S. Yazdani
YOU?
Author Swipe
View article: In situ dissolution–reprecipitation of TiC in SLM-fabricated functionally graded 316L/TiC composites: microstructural evidence and strengthening mechanisms
In situ dissolution–reprecipitation of TiC in SLM-fabricated functionally graded 316L/TiC composites: microstructural evidence and strengthening mechanisms Open
This study provides the first direct multimodal evidence of dissolution and reprecipitation of TiC during selective laser melting (SLM) of 316L/TiC composites. Functionally graded samples were fabricated with a three-layer architecture: pu…
View article: Design and high strain rate response of a nanostructured bainitic steel for enhanced austenite stability
Design and high strain rate response of a nanostructured bainitic steel for enhanced austenite stability Open
View article: Correlation between synthesis conditions and corrosion behavior of nickel–aluminum layered double hydroxide (LDH)-sealed anodized aluminum
Correlation between synthesis conditions and corrosion behavior of nickel–aluminum layered double hydroxide (LDH)-sealed anodized aluminum Open
AA2024 is widely employed within the aerospace sector; nevertheless, its susceptibility to pitting upon exposure to chloride ions presents a notable challenge. This investigation proposes an in-situ co-precipitation technique for effective…
View article: Erratum to: Evolution of microstructure and mechanical properties in multi-layer 316L-TiC composite fabricated by selective laser melting additive manufacturing
Erratum to: Evolution of microstructure and mechanical properties in multi-layer 316L-TiC composite fabricated by selective laser melting additive manufacturing Open
View article: Microstructural evolution and mechanical performance of friction stir spot welded ultrafine carbide-free bainitic steel: Role of dwell time
Microstructural evolution and mechanical performance of friction stir spot welded ultrafine carbide-free bainitic steel: Role of dwell time Open
This study focuses on unraveling the role of dwell time on microstructural evolution, mechanical performance, and failure characteristics of friction stir spot welded ultrafine carbide-free bainitic steel. Results clarify that the microstr…
View article: Fracture and Wear Behavior of Functionally Graded 316L–TiC Composite Fabricated by Selective Laser Melting Additive Manufacturing
Fracture and Wear Behavior of Functionally Graded 316L–TiC Composite Fabricated by Selective Laser Melting Additive Manufacturing Open
Herein, the tribological and fracture behavior of multilayer 316L–TiC composites produced by the selective laser melting additive manufacturing process is investigated. The results show a robust interface between the layers and no cracks a…
View article: Challenges of Artificial Intelligence and the Foundations of Its Civil Liability in Jurisprudence
Challenges of Artificial Intelligence and the Foundations of Its Civil Liability in Jurisprudence Open
A thorough examination of the developments and the discovery of solutions to control, guide, and mitigate the risks associated with the advancement of artificial intelligence (AI) is of paramount importance. The purpose of the author's res…
View article: The Evaluation of Quenching Temperature Effect on Microstructural and Mechanical Properties of Advanced High Strength Low Carbon Steel After Quenching Partitioning Treatment
The Evaluation of Quenching Temperature Effect on Microstructural and Mechanical Properties of Advanced High Strength Low Carbon Steel After Quenching Partitioning Treatment Open
The influence of quenching temperature on microstructural and mechanical properties of low alloy steel of the following chemical composition: 0.26 C, 1.70 Mn, 1.42 Si, 1.10 Cr, 1.10 Ni, 0.94 Cu, 0.24 Mo, 0.1 V, Bal. Fe (Wt.%) was investiga…
View article: Isothermal oxidation kinetics of laser cladded NiCoCrAl/WC + La2O3 hybrid composite coatings at 700 °C
Isothermal oxidation kinetics of laser cladded NiCoCrAl/WC + La2O3 hybrid composite coatings at 700 °C Open
View article: Microstructural and mechanical properties of low-carbon ultra-fine bainitic steel produced by multi-step austempering process
Microstructural and mechanical properties of low-carbon ultra-fine bainitic steel produced by multi-step austempering process Open
View article: Effect of Electro Slag Remelting (ESR) on the microstructure and mechanical properties of low carbon bainitic steel
Effect of Electro Slag Remelting (ESR) on the microstructure and mechanical properties of low carbon bainitic steel Open
It is essential to produce steels free from impurities and inclusions and decrease the segregations as much as possible knowing that the quality of the primary cast steel is a very critical factor influencing its final microstructure and m…
View article: The influence of chill thickness and austempering temperature on dry sliding wear behaviour of a Cu-Ni carbidic austempered ductile iron (CADI)
The influence of chill thickness and austempering temperature on dry sliding wear behaviour of a Cu-Ni carbidic austempered ductile iron (CADI) Open
The influence of chill thickness and applied load were studied on wear behaviour of a carbidic austempered ductile iron containing Cu and Ni.Ductile iron with chemical composition Fe-3.6C-2.6Si-0.53Cu-0.51Ni(in wt.%) was cast into standard…
View article: Dry sliding wear of Ni alloyed austempered ductile iron
Dry sliding wear of Ni alloyed austempered ductile iron Open
Measurements of dry sliding wear are presented for ductile irons with composition Fe-3.56C-2.67Si-0.25Mo-0.5Cu and Ni contents of 0.8 and 1.5 in wt.% with applied loads of 50, 100 and 150 N for austempering temperatures of 270, 320, and 37…
View article: Effect of nodule count and austempering heat treatment on segregation behavior of alloying elements in ductile cast iron
Effect of nodule count and austempering heat treatment on segregation behavior of alloying elements in ductile cast iron Open
The equilibrium partition ratio, k, has been measured for Mn, Mo, Si, Ni and Cu in a ductile iron with composition (wt.%): 3.45C, 0.25Mn, 0.25Mo, 2.45Si, 0.5Ni and 0.5Cu with different nodule counts obtained from different section sizes of…
View article: VALIDATION OF HASBLED SCORE IN PREDICTION OF HEMORRHAGIC COMPLICATIONS IN PATIENTS WITH BRAIN ISCHEMIA AND ATRIAL FIBRILLATION UNDER WARFARIN THERAPY
VALIDATION OF HASBLED SCORE IN PREDICTION OF HEMORRHAGIC COMPLICATIONS IN PATIENTS WITH BRAIN ISCHEMIA AND ATRIAL FIBRILLATION UNDER WARFARIN THERAPY Open