Péter Jánoš Szabó
YOU?
Author Swipe
View article: Correlation between the developed layer's color and crystallographic orientation of pure copper during long-term color etching with Beraha˗I
Correlation between the developed layer's color and crystallographic orientation of pure copper during long-term color etching with Beraha˗I Open
In situ optical microscopy investigation was performed on a Cu99.9 copper sample during color etching with Beraha˗I etchant for approximately 48 min in a microfluidic cell. The color change of the individual grains was analyzed by measurin…
View article: Deformation Induced Lattice Misorientation in Lath Martensite
Deformation Induced Lattice Misorientation in Lath Martensite Open
Effect of plastic deformation on the lattice misorientation in lath martensite was investigated by Electron Backscatter Diffraction (EBSD). As-quenched rod-like specimens were plastically deformed until 9000 N, 14000 N, 19000 N and 21000 N…
View article: Magnetic and Thermoelectric Detection of Sigma Phase in 2507 Duplex Stainless Steel
Magnetic and Thermoelectric Detection of Sigma Phase in 2507 Duplex Stainless Steel Open
Duplex stainless steel has significantly broadened the range of applications of stainless steel. They have a dual-phase microstructure containing ferrite and austenite at approximately a 50–50% phase ratio. Their corrosion resistance is mu…
View article: Investigation of the Effect of Over-Etching During Color Etching
Investigation of the Effect of Over-Etching During Color Etching Open
During color etching, the examined grain structure undergoes a continuous, cyclic color change. This phenomenon is accompanied by a continuous loss of light intensity reflected from the surface. If the etching process is not stopped in tim…
View article: Inhibition of the urea-urease reaction by the components of the zeolite imidazole frameworks-8 and the formation of urease-zinc-imidazole hybrid compound
Inhibition of the urea-urease reaction by the components of the zeolite imidazole frameworks-8 and the formation of urease-zinc-imidazole hybrid compound Open
In the past decade, much effort has been devoted to using chemical clock-type reactions in material design and driving the self-assembly of various building blocks. Urea-urease enzymatic reaction has chemical pH clock behavior in an unbuff…
View article: Development of Microfluidic Cell for Liquid Phase Layer Deposition Tracking
Development of Microfluidic Cell for Liquid Phase Layer Deposition Tracking Open
This paper shows how microfluidic tools can be used for up-to-date microstructural investigations based on thin film deposition. The construction and production methods of such measuring procedures are introduced, and their application in …
View article: Investigation of Composite Behaviour of Lath Martensite
Investigation of Composite Behaviour of Lath Martensite Open
It is very important for our research that we are able to examine the orientation of packets and their relationship to directions of stress that cause plastic deformation. We use electron backscatter diffraction (EBSD) to achieve this. EBS…
View article: Effect of Beracha-I type color etchant on the ferrite phase in different type Fe-C alloys
Effect of Beracha-I type color etchant on the ferrite phase in different type Fe-C alloys Open
In material science, and particularly in metallography, various etching processes are frequently used to visualize grain structure. For some etching processes, it is sufficient to immerse the specimen into the etchant only for a few second…
View article: Deformation Induced Soft and Hard Lath Packets Enhance Ductility in Martensitic Steels
Deformation Induced Soft and Hard Lath Packets Enhance Ductility in Martensitic Steels Open
Martensitic steels are widely used structural materials with outstanding mechanical properties. Their high strength is provided by the non-diffusional phase transformation of fcc γ into thin lamellar bcc plates during fast cooling. Coheren…
View article: EBSD Examination of Argon Ion Bombarded Ti-6Al-4V Samples Produced with DMLS Technology
EBSD Examination of Argon Ion Bombarded Ti-6Al-4V Samples Produced with DMLS Technology Open
Additive manufacturing (AM) indicated great technological increase in the last years. Primarily development of new methods, new computer softwares and more useable materials are responsible for this progression. AM has numerous advantages …