Z. Huang
YOU?
Author Swipe
View article: Atmospheric pressure plasma etching of Ti-6Al-4 V using SF6 etchant
Atmospheric pressure plasma etching of Ti-6Al-4 V using SF6 etchant Open
Atmospheric pressure plasma (APP) etching has been developed recently into a manufacturing technique for silicon-based materials used for large optical lenses. However, there are few reports published regarding APP etching of non-silicon-b…
View article: The current transport mechanism of the multi-channel AlGaN/GaN high electron mobility transistors
The current transport mechanism of the multi-channel AlGaN/GaN high electron mobility transistors Open
This study introduces the current transport mechanism in electron mobility transistors (HEMTs), focusing specifically on the operating state and current transfer process of multi two-dimensional electron gas (2DEG) channels. In comparison …
View article: Mechanical Properties and Thermal Conductivity of Insulation Boards Prepared from Recycled Glass Fibers and Recycled Thermosetting Polyurethane
Mechanical Properties and Thermal Conductivity of Insulation Boards Prepared from Recycled Glass Fibers and Recycled Thermosetting Polyurethane Open
View article: The Impact of ESG Performance on Equities: The Case of the US Transport
The Impact of ESG Performance on Equities: The Case of the US Transport Open
This study explores the impact of Environmental, Social, and Governance (ESG) performance on the average return and volatility of stocks in the U.S. transport sector. It aims to bridge the gap in literature concerning the direct effects of…
View article: Porous Thermoelectric Materials for Energy Conversion by Thermoelectrocatalysis
Porous Thermoelectric Materials for Energy Conversion by Thermoelectrocatalysis Open
Novel uses of thermoelectric (TE) materials as catalyst and catalyst promoters have been reported recently for a variety of applications such as environmental gas mitigation, battery, and photoreduction of nuclear wastewater. TE Seebeck vo…
View article: Multi-Stage Dolomitization Controlled by Sedimentary Facies and Basement Faults: Insights from the Middle Permian Maokou Formation of the Eastern Sichuan Basin, Sw China
Multi-Stage Dolomitization Controlled by Sedimentary Facies and Basement Faults: Insights from the Middle Permian Maokou Formation of the Eastern Sichuan Basin, Sw China Open
View article: Plasma Etching of Ti6al4v at Atmospheric Pressure Using a Fluorine Based Etchant
Plasma Etching of Ti6al4v at Atmospheric Pressure Using a Fluorine Based Etchant Open
View article: Non-isothermal cure kinetics of aerogel/epoxy composites using differential scanning calorimetry
Non-isothermal cure kinetics of aerogel/epoxy composites using differential scanning calorimetry Open
The present work determines the non-isothermal cure parameters of aerogel/epoxy samples along with the effect of a wetting agent. The cure parameters were calculated using Kissinger and isoconversional methods after which the reaction was …
View article: Aerogel/epoxy thermal coatings for carbon fibre reinforced plastic substrates
Aerogel/epoxy thermal coatings for carbon fibre reinforced plastic substrates Open
The present work studies an aerogel/epoxy composite that was dip coated onto a carbon fibre substrate by adding the aerogel at the 1 h and the 1.5 mark of the epoxy cure. Both coatings show decrease in thermal conductivity values (39% and …
View article: In Situ Tuning of Catalytic Activity by Thermoelectric Effect for Ethylene Oxidation
In Situ Tuning of Catalytic Activity by Thermoelectric Effect for Ethylene Oxidation Open
Thermoelectric material BiCuSeO used as a support and promoter for catalytic ethylene oxidation is reported here. The catalytic activity on the continuous and non-continuous catalyst Pt supported on BiCuSeO was observed to be promoted in-s…
View article: Morphological, optical and thermal characterisation of aerogel-epoxy composites for enhanced thermal insulation
Morphological, optical and thermal characterisation of aerogel-epoxy composites for enhanced thermal insulation Open
The present work explores the possibility of introducing aerogel at different stages of the epoxy resin cure to identify the most effective method that ensures minimal destruction of the aerogel particles. The aerogel particles are added a…
View article: Enhanced thermoelectric performance of Cs doped BiCuSeO prepared through eco-friendly flux synthesis
Enhanced thermoelectric performance of Cs doped BiCuSeO prepared through eco-friendly flux synthesis Open
View article: UV Treatment of Flexible Copper Nanowire Mesh Films for Transparent Conductor Applications
UV Treatment of Flexible Copper Nanowire Mesh Films for Transparent Conductor Applications Open
Copper nanowires have the potential to reach and even exceed the indium tin oxide performances as flexible transparent conductive electrodes. However, for a large-scale production, they need to be fabricated in a high-speed, low-cost way, …
View article: Tuning of Catalytic Activity by Thermoelectric Materials for Carbon Dioxide Hydrogenation
Tuning of Catalytic Activity by Thermoelectric Materials for Carbon Dioxide Hydrogenation Open
An innovative use of a thermoelectric material (BiCuSeO) as a support and promoter of catalysis for CO 2 hydrogenation is reported here. It is proposed that the capability of thermoelectric materials to shift the Fermi level and work funct…
View article: Effect of extrusion and compression moulding on the thermal properties of nylon-6/silica aerogel composites
Effect of extrusion and compression moulding on the thermal properties of nylon-6/silica aerogel composites Open
The article presents the effect of a lower extrusion speed and compression moulding processes on the thermal properties of polyamide 6 (PA-6)/aerogel composite. Scanning electron and optical microscope images showed that although most of t…
View article: Feasibility of an Electrostatic Energy Harvesting Device for CFCs Aircraft
Feasibility of an Electrostatic Energy Harvesting Device for CFCs Aircraft Open
A novel energy harvesting concept is proposed for treating local electrostatic energy produced on flying composite
\naircrafts. This work focuses on the feasibility research on collecting static charges with capacitive collectors. The
\nex…