Tomaso Trombetti
YOU?
Author Swipe
View article: Physically-Based Data-Driven Approach for Anomaly Detection in Long-Term Continuous Monitoring Systems: Application to a Case Study
Physically-Based Data-Driven Approach for Anomaly Detection in Long-Term Continuous Monitoring Systems: Application to a Case Study Open
Smart management of cultural heritage structures benefits from long-term continuous monitoring. Continuous monitoring collects large dataset of measurements that significantly improve the possibility to provide a correct interpretation of …
View article: Experimentally-validated buckling behavior of wire-arc additively manufactured stainless steel bars
Experimentally-validated buckling behavior of wire-arc additively manufactured stainless steel bars Open
Wire-and-Arc Additive Manufacturing (WAAM) is a metal 3D printing technology suitable to realize large-scale elements of complex form. The deposition strategy of metal can be either layer-by-layer, used for shells and solid parts, or dot-b…
View article: Design strength parameters of dot-by-dot Wire-and-Arc Additively Manufactured stainless steel bars
Design strength parameters of dot-by-dot Wire-and-Arc Additively Manufactured stainless steel bars Open
View article: Investigation on the elastic flexural stiffness of dot-by-dot wire-and-arc additively manufactured stainless steel bars
Investigation on the elastic flexural stiffness of dot-by-dot wire-and-arc additively manufactured stainless steel bars Open
Among different metal additive manufacturing (AM) technologies, arc-based Directed Energy Deposition, also known as Wire-and-Arc Additive Manufacturing (WAAM), is considered the most suitable for large-scale structural components productio…
View article: Strength reduction curves for corroded seven‐wire strands
Strength reduction curves for corroded seven‐wire strands Open
Steel seven‐wire strands are highly vulnerable to corrosion phenomena, which can strongly reduce their strength and ductility capacities. Following several parametric studies already conducted on corroded wires and strands, which allowed t…
View article: Wire‐and‐Arc Additive Manufacturing for lattice steel structures: overview of the experimental characterization on dot‐by‐dot rods
Wire‐and‐Arc Additive Manufacturing for lattice steel structures: overview of the experimental characterization on dot‐by‐dot rods Open
With the advent of a new arc‐based additive manufacturing (AM) process, referred to as Wire‐and‐Arc Additive Manufacturing (WAAM), the scale of the metal printed parts increased up to several meters, thus becoming suitable for large‐scale …
View article: Stress-based form-finding of gridshells for Wire-and-Arc Additive Manufacturing considering overhang constraints
Stress-based form-finding of gridshells for Wire-and-Arc Additive Manufacturing considering overhang constraints Open
View article: A multi-performance seismic design procedure to incorporate Crescent Shaped Braces in mid-rise frame structures
A multi-performance seismic design procedure to incorporate Crescent Shaped Braces in mid-rise frame structures Open
View article: Blended structural optimization for wire-and-arc additively manufactured beams
Blended structural optimization for wire-and-arc additively manufactured beams Open
View article: Comprehensive Review on the Dynamic and Seismic Behavior of Flat-Bottom Cylindrical Silos Filled With Granular Material
Comprehensive Review on the Dynamic and Seismic Behavior of Flat-Bottom Cylindrical Silos Filled With Granular Material Open
The seismic design of industrial flat-bottom ground-supported silos filled with granular material still presents several challenges to be addressed. They are related to the main aspects which differentiate silo structures containing granul…
View article: Mechanical response of dot-by-dot wire-and-arc additively manufactured 304L stainless steel bars under tensile loading
Mechanical response of dot-by-dot wire-and-arc additively manufactured 304L stainless steel bars under tensile loading Open
View article: Seismic Design and Performances of Frame Structures Connected to a Strongback System and Equipped with Different Configurations of Supplemental Viscous Dampers
Seismic Design and Performances of Frame Structures Connected to a Strongback System and Equipped with Different Configurations of Supplemental Viscous Dampers Open
The paper investigates the dynamic behavior of structural systems obtained by connecting a moment-resisting frame structure with a vertical rigid truss pinned at the base, known in literature as “strongback,” and equipped with added fluid-…
View article: Experimental behaviour of Wire‐and‐Arc Additively Manufactured stainless steel rods
Experimental behaviour of Wire‐and‐Arc Additively Manufactured stainless steel rods Open
Recently, metal Additive Manufacturing has gained great importance in many industrial sectors with first pioneering applications in also in the Construction field. In particular, a weld‐based technique called Wire‐and‐Arc Additive Manufact…
View article: Influence of Interlayer Forced Air Cooling on Microstructure and Mechanical Properties of Wire Arc Additively Manufactured 304L Austenitic Stainless Steel
Influence of Interlayer Forced Air Cooling on Microstructure and Mechanical Properties of Wire Arc Additively Manufactured 304L Austenitic Stainless Steel Open
Wire‐and‐arc additive manufacturing (WAAM) is an innovative technology that involves deposition of subsequent layers of molten materials. Due to the high deposition rates, this technology is suitable for the production of large‐scale compl…
View article: Analytical estimation of the key performance points of the tensile force-displacement response of Crescent Shaped Braces
Analytical estimation of the key performance points of the tensile force-displacement response of Crescent Shaped Braces Open
View article: AA5083 (Al–Mg) plates produced by wire-and-arc additive manufacturing: effect of specimen orientation on microstructure and tensile properties
AA5083 (Al–Mg) plates produced by wire-and-arc additive manufacturing: effect of specimen orientation on microstructure and tensile properties Open
View article: Experimentally-validated orthotropic elastic model for Wire-and-Arc Additively Manufactured stainless steel
Experimentally-validated orthotropic elastic model for Wire-and-Arc Additively Manufactured stainless steel Open
View article: A time domain approach for data interpretation from long‐term static monitoring of historical structures
A time domain approach for data interpretation from long‐term static monitoring of historical structures Open
The conservation of historical buildings requires periodic inspections, maintenance, and/or strengthening interventions, resulting in significant costs. The accurate estimate of the structural condition may contribute to optimize the alloc…
View article: On the influence of the geometrical irregularities in the mechanical response of Wire-and-Arc Additively Manufactured planar elements
On the influence of the geometrical irregularities in the mechanical response of Wire-and-Arc Additively Manufactured planar elements Open
View article: Assessment of design mechanical parameters and partial safety factors for Wire-and-Arc Additive Manufactured stainless steel
Assessment of design mechanical parameters and partial safety factors for Wire-and-Arc Additive Manufactured stainless steel Open
View article: Estimating Fundamental Dynamic Properties of Structures with Supplemental Dampers by Means of Generalized Single Degree of Freedom Systems
Estimating Fundamental Dynamic Properties of Structures with Supplemental Dampers by Means of Generalized Single Degree of Freedom Systems Open
The dynamic response of complex structures can be estimated by means of Generalized Single Degree of Freedom (G-SDOF) systems. The original concept of the G-SDOF system is revisited using an alternative viewpoint based on the equilibrium o…
View article: Simultaneous design of the topology and the build orientation of Wire-and-Arc Additively Manufactured structural elements
Simultaneous design of the topology and the build orientation of Wire-and-Arc Additively Manufactured structural elements Open
View article: Computational design and manufacturing of a half-scaled 3D-printed stainless steel diagrid column
Computational design and manufacturing of a half-scaled 3D-printed stainless steel diagrid column Open
View article: Long-Term Seismometric Monitoring of the Two Towers of Bologna (Italy): Modal Frequencies Identification and Effects Due to Traffic Induced Vibrations
Long-Term Seismometric Monitoring of the Two Towers of Bologna (Italy): Modal Frequencies Identification and Effects Due to Traffic Induced Vibrations Open
The rise of human activities and the constant increase of vehicles traffic in the cities, and in particular of heavy vehicles such as buses and trucks, causes continues ambient vibrations that can detrimentally affect the conservation of b…
View article: High performance mortar for ductile seismic-resistant unreinforced masonry systems
High performance mortar for ductile seismic-resistant unreinforced masonry systems Open
View article: Tensile properties and microstructural features of 304L austenitic stainless steel produced by wire-and-arc additive manufacturing
Tensile properties and microstructural features of 304L austenitic stainless steel produced by wire-and-arc additive manufacturing Open
View article: Experimental results for structural design of Wire-and-Arc Additive Manufactured stainless steel members
Experimental results for structural design of Wire-and-Arc Additive Manufactured stainless steel members Open
View article: Geometrical Characterization of Wire-and-Arc Additive Manufactured Steel Element
Geometrical Characterization of Wire-and-Arc Additive Manufactured Steel Element Open
In the last decades Additive Manufacturing has gained fundamental importance in the development of digital fabrication for the automotive, aerospace, biomedical and only lately civil engineering field. In particular, the technology of Wire…
View article: Editorial: Innovative Methodologies for Resilient Buildings and Cities
Editorial: Innovative Methodologies for Resilient Buildings and Cities Open
EDITORIAL article Front. Built Environ., 12 July 2019Sec. Earthquake Engineering https://doi.org/10.3389/fbuil.2019.00094
View article: A “direct five-step procedure” for the preliminary seismic design of buildings with added viscous dampers
A “direct five-step procedure” for the preliminary seismic design of buildings with added viscous dampers Open