Thermistor ≈ ThermistorThermistor
View article
Inkjet-Printed Graphene/PEDOT:PSS Temperature Sensors on a Skin-Conformable Polyurethane Substrate Open
Epidermal electronic systems (EESs) are skin-like electronic systems, which can be used to measure several physiological parameters from the skin. This paper presents materials and a simple, straightforward fabrication process for skin-con…
View article
Behaviour of a group of energy piles Open
A full-scale experimental site with four energy test piles was built on the campus of the Swiss Federal Institute of Technology in Lausanne, Switzerland. This site was used to investigate interaction effects within a group of energy piles.…
View article
Printed Temperature Sensor Based on PEDOT: PSS-Graphene Oxide Composite Open
Temperature sensing is an important parameter needed to be measured by the eSkin during the physical interaction of robots with real-world objects. Yet, most of the work on sensors in eSkin has focused on pressure sensing. Here we present …
View article
Comparative Study of Surface Temperature Behavior of Commercial Li-Ion Pouch Cells of Different Chemistries and Capacities by Infrared Thermography Open
The non-uniform surface temperature distribution of a battery cell results from complex reactions inside the cell and makes efficient thermal management a challenging task. This experimental work attempts to determine the evolution of surf…
View article
A biomimetic laminated strategy enabled strain-interference free and durable flexible thermistor electronics Open
The development of flexible thermistor epidermal electronics (FTEE) to satisfy high temperature resolution without strain induced signal distortion is of great significance but still challenging. Inspired by the nacre microstructure capabl…
View article
Large‐Area All‐Printed Temperature Sensing Surfaces Using Novel Composite Thermistor Materials Open
Surfaces which can accurately distinguish spatial and temporal changes in temperature are critical for not only flow sensors, microbolometers, process control, but also future applications like electronic skins and soft robotics. Realizing…
View article
Printable cellulose-based electroconductive composites for sensing elements in paper electronics Open
Conductive flexible hydrogel composites were printed on paper substrates using a functional ink, which was designed and formulated for screen-printing. The inks were prepared using abundant and eco-friendly materials by blending carbon fib…
View article
Considerations for temperature sensor placement on rotary-wing unmanned aircraft systems Open
Integrating sensors with a rotary-wing unmanned aircraft system (rwUAS) can introduce several sources of biases and uncertainties if not properly accounted for. To maximize the potential for rwUAS to provide reliable observations, it is im…
View article
Flexible Temperature Sensors Open
Temperature reflects the balance between production and dissipate of heat. Flexible temperature sensors are primary sensors used for temperature monitoring. To obtain real-time and accurate information of temperature, different flexible te…
View article
Seasonal evolution of an ice‐shelf influenced fast‐ice regime, derived from an autonomous thermistor chain Open
Ice shelves strongly interact with coastal Antarctic sea ice and the associated ecosystem by creating conditions favorable to the formation of a sub‐ice platelet layer. The close investigation of this phenomenon and its seasonal evolution …
View article
Recent advances and challenges in temperature monitoring and control in microfluidic devices Open
Temperature is a critical—yet sometimes overlooked—parameter in microfluidics. Microfluidic devices can experience heating inside their channels during operation due to underlying physicochemical phenomena occurring therein. Such heating, …
View article
A Study of Thermistor Performance within a Textile Structure Open
Textiles provide an ideal structure for embedding sensors for medical devices. Skin temperature measurement is one area in which a sensor textile could be particularly beneficial; pathological skin is normally very sensitive, making the co…
View article
A Comparison between Conductive and Infrared Devices for Measuring Mean Skin Temperature at Rest, during Exercise in the Heat, and Recovery Open
These results indicate poor agreement between conductive and infrared devices at rest, during exercise in the heat, and subsequent recovery. Infrared devices may not be suitable for monitoring [Formula: see text] in the presence of, or fol…
View article
A nanoforest-based humidity sensor for respiration monitoring Open
Traditional humidity sensors for respiration monitoring applications have faced technical challenges, including low sensitivity, long recovery times, high parasitic capacitance and uncalibrated temperature drift. To overcome these problems…
View article
Validation of an ingestible temperature data logging and telemetry system during exercise in the heat Open
Aim: Intestinal temperature telemetry systems are promising monitoring and research tools in athletes. However, the additional equipment that must be carried to continuously record temperature data limits their use to training. The purpose…
View article
Qualitative and quantitative schlieren optical measurement of the human thermal plume Open
A new large-field, high-sensitivity, single-mirror coincident schlieren optical instrument has been installed at the Bauhaus-Universität Weimar for the purpose of indoor air research. Its performance is assessed by the non-intrusive measur…
View article
A Field‐Deployable, Wearable Leaf Sensor for Continuous Monitoring of Vapor‐Pressure Deficit Open
This work presents a wearable sensor for real‐time on‐leaf monitoring of relative humidity (RH), temperature, and vapor‐pressure deficit (VPD) of plants in both controlled environments and under field conditions. This sensor is flexible an…
View article
Advancements, measurement uncertainties, and recent comparisons of the NOAAfrost point hygrometer Open
The NOAA frost point hygrometer (FPH) is a balloon-borne instrument flown monthly at three sites to measure water vapor profiles up to 28 km. The FPH record from Boulder, Colorado, is the longest continuous stratospheric water vapor record…
View article
Barium titanate-based thermistors: Past achievements, state of the art, and future perspectives Open
Barium titanate materials displaying a positive temperature coefficient of resistivity are ubiquitously employed as thermistors in electrical current and voltage control systems, as well as in gas and thermal sensing applications. The posi…
View article
Using a thermistor flowmeter with attached video camera for monitoring sponge excurrent speed and oscular behaviour Open
A digital, four-channel thermistor flowmeter integrated with time-lapse cameras was developed as an experimental tool for measuring pumping rates in marine sponges, particularly those with small excurrent openings (oscula). Combining flowm…
View article
A Miniaturized Nickel Oxide Thermistor via Aerosol Jet Technology Open
In this study, a miniaturized thermistor sensor was produced using the Aerosol Jet printing process for temperature sensing applications. A nickel oxide nanoparticle ink with a large temperature coefficient of resistance was fabricated. Th…
View article
Printed dose-recording tag based on organic complementary circuits and ferroelectric nonvolatile memories Open
We have demonstrated a printed electronic tag that monitors time-integrated sensor signals and writes to nonvolatile memories for later readout. The tag is additively fabricated on flexible plastic foil and comprises a thermistor divider, …
View article
Filament Temperature Dynamics in Fused Deposition Modelling and Outlook for Control Open
Fused Deposition Modelling (FDM), a form of Additive Manufacture, can produce 3D components directly from CAD data. This paper investigated fluctuations in filament temperature during step changes in feed rate and start/stop motions, monit…
View article
Studies of scintillation properties of CaMoO4 at millikelvin temperatures Open
Application of CaMoO4 as a scintillation target in cryogenic rare event searches relies on the understanding of scintillation properties of the material at the temperatures at which these detectors operate. We devised and implemented a det…
View article
Proving the robustness of a PEDOT:PSS-based thermistor<i>via</i>functionalized graphene oxide–poly(vinylidene fluoride) composite encapsulation for food logistics Open
We introduced a FGO–PVDF composite as an encapsulation layer to prove the reliability of PEDOT:PSS thermistors under high-humidity conditions to realize an NFC-enabled smart label for monitoring time-temperature history of a food item alon…
View article
A Wearable Textile Thermograph Open
In medicine, temperature changes can indicate important underlying pathologies such as wound infection. While thermographs for the detection of wound infection exist, a textile substrate offers a preferable solution to the designs that exi…
View article
Use of Thermistor Temperature Sensors for Cyber-Physical System Security Open
The last few decades have seen a large proliferation in the prevalence of cyber-physical systems. This has been especially highlighted by the explosive growth in the number of Internet of Things (IoT) devices. Unfortunately, the increasing…
View article
Ultrathin Fiber‐Mesh Polymer Thermistors Open
Flexible sensors enable on‐skin and in‐body health monitoring, which require flexible thermal protection circuits to prevent overheating and operate the devices safely. Here, ultrathin fiber‐mesh polymer positive temperature coefficient (P…
View article
Multisensory graphene-skin for harsh-environment applications Open
Monitoring the environment using electronic systems in harsh environments requires materials and processes that can withstand harsh environments. Environmental harshness can come from the surrounding temperature, varying pressure, intense …
View article
A High Precision, Wireless Temperature Measurement System for Pervasive Computing Applications Open
This paper describes the design and calibration of a highly accurate temperature measurement system for pervasive computing applications. A negative temperature coefficient (NTC) thermistor with high resistance tolerance is interfaced thro…