Martin F. Sunding
YOU?
Author Swipe
View article: Evaluation of two CaMn1−x−yTixFeyO3−δ-based granules oxygen carriers for chemical looping applications
Evaluation of two CaMn1−x−yTixFeyO3−δ-based granules oxygen carriers for chemical looping applications Open
Upscaling of the laboratory oxygen carriers while keeping comparable performance as laboratory powders remains a challenge in the field of chemical looping combustion (CLC). In this work, two perovskite compositions of CaMn 0.375 Ti 0.5 Fe…
View article: High yield and wide lateral size growth of α-Mo<sub>2</sub>C: exploring the boundaries of CVD growth of bare MXene analogues
High yield and wide lateral size growth of α-Mo<sub>2</sub>C: exploring the boundaries of CVD growth of bare MXene analogues Open
Synthesis of Mo 2 C bare MXenes, without surface terminations groups, via chemical vapor deposition (CVD) on metal foils is scientifically a very intriguing crystal growth process, and there are still challenges and limited fundamental und…
View article: Investigating solar degradation mechanisms of the Ta3N5 photoelectrode by in-situ transmission electron microscopy
Investigating solar degradation mechanisms of the Ta3N5 photoelectrode by in-situ transmission electron microscopy Open
View article: Data for "High yield and wide lateral size growth of α-Mo2C: Exploring the boundaries of CVD growth of bare MXene analogues"
Data for "High yield and wide lateral size growth of α-Mo2C: Exploring the boundaries of CVD growth of bare MXene analogues" Open
Images and data underlying the results in published scientific paper "High yield and wide lateral size growth of α-Mo2C: Exploring the boundaries of CVD growth of bare MXene analogues" (DOI 10.1088/1361-6528/ad1c97)
View article: Data from "High yield and wide lateral size growth of α-Mo2C: Exploring the boundaries of CVD growth of bare MXene analogues"
Data from "High yield and wide lateral size growth of α-Mo2C: Exploring the boundaries of CVD growth of bare MXene analogues" Open
Images and data underlying the results in published scientific paper "High yield and wide lateral size growth of α-Mo2C: Exploring the boundaries of CVD growth of bare MXene analogues" (DOI 10.1088/1361-6528/ad1c97)
View article: Zn Redistribution and Volatility in ZnZrO<sub><i>x</i></sub> Catalysts for CO<sub>2</sub> Hydrogenation
Zn Redistribution and Volatility in ZnZrO<sub><i>x</i></sub> Catalysts for CO<sub>2</sub> Hydrogenation Open
ZnO-ZrO2 mixed oxide (ZnZrOx) catalysts are widely studied as selective catalysts for CO2 hydrogenation into methanol at high-temperature conditions (300-350 °C) that are preferred for the subsequent…
View article: Interrogation of the Interfacial Energetics at a Tantalum Nitride/Electrolyte Heterojunction during Photoelectrochemical Water Splitting by <i>Operando</i> Ambient Pressure X-ray Photoelectron Spectroscopy
Interrogation of the Interfacial Energetics at a Tantalum Nitride/Electrolyte Heterojunction during Photoelectrochemical Water Splitting by <i>Operando</i> Ambient Pressure X-ray Photoelectron Spectroscopy Open
Photoelectrochemical (PEC) water electrolysis is an important energy conversion (power-to-chemical) method, providing a solution to the intermittent nature of solar energy. However, as PEC systems usually suffer from low operational stabil…
View article: Effect of graphene coatings on the morphology of submillimeter thin copper wires after salt spray aging
Effect of graphene coatings on the morphology of submillimeter thin copper wires after salt spray aging Open
Unprotected copper conductors are prone to oxidation and corrosion, especially when in contact with salt water or at high temperature. In this study, we compared commercially available coating with graphene oxide and plasma-enhanced chemic…
View article: Oxygen production at intermediate temperatures using Ca2AlMnO5+δ double perovskite-type oxides
Oxygen production at intermediate temperatures using Ca2AlMnO5+δ double perovskite-type oxides Open
Double-perovskite Ca 2 AlMnO 5+δ exhibits promising oxygen uptake and release capacity at intermediate temperatures (400–700 °C), which makes it an interesting candidate for in situ oxygen production in an integrated gasification combined …
View article: Investigation of Phosphorous Contaminated V/W-Tio2 Monolith Catalysts Used for Nh3-Scr of Nox in Bio-Fuel Combustion Exhaust
Investigation of Phosphorous Contaminated V/W-Tio2 Monolith Catalysts Used for Nh3-Scr of Nox in Bio-Fuel Combustion Exhaust Open
View article: On the mechanism of Mn(II)-doping in Scandia stabilized zirconia electrolytes
On the mechanism of Mn(II)-doping in Scandia stabilized zirconia electrolytes Open
Cubic Scandia-stabilized zirconia (ScSZ) is an attractive electrolyte material for solid oxide cells due to its significant ionic conductivity, provided that the phase transition to its rhombohedral polymorph upon cooling is suppressed. Th…
View article: High entropy alloy CrFeNiCoCu sputter deposited films: Structure, electrical properties, and oxidation
High entropy alloy CrFeNiCoCu sputter deposited films: Structure, electrical properties, and oxidation Open
High entropy alloy (HEA) films of CrFeCoNiCu were deposited by sputtering. Their structure was characterized and their electric transport properties were studied by temperature-dependent Hall and Seebeck measurements. The HEA films show a …
View article: Controlling the Electrical Properties of Reactively Sputtered High Entropy Alloy CrFeNiCoCu Films
Controlling the Electrical Properties of Reactively Sputtered High Entropy Alloy CrFeNiCoCu Films Open
Oxide-containing films were made by reactively sputtering a high-entropy alloy target of CrFeCoNiCu. We report on a wide range of changes to the electrical properties made by different heat treatments in oxidizing and reducing atmospheres,…
View article: Temperature‐Dependent Adhesion in van der Waals Heterostructures
Temperature‐Dependent Adhesion in van der Waals Heterostructures Open
The interlayer coupling between 2D materials is immensely important for both the fundamental understanding of these systems, and for the development of transfer techniques for the fabrication of van der Waals (vdW) heterostructures. A numb…
View article: High Entropy Alloy CrFeNiCoCu sputtered films
High Entropy Alloy CrFeNiCoCu sputtered films Open
High entropy alloy(HEA) films of CrFeCoNiCu were prepared by sputtering, their structure was characterized, and their electric properties measured by temperature dependent Hall and Seebeck measurement. The HEA films show a solid solution w…
View article: Corrosion performance and degradation mechanism of a bi-metallic aluminum structure processed by wire-arc additive manufacturing
Corrosion performance and degradation mechanism of a bi-metallic aluminum structure processed by wire-arc additive manufacturing Open
View article: Roadmap for additive manufacturing of HAYNES® 282® superalloy by laser beam powder bed fusion (PBF-LB) technology
Roadmap for additive manufacturing of HAYNES® 282® superalloy by laser beam powder bed fusion (PBF-LB) technology Open
Although various alloy systems have been explored for additive manufacturing (AM) during the past decade, introducing a new alloy remains a challenging task. Most of the materials require iterative builds, for investigating numerous parame…
View article: Partial Oxidation of High Entropy Alloys. A Route Towards Nanostructured Ferromagnets?
Partial Oxidation of High Entropy Alloys. A Route Towards Nanostructured Ferromagnets? Open
View article: Correlation between surface chemistry and morphology of PtCu and Pt nanoparticles during oxidation-reduction cycle
Correlation between surface chemistry and morphology of PtCu and Pt nanoparticles during oxidation-reduction cycle Open
Process conditions during catalytic reactions induce significant changes in surface chemistry and structure of bi- (mono) metallic nanoparticles leading to their deactivation, and this can ultimately affect the reactions long-term performa…
View article: Surface Reconstruction, Hydration, and Adhesion of Epoxy to the (0001) Surface of α-Berlinite: Insights from Density Functional Theory Calculations
Surface Reconstruction, Hydration, and Adhesion of Epoxy to the (0001) Surface of α-Berlinite: Insights from Density Functional Theory Calculations Open
Phosphoric acid anodization (PAA) is a candidate for replacement of toxic chromates during the surface treatment of aluminum prior to gluing in the aerospace industry. During PAA, a layer of AlPO4 forms on top of the alumina layer. We appl…
View article: Roadmap for Additive Manufacturing of Haynes® 282® Superalloy by Laser Beam Powder Bed Fusion (PBF-LB) Technology
Roadmap for Additive Manufacturing of Haynes® 282® Superalloy by Laser Beam Powder Bed Fusion (PBF-LB) Technology Open
View article: Multi-purpose structured catalysts designed and manufactured by 3D printing
Multi-purpose structured catalysts designed and manufactured by 3D printing Open
View article: Fabrication process parameters significantly affect the perovskite oxygen carriers materials (OCM) performance in chemical looping with oxygen uncoupling (CLOU)
Fabrication process parameters significantly affect the perovskite oxygen carriers materials (OCM) performance in chemical looping with oxygen uncoupling (CLOU) Open
The CLOU performance of the CaTi x Mn 0.9−x Mg 0.1 O 3 (CMTM) perovskite-type system was investigated, comparing materials produced at laboratory scale with those made at industrial ton scale. The CLOU and conversion performances were stud…
View article: Surface reactivity and cation non-stoichiometry in BaZr<sub>1−x</sub>Y<sub>x</sub>O<sub>3−δ</sub> (<i>x</i> = 0–0.2) exposed to CO<sub>2</sub> at elevated temperature
Surface reactivity and cation non-stoichiometry in BaZr<sub>1−x</sub>Y<sub>x</sub>O<sub>3−δ</sub> (<i>x</i> = 0–0.2) exposed to CO<sub>2</sub> at elevated temperature Open
Surface formation of BaCO3 mainly proceeds by transfer of Y to the Ba-site while a BaZrO3 formula unit is consumed.
View article: High cycle fatigue life estimation of AlSi10Mg processed by laser powder bed fusion
High cycle fatigue life estimation of AlSi10Mg processed by laser powder bed fusion Open
Fatigue life is known to be dependent on the surface properties of the material. Surface roughness provokes local stress concentration and cause crack initiation even at minute cyclic loads. In laser powder bed fusion, the as-built surface…
View article: Optimisation of growth parameters to obtain epitaxial Y-doped BaZrO3 proton conducting thin films
Optimisation of growth parameters to obtain epitaxial Y-doped BaZrO3 proton conducting thin films Open
View article: Reference data set of volcanic ash physicochemical and optical properties
Reference data set of volcanic ash physicochemical and optical properties Open
Uncertainty in the physicochemical and optical properties of volcanic ash particles creates errors in the detection and modeling of volcanic ash clouds and in quantification of their potential impacts. In this study, we provide a data set …
View article: Silicon Powder Based Ingots and Substrates, Processed by Spark Plasma Sintering
Silicon Powder Based Ingots and Substrates, Processed by Spark Plasma Sintering Open
This work presents results concerning sintering of silicon powder based wafers and ingots produced the by Spark Plasma Sintering (SPS) method. It is shown that wafering of such ingots can be done by conventional wire sawing. Light microsco…
View article: Cover Picture: Performance of Perovskite‐Type Oxides as Oxygen‐Carrier Materials for Chemical Looping Combustion in the Presence of H<sub>2</sub>S (Energy Technol. 10/2016)
Cover Picture: Performance of Perovskite‐Type Oxides as Oxygen‐Carrier Materials for Chemical Looping Combustion in the Presence of H<sub>2</sub>S (Energy Technol. 10/2016) Open
Chemical Looping for Success: The multi-national chemical looping combustion (CLC) project, SUCCESS (http://www.clc-success.eu/), is the largest European attempt to provide a rigorous upscaling solution to gaseous fuel CLC. SUCCESS covers …
View article: Performance of Perovskite‐Type Oxides as Oxygen‐Carrier Materials for Chemical Looping Combustion in the Presence of H<sub>2</sub>S
Performance of Perovskite‐Type Oxides as Oxygen‐Carrier Materials for Chemical Looping Combustion in the Presence of H<sub>2</sub>S Open
In this study, the redox behavior and the effect of the presence of sulfur on the performance of the CaTi x Mn 0.9− x Mg 0.1 O 3 perovskite‐type system were investigated. A detailed thermodynamic and thermogravimetric approach combined wit…