Explanipedia

Molecular Characteristics and Phenotypical Analysis of Carbapenem-Resistant K. Pneumoniae in the Lüliang Region, Shanxi Province Open

Hui‐Yuan Wang, Zhitai Jia, Xiaoyan Li, Hao Yan, Jinjing Zhang , et al. · 2025

This study revealed that the CRKP strains isolated in the Lüliang region of Shanxi Province were strongly resistant and that this resistance was related to virulence characteristics. Therefore, antibiotic management should be streng…

Structurally complex phase engineering enables hydrogen-tolerant Al alloys Open

Shengyu Jiang, Yuantao Xu, Ruihong Wang, Xinren Chen, Chaoshuai Guan , et al. · 2025

Dispersion hardening using amorphous nanoparticles deployed via additive manufacturing Open

Ge Wang, Yin Zhang, Jian Liu, Wen Chen, Kang Wang , et al. · 2025

Nanoparticles or precipitates are long used to block dislocations to strengthen metals. However, this strengthening mechanism unavoidably adds stress concentrations at the obstacles, instigating crack initiation that hampers ductility. Her…

Superior thermal stability in a high-strength Al–Zn–Mg–Cu–Si alloy via tailored precipitation sequence Open

Yuan–Ting Mo, Xiaoyi Xu, Zetian Liu, Haixiao Zhang, Cheng Wang , et al. · 2025

Here, a novel Al–Zn–Mg–Cu–Si alloy is developed, combining a high yield strength of ∼420 MPa with excellent thermal stability. This exceptional performance is achieved through a tailored precipitation sequence enabled by a multi-step aging…

Commercial Orthokeratology Lens Engineered with Multifunctional Coatings for Intelligently Treating Bacterial Infection and Biofouling Open

Xiao Lin, Haochen Liu, Fan Wu, Qinghua Li, Yan Liu , et al. · 2025

Enhanced age-hardening in a lean Mg-Al-Ca-Mn alloy by trace silver addition Open

Zhao-Yuan Meng, Hai-Long Jia, Hong Ju, Shenbao Jin, Kai Guan , et al. · 2024

Promoting the precipitation of Guinier-Preston (G.P.) zones in fast-extruded Mg-Al-Ca-Mn alloys could enhance the age-hardenability, which remains a significant challenge. Herein, we report an unexpected enhancement of age-hardenability in…

Effects of single- and multi-energies ion irradiations on clustering in an Fe–Mn–Ni–Si alloy Open

Yang Kong, Yue Sun, Shenbao Jin, Gang Sha · 2024

The effects of single- and multi-energy self-ion irradiations on clustering in an Fe–Mn–Ni–Si alloy have been carefully investigated using atom probe tomography. The two irradiation approaches produce distinct clustering nanostructures, di…

Strong and thermally stable nanocrystalline Cu–Al alloy via Al segregation Open

Kaixuan Zhou, Luling Wang, Yonghao Zhao, Shenbao Jin, Qingzhong Mao , et al. · 2024

Nanocrystalline (NC) metals and alloys are prone to mechanical and thermal instability under force and thermal fields due to their high Gibbs free energy, which limits their industrial applications. In this work, by employing rotary swagin…

A Novel B2 Precipitate Gives High Strength and High Impact Toughness to Bcc‐Structured Cryogenic Steels Open

Qiyuan Chen, Shuai Tang, Weina Zhang, Haile Yan, Gang Sha , et al. · 2024

For decades, solid solution strengthening with up to 9 wt.% Ni has been the only successful strategy to obtain high strength and high impact toughness in bcc‐structured (ferritic or tempered martensitic) cryogenic steels. Until now coheren…

New Strategy in Light-Weight and Ultrastrong Ti40nb15mo30(Nbc)15 Refractory Complex Concentrated Alloy Open

Lujun Huang, Dong Liu, Cunyu Wang, Qi An, Robert O. Ritchie , et al. · 2024

Revealing the room temperature superplasticity in bulk recrystallized molybdenum Open

Wenshuai Chen, Xiyao Li, Shenbao Jin, Lunwei Yang, Yan Li , et al. · 2023

Body-centered cubic refractory metallic materials exhibit excellent high-temperature strength, but often suffer from brittle intergranular fracture due to the recrystallization-induced enrichment of trace elements at grain boundaries (GBs)…

Hybridisation of microstructures from three classes of titanium alloys Open

Ahmad Zafari, Mogeng Li, Edward W. Lui, Shenbao Jin, Tesfaye Tadesse Molla , et al. · 2023

Synergy of multiple precipitate/matrix interface structures for a heat resistant high-strength Al alloy Open

Qiang Lü, Jianchuan Wang, Hongcheng Li, Shenbao Jin, Gang Sha , et al. · 2023

High strength aluminum alloys are widely used but their strength is reduced as nano-precipitates coarsen rapidly in medium and high temperatures, which greatly limits their application. Single solute segregation layers at precipitate/matri…

Comparative study of Cd addition effects on precipitation in different aluminium alloys Open

Feng Qian, Jinyue Li, Dongdong Zhao, Shenbao Jin, Eva Anne Mørtsell , et al. · 2023

This work demonstrates that Cd microadditions can enhance the precipitation of age-hardening precipitates in 2xxx and 6xxx alloys as well as the dispersoid precipitation in 3xxx alloys, but have a minimal effect on the precipitation in 7xx…

Creep-induced heterogeneous precipitation of Laves phase with two morphologies in tempered martensite ferritic steels Open

Bo Xiao, Haokai Dong, Tao Yang, Shaofei Liu, Shenbao Jin , et al. · 2023

We report two typical morphologies (elongated- and blocky-shaped) of the Laves phase in tempered martensite ferritic steels during creep process, originating from the two independent formation paths, i.e. along grain boundaries (GBs) and n…

Enhanced Age-Hardening of an Al-5mg-2zn-1cu Alloy by Pre-Aging Combined with Pre-Straining Open

Yuqiao Zhao, Min Zha, Hai-Long Jia, Pin-Kui Ma, Shenbao Jin , et al. · 2023

Enhanced strength and ductility of metal composites with intragranularly dispersed reinforcements by additive manufacturing Open

Bingkun Zou, Lei Wang, Yanming Zhang, Yang Liu, Qiubao Ouyang , et al. · 2022

Reinforcements in metal composites are usually dispersed at grain boundaries. We here show that the rapid solidification during laser additive manufacturing enables the spontaneous engulfment of reinforcing particles inside aluminum grains…

A nanodispersion-in-nanograins strategy for ultra-strong, ductile and stable metal nanocomposites Open

Zan Li, Yin Zhang, Zhibo Zhang, Yi‐Tao Cui, Qiang Guo , et al. · 2022

Nanograined metals have the merit of high strength, but usually suffer from low work hardening capacity and poor thermal stability, causing premature failure and limiting their practical utilities. Here we report a “nanodispersion-in-nanog…

Designing against phase and property heterogeneities in additively manufactured titanium alloys Open

Jingqi Zhang, Yingang Liu, Gang Sha, Shenbao Jin, Ziyong Hou , et al. · 2022

Fluorine‐Enhanced Room Temperature Luminescence of Er‐Doped Crystalline Silicon Open

Xiaoming Wang, Jiajing He, Shenbao Jin, Huan Liu, Hongkai Li , et al. · 2022

The silicon‐based light‐emitting devices are the bottleneck of fully integrated silicon photonics. Doping silicon with erbium (often along with oxygen) is an attractive approach to turn silicon into a luminescent material, which has been e…

Rapid dislocation-mediated solute repartitioning towards strain-aging hardening in a fine-grained dilute magnesium alloy Open

Zhen-Ming Hua, Min Zha, Zhao-Yuan Meng, Shenbao Jin, Gang Sha , et al. · 2022

Achieving appreciable strain-aging hardening coupling with fine-grain strengthening remains a critical challenge in dilute Mg alloys, as high-temperature solid-solution, utilized to impart high-level solutes for strain-aging, inevitably ca…

From Crack-Prone to Crack-Free: Unravelling the Roles of Lab6 in a Β-Solidifying Tial Alloy Fabricated with Laser Additive Manufacturing Open

Danni Huang, Yinghao Zhou, Xiyu Yao, Qiyang Tan, Haiwei Chang , et al. · 2022

From Crack-Prone to Crack-Free: Unravelling the Roles of Lab6 in a Β-Solidifying Tial Alloy Fabricated with Laser Additive Manufacturing Open

Danni Huang, Yinghao Zhou, Xiyu Yao, Qiyang Tan, Haiwei Chang , et al. · 2022

Synergistic effects of Cd, Si and Cr additions on precipitation strengthening and thermal stability of dispersoids in AA3003 alloy Open

Feng Qian, Shenbao Jin, Di Wan, Wenzhe Li, Xingwang Cheng , et al. · 2021

The thermally stable Mn-rich dispersoids in Al alloys were recently reported to have a significant dispersion strengthening effect. Further improvements in the dispersion strengthening and thermal stability of Mn-rich dispersoids are requi…

Formation Mechanism of Laves Phase with Two Morphologies in a Novel 9Cr-3W-3Co-1CuVNbB Steel During Creep Process Open

Bo Xiao, Haokai Dong, Tao Yang, Cyril Cayron, Shenbao Jin , et al. · 2021

Efficient Er/O‐Doped Silicon Light‐Emitting Diodes at Communication Wavelength by Deep Cooling Open

Huimin Wen, Jiajing He, Jin Hong, Shenbao Jin, Zhenming Xu , et al. · 2020

A silicon light source at the communication wavelength is the bottleneck for developing monolithically integrated silicon photonics. Doping silicon with erbium and oxygen ions is considered one of the most promising approaches to produce s…

Atom Probe Tomography Analysis of TiCx Powders Synthesized by SHS in Al/Fe/Cu–Ti–C Systems Open

Shenbao Jin, Haokai Su, Gang Sha · 2019

The stoichiometry of titanium carbide (TiCx) particles is important in determining particle properties. Spherical TiCx powders with particle sizes of 1–5 μm were produced by self-propagating high-temperature synthesis (SHS) in 30 wt.% Al–,…

CSD 1913820: Experimental Crystal Structure Determination Open

Shenbao Jin, H. Xu, Xin Wang, D. Zhang, Ryan Jacobs , et al. · 2019

CSD 1913812: Experimental Crystal Structure Determination Open

Shenbao Jin, H. Xu, Xin Wang, D. Zhang, Ryan Jacobs , et al. · 2019

CSD 1913818: Experimental Crystal Structure Determination Open

Shenbao Jin, Huifang Xu, Xin Wang, D. Zhang, Ryan Jacobs , et al. · 2019

Shenbao Jin YOU? Author Swipe