Explanipedia

Effect of heat treatment on the interfacial characteristics and mechanical properties of bimetal composite Open

Jingru Yan, Lisong Zhu, Xiaojun Liang, Zhao Xing, Hongbin Li , et al. · 2025

Advanced synthesis of hBN/TiO <sub>2</sub> nanocomposites for water-based lubricants: tribological performance and mechanism Open

Afshana Morshed, Fei Lin, Hui Wu, Zhao Xing, Sihai Jiao , et al. · 2025

In this study, hexagonal boron nitride/titanium dioxide (hBN/TiO 2 ) nanocomposites were synthesised using a novel, facile, and eco-friendly method. The preparation method consisted of oxygen plasma treatment and sonochemical processes. Th…

Research on a novel deposition process for a-C multilayer films with enhanced interfacial bonding strength on SS316L bipolar plates Open

Xiaoxing Yang, Cunlong Zhou, Dapeng Bian, Zhengyi Jiang, Jingwei Zhao , et al. · 2025

Correction: Physical Simulation of Flash Butt Welding of 590CL Steel for Automotive Wheel Using: Process, Microstructure and Mechanical Properties Open

Lisong Zhu, Hongqiang Liu, Zhiqiang Zhang, Mengyuan Ren, Hao Liu , et al. · 2025

Austenite Grain Growth Behavior and Dynamic Model of ADB790E Hydropower Steel Open

Yuxuan Liu, Hongmei Zhang, Zhongxiang Yu, Zhengyi Jiang · 2025

The growth behavior of austenite grains in ADB790E hydropower steel under the synergistic effects of heating temperature and holding time was studied using in situ quenching and an in situ high-temperature confocal laser scanning microscop…

Taguchi Optimization of Corrosion Resistance and Wettability of a-C Films on SS316L Deposited via Magnetron Sputtering Technique Open

Xiaoxing Yang, Cunlong Zhou, Zhengyi Jiang, Jingwei Zhao, Tianxiang Wang , et al. · 2025

Due to the exceptional corrosion resistance, chemical stability, and dense microstructure, carbon-based thin films are extensively employed in hydrogen energy systems. This study employed magnetron sputtering to fabricate amorphous carbon …

Wettability, Tribology, Degradation, and Topography of Laser-Textured Surfaces of Biopolymers Open

Ciprian Ciofu, Petronela-Daniela Rusu, Marcin Adamiak, Oktawian Bialas, Nicolae Cătălin Tâmpu , et al. · 2025

Surface texturing involves creating micro-channels, micro-dimples, micro-grooving, and other surface modifications. To do this, laser and micromachining are employed on the substrate surface in addition to other methods. The surface charac…

Dietary factors causally affect the risk of kidney cancer: a two-sample Mendelian randomization study Open

Congcong Zhu, Tonghu Liu, Zhengyi Jiang, Hui Wang, Mengran Zhang , et al. · 2025

Effect of grain size and intergranular oxides at prior powder-particle boundaries on the mechanical properties of 316 stainless steels by powder metallurgy hot isostatic pressing: strengthening versus embrittlement Open

Zhiyang Wang, Lei Zhu, N. Eslamirad, Elliot P. Gilbert, Qiang Zhu , et al. · 2025

The mechanical performance of powder metallurgy metallic materials is closely tied to their microstructures, particularly grain size and precipitation. In this study, the microstructure and mechanical properties of AISI 316 stainless steel…

Advances in 3D Printing: Microfabrication Techniques and Forming Applications Open

Di Pan, Fanghui Jia, Muyuan Zhou, Hao Liu, Jingru Yan , et al. · 2025

Stainless steel is essential in high-performance industries due to its strength, corrosion resistance, and biocompatibility. However, conventional manufacturing methods limit material efficiency, design complexity, and customization. Addit…

Size Effect on Tensile Properties and Fracture Mechanism of Micro-Rolled Ultra-Thin Cu/Al Composite Sheet Open

Pengkun Zhang, Hongmei Zhang, Guoao Yu, Zhengyi Jiang · 2025

In this study, a laboratory-precision four-high micro-rolling mill was employed to investigate the influence of grain size on the deformation behavior and fracture mechanism of a micro-rolled Cu/Al composite ultra-thin sheet. Analytical te…

A tribological investigation of water-based nanolubricants prepared by mechanically synthesised hBN/TiO<sub>2</sub> nanocomposites Open

Afshana Morshed, Fei Lin, Hui Wu, Zhao Xing, Sihai Jiao , et al. · 2025

Environmentally friendly synthesis techniques have gained increasing attention as viable methodologies for preparing nanocomposite. In particular, ball milling has emerged as a green and cost-effective method that ensures the control of si…

Ambient to Elevated Temperature: Ecotribology of Water-Based Lubricants Incorporating hBN/TiO2 Nanoadditives Open

Afshana Morshed, Fei Lin, Hui Wu, Zhao Xing, Sihai Jiao , et al. · 2025

Ecotribology focuses on both saving energy resources and reducing environmental pollution. Considering environmental concerns, water-based nanolubricants have gained significant attention over conventional oil-based ones. Non-ecotoxic and …

Origin of back stress generation during tensile deformation of a heterostructured titanium alloy: An in-situ EBSD study on local slip system activation Open

Ling-Jian Meng, Yuyue Wang, Xin Li, Zhihua Wang, Zhengyi Jiang , et al. · 2025

Effect of triethanolamine borate on corrosion resistance of hot-rolled mild steels in industrial laminar cooling processes Open

Muyuan Zhou, Lisong Zhu, Di Pan, Xuetao Luo, Hao Liu , et al. · 2025

Corrigendum to ‘Effect of abrasive water jet descaling process on surface quality of hot-rolled 304 stainless steel’ [J Mater Res Technol 37 (2025)1959-1969] Open

Rui Guo, Cunlong Zhou, Zelin Chai, Chao Li, Zhengyi Jiang · 2025

Effect of abrasive water jet descaling process on surface quality of hot-rolled 304 stainless steel Open

Rui Guo, Cunlong Zhou, Zelin Chai, Chao Li, Zhengyi Jiang · 2025

Based on a self-developed abrasive water jet (AWJ) descaling test bench, the effects of process parameters on surface roughness, plastic deformation, material erosion, and microhardness of hot-rolled 304 stainless steel were investigated. …

Unveiling the interface fracture mechanism dominated by intermetallic compounds during tensile deformation of copper/aluminum composite thin strips Open

Chen Wang, Lingjian Meng, Xiaoguang Ma, Zhengyi Jiang, Jingwei Zhao · 2025

Advances in Preparation Methods and Numerical Simulation of Composites: Formation and Properties Open

Zhengyi Jiang, Hongmei Zhang · 2025

Advanced composite materials are lightweight, have high strength, and have designable performance [...]

Optimization of Forming Parameters and Forming Strategy for Stamping of Novel Ultra-Thin Super Ferritic Stainless Steel Bipolar Plates Based on Numerical Simulation Open

Jun Lan, Jian Han, Lisong Zhu, Jingwen Song, Meiqing Meng , et al. · 2025

This study investigates the forming process (stamping) of bipolar plates which have applied a novel ultra-thin (0.1 mm) super ferritic stainless steel, i.e., SUS470, whose chromium is sufficiently high for corrosion resistance. A three-dim…

Solid-liquid heat-treatment improving microstructural homogeneity and healing pores/cracks in Ni60A hardfacing layer Open

Lei Yu, Yingjie Yan, Jinyuan Ma, Hao Dong, Lisong Zhu , et al. · 2025

Ni-Cr-B-Si hardfacing alloys are expected to be used in pumps of nuclear power plants owing to their excellent wear resistance and lower dose rate. Microstructural heterogeneity and pores/cracks are main issues that limit the widespread co…

Study of deep multimodal information fusion–based digital twin method for gearbox fault diagnosis Open

Chang Cai, Zhengyi Jiang, Hui Wu, Junsheng Wang, Jiawei Liu , et al. · 2025

Faults in gearbox systems occur frequently due to their complexity, while existing simulation models often struggle to provide an accurate description of gearbox fault behaviors. Thereby, accurately and instantaneously determining the oper…

Microstructure characteristics induced brittleness of hot isostatic pressing (HIP) diffusion bonded Ni60A hardfacing layer Open

Lei Yu, Rui Cao, Zhengyi Jiang, Yingjie Yan, Jinyuan Ma , et al. · 2025

The fracture behavior of the hot isostatic pressing (HIP) diffusion bonded Ni60A hardfacing layer was evaluated by macro-indentation and uniaxial tensile methods. The macro-indentation fracture toughness (KIC = 15.5 MPa m1/2) and the tensi…

Study on wear performance of a novel high-carbon medium manganese bimetal composite using in mining facilities Open

Jingru Yan, Muyuan Zhou, Afshana Morshed, Hui Wu, Xiaojun Liang , et al. · 2025

A pin-on-disc tribological test was employed to investigate the self-strengthening effect on the wear performance of a novel Mn8/SS400 bimetal composite. Accelerated wear tests were conducted under normal loads of 20, 60, and 100 N. The re…

The Effects of Pass Number and Die Channel Angle of Equal Channel Angular Pressing on Innovative Magnesium Composite Material Open

Xin Zhang, Jian Han, Jing Tian, Lisong Zhu, Yanfeng Wang , et al. · 2025

The effects of the designed equal channel angular pressing (ECAP) procedures on microstructures, mechanical properties and corrosion resistances of newly developed nano-MgO/Mg–Zn–Ca composite materials have been investigated in this study.…

Deformation and Fracture Behaviour of Heterostructure Mn8/SS400 Bimetal Composite Open

Shengnan Yuan, Cunlong Zhou, Haibo Xie, Mengyuan Ren, Fei Lin , et al. · 2025

This study examines the deformation behaviour and fracture mechanisms of bimetal composites (BCs) composed of high-carbon medium-manganese steel (Mn8) and low-carbon steel (SS400), fabricated through hot roll bonding. The research highligh…

Forming Rate Dependence of Novel Austenitising Bending Process for a High-Strength Quenched Micro-Alloyed Steel: Experiments and Simulation Open

Yao Lu, Jun Wang, Zhou Li, Fei Lin, Di Pan , et al. · 2025

This austenitising bending investigation was carried out in a vacuum environment with the forming rates of 1, 10, and 100 mm/min under a certain bending temperature of 900 °C by a thermomechanical simulator. The enhanced strength at the ac…

Accelerating Data Access for Single Node in Distributed Storage Systems via MDS Codes Open

Hao Shi, Zhengyi Jiang, Zhongyi Huang, Linqi Song, Hanxu Hou · 2025

Maximum distance separable (MDS) array codes are widely employed in modern distributed storage systems to provide high data reliability with small storage overhead. Compared with the data access latency of the entire file, the data access …

Effects of annealing temperature on the microstructure, mechanical properties, and tribological performance of the Mn8/SS400 bimetal composite Open

Shengnan Yuan, Haibo Xie, Mengyuan Ren, Fei Lin, Lisong Zhu , et al. · 2025

Ultrafast laser welding of transparent materials: from principles to applications Open

Xianshi Jia, Jinlin Luo, Kai Li, Cong Wang, Li Zhou , et al. · 2025

The ultrafast laser-matter interaction is explored to induce new pioneering principles and technologies into the realms of fundamental science and industrial production. The local thermal melting and connection properties of the ultrafast …

Zhengyi Jiang YOU? Author Swipe