Explanipedia

EFFECT OF FLUX APPLICATION DURING IN-SITU CASTING AS A DIRECT RECYCLING OF ALSI7MG ALUMINIUM ALLOY MACHINING CHIPS Open

Ain Zubaidah Samian, Aslinda Saleh, Norfazillah Talib, Haslina Abdullah, Lee Woon Kiow · 2025

Recycling aluminium (Al) waste by secondary smelting production saves 95% energy had encourages a new alternative recycling technique known as the in-situ casting or melting to transform waste into product directly. Therefore, aluminium (A…

The Investigation of Material Removal Rate on Electrical Discharge Machining of Titanium Alloys (Ti-6Al-4V) at Different Peak Currents and Pulse Durations by Using RBD Palm Oil and Kerosene as Dielectric Fluids Open

Said Ahmad, Aiman Supawi, Norfazillah Talib, Lee Woon Kiow, Ho Fu Haw , et al. · 2024

The type of dielectric fluid is the most significant component that might affect the machining performance of EDM such as material removal, tool wear, and electrode surface roughness. However, the most serious of these issues is the inabil…

Electrode Wear Rate of RBD Palm Oil as Dielectric Fluids on Electrical Discharge Machining (EDM) at Different Peak Current and Pulse Duration of Titanium Alloys Open

Aiman Supawi, Said Ahmad, Norfazillah Talib, Lee Woon Kiow, Ho Fu Haw , et al. · 2024

Electrical Discharge Machining (EDM) is a widely utilized commercial method for generating a variety of forms of materials that are used as the fundamental material in a wide range of industries. Vegetable oil as the dielectric fluid is on…

Sustainable Electrical Discharge Machining (EDM) Of Inconel 718 When Using RBD Palm Oil Based Dielectric Fluid Open

Said Ahmad, Vellmurugan Mohan, Mohd Amri Lajis, Ho Fu Haw, Lee Woon Kiow , et al. · 2023

Electrical Discharge Machining (EDM) is the process of removing metal from a workpiece by discharging a sequence of discrete sparks from a highcurrent and voltage electrical arc. Using a sustainable electrical discharge machining (EDM) tec…

Development of A Tool Condition Monitoring System for Flank Wear in Turning Process Using Machine Learning Open

Idris Ishak, Lee Woon Kiow · 2023

Computer-numerical control (CNC) machining has become the norm in most manufacturing businesses. In order to maximize machining efficiency, prevent unintended damage, and maintain product quality all at once, tool wear measurement is essen…

Physical Properties of New Formulation of Hybrid Nanofluid-based Minimum Quantity Lubrication (MQL) from Modified Jatropha Oil as Metalworking Fluid Open

Ainaa Mardhiah Sabri, Norfazillah Talib, Nur Syazwani Filzah Mohd Saad, Amiril Sahab Abdul Sani, Sandip Kunar , et al. · 2023

As a metalworking fluid, vegetable-based crude jatropha oil (CJO) was used in place of petroleum-based oil. The use of petroleum-oil-based metalworking fluids poses significant environmental and health concerns. Furthermore, it has a large…

Electrode Wear Rate On Electrical Discharge Machining of Titanium Alloys (Ti-6Al-4V) At Different Peak Current and Pulse Duration by Using Modified RBD Palm Oil as Dielectric Fluids Open

Aiman Supawi, Said Ahmad, Norfazillah Talib, Lee Woon Kiow, Ho Fu Haw , et al. · 2022

Electrical Discharge Machining (EDM) is a machining process in terms of thermoelectric that removes metal by discharging a discrete sparks series of the metal and workpiece. The cutting tool in EDM has used an electric spark to cut the wor…

Characteristics of Oxide Layer Formed on the Aluminium (LM6) Alloy and Aluminium (ADC12) Alloy During In-Situ Melting Open

Ain Zubaidah Samian, Aslinda Saleh, Nur Syuhada Mohd Yaacob, Faezah Mohd Esa, Norfazillah Talib , et al. · 2021

In-situ melting, also known as an in-situ casting, is a new casting technique that reduces the formation of porosities in aluminium (Al) castings by removing the need for pouring. The melting phenomena of Al are influenced by its oxidation…

Optimization of Tool Path Length on Three-Dimensional Drilling Application Using Ant Colony Algorithm Open

Muhammad Rusman, Haslina Abdullah, Mohamad Shukri Zakaria, Norfazillah Talib, Lee Woon Kiow , et al. · 2021

The lower machining time is important characteristic in the drilling machining process. Drilling process costs will increase if the machining time is high. Therefore, the main objective of this research is to develop Ant Colony Algorithm (…

Tribological Study of Activated Carbon Nanoparticle in Nonedible Nanofluid for Machining Application Open

Norfazillah Talib, Nor Athira Jamaluddin, Tan Sheng, Lee Woon Kiow, Haslina Abdullah , et al. · 2021

Nonedible vegetable-based oil was recently explored due to the demand for a sustainable element in a machining process. The aim of this study is to critically analyse the tribological performance of nanofluid from nonedible (modified jatro…

Optimization of Drilling Process Using Non-Conventional Method Open

Haslina Abdullah, Mohamad Shukri Zakaria, Norfazillah Talib, Lee Woon Kiow, Aslinda Saleh · 2020

A Novel Real Time Visual Tracking Method Using Modified Flower Pollination Algorithm Open

Ong Kok Meng, Pauline Ong, Sia Chee Kiong, Low Ee Soong, Lee Woon Kiow · 2019

This study presented a novel algorithm, namely, modified flower pollination algorithm (MFPA), for moving object tracking in real time video. Three variables, i.e., x-coordinate, y-coordinate and width, known as search window, were used to …

Application of Wavelet Analysis in Tool Wear Evaluation Using Image Processing Method Open

Lee Woon Kiow, Syed Mohamad Aiman Tuan Muda, Ong Pauline, Sia Chee Kiong, Norfazillah Talib , et al. · 2018

Tool wear plays a significant role for proper planning and control of machining parameters to maintain the product quality. However, existing tool wear monitoring methods using sensor signals still have limitations. Since the cutting tool …

Lee Woon Kiow YOU? Author Swipe