Explanipedia

Overcoming Response-Recovery Kinetic Mismatch in Soft Actuators Via Synergistic Material Design for Multimodal Moisture-Responsive Actuation Open

Sen Lin, Jialu Liu, Nan Zhang, Yan Xia, Suqian Ma , et al. · 2025

Near-infrared light-driven programmable shape memory polymer for self-shaping 3D printing methods Open

Zirui Liu, Yifan Li, Suqian Ma, Chang Liu, Yulong Zhang , et al. · 2024

The development of 3D printing shape memory polymer (SMP) is restricted by the laborious manual programming for shaping, limited deformation modes, and the use of conventional heating methods for deformation. This study introduces a novel …

Study of Self-Locking Structure Based on Surface Microstructure of Dung Beetle Leg Joint Open

Dexin Sun, Sen Lin, Yubo Wang, Jiandong Cui, Zhiwei Tuo , et al. · 2024

Dung beetle leg joints exhibit a remarkable capacity to support substantial loads, which is a capability significantly influenced by their surface microstructure. The exploration of biomimetic designs inspired by the surface microstructure…

Bionic Design of High-Performance Joints: Differences in Failure Mechanisms Caused by the Different Structures of Beetle Femur–Tibial Joints Open

Jiandong Cui, Yubo Wang, Sen Lin, Zhiwei Tuo, Zhaohua Lin , et al. · 2024

Beetle femur–tibial joints can bear large loads, and the joint structure plays a crucial role. Differences in living habits will lead to differences in femur–tibial joint structure, resulting in different mechanical properties. Here, we de…

Validation of an Ultra-Sensitive Method for Quantitation of Phospho-Tau 217 (pTau217) in Human Plasma, Serum, and CSF using the ALZpath pTau217 Assay on the Quanterix HD-X Platform Open

Hua Zhang, J. Liu, Nan Zhang, Andreas Jeromin, Zhaohua Lin · 2024

Validation of the ALZpath pTau217 Simoa assay in human plasma, serum, and CSF demonstrates ultra sensitivity, high accuracy, and assay robustness. Together with other established and sensitive assays for pTau181, GFAP, and NfL, these assay…

3D printed auxetic metamaterials with tunable mechanical properties and morphological fitting abilities Open

Yazhou Yuan, Suqian Ma, Xianyan Sun, Boya Chen, Yuchao Luo , et al. · 2024

Research on creating special structures with a negative Poisson’s ratio, known as auxetic metamaterials, is widely conducted for potential applications in flexible electronics, aerospace, biomedicine, and other fields. Auxiticity is the ph…

4d Printing of Shape Memory Polymers with Self-Folding Deformation and Multi-Stimulus Response Open

Lan Zhang, Wei Zhang, Qiushi Wang, Suqian Ma, Yunhong Liang , et al. · 2024

Preparation and Application of Nature-Inspired High-Performance Mechanical Materials Open

Jiandong Cui, Yan Xia, Yingqing Yu, Hong Xu, Nan Zhang , et al. · 2024

3d Printed Auxetic Metamaterials with Tunable Mechanical Properties and Morphological Fitting Abilities Open

Yazhou Yuan, Suqian Ma, Xianyan Sun, Boya Chen, Zhaohua Lin , et al. · 2024

Composite Flexible Sensor Based on Bionic Microstructure to Simultaneously Monitor Pressure and Strain Open

Meng Wang, Zhaohua Lin, Suqian Ma, Yingqing Yu, Boya Chen , et al. · 2023

To achieve the human sense of touch, a strain sensor needs to be coupled with a pressure sensor to identify the compliance of the contacted material. However, monitoring the pressure‐strain signals simultaneously and ensuring no coupling e…

Continuous 3D Printing of Biomimetic Beetle Mandible Structure with Long Bundles of Aramid Fiber Composites Open

Shuigen Li, Chang Liu, Yulong Zhang, Wei Zhang, Xuefei Xu , et al. · 2023

Fiber-reinforced composites are an ideal high-performance composite material made from a combination of high-strength continuous fibers and a polymer matrix. Compared to short cut fibers, continuous long strand fibers can improve the mecha…

Low‐Voltage Driven Ionic Polymer‐Metal Composite Actuators: Structures, Materials, and Applications Open

Hao Zhang, Zhaohua Lin, Yong Hu, Suqian Ma, Yunhong Liang , et al. · 2023

With the characteristics of low driving voltage, light weight, and flexibility, ionic polymer‐metal composites (IPMCs) have attracted much attention as excellent candidates for artificial muscle materials in the fields of biomedical device…

Influence Mechanism of Aqueous Organic Components on the Hydrochar Formation Reaction During the Biomass Hydrothermal Carbonization Wastewater Recycling Open

Ruikun Wang, Zhaohua Lin, Pingbo Peng, Shiteng Tan, Zhenghui Zhao , et al. · 2022

Energy Yield Optimization for Co-Hydrothermal Carbonization of Sewage Sludge and Pinewood Sawdust Coupling with Anaerobic Digestion of the Produced Wastewater Open

Ruikun Wang, Kai Lin, Pingbo Peng, Zhaohua Lin, Zhenghui Zhao , et al. · 2022

Investigations of Interfacial Heat Transfer and Droplet Nucleation on Bioinspired Superhydrophobic Surface for Anti-Icing/De-Icing Open

Konghua Yang, Qi Liu, Zhaohua Lin, Yunhong Liang, Chunbao Liu · 2022

Effect of Blending Lignocellulosic Components on the Hydrothermal Carbonization Reaction Pathway and Product Properties of Protein-Rich Biomass Open

Ruikun Wang, Senyang Liu, Meng Shu, Zhaohua Lin, Zhenghui Zhao , et al. · 2022

Ethanol Phase Change Actuator Based on Thermally Conductive Material for Fast Cycle Actuation Open

Zirui Liu, Bo Sun, Jianjun Hu, Yunpeng Zhang, Zhaohua Lin , et al. · 2021

Artificial muscle actuator has been devoted to replicate the function of biological muscles, playing an important part of an emerging field at inter-section of bionic, mechanical, and material disciplines. Most of these artificial muscles …

Study on the factors affecting the mechanical properties and recovery force of PLA/PEEK blends Open

Lan Zhang, Suqian Ma, Haohua Xiu, Zhaohua Lin, Zhihui Zhang · 2021

It has been found that PLA/PEEK blends have excellent mechanical properties and shape memory properties. In this article, the properties of PLA/PEEK blends were further studied. The mechanical properties of PLA/PEEK blends may be directly …

Integration 3D printing of bionic continuous carbon fiber reinforced resin composite Open

Qian Zhao, Chang Liu, Yunhong Liang, Zhaohua Lin, Zhiwu Han , et al. · 2021

Inspired by microstructure characteristics of mantis shrimp propodus with high mechanical strength, the bionic continuous carbon fiber (CF) reinforced acrylonitrile butadiene styrene (ABS) resin composite with layered spiral structure was …

Bionic Design and 3D Printing of Continuous Carbon Fiber-Reinforced Polylactic Acid Composite with Barbicel Structure of Eagle-Owl Feather Open

Yunhong Liang, Chang Liu, Qian Zhao, Zhaohua Lin, Zhiwu Han , et al. · 2021

Inspired by eagle-owl feather with characteristics of light weight and high strength, the bionic continuous carbon fiber-reinforced polylactic acid composite with barbicel structure was successfully 3D printed. Under the action of external…

3D printed aluminum matrix composites with well-defined ordered structures of shear-induced aligned carbon fibers Open

Yunhong Liang, Han Wu, Zhaohua Lin, Qingping Liu, Zhihui Zhang · 2021

Carbon fiber reinforced aluminum composites with ordered architectures of shear-induced aligned carbon fibers were fabricated by 3D printing. The microstructures of the printed and sintered samples and mechanical properties of the composit…

Study on preparation and mechanical properties of bionic carbon fiber reinforced epoxy resin composite with eagle feather structure Open

Yunhong Liang, Zhiwei Tuo, Qian Zhao, Sen Lin, Zhaohua Lin , et al. · 2021

Inspired by the effect of angle between feather shaft and the feather vane on strength enhancement of feather structure, carbon fiber reinforced epoxy resin composites with eagle feather structure were prepared successfully. Based on liqui…

Zhaohua Lin YOU? Author Swipe