Oskars Platnieks
YOU?
Author Swipe
View article: Electrospun antimicrobial poly(lactic acid) foams with nanocellulose for enhanced hydrophilicity and controlled drug release
Electrospun antimicrobial poly(lactic acid) foams with nanocellulose for enhanced hydrophilicity and controlled drug release Open
This study explores an advanced approach to enhancing the antimicrobial efficacy and drug release of poly(lactic acid) (PLA) scaffolds through the strategic incorporation of cellulose nanocrystals (CNC).
View article: Environmental degradation and durability of bulk 3D-printed parts from biodegradable polyester blends of PBS, PLA, and PHB in seawater
Environmental degradation and durability of bulk 3D-printed parts from biodegradable polyester blends of PBS, PLA, and PHB in seawater Open
This study examines behavior of 3D-printed biodegradable polyester blends in artificial seawater, revealing that print orientation and polymer composition critically affect water uptake, mechanical strength, and crystallinity.
View article: Thermomechanical and mechanical analysis of polylactic acid/polyhydroxyalkanoate/poly(butylene succinate- <i>co</i> -adipate) binary and ternary blends
Thermomechanical and mechanical analysis of polylactic acid/polyhydroxyalkanoate/poly(butylene succinate- <i>co</i> -adipate) binary and ternary blends Open
Research is increasingly focused on developing biodegradable polymers from renewable agricultural resources. Polymer blends, combining multiple polymers, deliver improved ductility and toughness while remaining cost-effective compared to s…
View article: Dielectric spectroscopy and synergistic effects in epoxy composites filled with multi‐walled carbon nanotubes and carbon‐coated copper nanoparticles
Dielectric spectroscopy and synergistic effects in epoxy composites filled with multi‐walled carbon nanotubes and carbon‐coated copper nanoparticles Open
The electromagnetic properties of epoxy‐based composites filled with carbon‐coated copper (Cu@C) nanoparticles and multi‐walled carbon nanotubes (MWCNTs), along with hybrid MWCNT/Cu@C/Epoxy systems containing varying concentrations of nano…
View article: Dielectric, low‐frequency noise and mechanical properties of hybrid carbon nanotubes/graphene nanoplatelets epoxy composites
Dielectric, low‐frequency noise and mechanical properties of hybrid carbon nanotubes/graphene nanoplatelets epoxy composites Open
This study analyzes the electrical, microwave (26–37 GHz), low‐frequency (20 Hz–10 kHz) noise, and mechanical properties of epoxy hybrid composites filled with multi‐walled carbon nanotubes (MWCNT) and graphene nanoplatelets (GNP). The sys…
View article: Valorizing Biopolyester Suberin: Modification of Cellulose Nanocrystals and Performance Assessment in 3D-Printed Biobased Acrylates
Valorizing Biopolyester Suberin: Modification of Cellulose Nanocrystals and Performance Assessment in 3D-Printed Biobased Acrylates Open
Suberin, a common biomass processing waste, is a complex biopolymer and a promising source for the biorefinery of chemicals. Six different approaches for the extraction of birch outer bark suberin fatty acids (SFAs) were explored, and thei…
View article: Exploring the Processing Potential of Polylactic Acid, Polyhydroxyalkanoate, and Poly(butylene succinate-co-adipate) Binary and Ternary Blends
Exploring the Processing Potential of Polylactic Acid, Polyhydroxyalkanoate, and Poly(butylene succinate-co-adipate) Binary and Ternary Blends Open
Biodegradable and bio-based polymers, including polyhydroxyalkanoate (PHA), polylactic acid (PLA), and poly(butylene succinate-co-adipate) (PBSA), stand out as sustainable alternatives to traditional petroleum-based plastics for a wide ran…
View article: Surface modification strategies for improved cellulose nanocrystal integration in 3D-Printed bio-based acrylate matrix
Surface modification strategies for improved cellulose nanocrystal integration in 3D-Printed bio-based acrylate matrix Open
The current application of renewable resources in vat photopolymerization (VP) 3D printing is rather limited, emphasizing the importance of incorporating bio-based materials into additive manufacturing (AM). In this study, VP 3D printing t…
View article: Evaluation of thermal conductivity models and dielectric properties in metal oxide-filled poly(butylene succinate-co-adipate) composites
Evaluation of thermal conductivity models and dielectric properties in metal oxide-filled poly(butylene succinate-co-adipate) composites Open
This study examines how various nanofillers impact thermal conductivity, dielectric characteristics, and electromagnetic interference (EMI) shielding potential of bio-based and biodegradable poly(butylene succinate-co-adipate) (PBSA). TiO …
View article: Sustainable foams from hemp, lignin, xylan, pectin, and glycerol: tunable via reversible citric acid crosslinking for absorption and insulation applications
Sustainable foams from hemp, lignin, xylan, pectin, and glycerol: tunable via reversible citric acid crosslinking for absorption and insulation applications Open
This study investigates the development of sustainable multifunctional foams utilizing hemp stalk waste, lignin, xylan, pectin, glycerol, and citric acid. Using the freeze-drying method for foam formation in combination with industrial was…
View article: A super-tough plant oil based elastomer for UV-light assisted 3D printed soft robotics and shape-memory
A super-tough plant oil based elastomer for UV-light assisted 3D printed soft robotics and shape-memory Open
Herein we introduce a plant oil-based elastomer system for 3D-printable soft robotics, offering high flexibility and resolution. Systems with varied mechanical properties in printed parts enable fast, delicate movements and the shape memor…
View article: Biodegradable Poly(butylene succinate) Laminate with Nanocellulose Interphase Layer for High-Barrier Packaging Film Application
Biodegradable Poly(butylene succinate) Laminate with Nanocellulose Interphase Layer for High-Barrier Packaging Film Application Open
In response to rising concerns over the environmental and human health ramifications of polymers derived from petroleum, particularly in the food packaging industry, research has pivoted towards more sustainable materials. Poly(butylene su…
View article: Effect of novel furan‐based ester reactive diluent on structure and properties of <scp>UV</scp>‐crosslinked acrylated rapeseed oil
Effect of novel furan‐based ester reactive diluent on structure and properties of <span>UV</span>‐crosslinked acrylated rapeseed oil Open
Unsaturated furan‐based ester (UES) was prepared by green electrosynthesis using a single‐cell setup and inexpensive graphite electrodes. The UES was validated as a reactive diluent for a bio‐based acrylated rapeseed oil (ARO). UV‐light ph…
View article: High Performance Triboelectric Nanogenerators from Compostable Cellulose‐Biodegradable Poly(Butylene Succinate) Composites
High Performance Triboelectric Nanogenerators from Compostable Cellulose‐Biodegradable Poly(Butylene Succinate) Composites Open
Triboelectric nanogenerator (TENG) devices are exemplar systems for mechanical‐to‐electrical energy conversion due to their simplicity and promising performance. However, little attention has been paid to recycling or reusing TENG devices.…
View article: Tailored Biobased Resins from Acrylated Vegetable Oils for Application in Wood Coatings
Tailored Biobased Resins from Acrylated Vegetable Oils for Application in Wood Coatings Open
The modern coating market is dominated by acrylic, polyurethane, and polyester polymer resins produced from unsustainable fossil resources. Herein, we propose the preparation of resins from biobased components to produce functional and sol…
View article: Multilayered Composites with Carbon Nanotubes for Electromagnetic Shielding Application
Multilayered Composites with Carbon Nanotubes for Electromagnetic Shielding Application Open
Bulk polylactic acid (PLA)/multiwall carbon nanotube (MWCNT) composites were prepared and investigated in wide frequency ranges (20 Hz–1 MHz and 24–40 GHz). It was determined that the percolation threshold in bulk PLA/MWCNT composites is c…
View article: Poly(Butylene Succinate) Hybrid Multi-Walled Carbon Nanotube/Iron Oxide Nanocomposites: Electromagnetic Shielding and Thermal Properties
Poly(Butylene Succinate) Hybrid Multi-Walled Carbon Nanotube/Iron Oxide Nanocomposites: Electromagnetic Shielding and Thermal Properties Open
To address the ever-increasing electromagnetic interference (EMI) pollution, a hybrid filler approach for novel composites was chosen, with a focus on EMI absorbance. Carbon nanofiller loading was limited to 0.6 vol.% in order to create a …
View article: Comparison of Carbon-Nanoparticle-Filled Poly(Butylene Succinate-co-Adipate) Nanocomposites for Electromagnetic Applications
Comparison of Carbon-Nanoparticle-Filled Poly(Butylene Succinate-co-Adipate) Nanocomposites for Electromagnetic Applications Open
Electrostatic dissipative (ESD), anti-static (AS), and electromagnetic interference (EMI) shielding materials are commonly based on commodity fossil-fuel-based plastics. This, in turn, contributes to ever-growing non-biodegradable plastic …
View article: Lamination of Cast Hemp Paper with Bio-Based Plastics for Sustainable Packaging: Structure-Thermomechanical Properties Relationship and Biodegradation Studies
Lamination of Cast Hemp Paper with Bio-Based Plastics for Sustainable Packaging: Structure-Thermomechanical Properties Relationship and Biodegradation Studies Open
Composite laminate recycling and waste disposal routes remain a burden to existing systems, requiring special treatment and separation. The inclusion of a plastic layer is important for several key properties that are required for food saf…
View article: Data on FTIR, photo-DSC and dynamic DSC of triethylene glycol dimethacrylate and N-vinylpyrrolidone copolymerization in the presence of ionic liquids
Data on FTIR, photo-DSC and dynamic DSC of triethylene glycol dimethacrylate and N-vinylpyrrolidone copolymerization in the presence of ionic liquids Open
Here we show the effect of the ionic liquid nature, its content and monomer/crosslinker ratio on the copolymerization of N-vinylpyrrolidone (NVP) with triethylene glycol dimethacrylate (TEGDMA) induced by UV or heat irradiation. For the fi…
View article: Sustainable Wax Coatings Made from Pine Needle Extraction Waste for Nanopaper Hydrophobization
Sustainable Wax Coatings Made from Pine Needle Extraction Waste for Nanopaper Hydrophobization Open
We combine renewable and waste materials to produce hydrophobic membranes in the present work. Cellulose nanopaper prepared from paper waste was used as a structural component for the membrane. The pine wax was reclaimed from pine needle e…
View article: Biobased Resin for Sustainable Stereolithography: 3D Printed Vegetable Oil Acrylate Reinforced with Ultra-Low Content of Nanocellulose for Fossil Resin Substitution
Biobased Resin for Sustainable Stereolithography: 3D Printed Vegetable Oil Acrylate Reinforced with Ultra-Low Content of Nanocellulose for Fossil Resin Substitution Open
The use of biobased materials in additive manufacturing is a promising long-term strategy for advancing the polymer industry toward a circular economy and reducing the environmental impact. In commercial 3D printing formulations, there is …
View article: Clean manufacturing of cellulose nanopapers by incorporating lignin and xylan as sustainable additives
Clean manufacturing of cellulose nanopapers by incorporating lignin and xylan as sustainable additives Open
In this work, we report for the first time the clean manufacturing of cellulose nanopapers by a green path of mixing nanocellulose suspension in water with lignin and xylan. The procedure involves grinding the old wastepaper, microfluidizi…
View article: Hydrothermal Ageing Effect on Reinforcement Efficiency of Nanofibrillated Cellulose/Biobased Poly(butylene succinate) Composites
Hydrothermal Ageing Effect on Reinforcement Efficiency of Nanofibrillated Cellulose/Biobased Poly(butylene succinate) Composites Open
Nanofibrillated cellulose (NFC) is a sustainable functional nanomaterial known for its high strength, stiffness, and biocompatibility. It has become a key building block for the next-generation of lightweight, advanced materials for applic…
View article: Lignin and Xylan as Interface Engineering Additives for Improved Environmental Durability of Sustainable Cellulose Nanopapers
Lignin and Xylan as Interface Engineering Additives for Improved Environmental Durability of Sustainable Cellulose Nanopapers Open
Cellulose materials and products are frequently affected by environmental factors such as light, temperature, and humidity. Simulated UV irradiation, heat, and moisture exposure were comprehensively used to characterize changes in cellulos…
View article: Durability of Biodegradable Polymer Nanocomposites
Durability of Biodegradable Polymer Nanocomposites Open
Biodegradable polymers (BP) are often regarded as the materials of the future, which address the rising environmental concerns. The advancement of biorefineries and sustainable technologies has yielded various BP with excellent properties …
View article: Cellulose Nanocrystals vs. Cellulose Nanofibers: A Comparative Study of Reinforcing Effects in UV-Cured Vegetable Oil Nanocomposites
Cellulose Nanocrystals vs. Cellulose Nanofibers: A Comparative Study of Reinforcing Effects in UV-Cured Vegetable Oil Nanocomposites Open
There is an opportunity to use nanocellulose as an efficient renewable reinforcing filler for polymer composites. There have been many investigations to prove the reinforcement concept of different nanocellulose sources for thermoplastic a…
View article: Hydrothermal Degradation of Biobased Poly(butylene succinate)/Nanofibrillated Cellulose Composites
Hydrothermal Degradation of Biobased Poly(butylene succinate)/Nanofibrillated Cellulose Composites Open
Biobased polymers and composites have gained increased global attention due to their abundance, renewability, and biodegradability. Natural fillers such as cellulose-based fillers improve the mechanical properties of biopolymers, extending…