Explanipedia

Effect of GGBFS on the Compressive Strength of Geopolymers Binders Open

Naaem M. Al-Hantoosh, Harith Abdullah Ali, Shukur Abu Hassan, Wisam Dheyab · 2024

Hybridizing Kenaf and Glass Fibres as Reinforcement in ABS Composites: Current Trends, Properties and Potential Application in Aircraft Radome Open

Muhamad Fauzi Muhammad Fitri, M. R. M. Asyraf, Shukur Abu Hassan · 2024

The advancement of thermoplastic composites reinforced with hybrid kenaf/glass fibres has rapidly progressed, positioning them as viable structural materials for diverse industries. The incorporation of hybrid kenaf/ glass fibres in these …

Analysis of load and contact mechanic on the composite structural: case study on GFRP composite Open

Mujiyono Mujiyono, Helmi Kusuma Perdana, Didik Nurhadiyanto, Virda Hersy Lutviana Saputri, Shukur Abu Hassan · 2024

When creating lightweight structures to lower the rail vehicle's overall weight, composite materials with fiber reinforcements are the material of choice. Because of its excellent strength, low weight, high durability, stiffness, damping a…

Feasibility study on thermo‐mechanical performance of <span>3D</span> printed and annealed coir fiber powder/polylactic acid eco‐friendly biocomposites Open

Bright Brailson Mansingh, Joseph Selvi Binoj, Shukur Abu Hassan, Eugene Wong, Heru Suryanto , et al. · 2024

The enhancement of the mechanical and thermal characteristics of 3D printed polylactic acid (PLA) composites reinforced by coir fiber powder (CFP) has been investigated by varying the weight percentage (wt%) of the reinforcement and anneal…

Effect of Hybrid FRP Confinement on Tin Slag Polymer Concrete Compressive Strength Open

Muhamad Soffi Manda, M. R. M. Rejab, Shukur Abu Hassan, Mat Uzir Wahit · 2023

This study investigates the strength enhancement of Tin Slag Polymer Concrete (TSPC) under hybrid GFRP and CFRP confinement in comparison with mono GFRP and CFRP confinement on TSPC circular short column samples. Hybrid FRP confinement is …

Damage characterisation of amine-functionalized MWCNT reinforced carbon/epoxy composites under indentation loading Open

Usaid Ahmed Shakil, M. R. M. Rejab, Norazlianie Sazali, Shukur Abu Hassan, Mohd Yazid Yahya , et al. · 2023

Damage resistance of carbon fibre reinforced composites is crucial parameter to be considered at both primary selection and in-service maintenance stages. High stiffness of carbon-epoxy system and stacked configuration make it susceptible …

Damage formations of ramie fiber composites multilayer armour system under high-velocity impacts Open

Mujiyono Mujiyono, Didik Nurhadiyanto, Alaya Fadllu Hadi Mukhammad, Tri Widodo Besar Riyadi, Kristanto Wahyudi , et al. · 2023

Multilayer armour system (MAS) becomes the best choice in reinforcing protection for military officers against projectile attack which has a high velocity of up to 7.62×51 mm NATO ball lead core (projectile level III NIJ standard) or AP 7.…

Experimental Study on Tin Slag Polymer Concrete Strengthening under Compression with Metallic Material Confinement Open

Muhamad Soffi Manda, M. R. M. Rejab, Shukur Abu Hassan, Mat Uzir Wahit, Didik Nurhadiyanto · 2023

Studies on the external strengthening of tin slag polymer concrete by fibre-reinforced plastic confinement have provided strength enhancement of tin slag polymer concrete up to 128% with carbon fibre-reinforced plastic confinement. However…

Characterization and Performance of Additive Manufactured Novel bio-waste Polylactic acid eco-friendly Composites Open

Bright Brailson Mansingh, Joseph Selvi Binoj, Ze Quan Tan, Eugene Wong, Taweechai Amornsakchai , et al. · 2023

A Study on the Application of Solar Cells Sensitized With a Blackberry‐Based Natural Dye for Power Generation Open

Alamry Ali, Shukur Abu Hassan, Amal BaQais, Joseph Selvi Binoj · 2022

This research paper is aimed at evaluating the use of natural dyes from blackberry ( Rubus glaucus ) obtained naturally for their subsequent application in laboratory solar cells to place them in dye‐sensitized solar cells (DSSC) for the g…

Applications of Mobile Information Processor Edge‐Over‐Edge Molecular Wires with High‐Performance Thermoelectric Generators Open

Joseph Selvi Binoj, Shukur Abu Hassan, Reefat Arefin Khan, Alamry Ali · 2022

If high‐efficiency organic isotherm models for mobile processors can be found, a variety of energy harvesting devices, such as Peltier coolers composed of flexible and transparent thin‐film materials, might be manufactured. The thermoelect…

Effect of fiber stacking sequence and orientation on quasi- static indentation properties of sustainable hybrid carbon/ramie fiber epoxy composites Open

Shukur Abu Hassan, Joseph Selvi Binoj, Kheng Lim Goh, Bright Brailson Mansingh, K. C. Varaprasad , et al. · 2022

Hybrid polymer composites reinforced with synthetic and natural fibers are gaining more interest in current composite technology in an effort to promote sustainability without sacrificing the performance of synthetic fiber reinforced polym…

Green strength properties of waterjet abrasive waste as potential composition in green mould by Taguchi and ANOVA approach Open

NUR FARAH BAZILAH BINTI WAKHI ANUAR, M.L. Mohd Khusairi, Redhwan M. A. Saad, Shukur Abu Hassan, Zolkarnain Marjom , et al. · 2021

The sand casting process still continues today due to the cost-effectiveness of materials and processes. There is a wide variety of castings related to composition and size, but silica sand is widely available from coastal line mining and …

MECHANICAL CHARACTERISTICS FOR COMPOSITE MATERIALS USING COMMERCIAL EPOXY RESINS AND DIFFERENT FILLERS Open

Omar A. Amin, Shukur Abu Hassan, M. A. Sadek, Mostafa Radwan, Hany A. Elazab · 2021

Epoxy resins are thermoset polymers that consist of epoxide groups in their molecular structure. It shows many attractive characteristics like strong adhesion, excellent mechanical strength, low shrinkage, excellent insulator, excellent ch…

Hybrid and Synthetic FRP Composites under Different Strain Rates: A Review Open

Ali Farokhi Nejad, Mohamad Yusuf Salim, Seyed Saeid Rahimian Koloor, Stanislav Petřík, Mohd Yazid Yahya , et al. · 2021

As a high-demand material, polymer matrix composites are being used in many advanced industrial applications. Due to ecological issues in the past decade, some attention has been paid to the use of natural fibers. However, using only natur…

Properties of Bitumen Modified with Latex Under Short-Term Ageing Open

U Jamaris, Norhidayah Abdul Hassan, Mohd Zul Hanif Mahmud, Che Ros Ismail, Haryati Yaacob , et al. · 2021

Short-term ageing is a common issue in bitumen mixing production, and it severely affects the physical, rheological and chemical properties of the bitumen. Polymer modified bitumen is regarded as a preferable paving material to improve the…

Chemical Surface Modification of Oil Palm Fibre: a Case study of developed Oil Palm Fibre-Plastic Composites Open

Emmanuel Baffour-Awuah, Stephen A. Akinlabi, Tien‐Chien Jen, Imhade P. Okokpujie, Shukur Abu Hassan , et al. · 2021

Application of chemicals to treat the surface of oil palm fibre could have effects on the characteristics of plastics when oil palm fibre and plastic composites are developed. Identification, sampling, and review of literature relating to …

Sustainable development in utilization of Tamarindus indica L. and its by-products in industries: A review Open

Bright Brailson Mansingh, Joseph Selvi Binoj, N. Prem Sai, Shukur Abu Hassan, Suchart Siengchin , et al. · 2021

Dynamic response of aluminium sheet 2024-T3 subjected to close-range shock wave: experimental and numerical studies Open

Amin Bassiri Nia, Ali Farokhi Nejad, Xin Li, Amran Ayob, Mohd Yazid Yahya , et al. · 2020

COMPRESSIVE BEHAVIOUR OF TIN SLAG POLYMER CONCRETE CONFINED WITH CARBON FIBRE REINFORCED EPOXY Open

Shukur Abu Hassan, Umar Abdul Hanan, Mohd Yazid Yahya, Mat Uzir Wahit · 2020

Terak timah adalah hasil sampingan proses peleburan.Tujuan kajian ini adalah untuk mengkaji tingkah laku mampatan kolum konkrit polimer (PC) berisi terak timah yang dibalut dengan polimerdiperkuat fiber karbon (CFRP). Kajian ini dijalankan…

Synthesis of Silver-Coated Bioactive Nanocomposite Scaffolds Based on Grafted Beta-Glucan/Hydroxyapatite via Freeze-Drying Method: Anti-Microbial and Biocompatibility Evaluation for Bone Tissue Engineering Open

Muhammad Umar Aslam Khan, Mesfer A. Al-Thebaiti, Muhammad Uzair Hashmi, Saira Aftab, Saiful Izwan Abd Razak , et al. · 2020

Advancement and development in bone tissue engineering, particularly that of composite scaffolds, are of great importance for bone tissue engineering. We have synthesized polymeric matrix using biopolymer (β-glucan), acrylic acid, and nano…

Preliminary study of fragment simulating projectile on epoxy-ramie composite Open

Alaya Fadllu Hadi Mukhammad, Murni Murni, Mujiyono Mujiyono, Didik Nurhadiyanto, Shukur Abu Hassan , et al. · 2020

This research is a preliminary study to determine the feasibility of the ballistic test equipment using fragment-simulating projectiles (FSP) and the ability of the rami-epoxy composite against bullet penetration. Tests have been conducted…

Reversible moisture damage in asphalt mixture Open

M Arfat, Haryati Yaacob, Norhidayah Abdul Hassan, M N M Warid, M K Idham , et al. · 2019

A moisture damage has been one of the major concerns for HMA pavement by loss of adhesion between bitumen and aggregate surface or loss of the cohesion within asphalt binder due to action of water. Water is the one of major contributor tow…

Modulus Effect on Local Load Distribution for FRP/Steel Bonded Joint Open

Airul Amin Dani, Nor Ashiqeen Jamaluddin, Shukur Abu Hassan, Mohd Yazid Yahya · 2019

Rehabilitation of piping system has been a major concern in the oil and gas industries. Fibre reinforced polymers (FRPs) have been introduced as an alternative approach and increasingly used in repairing oil and gas pipeline. However, perf…

Comparison of tensile properties between natural fibres and inorganic fibres for strengthening timber structures Open

Nor Ashiqeen Jamaluddin, Shujaatullah Sheikh, Umar Abdul Hanan, Nur Izzah Mokhtar, Shukur Abu Hassan , et al. · 2019

Fibre-reinforced polymers (FRPs) have been successfully applied to the strengthening of reinforced concrete structures and a similar methodology is adopted by researchers in order to strengthen timber structures using synthetic fibres such…

Mechanical properties of structural epoxy after sixteen months exposure to outdoor tropical environment Open

Shukur Abu Hassan, Khairunnisa Mohammad Yunus, Umar Abdul Hanan, Mohd Yazid Yahya, Mat Uzir Wahit , et al. · 2018

Durability study in regards of epoxy as adhesive which commonly use in current civil industry are still lacking in order to find easy accessible data base. Having validated data to determine its life span will significantly help. The objec…

GLASS FIBRE REINFORCE POLYMER STRUCTURAL SELECTION AS CONCRETE BEAM REINFORCEMENT Open

Abdul Rahman Mohd Sam, Shukur Abu Hassan, Tan Sim Thye · 2018

Fibre Reinforced Polymer (FRP) made of a combination of continuous fibre embedded in resin matrix is an advanced composite material that has been identified as a potential new construction material. Some of the advantages of FRP are high t…

Mode I and Mode II Delamination of Flax/Epoxy Composite Laminate Open

Thamilarasu S. Rajendran, Mahzan Johar, Shukur Abu Hassan, King Jye Wong · 2018

In recent decades, natural fibres are getting their attention as reinforcement in composite materials. This is because natural fibres are environmental friendly. However, delamination is commonly recognised as one of the earliest failures …

Flexural and interlaminar shear study of hybrid woven kenaf/recycled GFRP (rGFRP) composites subjected to bending load Open

Siti Khalijah Jamal, Shukur Abu Hassan, King Jye Wong, Mohd Yazid Yahya · 2017

Delamination known as the failure at the interface between different layers is one of critical failure mechanism for laminates composites.Hybrid laminate composites comprised of unique ply material and structure, unwanted interlaminar shea…

Mechanical properties of recycled glass fibre reinforced nanoclay/unsaturated polyester composites Open

Umar Abdul Hanan, Shukur Abu Hassan, Mat Uzir Wahit, Rohana Yusof, Balqis Omar , et al. · 2017

The purpose of this study is to study the effects of montmorillonite (MMT) nanofiller on the mechanical properties of glass fibre recyclates (rGF) reinforced unsaturated polyester (UP) composites.Alumina-silicates nanoclay such as MMT can …

Shukur Abu Hassan YOU? Author Swipe