Saulo Geraldeli
YOU?
Author Swipe
View article: The role of protective liners and glass ionomer in managing pulp temperature during light curing
The role of protective liners and glass ionomer in managing pulp temperature during light curing Open
The materials tested provided improper thermal insulation (Δ > 5.5 ºC). Thus, prolonged or multiple light-curing exposures can be harmful to the pulp tissues. Therefore, for indirect pulpal capping procedures, self-cured materials or a red…
View article: Tunable Release of Calcium from Chitosan-Coated Bioglass
Tunable Release of Calcium from Chitosan-Coated Bioglass Open
Bioglass presents a standard biomaterial for regeneration of hard tissues in orthopedics and dentistry. The notable osteo-inductive properties of bioglass are largely due to the release of calcium ions from it. However, this release is not…
View article: Surface Analysis of a Universal Resin Composite and Effect of Preheating on its Physicochemical Properties
Surface Analysis of a Universal Resin Composite and Effect of Preheating on its Physicochemical Properties Open
This study was aimed at analyzing the surface properties of a universal resin composite and evaluating the effect of preheating on its physicochemical properties. Two commercial resin composites were used under two conditions: Filtek Unive…
View article: Effect of elastomeric urethane monomer on physicochemical properties and shrinkage stress of resin composites
Effect of elastomeric urethane monomer on physicochemical properties and shrinkage stress of resin composites Open
This study aimed to evaluate the effect of an elastomeric urethane monomer (Exothane-24) in different concentrations on physicochemical properties, gap formation, and polymerization shrinkage stress of experimental resin composites. All ex…
View article: Patients´ satisfaction concerning direct anterior dental restoration
Patients´ satisfaction concerning direct anterior dental restoration Open
The objective of this study was to observe patients’ satisfaction with their in-service direct anterior dental restorations and to compare it with clinical evaluation using FDI (Federation Dental International) criteria. Patients scored th…
View article: Patients´ satisfaction concerning direct anterior dental restoration
Patients´ satisfaction concerning direct anterior dental restoration Open
The objective of this study was to observe patients’ satisfaction with their in-service direct anterior dental restorations and to compare it with clinical evaluation using FDI (Federation Dental International) criteria. Patients scored th…
View article: Effect of a polymerization inhibitor on the chemomechanical properties and consistency of experimental resin composites
Effect of a polymerization inhibitor on the chemomechanical properties and consistency of experimental resin composites Open
This study investigated the effect of butylated hydroxytoluene (BHT) inhibitor on degree of conversion (DC), flexural strength (FS), flexural modulus (FM), Knoop microhardness (KH), microhardness reduction (HR), and consistency of experime…
View article: Effect of Incorporation of Bioactive Glass-Ceramic into Self-etch Adhesives.
Effect of Incorporation of Bioactive Glass-Ceramic into Self-etch Adhesives. Open
The incorporation of biosilicate microparticles can improve the properties of self-etch adhesives. It increased the DC of the experimental adhesive as well as mineral deposition. However, the adhesive properties are concentration dependent…
View article: Incorporation of Arginine to Commercial Orthodontic Light-Cured Resin Cements—Physical, Adhesive, and Antibacterial Properties
Incorporation of Arginine to Commercial Orthodontic Light-Cured Resin Cements—Physical, Adhesive, and Antibacterial Properties Open
(1) Background: The amino acid arginine is now receiving great attention due to its potential anti-caries benefits. The purpose of this in vitro study was to evaluate the shear bond strength (SBS), ultimate tensile strength (UTS), and anti…
View article: Chlorhexidine-modified nanotubes and their effects on the polymerization and bonding performance of a dental adhesive
Chlorhexidine-modified nanotubes and their effects on the polymerization and bonding performance of a dental adhesive Open
View article: Bonding performance and mechanical properties of flowable bulk-fill and traditional composites in high c-factor cavity models
Bonding performance and mechanical properties of flowable bulk-fill and traditional composites in high c-factor cavity models Open
Flowable bulk-fill composites, except XBF, showed higher BS, lower SS, similar FS, and lower E when compared to conventional ones.
View article: Efeito da adição de arginina na adesão e atividade antimicrobiana de cimentos resinosos para fixação de bráquetes
Efeito da adição de arginina na adesão e atividade antimicrobiana de cimentos resinosos para fixação de bráquetes Open
O objetivo no presente estudo foi avaliar a resistência de união ao cisalhamento (RU) e o potencial antimicrobiano de dois cimentos resinosos ortodônticos dopados com arginina. Para isso, 40 incisivos inferiores bovinos foram separados em …
View article: Influence of Pre-Heating Regular Resin Composites and Flowable Composites on Luting Ceramic Veneers with Different Thicknesses
Influence of Pre-Heating Regular Resin Composites and Flowable Composites on Luting Ceramic Veneers with Different Thicknesses Open
The aim of this study was to evaluate of pre-heating, filler contents and ceramic thickness on film thickness, microshear bond strength, degree of conversion and color change on ceramic veneers. Two experimental composites were prepared (B…
View article: Influence of Pre-Heating Regular Resin Composites and Flowable Composites on Luting Ceramic Veneers with Different Thicknesses
Influence of Pre-Heating Regular Resin Composites and Flowable Composites on Luting Ceramic Veneers with Different Thicknesses Open
The aim of this study was to evaluate of pre-heating, filler contents and ceramic thickness on film thickness, microshear bond strength, degree of conversion and color change on ceramic veneers. Two experimental composites were prepared (B…
View article: Quantitative image of fluorescence of ceramic and resin-cement veneers
Quantitative image of fluorescence of ceramic and resin-cement veneers Open
The main of the study was quantify the effect of two ceramics with two underlying resin cements on apparent fluorescence levels. Buccal surfaces of two bovine incisors were ground flat producing one enamel and one dentin substrate. The ven…
View article: Quantitative image of fluorescence of ceramic and resin-cement veneers
Quantitative image of fluorescence of ceramic and resin-cement veneers Open
The main of the study was quantify the effect of two ceramics with two underlying resin cements on apparent fluorescence levels. Buccal surfaces of two bovine incisors were ground flat producing one enamel and one dentin substrate. The ven…
View article: Effect of Thickness of Ceramic Veneers on Color Stability and Bond Strength of Resin Luting Cements Containing Alternative Photoinitiators.
Effect of Thickness of Ceramic Veneers on Color Stability and Bond Strength of Resin Luting Cements Containing Alternative Photoinitiators. Open
Amine-free cements containing Ivocerin and TPO seem to be a better alternative to CQ-amine cements, while not reducing either DC or dentin µSBS of amine-free cements. However, CQ-amine and amine-free cements still seem to change color over…
View article: Physicochemical and biological properties of novel chlorhexidine‐loaded nanotube‐modified dentin adhesive
Physicochemical and biological properties of novel chlorhexidine‐loaded nanotube‐modified dentin adhesive Open
A commercially available three‐step (etch‐and‐rinse) adhesive was modified by adding chlorhexidine (CHX)‐loaded nanotubes (Halloysite®, HNT) at two concentrations (CHX10% and CHX20%). The experimental groups were: SBMP (unmodified adhesive…
View article: Avaliação da União à Dentina de Sistemas Adesivos Experimentais Multi-Modo Contendo Análogos Biomiméticos e Fosfatos de Cálcio Bioativos
Avaliação da União à Dentina de Sistemas Adesivos Experimentais Multi-Modo Contendo Análogos Biomiméticos e Fosfatos de Cálcio Bioativos Open
O objetivo foi avaliar a resistência de união (µTBS) e nanoinfiltração (NI) de um sistema adesivo experimental multi-modo contendo análogos biomiméticos e fosfatos de cálcio bioativos. Foram utilizados 60 terceiros molares humanos. A compo…
View article: Influence of Different Concentration and Ratio of a Photoinitiator System on the Properties of Experimental Resin Composites
Influence of Different Concentration and Ratio of a Photoinitiator System on the Properties of Experimental Resin Composites Open
The aim in this study was to evaluate the influence of different ratio of camphorquinone/tertiary amine concentration on the flexural strength (FS), elastic modulus (EM), degree of conversion (DC), yellowing (YL), water sorption (WS) and w…
View article: Bond strength of adhesive systems to sound and demineralized dentin treated with bioactive glass ceramic suspension
Bond strength of adhesive systems to sound and demineralized dentin treated with bioactive glass ceramic suspension Open
View article: Doxycycline-loaded nanotube-modified adhesives inhibit MMP in a dose-dependent fashion
Doxycycline-loaded nanotube-modified adhesives inhibit MMP in a dose-dependent fashion Open
View article: Microtensile Bond Strength of Adhesive Systems in Different Dentin Regions on a Class II Cavity Configuration
Microtensile Bond Strength of Adhesive Systems in Different Dentin Regions on a Class II Cavity Configuration Open
The aim of this study was to evaluate microtensile bond strength (µTBS) of self-etch and etch-and-rinse adhesives systems compared in different dentin regions (central-CD or proximal-PD) in a class II cavity configuration. A class II (mesi…
View article: A new arginine-based dental adhesive system: formulation, mechanical and anti-caries properties
A new arginine-based dental adhesive system: formulation, mechanical and anti-caries properties Open
View article: Microtensile Bond Strength of Adhesive Systems in Different Dentin Regions on a Class II Cavity Configuration
Microtensile Bond Strength of Adhesive Systems in Different Dentin Regions on a Class II Cavity Configuration Open
The aim of this study was to evaluate microtensile bond strength (µTBS) of self-etch and etch-and-rinse adhesives systems compared in different dentin regions (central-CD or proximal-PD) in a class II cavity configuration. A class II (mesi…
View article: Abfraction lesions: etiology, diagnosis, and treatment options
Abfraction lesions: etiology, diagnosis, and treatment options Open
Abfraction is a type of noncarious cervical lesion (NCCL) characterized by loss of tooth tissues with different clinical appearances. Evidence supports that abfraction lesions, as any NCCLs, have a multifactorial etiology. Particularly, th…