Ruiliang Liu
YOU?
Author Swipe
View article: Provenance Analysis of Archaeological Artifacts via Multimodal RAG Systems
Provenance Analysis of Archaeological Artifacts via Multimodal RAG Systems Open
In this work, we present a retrieval-augmented generation (RAG)-based system for provenance analysis of archaeological artifacts, designed to support expert reasoning by integrating multimodal retrieval and large vision-language models (VL…
View article: Iron-Based High-Temperature Alloys: Alloying Strategies and New Opportunities
Iron-Based High-Temperature Alloys: Alloying Strategies and New Opportunities Open
Iron-based high-temperature alloys are engineered to withstand extreme conditions, including elevated temperatures, mechanical stress, and corrosive environments. These alloys play a critical role in industries such as aerospace, power gen…
View article: Simulation of the Design Performance of Carbon Fiber/Glass Fiber Hybrid-Reinforced Resin Matrix Composite Rotors
Simulation of the Design Performance of Carbon Fiber/Glass Fiber Hybrid-Reinforced Resin Matrix Composite Rotors Open
Composite rotors, attributing to their leveraging characteristics of the light weight, high strength, high rigidity, corrosion resistance, and low noise, can significantly reduce the moment of inertia and enhance equipment operational effi…
View article: Localised control of phase formation in a high-carbon low alloy steel by laser powder bed fusion
Localised control of phase formation in a high-carbon low alloy steel by laser powder bed fusion Open
View article: Luminophore-Free Cathodic Electrochemiluminescent Recognition of Norfloxacin on Imprinted Polypyrrole Surface
Luminophore-Free Cathodic Electrochemiluminescent Recognition of Norfloxacin on Imprinted Polypyrrole Surface Open
View article: Effect of build orientation and heat treatment on the microstructure, mechanical and corrosion performance of super duplex stainless steels fabricated <i>via</i> laser powder bed fusion
Effect of build orientation and heat treatment on the microstructure, mechanical and corrosion performance of super duplex stainless steels fabricated <i>via</i> laser powder bed fusion Open
Build orientation in PBF-L manipulates microstructures, thus tuning the mechanical and corrosion properties of duplex stainless steel before and after heat treatment.
View article: Localised Control of Phase Formation in a High-Carbon Low Alloy Steel by Laser Powder Bed Fusion
Localised Control of Phase Formation in a High-Carbon Low Alloy Steel by Laser Powder Bed Fusion Open
View article: Effect of build orientation and heat treatment on the microstructure, mechanical and corrosion performance of super duplex stainless steels fabricated <i>via</i> laser powder bed fusion
Effect of build orientation and heat treatment on the microstructure, mechanical and corrosion performance of super duplex stainless steels fabricated <i>via</i> laser powder bed fusion Open
Correction for ‘Effect of build orientation and heat treatment on the microstructure, mechanical and corrosion performance of super duplex stainless steels fabricated via laser powder bed fusion’ by Karl Peter Davidson et al. , Mater. Adv.…
View article: Localised Control of Phase Formation in a Carbon Bearing Steel by Laser Powder Bed Fusion
Localised Control of Phase Formation in a Carbon Bearing Steel by Laser Powder Bed Fusion Open
View article: Influence of Grain Size and Crystallographic Orientation on Microbially Induced Corrosion of Low-Carbon Steel in Artificial Seawater
Influence of Grain Size and Crystallographic Orientation on Microbially Induced Corrosion of Low-Carbon Steel in Artificial Seawater Open
View article: Influence of Grain Size and Crystallographic Orientation on Microbially Induced Corrosion of Low-Carbon Steel in Artificial Seawater
Influence of Grain Size and Crystallographic Orientation on Microbially Induced Corrosion of Low-Carbon Steel in Artificial Seawater Open
View article: Effects of Initial Microstructure on the Low-Temperature Plasma Nitriding of Ferritic Stainless Steel
Effects of Initial Microstructure on the Low-Temperature Plasma Nitriding of Ferritic Stainless Steel Open
AISI 430 ferritic stainless steel with different initial microstructures was low-temperature plasma nitrided to improve its hardness and wear resistance in the present investigation. The microstructure and properties of the low-temperature…
View article: In-situ AFM and quasi-in-situ studies for localized corrosion in Mg-9Al-1Fe-(Gd) alloys under 3.5 wt.% NaCl environment
In-situ AFM and quasi-in-situ studies for localized corrosion in Mg-9Al-1Fe-(Gd) alloys under 3.5 wt.% NaCl environment Open
Revealing the localized corrosion process of Mg alloy is considered as one of the most significant ways for improving its corrosion resistance. The reliable monitor should be high distinguishability and real-time in liquid environment. Her…
View article: Protocol to predict mechanical properties of multi-element ceramics using machine learning
Protocol to predict mechanical properties of multi-element ceramics using machine learning Open
View article: Performance of Polymer Electrolyte Fuel Cell Under Wet/Dry Conditions with Hydrophilic and Hydrophobic Electrospun Microporous Layers
Performance of Polymer Electrolyte Fuel Cell Under Wet/Dry Conditions with Hydrophilic and Hydrophobic Electrospun Microporous Layers Open
View article: A hybrid directed energy deposition process to manipulate microstructure and properties of austenitic stainless steel
A hybrid directed energy deposition process to manipulate microstructure and properties of austenitic stainless steel Open
Owing to the relatively lower dimensional accuracy and poorer surface finish compared to other additive manufacturing (AM) technologies, directed energy deposition (DED) yields parts that often require extensive post-processing. Thus, it i…
View article: Designing high-entropy ceramics via incorporation of the bond-mechanical behavior correlation with the machine-learning methodology
Designing high-entropy ceramics via incorporation of the bond-mechanical behavior correlation with the machine-learning methodology Open
Although high-entropy ceramics (HECs) are greatly attractive because of their superior properties over conventional ceramics, there is a lack of reliable and effective design guidelines for producing HECs with the wished-for mechanical pro…
View article: Real-time dissolution of a compositionally complex alloy using inline ICP and correlation with XPS
Real-time dissolution of a compositionally complex alloy using inline ICP and correlation with XPS Open
View article: Investigating the real-time dissolution of a compositionally complex alloy using inline ICP and correlation with XPS
Investigating the real-time dissolution of a compositionally complex alloy using inline ICP and correlation with XPS Open
The real-time dissolution of the single-phase compositionally complex alloy (CCA), Al1.5TiVCr, was studied using an inline inductively coupled plasma method. Compositionally complex alloys (CCAs), a term encompassing high entropy alloys (H…
View article: Improving in vitro and in vivo antibacterial functionality of Mg alloys through micro-alloying with Sr and Ga
Improving in vitro and in vivo antibacterial functionality of Mg alloys through micro-alloying with Sr and Ga Open
View article: Characteristics of AISI 420 Stainless Steel Modified by Low-Temperature Plasma Carburizing with Gaseous Acetone
Characteristics of AISI 420 Stainless Steel Modified by Low-Temperature Plasma Carburizing with Gaseous Acetone Open
In this research work, low-temperature carburizing of AISI 420 martensitic stainless steel was conducted at 460 °C for different amounts of time using an acetone source. The microstructure and phase structure of the carburized layers were …
View article: Simultaneously improving the corrosion resistance and strength of magnesium via low levels of Zn and Ge additions
Simultaneously improving the corrosion resistance and strength of magnesium via low levels of Zn and Ge additions Open
View article: On the development of corrosion resistant Mg alloys via cathodic poisoning
On the development of corrosion resistant Mg alloys via cathodic poisoning Open
Magnesium alloys are attractive engineering materials for light weighting demands. However, high corrosion rate has greatly restricted the wider application of Mg alloys. The work in this project focused on the influence of micro-additions…
View article: Fabrication of continuous slim aluminum fibers using a multi-tooth tool
Fabrication of continuous slim aluminum fibers using a multi-tooth tool Open
In this paper, we describe the development of a multi-tooth tool to fabricate continuous, slim aluminum fibers of an equivalent diameter of under 100 µm. Following an analysis of the process of the fabrication of aluminum fibers, we design…
View article: Fabrication of Continuous Slim Aluminum Fibers Using a Multi-tooth Tool
Fabrication of Continuous Slim Aluminum Fibers Using a Multi-tooth Tool Open
In this paper, we describe the development of a multi-tooth tool to fabricate continuous, slim aluminum fibers of an equivalent diameter of under 100 µm. Following an analysis of the process of the fabrication of aluminum fibers, we design…