Mohd Khairul Fadzly Md Radzi

Optimising Laser Harvesting: Nozzle Beam Selection For Enhanced Cutting Efficiency Open

Mohd Ikmal Hafizi Azaman, Mohd Ramdhan Mohd Khalid, Mohd Khairul Fadzly Md Radzi, Aminulrashid Mohamed, Mohd Azwan Mohd Bakri · 2025

Laser harvesting technology has emerged as a promising approach for efficient and precise harvesting in agricultural settings, particularly in the oil palm industry. The success of this technology relies on the careful selection of optical…

The Initiative to Further Enhance Technology Adoption in the Malaysian Oil Palm Industry Open

Mohd Khairul Fadzly Md Radzi, Mohd Ramdhan Mohd Khalid, Mohd Ikmal Hafizi Azaman, Aminulrashid Mohamed, Daryl Jay Thadeus , et al. · 2023

The oil palm industry is facing highly severe labour shortages where most labourers involved in the plantation consist of foreign workers. The usage of manual labourers revealed several negative drawbacks which has caused lower productivit…

An Overview of the Benefits and Advantages of Implementing Mechanisation in the Oil Palm Plantation: A Look at Fresh Fruit Bunch (FFB) Evacuation Open

Daryl Jay Thaddeus, Mohd Azwan Mohd Bakri, Mohd Ramdhan Mohd Khalid, Mohd Rizal Ahmad, Mohd Ikmal Hafizi Azaman , et al. · 2023

The oil palm industry is labour-intensive to efficiently sustain the productivity of plantations. This article aims to review the benefits and advantages of mechanisation and introduce the types of machinery available to achieve it. The im…

Performance Comparison of Trunk Injection Mechanisms for Ganoderma Control Open

Mohd Ikmal Hafizi Azaman, Mohd Ramdhan Mohd Khalid, Mohd Khairul Fadzly Md Radzi, Mohd Azwan Mohd Bakri · 2023

A severe disease known as Ganoderma Boninense, which attacks a group of wood-decaying fungi, causes Basal Stem Rot (BSR) in oil palm trees. One of the treatments introduced to control the spread is injecting a chemical into the palm's trun…

Evaluation and Comparison of the Ergonomics, Performance and Economics of Battery-Powered and Engine-Powered Palm Oil Harvesting Tools:Cantas Elektro Open

Mohd Rizal Ahmad, Mohd Khairul Fadzly Md Radzi, Ahmad Syazwan Ramli, Mohd Azwan Mohd Bakri, Mohd Ikmal Hafizi Azaman , et al. · 2023

The Malaysian Palm Oil Board (MPOB) has introduced an engine-powered palm oil harvesting tool called CANTAS that can double the conventional harvesting output. However, there are several issues that are affecting the endurance and comfort …

Preliminary Assessment of Exoskeleton Suit Assistance for Fresh Fruit Bunch (FFB) Collecting Task in Oil Palm Plantation Open

Mohd Khairul Fadzly Md Radzi, Mohd Azwan Mohd Bakri, Mohd Ramdhan Mohd Khalid, Mohd Ikmal Hafizi Azaman, Mohd Rizal Ahmad · 2022

Exoskeletons have been widely used in rehabilitation and heavy work. The concept of exoskeleton technology showed encouraging results in helping to reduce workload and limb movements. In fact, exoskeleton worn on the upper or lower limbs i…

Problems and Constraints Involved in the Injection Moulding Process of Biocomposites: A Review Open

Mohd Khairul Fadzly Md Radzi, Norhamidi Muhamad, Abu Bakar Sulong, Nabilah Afiqah Mohd Radzuan, Mohd Ramdhan Mohd Khalid , et al. · 2021

Biocomposite materials have revolutionized the engineering field, predominantly in manufacturing applications, where these materials were widely used as an alternative to the metal-based structural body or component. Since conventional mat…

Evaluation of Soil Stabilizer in Oil Palm Plantation Road Construction Open

Abd Rahim Shuib, Mohd Khairul Fadzly Md Radzi, Aminulrashid Mohamed, Mohd Ramdhan Mohd Khalid · 2020

Plantation road construction is an important part that requires a serious planning. Any negligence in constructing and maintaining the roads will affect the infield transportation time of the harvested agricultural products as well as the …

Optimisation of parameters laser cutting of oil palm fronds using fibre pulsed laser of 1064 Nm wavelength system Open

Mohd Ikmal Hafizi Azaman, Mohd Adzir Mahdi, Mohd Rizal Ahmad, Abd Rahim Shuib, Mohd Ramdhan Mohd Khalid , et al. · 2020

Oil palm plantations produce fresh fruit bunches (FFB) as their primary output. Over the years, several technologies for cutting oil palm fronds and FFB have been developed and only a few of these technologies have been taken up by the ind…

Influence of Multiwalled Carbon Nanotubes on the Rheological Behavior and Physical Properties of Kenaf Fiber-Reinforced Polypropylene Composites Open

Farah ’Atiqah Abdul Azam, Zakaria Razak, Mohd Khairul Fadzly Md Radzi, Norhamidi Muhamad, Che Hassan Che Haron , et al. · 2020

The incorporation of kenaf fiber fillers into a polymer matrix has been pronounced in the past few decades. In this study, the effect of multiwalled carbon nanotubes (MWCNTs) with a short kenaf fiber (20 mesh) with polypropylene (PP) added…

Mechanical static structural analysis of CANTAS sickle blade Open

Ahmad Syazwan Ramli, Abd Rahim Shuib, Mohd Azwan Mohd Bakri, Mohd Ikmal Hafizi Mohd Azaman, Mohd Khairul Fadzly Md Radzi , et al. · 2020

A CANTAS is a motorized palm tree cutter which is specially developed to ease the process of harvesting oil palm fresh fruit bunch (FFB). The most crucial part of this machine is the top sickle which is vibrated by the help of a motor to f…

Development of a harvesting and transportation machine for oil palm plantations Open

Abd Rahim Shuib, Mohd Khairul Fadzly Md Radzi, Mohd Azwan Mohd Bakri, Mohd Ramdhan Mohd Khalid · 2020

Harvesting and transportation represent a substantial proportion of the labor cost of a plantation. Additionally, it involves continuous production of fresh fruit bunches (FFB) by oil palm to the difficulty in mechanizing process that depe…

Kenaf Composites for Automotive Components: Enhancement in Machinability and Moldability Open

Nabilah Afiqah Mohd Radzuan, Nur Farhani Ismail, Mohd Khairul Fadzly Md Radzi, Zakaria Razak, Izdihar Binti Tharizi , et al. · 2019

To date, the mechanical performance of kenaf composites is still unsatisfied in term of its mechanical performance. Therefore, research focuses on kenaf composites fabrication through the selection of polymer resin, including epoxy, polypr…

Development of a six-wheel drive vehicle: A comparative study on steering performance Open

Abd Rahim Shuib, Mohd Azwan Mohd Bakri, Mohd Khairul Fadzly Md Radzi · 2019

The innovation for the recent agriculture tractors have been widely developed. These tractors are used to enhance the harvesting activities in way to lowering the labour cost. However, the current system of infield collection of oil palm f…

Kenaf Fiber Composites: A Review on Synthetic and Biodegradable Polymer Matrix Open

Dulina Tholibon, ‪Izdihar Tharazi, Abu Bakar Sulong, Norhamidi Muhamad, Nur Farhani Ismail , et al. · 2019

This review paper deals with the previous and current works published on the kenaf fiber composites. Kenaf is grown commercially in South East Asia country and widely used in the construction and infrastructure as well as in the automotive…

Numerical Simulation Analysis of Wood/PP Composites for Injection-Moulded Car Battery Trays Open

Zakaria Razak, Abu Bakar Sulong, Norhamidi Muhamad, Mohd Khairul Fadzly Md Radzi, Nur Farhani Ismail , et al. · 2018

This research focused on the simulation analysis of wood polymer composites (WPCs) based on polypropylene (PP) for the injection moulding of automotive parts, namely car battery trays (CBTs). A plastic CBT, which is commonly used to suppor…

The effect of kenaf filler reinforcement on the mechanical and physical properties of injection moulded polypropylene composites Open

Mohd Khairul Fadzly Md Radzi, Norhamidi Muhamad, Majid Niaz Akhtar, Zakaria Razak, Farhana Mohd Foudzi · 2018

Natural fibres potentially offer better reinforcement to improve the mechanical and physical properties of polymer composites. However, these natural materials at this stage are not fully explored yet due to the fibres themselves have li…

Optimization of Hot Press Parameters on Tensile Strength for Unidirectional Long Kenaf Fiber Reinforced Polylactic-Acid Composite Open

‪Izdihar Tharazi, Abu Bakar Sulong, Norhamidi Muhamad, Che Hassan Che Haron, Dulina Tholibon , et al. · 2017

Processing conditions are one of the factors that significantly influences the properties and characteristics of the polymer matrix composites products. Therefore, the suitable processing parameters must be selected in order to yield the o…

Effects of Fiber Content and Processing Parameters on Tensile Properties of Unidirectional Long Kenaf Fiber Reinforced Polylactic-Acid Composite / Izdihar Tharazi...[et al.] Open

‪Izdihar Tharazi, Norhamidi Muhamad, Nur Farhani Ismail, Mohd Khairul Fadzly Md Radzi, Zakaria Razak , et al. · 2017

Recent developments within the field of natural fiber-reinforced polymer composite have led to a renewed interest in fully biodegradable composite or green composite. Interest in using green composites is due to environmental awareness con…

Influence of alkaline treatment and fiber loading on the physical and mechanical properties of kenaf/polypropylene composites for variety of applications Open

Majid Niaz Akhtar, Abu Bakar Sulong, Mohd Khairul Fadzly Md Radzi, Norfarah Nadia Ismail, Muhammad Rafi Raza , et al. · 2016

Due to current trend and increasing interest towards natural based fiber products, Kenaf (Hibiscus cannabinus) fibers have been used for the developments of many products. Therefore, Kenaf fiber-reinforced composites have been widely used …

MOULDABILITY OF WOOD FILLER REINFORCED POLYPROPYLENE COMPOSITE FOR INJECTION MOULDED ENGINE COVER USING MOULD FILING SIMULATION Open

Mohd Khairul Fadzly Md Radzi, Abu Bakar Sulong, Baharuddin Mohd Zanggi, Norhamidi Muhammad · 2016

Feasibility studies about processing lignocellulosic reinforced polymer composites by injection moulding have been receiving widespread attention nowadays. The aim of this research was to identify the optimal selection of parameters, signi…

TENSILE PROPERTIES OF UNIDIRECTIONAL KENAF FIBER POLYPROPYLENE COMPOSITE Open

Dulina Tholibon, Abu Bakar Sulong, Norhamidi Muhammad, Nur Farhani Ismail, ‪Izdihar Tharazi , et al. · 2016

Over the last decade, awareness of environmental issues and the shortage of petroleum resources contribute to the important factors that encourage researchers to explore the potential use of natural fibers such as kenaf as reinforcement in…

Mohd Khairul Fadzly Md Radzi YOU? Author Swipe