Linear density
View article
Investigation of the Mechanical Properties of a Carbon Fibre-Reinforced Nylon Filament for 3D Printing Open
Additive manufacturing (i.e., 3D printing) has rapidly developed in recent years. In the recent past, many researchers have highlighted the development of in-house filaments for fused filament fabrication (FFF), which can extend the corres…
View article
A Review on Different Factors of Woven Fabrics’ Strength Prediction Open
There are different fabric manufacturing methods like weaving, knitting, non-woven and braiding. Among them woven fabric shows good dimensional stability and good cover. One of the most important characteristics of woven fabric is strength…
View article
Quasi-static puncture resistance behaviors of high-strength polyester fabric for soft body armor Open
A series of economical and flexible fabrics were prepared using high-strength polyester yarns with different fabric structures, weft density and number of layers. The effect of these factors on quasi-static puncture resistance was comparat…
View article
Influence of the Extraction Location on the Physical and Mechanical Properties of the Pseudo-Trunk Banana Fibers Open
The specific properties and availability of banana pseudo-trunk fibers make them a promising alternative for the development of green composites. However, the wide dispersion of their properties can hinder their use. In this study, the inf…
View article
Thermo-physiological properties of polyester–cotton plated fabrics in relation to fibre linear density and yarn type Open
Thermo-physiological properties of textiles are crucial in determining the heat and moisture transport from skin to environment and in the assessment of overall wearer comfort. Engineering fabrics with desirable thermo-physiological proper…
View article
Accurate measurement of specific tensile strength of carbon nanotube fibers with hierarchical structures by vibroscopic method Open
Since carbon nanotube (CNT) fibers have a hierarchical structure, the specific strength of CNT fibers can be estimated to be much higher than its real value when the linear density of the fiber is measured using the vibroscopic method.
View article
Porosity and air permeability relationship of denim fabrics produced using core-spun yarns with different filament finenesses for filling Open
In this article, porosity and air permeability of denim fabric produced from filament core-spun yarns with different filament fineness and yarn linear density were demonstrated. For this purpose, 110 dtex drawn textured polyester filaments…
View article
Physical properties of single jersey derivative knitted cotton fabric with tuck and miss stitches Open
The effect of different stitch combinations, namely, knit, tuck and miss stitches, on some of the physical properties of single jersey derivative fabrics have been studied. Fabrics which are in common commercial use in the textile industry…
View article
Process–Property Relationships for Melt-Spun Poly(lactic acid) Yarn Open
Poly(lactic acid) (PLA) is an attractive biomaterial due to its biocompatibility, biodegradability, and fiber-forming ability. However, the polymer is highly susceptible to both hydrolytic and thermal degradation during processing. Melt pr…
View article
Development of Low Hysteresis, Linear Weft-Knitted Strain Sensors for Smart Textile Applications Open
In recent years, knitted strain sensors have been developed that aim to achieve reliable sensing and high wearability, but they are associated with difficulties due to high hysteresis and low gauge factor (GF) values. This study investigat…
View article
Effect of Blend Ratio on the Quality Characteristics of Recycled Polyester/Cotton Blended Ring Spun Yarn Open
This study investigates the effect of the blend ratio on recycled blended yarn quality characteristics. Ring-spun yarns of linear density of 23.6, 29.5 and 39.4 tex were produced from five blend proportions of recycled polyester and cotton…
View article
Investigation of various factors affecting the coefficient of friction of yarnby using Taguchi method Open
This research aims to analyze certain effects of yarn characteristics such as: cotton type, yarn quality, yarn spinning technique, yarn twist and linear density and yarn finish on coefficient of friction of yarn by using Taguchi approach. …
View article
Influence of the Structural Parameters of Woven Fabrics on their Drapeability Open
Drape is a very important utility parameter of fabrics, especially applied in clothing. It influences the aesthetic effect of clothing, in particular its fitting to the user’s body. Fabric draping is the result of interaction between gravi…
View article
Investigation of Moisture Management and Air Permeability Properties of Fabrics with Linen and Linen-Polyester Blend Yarns Open
This paper has focused on moisture management (MMT) and air permeability properties of fabrics produced from linen (100%) and linen-polyester yarns (80% polyester and 20% linen) at different weft densities. In the experimental study, eight…
View article
Galactic cold cores Open
Filaments are key for star formation models. As part of the study carried out by the Herschel GCC Programme, here we study the filament properties presented in GCC.VII in context with theoretical models of filament formation and evolution.…
View article
Effects of Filament Linear Density on the Comfort Related Properties of Polyester Knitted Fabrics Open
One of the most important developments seen in the synthetic fibre industry is absolutely producing microfibres. Microfibres provide many distinguishing properties for different end uses. In this study, the effects of filament linear densi…
View article
Comprehensive Characterization of Structural, Electrical, and Mechanical Properties of Carbon Nanotube Yarns Produced by Various Spinning Methods Open
A comprehensive characterization of various carbon nanotube (CNT) yarns provides insight for producing high-performance CNT yarns as well as a useful guide to select the proper yarn for a specific application. Herein we systematically inve…
View article
Study on pilling performance of polyester-cotton blended woven fabrics Open
Aiming at the classic problem of pilling of polyester-cotton blended woven fabrics, pilling grades were evaluated by image analysis method to study the effects of yarn twist, spinning method, warp, and weft density, fabric cover factor and…
View article
ANALYZING SOME OF THE DUAL-CORE YARN SPINNING PARAMETERS ON YARN AND VARIOUS FABRIC PROPERTIES Open
Nowadays, in order to improve some of the properties of core-spun yarns, a new type of core-spun yarn called as dual-core has been developed. In literature, there are limited studies and hence findings about dual-core yarns. Therefore, in …
View article
Prediction and Correlation of Air Permeability and Light Transmission Properties of Woven Cotton Fabrics Open
The aim of this study was to develop statistical models for predicting the air permeability and light transmission properties of woven cotton fabrics and determine the level of correlation between the two parameters. Plain woven fabrics we…
View article
Effects of Fiber Linear Density on Acrylic Carpet Performance Open
The appearance of cut-pile carpets deteriorates due to foot traffic and long term heavy loadings. This deterioration is generally seen as a fuzzy appearance due to loose fibers and fuzz on the carpet surface or as thickness loss. The fiber…
View article
Design of Hybrid Yarn with the Combination of Fiber and Filaments and Its Effect on the Denim Fabric Performance Open
Consumer choice and behavior are changing and focusing on comfortable clothing along with fitting. Elastic yarn or fabric is necessary to achieve this comfortableness. By making elastic yarn and using elastic material in fabric production,…
View article
Models to estimate longitudinal compressive strength of Brazilian hardwood based on apparent density Open
As wood is an orthotropic and natural material, there are several properties required for its use in civil construction. The apparent density has been used to estimate physical and mechanical properties of wood, as it is easy to determine …
View article
Analysis of shear characteristics of woven fabrics and their interaction with fabric integrated structural factors Open
Behavior of woven fabrics during complex deformations is most influentially affected by their shear behavior. Shear characteristics of woven fabrics can be explained by fabric shear rigidity and shear hysteresis. In this study, the effects…
View article
A Comparative Strength Analysis of Denim Fabrics Made from Core-Spun Yarns Containing Textured Microfilaments Open
Denim fabric is one of the most popular casual wear fabrics worldwide. The performance characteristics of denim fabrics have been improved by using functional fibers and elastane to make them comfortable to wear. Elastane fibers with high …
View article
Analysis of physical-mechanical performance of two-level Open
The article presents the results of the analysis of physical and mechanical properties of 4 variants of knitted fabric. Samples of knitted fabrics were obtained using linear density 17.3 tex polyester yarn, linear density 35 tex x2 spun po…
View article
Liquid Moisture Transport in Cotton Woven Fabrics with Different Weft Yarns Open
Moisture transport in fabrics influences the thermal comfort of clothing due to drainage of sweat secreted by the human body. The moisture transport through textile materials takes place in two ways: water-vapor transport and liquid moistu…
View article
Optimization of the novel jute retting process to enhance the fiber quality for textile applications Open
This study introduces an innovative chemical retting approach, systematically optimized via Grey relational analysis, to achieve jute fibers that exhibit desirable characteristics of softness, high tensile strength, and suitability for spi…
View article
Evaluation of Kenaf Yarn Properties as Affected by Different Linear Densities for Woven Fabric Laminated Composite Production Open
Evaluation of kenaf yarn
View article
Investigation of the effect of different structural parameters of cotton woven fabrics on their air permeability Open
This study presents an investigation of the effect of different structural parameters of cotton woven fabrics on their air permeability. For this purpose, 24 fabric samples having different structural properties were obtained by using thre…