical water oxidation
Hydrothermal synthesis of Ti-Fe2O3 /In2O3 on the TiO2 nanotubes substrate for highly efficient photoelectrochemical water oxidation Open
The layers of Ti-Fe 2 O 3 /In 2 O 3 were prepared on the TiO 2 nanotubes using hydrothermal method. The obtained materials were tested as photoanodes for water oxidation under sunlight irradiation. Deposited films were characterized using …
View article: The phenomenon of increasing capacitance induced by 1T/2H-MoS2 surface modification with Pt particles – Influence on composition and energy storage mechanism
The phenomenon of increasing capacitance induced by 1T/2H-MoS2 surface modification with Pt particles – Influence on composition and energy storage mechanism Open
In this paper, several approaches to the synthesis of molybdenum-based electrode materials for supercapacitors are presented, including anodization, hydrothermal process and annealing. For the material prepared via anodization of a molybde…
View article: Influence of hydrochloric acid concentration and type of nitrogen source on the electrochemical performance of TiO2/N-MoS2 for energy storage applications
Influence of hydrochloric acid concentration and type of nitrogen source on the electrochemical performance of TiO2/N-MoS2 for energy storage applications Open
In this work, nitrogen-doped molybdenum sulfide was directly deposited on titanium dioxide nanotubes substrate (TiO2/N-MoS2) during hydrothermal synthesis. The study focuses on the influence of hydrochloric acid concentration used for the …
View article: Poly(hydroxybutyrate-co-hydroxyvalerate) as a biodegradable binder in a negative electrode material for lithium-ion batteries
Poly(hydroxybutyrate-co-hydroxyvalerate) as a biodegradable binder in a negative electrode material for lithium-ion batteries Open
In this work, graphite-based negative electrode for lithium-ion battery consisting a novel and biodegradable binder poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) is compared with standard graphite electrode with polyvinylidene fluoride (…
View article: Insight into Potassium Vanadates as Visible-Light-Driven Photocatalysts: Synthesis of V(IV)-Rich Nano/Microstructures for the Photodegradation of Methylene Blue
Insight into Potassium Vanadates as Visible-Light-Driven Photocatalysts: Synthesis of V(IV)-Rich Nano/Microstructures for the Photodegradation of Methylene Blue Open
Photocatalysis is regarded as a promising tool for wastewater remediation. In recent years, many studies have focused on investigating novel photocatalysts driven by visible light. In this study, K2V6O16·
View article: Poly(Hydroxybutyrate-Co-Hydroxyvalerate) as a Biodegradable Binder in a Negative Electrode Material for Lithium-Ion Batteries
Poly(Hydroxybutyrate-Co-Hydroxyvalerate) as a Biodegradable Binder in a Negative Electrode Material for Lithium-Ion Batteries Open
View article: Hydrothermal Synthesis of Ti-Fe2o3/In2o3 on the Tio2 Nanotubes Substrate for Highly Efficient Photoelectrochemical Water Oxidation
Hydrothermal Synthesis of Ti-Fe2o3/In2o3 on the Tio2 Nanotubes Substrate for Highly Efficient Photoelectrochemical Water Oxidation Open
View article: The New Method of Synthesis of Znin2s4 on the Titania Nanotubes Substrate with Enhanced Stability and Photoelectrochemical Performance
The New Method of Synthesis of Znin2s4 on the Titania Nanotubes Substrate with Enhanced Stability and Photoelectrochemical Performance Open
View article: Influence of Hydrochloric Acid Concentration and Type of Nitrogen Source on the Electrochemical Performance of Tio2/N-Mos2 for Energy Storage Applications
Influence of Hydrochloric Acid Concentration and Type of Nitrogen Source on the Electrochemical Performance of Tio2/N-Mos2 for Energy Storage Applications Open
View article: Scaling Up the Process of Titanium Dioxide Nanotube Synthesis and Its Effect on Photoelectrochemical Properties
Scaling Up the Process of Titanium Dioxide Nanotube Synthesis and Its Effect on Photoelectrochemical Properties Open
In this work, for the first time, the influence of scaling up the process of titanium dioxide nanotube (TiO2NT) synthesis on the photoelectrochemical properties of TiO2 nanotubes is presented. Titanium dioxide nanotubes were obtained on su…
View article: Influence of alkali metal cations on the photoactivity of crystalline and exfoliated amorphous WO3 – photointercalation phenomenon
Influence of alkali metal cations on the photoactivity of crystalline and exfoliated amorphous WO3 – photointercalation phenomenon Open
In order to investigate the effect of photointercalation on photoelectrochemical properties, two types of WO3-based photoanodes, bulk and exfoliated have been prepared and investigated. An aqueous exfoliation method is introduced for the s…
View article: Tin Oxide Encapsulated into Pyrolyzed Chitosan as a Negative Electrode for Lithium Ion Batteries
Tin Oxide Encapsulated into Pyrolyzed Chitosan as a Negative Electrode for Lithium Ion Batteries Open
Tin oxide is one of the most promising electrode materials as a negative electrode for lithium-ion batteries due to its higher theoretical specific capacity than graphite. However, it suffers lack of stability due to volume changes and low…
View article: Improving the Performance of a Graphite Foil/Polyaniline Electrode Material by a Thin PEDOT:PSS Layer for Application in Flexible, High Power Supercapacitors
Improving the Performance of a Graphite Foil/Polyaniline Electrode Material by a Thin PEDOT:PSS Layer for Application in Flexible, High Power Supercapacitors Open
In this study, we present a novel strategy for enhancing polyaniline stability and thus obtaining an electrode material with practical application in supercapacitors. A promising (graphite foil/polyaniline/poly(3,4-ethylenedioxythiophene):…
View article: An Aqueous Exfoliation of WO3 as a Route for Counterions Fabrication—Improved Photocatalytic and Capacitive Properties of Polyaniline/WO3Composite
An Aqueous Exfoliation of WO3 as a Route for Counterions Fabrication—Improved Photocatalytic and Capacitive Properties of Polyaniline/WO3Composite Open
In this paper, we demonstrate a novel, electrochemical route of polyaniline/tungsten oxide (PANI)/WO3) film preparation. Polyaniline composite film was electrodeposited on the FTO (fluorine-doped tin oxide) substrate from the aqueous elect…
View article: Enhanced Charge Storage Mechanism and Long-Term Cycling Stability in Diamondized Titania Nanocomposite Supercapacitors Operating in Aqueous Electrolytes
Enhanced Charge Storage Mechanism and Long-Term Cycling Stability in Diamondized Titania Nanocomposite Supercapacitors Operating in Aqueous Electrolytes Open
The long cycle life stability and high energy density are limiting broader feasible applications of supercapacitors (SCs). The novel diamondized titania nanocomposite SCs deliver high power and energy densities along with high capacitance …
View article: An Easy and Ecological Method of Obtaining Hydrated and Non-Crystalline WO3−x for Application in Supercapacitors
An Easy and Ecological Method of Obtaining Hydrated and Non-Crystalline WO3−x for Application in Supercapacitors Open
In this work, we report the synthesis of hydrated and non-crystalline WO3 flakes (WO3−x) via an environmentally friendly and facile water-based strategy. This method is described, in the literature, as exfoliation, however, based on the re…
View article: Diatoms Biomass as a Joint Source of Biosilica and Carbon for Lithium-Ion Battery Anodes
Diatoms Biomass as a Joint Source of Biosilica and Carbon for Lithium-Ion Battery Anodes Open
The biomass of one type cultivated diatoms (Pseudostaurosira trainorii), being a source of 3D-stuctured biosilica and organic matter—the source of carbon, was thermally processed to become an electroactive material in a potential range ade…
View article: Pulsed Laser Deposition of Bismuth Vanadate Thin Films—The Effect of Oxygen Pressure on the Morphology, Composition, and Photoelectrochemical Performance
Pulsed Laser Deposition of Bismuth Vanadate Thin Films—The Effect of Oxygen Pressure on the Morphology, Composition, and Photoelectrochemical Performance Open
Thin layers of bismuth vanadate were deposited using the pulsed laser deposition technique on commercially available FTO (fluorine-doped tin oxide) substrates. Films were sputtered from a sintered, monoclinic BiVO4 pellet, acting as the ta…