Burnishing (metal)
View article
Wear resistance enhancement of titanium alloy (Ti–6Al–4V) by ball burnishing process Open
The objective of the research was to improve the wear resistance of titanium alloys by ball burnishing process. Burnishing process parameters such as burnishing speed, burnishing feed, burnishing force and number of pass were considered to…
View article
Surface treatments for controlling corrosion rate of biodegradable Mg and Mg-based alloy implants Open
Due to their excellent biodegradability characteristics, Mg and Mg-based alloys have become an emerging material in biomedical implants, notably for repair of bone as well as coronary arterial stents. However, the main problem with Mg-base…
View article
Evaluation of optimized surface properties and residual stress in ultrasonic assisted ball burnishing of AA6061-T6 Open
Ultrasonic assisted ball burnishing process is a newly developed alternative of conventional ball burnishingprocess that enhances the surface properties of engineering materials through imposing both the static anddynamic loadings. The pro…
View article
A Comparative Study of the RSM and ANN Models for Predicting Surface Roughness in Roller Burnishing Open
In this paper the comparison of the surface roughness prediction models based on response surface methodology (RSM) and artificial neural networks (ANN) is described. The models were developed based on five-level design of experiments cond…
View article
Influence of Ball-Burnishing Process on Surface Topography Parameters and Tribological Properties of Hardened Steel Open
The ball-burnishing process is a particular finishing treatment that can improve selected properties of different materials. In the present study, the ball-burnishing technique was used to investigate the effect of input parameters of proc…
View article
Hardening effect and fatigue behavior enhancement through ball burnishing on AISI 1038 Open
The objective of this paper is to present a comprehensive study of the effects of ball burnishing on the low cycle fatigue endurance of cylindrical specimens subjected to alternative bending stress, by constructing fatigue S-N curves to ev…
View article
Burnishing of FSW Aluminum Al–Cu–Li Components Open
Ball-burnishing is presented herein as a mechanical surface treatment for improving mechanical properties after the friction stir welding process. Ball-burnishing provides good surface finish, high compressive residual stresses, and a hard…
View article
TEM analysis of surface layer of Ti-6Al-4V ELI alloy after slide burnishing and low-temperature gas nitriding Open
Gas nitriding is one of the more effective ways of improving wear and corrosion resistance of titanium alloys, but this treatment performed at a high temperature degrades their high specific strengths. Therefore, we have subjected a Ti-6Al…
View article
Ball-burnishing effect on deep residual stress on AISI 1038 and AA2017-T4 Open
Ball-burnishing induces compressive residual stresses on treated materials by the effect of plastic deformation. The result is an increase in the fatigue life of the treated part, retarding the initiation of cracks on the surface. Compress…
View article
Research on the mechanism of the two-dimensional ultrasonic surface burnishing process to enhance the wear resistance for aluminum alloy Open
The gradient nanostructure is machined on the aluminum (Al) alloy by the two-dimensional ultrasonic surface burnishing process (2D-USBP). The mechanism of why the gradient nanostructure enhances wear resistance is investigated. The mechani…
View article
Effect of Machining Parameters on Surface Properties in Slide Diamond Burnishing of Aluminium Matrix Composites Open
The implementation of light weight construction often requires the use of composites such as aluminium matrix composites. However, machining of suchlike materials is more difficult compared to unreinforced alloys. The heterogeneous structu…
View article
Experimental Study on the Mechanical Effects of the Vibration-Assisted Ball-Burnishing Process Open
Burnishing processes are effective methods for treating pieces to increase their durability and roughness. Studies reveal that traditional burnishing can be strongly improved with the assistance of external energy sources. A vibrating modu…
View article
An investigation into ball burnishing process of magnesium alloy on CNC lathe using different environments Open
Ball burnishing routine permits through a simple, fast and economical manner to obtain free chip on the manufactured parts. It generates a superior surface finish by rotating a ball tool against a workpiece. The burnishing process is commo…
View article
Improving surface properties of Fe-based laser cladding coating deposited on a carbon steel by heat assisted ultrasonic burnishing Open
In the present study, the combination of ultrasonic burnishing and heat treatment were applied on a laser cladded Fe-based coating. Besides ultrasonic burnishing at room temperature (UB), two combination strategies of ultrasonic burnishing…
View article
Effect of Wood Preservatives on Surface Properties of Coated Wood Open
Effect of wood preservatives (waterborne and organicborne) on the performance of surface finishing properties is investigated. Sapwood of scots pine, ( Pinus sylvestris L.), oriental beech ( Fagus orientalis Lipsky), and chestnut ( Castane…
View article
Surface Texture Analysis of Hardened Shafts after Ceramic Ball Burnishing Open
This article represents the results of testing the surface condition of shafts manufactured by the burnishing process. The shafts with a hardness of approximately 62 HRC (Rockwell C). were burnished with a ceramic ball (Si3N4), where the f…
View article
Fine Surface Finish of a Hardened Stainless Steel Using a New Burnishing Tool Open
The objective of this research is to develop a new ball-burnishing tool embedded with a load cell integrated with a CNC lathe, to improve the surface roughness and hardness of the fine turned SUS420J2 (equivalent to AISI420) stainless stee…
View article
Macroscale Superlubricity Accomplished by Sb2O3-MSH/C Under High Temperature Open
Here, we report the high-temperature superlubricity phenomenon accomplished in coatings produced by burnishing powders of antimony trioxide (Sb 2 O 3 ) and magnesium silicate hydroxide coated with carbon (MSH/C) onto the nickel superalloy …
View article
Surface flatness and roughness evolution after magnetic assisted ball burnishing of magnetizable and non-magnetizable materials Open
The burnishing process is applied to improve the surface roughness and hardness. The goal of the reported research was to evaluate the machining conditions on magnetisable and non-magnetisable materials by the novel permanent magnetic assi…
View article
Surface Layer Modification by Cryogenic Burnishing of Al 7050-T7451 Alloy and Validation with FEM-based Burnishing Model Open
As one of the chipless machining processes, burnishing has been performed on manufactured components as the final operation to improve the surface integrity, including reduced surface roughness and increased surface and subsurface hardness…
View article
Improvements of surface tribological properties by magnetic assisted ball burnishing Open
The effect of the magnetic assisted ball burnishing on a general, C45 steel was investigated considering tribological aspects. In engineering practice, the tribological properties of machined surfaces are characterized by amplitude roughne…
View article
Finite Element Analysis of Surface Integrity in Deep Ball-Burnishing of a Biodegradable AZ31B Mg Alloy Open
As an effective and affordable technique, deep ball-burnishing has been applied to induce the plastic deformation of material, thus resulting in an increased surface hardness, compressive residual stress, and finish quality. Recent researc…
View article
Enhancing Surface Integrity of Additively Manufactured Inconel 718 by Roller Burnishing Process Open
This work presents the effect of burnishing process including burnishing force, burnishing speed and burnishing conditions on surface properties of Inconel 718 alloy fabricated by laser powder based fusion additive manufacturing. As-built,…
View article
Research on the promotion mechanism of surface burnishing process by two-dimensional ultrasonic vibration Open
Tangential ultrasonic vibration and vertical ultrasonic vibration are applied in the surface burnishing process (SBP) to study the improvement mechanism of both on the machining performance. The force in the machining process is collected …
View article
Investigation of wear resistance of selected materials after slide burnishing process Open
The article presents the research on the impact of slide burnishing process carried out with use of various ceramics on friction and wear of steel elements. In addition, surfaces after grinding, lapping and polishing processes were tested.…
View article
Selected Properties of the Surface Layer of C45 Steel Parts Subjected to Laser Cutting and Ball Burnishing Open
In this article, we report the results of experimental studies on the impact of ball burnishing parameters on the roughness, microstructure and microhardness of the surface layer of laser-cut C45 steel parts. We also analysed the distribut…
View article
A Comparative Analysis of Chemical, Thermal, and Mechanical Post-Process of Fused Filament Fabricated Polyetherimide Parts for Surface Quality Enhancement Open
Additive manufacturing technologies are increasingly being used in production systems because they shorten product development time and production cost, but surface integrity remains a limitation to meet the standards set by conventional m…
View article
Plastic flow behavior for machined surface material Ti-6Al-4V with rotary ultrasonic burnishing Open
A hybrid machining technology with rotary ultrasonic roller burnishing process has been developed. There is no material removal when the machined surface is generated by the hybrid ultrasonic burnishing as comparing with other conventional…
View article
Influence of Slide Burnishing Parameters on the Surface Layer Properties of Stainless Steel and Mean Positron Lifetime Open
This paper presents the results of an experimental study on the impact of slide burnishing on surface roughness parameters (Sa, Sz, Sp, Sv, Ssk, and Sku), topography, surface layer microhardness, residual stress, and mean positron lifetime…
View article
Finite Element Analysis of Ball Burnishing on Ball-End Milled Surfaces Considering Their Original Topology and Residual Stress Open
Ball burnishing is a superfinishing operation whose objective is the enhancement of surface integrity of previously machined surfaces, hence its appropriateness to complement chip removal processes at the end of a production line. As a com…