Tao Wang
YOU?
Author Swipe
View article: Thermally Driven Lanthanide Dual‐Site Doping Enables High Performance Perovksite Solar Cells via Halide Migration Suppression
Thermally Driven Lanthanide Dual‐Site Doping Enables High Performance Perovksite Solar Cells via Halide Migration Suppression Open
Wide‐bandgap (WBG) perovskite solar cells (PSCs) are critical for tandem architectures but suffer from light‐induced halide segregation and non‐radiative recombination. Although conventional rare‐earth doping passivates defects, it concurr…
View article: Prediction Model of Deformation Resistance and Rolling Force of ESP Production Line Based on the Temperature Gradient
Prediction Model of Deformation Resistance and Rolling Force of ESP Production Line Based on the Temperature Gradient Open
The existence of significant core-surface temperature differences in the strips during the rolling process in the endless strip production line leads to low accuracy in calculating the hot rolling force model assuming uniform temperature. …
View article: Comparative study of the hydrogen-assisted cracking behavior in AISI 420 martensitic stainless steel under different heat treatments
Comparative study of the hydrogen-assisted cracking behavior in AISI 420 martensitic stainless steel under different heat treatments Open
View article: Competitive mechanism between interfacial strengthening and TiC morphology in 45 carbon steel/TA2 clad pipes under wall reduction-controlled three-roll skew rolling
Competitive mechanism between interfacial strengthening and TiC morphology in 45 carbon steel/TA2 clad pipes under wall reduction-controlled three-roll skew rolling Open
View article: Evaluation of UHMWPE prepreg laminates under near simultaneous multiple projectile impacts: Effects of structural shapes and projectile dispersions
Evaluation of UHMWPE prepreg laminates under near simultaneous multiple projectile impacts: Effects of structural shapes and projectile dispersions Open
View article: Interface regulation strategy to prepare high strength and electrical conductivity of nanocarbon/Al composites
Interface regulation strategy to prepare high strength and electrical conductivity of nanocarbon/Al composites Open
View article: Optimization of electromagnetic forming process parameters for curved specimens based on CCD-RSM
Optimization of electromagnetic forming process parameters for curved specimens based on CCD-RSM Open
View article: SU(3) rigid triaxiality in $^{154}$Sm
SU(3) rigid triaxiality in $^{154}$Sm Open
The $^{154}$Sm nucleus, which has long been regarded as a typical quantum system exhibiting axial symmetry, has been recently suggested to exhibit a small degree of triaxiality by Otsuka \textit{et al.}. This small triaxiality was recently…
View article: The microecological mechanism of Cordyceps chanhua promoting soil nitrogen cycling
The microecological mechanism of Cordyceps chanhua promoting soil nitrogen cycling Open
Background The nitrogen cycle is crucial to the function of the Earth's biosphere. Entomogenous fungihave been proven to promote nitrogen metabolism and cycling in host insects, and transfer nitrogen from insects to soil. However, little i…
View article: Design of F-ZIF-67/PDMS-based triboelectric nanogenerator for enhanced cathodic protection
Design of F-ZIF-67/PDMS-based triboelectric nanogenerator for enhanced cathodic protection Open
Metal corrosion poses significant economic and safety challenges across industries, necessitating efficient cathodic protection strategies. Triboelectric nanogenerator (TENG) offers a promising self-powered solution by harvesting ambient m…
View article: Eliminating phase-dependent oxidation: Pt-doping modulates homogeneous alumina growth on dual-phase NiCrAlYHf via lattice and electronic effects
Eliminating phase-dependent oxidation: Pt-doping modulates homogeneous alumina growth on dual-phase NiCrAlYHf via lattice and electronic effects Open
View article: Experimental Study on the Impact Compression Properties of Aluminum Honeycomb with Gradient-Thickness Cell Walls Using a Three-Factor Orthogonal Matrix Design
Experimental Study on the Impact Compression Properties of Aluminum Honeycomb with Gradient-Thickness Cell Walls Using a Three-Factor Orthogonal Matrix Design Open
A novel honeycomb with gradient-thickness cell walls (HGTCWs) is fabricated through chemical etching to achieve progressive thickness reduction in the cell walls. This engineered honeycomb demonstrates superior energy absorption by effecti…
View article: Glass Surface Segmentation with an RGB-D Camera via Weighted Feature Fusion for Service Robots
Glass Surface Segmentation with an RGB-D Camera via Weighted Feature Fusion for Service Robots Open
We address the problem of glass surface segmentation with an RGB-D camera, with a focus on effectively fusing RGB and depth information. To this end, we propose a Weighted Feature Fusion (WFF) module that dynamically and adaptively combine…
View article: Interface nanocrystalline reinforcement mechanism of particle interlayer in pulsed current assisted rolling Mg/Al laminate
Interface nanocrystalline reinforcement mechanism of particle interlayer in pulsed current assisted rolling Mg/Al laminate Open
View article: Antithrombotic therapy for lower limb peripheral arterial disease: A deep dive into guideline quality and recommendation diversity
Antithrombotic therapy for lower limb peripheral arterial disease: A deep dive into guideline quality and recommendation diversity Open
View article: Understanding the performance improvement mechanism of Ti/steel clad plates fabricated by double-layered hot rolling
Understanding the performance improvement mechanism of Ti/steel clad plates fabricated by double-layered hot rolling Open
View article: Cost-effective direct air capture by exceptionally active moisture swing sorption film
Cost-effective direct air capture by exceptionally active moisture swing sorption film Open
View article: Achieving superior ductility and toughening in as-cast 2055 Al–Li alloy through single-pass rolling with a small reduction ratio for homogenization
Achieving superior ductility and toughening in as-cast 2055 Al–Li alloy through single-pass rolling with a small reduction ratio for homogenization Open
Single/double-step conventional homogenization and pre-rolling homogenization treatments were employed to solve the problems of severe dendritic segregation of as-cast 2055 Al–Li alloy, large grain size and grain boundary overburning cause…
View article: Research progress of high energy CL-20/HMX cocrystal explosive
Research progress of high energy CL-20/HMX cocrystal explosive Open
Cocrystal belongs to supramolecular chemistry and it is generally composed of different components including molecules, ions with certain molecular ratio and typical structure. For energetic cocrystals, cocrystallization technology can app…
View article: Lightweight Injection Mold Design and Multi-Objective Process Optimization for UAV Upper Cover
Lightweight Injection Mold Design and Multi-Objective Process Optimization for UAV Upper Cover Open
The growing demand for light-weight unmanned aerial vehicles (UAV) has created a demand for new ways of component design and manufacturing. This study presents the structural optimization and multi-objective process parameter optimization …
View article: 3D Elastomeric Kirigami for Passively Stretchable Fully Soft Vacuum‐Powered Artificial Muscles
3D Elastomeric Kirigami for Passively Stretchable Fully Soft Vacuum‐Powered Artificial Muscles Open
In this article, inspired by the classic 2D kirigami art that achieves diverse deformation through cutting operations on layered materials, a passively stretchable and fully soft vacuum powered artificial muscle (VPAM) based on a 3D elasto…
View article: Letter to the editor: a commentary on “Integrating machine learning and molecular docking to decipher the molecular network of aflatoxin b1-induced hepatocellular carcinoma”
Letter to the editor: a commentary on “Integrating machine learning and molecular docking to decipher the molecular network of aflatoxin b1-induced hepatocellular carcinoma” Open
View article: Microstructure and Mechanical Performance of PBF-LB/M 316L Stainless Steel
Microstructure and Mechanical Performance of PBF-LB/M 316L Stainless Steel Open
The laser-based powder bed fusion of metal (PBF-LB/M) process of 316L stainless steel (SS) was systematically investigated under varying scanning spacings to assess its microstructural and mechanical properties. Optimized laser parameters …
View article: Optimization of Electromagnetic Forming Process Parameters for Curved Specimens Based on CCD-RSM
Optimization of Electromagnetic Forming Process Parameters for Curved Specimens Based on CCD-RSM Open
Electromagnetic forming is an efficient, non-contact high-speed forming technology widely used in aerospace, automotive manufacturing, and other industries. This paper introduces a novel curved workpiece based on an elliptical coil, with c…
View article: Blocking TRPM4 alleviates pancreatic acinar cell damage via an NMDA receptor-dependent pathway in acute pancreatitis
Blocking TRPM4 alleviates pancreatic acinar cell damage via an NMDA receptor-dependent pathway in acute pancreatitis Open
Background: Mitochondrial dysfunction caused by Ca2+ overload in pancreatic acinar cells is an important mechanism in the pathogenesis of acute pancreatitis (AP). Transient receptor potential cation channel melastatin 4 (…
View article: Enhancing OER performance via short-range ordered quantum dots in medium-entropy compounds
Enhancing OER performance via short-range ordered quantum dots in medium-entropy compounds Open
View article: Mechanical behavior of coal and rock with central hole defects under eccentric loading conditions
Mechanical behavior of coal and rock with central hole defects under eccentric loading conditions Open
View article: Application of Quantum Approximate Optimization Algorithm in Three- Dimensional Matching Problem
Application of Quantum Approximate Optimization Algorithm in Three- Dimensional Matching Problem Open
The three-dimensional matching problem is a classic NP-complete problem in combinatorial optimization, with wide applications in resource allocation, task scheduling, and many other practical scenarios. Traditional algorithms for solving t…
View article: Foundations of Top-$k$ Decoding For Language Models
Foundations of Top-$k$ Decoding For Language Models Open
Top-$k$ decoding is a widely used method for sampling from LLMs: at each token, only the largest $k$ next-token-probabilities are kept, and the next token is sampled after re-normalizing them to sum to unity. Top-$k$ and other sampling met…
View article: Research on improving the plastic deformation of Mg alloy plate using corrugated roller
Research on improving the plastic deformation of Mg alloy plate using corrugated roller Open
Enhancing the plastic deformation of Mg alloy significantly impacts the overall shape and bonding quality of corrugated Mg/Al composite plate. To better understand mechanism underlying Mg plastic deformation during the corrugated rolling p…