Explanipedia

Effect of humidity and oxygen on friction, wear and durability of a polymer-bonded molybdenum disulfide (MoS2)-based dry film lubricant (DFL) coating system in large amplitude fretting Open

E. Laolu-Balogun, Steven J. Owen, Scott A. Read, P.H. Shipway, K.T. Voisey · 2024

Investigations into effects of humidity and oxygen on a polymer-bonded MoS2-based dry film lubricant (DFL) coating, on grit-blasted Ti-6Al-4V using a cylinder-on-flat configuration, are reported. Sustained low friction and low wear occurre…

Effect of Humidity and Oxygen on a Polymer-Bonded Mos2-Based Dry Film Lubricant (Dfl) Coating System Open

E. Laolu-Balogun, Steven J. Owen, Simon Read, P.H. Shipway, K.T. Voisey · 2024

Lifetime of MoS2 based DFL systems in fretting with and without a Cu-Ni-In under-layer: The dependence on the topography of the surface onto which the DFL is deposited Open

E. Laolu-Balogun, Steven J. Owen, Timothy J. Booth, G. Pattinson, P.H. Shipway , et al. · 2023

The superior fretting performance of polymer-bonded MoS2-based dry film lubricant (DFL) coating on a plasma-sprayed Cu-Ni-In under-layer is well known. The Cu-Ni-In under-layer changes both the material and the topography of the surface on…

Optimizing High-Order Tet Meshes for Smoothed Particle Hydrodynamics With The Target Matrix Optimization Paradigm Open

W I Nissen, Michael Stees, J. Michael Owen, Steven J. Owen · 2023

Unconstrained paving and plastering method for generating finite element meshes Open

Matthew L Staten, Steven J. Owen, Teddy D Blacker, Robert Kerr · 2023

Computer software for and a method of generating a conformal all quadrilateral or hexahedral mesh comprising selecting an object with unmeshed boundaries and performing the following while unmeshed voids are larger than twice a desired ele…

Advancements in Overlay-Grid-Based Hex Meshing from Noisy 3D Image Data. Open

Steven J. Owen, Corey D Ernst · 2021

Parallel Algorithms for Overlay Grid. Open

Steven J. Owen · 2020

Cubit Fast-start Tutorial 21. Sculpt. Open

Steven J. Owen · 2020

Meshing and Geometry Research and Development. Open

Steven J. Owen · 2020

Small set of unlimited release meshing examples. Open

Teddy D. Blacker, Steven J. Owen · 2020

Parallel Hex Meshing of Volume Fraction Data. Open

Steven J. Owen, Matthew L. Staten · 2020

Sculpt: A new tool for automatic parallel hex meshing. Open

Steven J. Owen · 2020

Guaranteed Quality-Driven Hexahedral Overlay Grid Method Open

Nicolas Legoff, Franck Ledoux, Jean-Christophe Janodet, Steven J. Owen · 2020

Hexahedral mesh generation using overlay grid methods has the benefit of being fully automatic, requiring minimal user input. These methods follow a mesh-first approach where an initial mesh, usually a grid, is used to overlay the referenc…

SNL Data and Visualization: ML Projects at Sandia. Open

Steven J. Owen, Christopher Siefert, Craig M. Vineyard, Ron A. Oldfield · 2020

Mesh Generation for Microstructures Open

Steven J. Owen, Corey Ernst, J.A. Brown, Hojun Lim, Kevin Long , et al. · 2019

A parallel, adaptive overlay grid procedure is proposed for use in generating all-hex meshes for stochastic (SVE) and representative (RVE) volume elements in computational materials modeling. The mesh generation process is outlined includi…

Geometry and Mesh Generation for Representative Volume Elements in Computational Materials Modeling. Open

Steven J. Owen, Benjamin Reedlunn, Corey D Ernst, Coleman Alleman, Hojun Lim · 2019

Sculpt: Automatic Parallel Hexahedral Mesh Generation Open

Steven J. Owen, Corey Ernst, Clinton Stimpson · 2019

Sculpt is a companion application to Cubit designed to run in parallel for generating all-hex meshes of complex geometry. It uses a unique overlay-grid procedure that extracts surfaces from a volume-fraction representation of the geometry.…

Topology Optimization of Cellular Structure. Open

Joshua Robbins, Steven J. Owen, Brett W. Clark, Thomas E. Voth · 2018

This paper presents an end-to-end design process for compliance minimization based topological optimization of cellular structures through to the realization of a final printed product. Homogenization is used to derive properties represent…

Parallel Hexahedral Mesh Generation for White House Geometry with SCULPT. Open

Steven J. Owen, Bradley C. Parks · 2017

Advances in Mesh Generation for Crystal Plasticity Modeling. Open

Steven J. Owen · 2017

An Introduction to Automatic Mesh Generation Algorithms - Part II. Open

Steven J. Owen · 2017

Generating Topologically Optimized Cellular Structures for Additive Manufacturing. Open

Steven J. Owen · 2017

Adaptive Grid-based Hex Meshing for High Performance Computing. Open

Steven J. Owen · 2017

Sculpt: Parallel Grid-Based Hex Meshing from Volume Fractions. Open

Steven J. Owen · 2017

Modeling of additive manufacturing processes for metals: Challenges and opportunities Open

Marianne Francois, Ailing Sun, Wayne E. King, Neil J. Henson, D. Tourret , et al. · 2017

Hexahedral Mesh Generation for Computational Materials Modeling Open

Steven J. Owen, J.A. Brown, Corey Ernst, Hojun Lim, Kevin Long · 2017

A parallel, adaptive overlay grid procedure is proposed for use in generating all-hex meshes for stochastic (SVE) and representative (RVE) volume elements in computational materials modeling. The mesh generation process is outlined includi…

Volume preservation improvement for interface reconstruction hexahedral methods Open

Nicolas Le Goff, Franck Ledoux, Steven J. Owen · 2017

We propose a new post-processing procedure for automatically adjusting node locations of an all-hex mesh to better match the volume of a reference geometry. Hexahedral meshes generated via an overlay grid procedure, where a precise referen…

Preface Open

Steven J. Owen, Xevi Roca, Scott A. Mitchell · 2017

A Template-Based Approach for Parallel Hexahedral Two-Refinement. Open

Steven J. Owen, Ryan Shih · 2016

A template-based approach for parallel hexahedral two-refinement Open

Steven J. Owen, Ryan M. Shih, Corey Ernst · 2016

Steven J. Owen YOU? Author Swipe